Related
I will probably deserve a flaming for these questions but i have searched and have read the wiki as completely as i can.(i have reading large amounts of info problems)
trying to upgrade my original BA wm2003 (upgraded to WM5 from this website months ago) to the latest helmi rom.
i have lost my original device data note i was sure i backed up.
1. cannot understand the proceedure for changing the operator info from command window with setoperator??
2. seems to be a program left out cusTSK it wont transfer the normal way and says beacause it is read only **edit now ok because i copied directly to SD card using card reader.**
3. i have tried to put the device into bootloader screen but then activesync is not active and i get a connection error.
4. when i try to flash with BAupgrade i get a error 100: model ID error but i cant find any descriptions of what to do next on google or these forums.
i have read the readme's several times and i just cant see where im going wrong.
this is about the 5th hour of trying and i think my head is going to explode.
so if you have time to explain/flame(dont hold back either) me where im going wrong, i will be very grateful.
How to set operator - revised edition (by me )
http://forum.xda-developers.com/showthread.php?t=291426
ok thanks for that.
i am assuming this is a nesscessary proceedure to complete or the upgrade wont work at all?
and it doesnt make sense but i need to know,
if the device came as a MDAIII from T mobile i need to set the operator to the t-mobile code?
or
now i previously unlocked the PDA to any network but i use orange, i need to set it to the orange operator code?
ok i have flashed the rom ok please no need to post solution.
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
hello: iam trying to unlock my phone so i can update the sotware to windows mobile 6 can anybody help me with this ?
Ok. Several things: 1) If you have the default T-mobile ROM on your Wing, you already have Windows Mobile 6.1. 2) If you post the same question in multiple subforums, you are very likely to be ignored. 3) If you only wish to CID unlock the phone, then all you have to do is flash any other ROM found on this forum. Be sure to search in there for "How to Flash" before opening another thread asking for help. Thanks!
what do u mean default T-mobile Rom?
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
fluoroseal said:
please excuse me iam new at this. and iam pretty sure that i do not have mobile 6.1 on my wing... could you help me in this matter? 1. i need to unlock the phone so i can put windows mobile 6.1 on the phone ... i would appreacte verey much paul....
Click to expand...
Click to collapse
Alright. If you bought this phone directly from T-mobile US, then you do already have Windows Mobile 6.1. Also, to check for sure which version you have, you can go to Start->Settings->System->About. It will display what version of Windows Mobile you have.
I suggest you start with the wiki. Since you keep asking to 'unlock' your phone to be able to flash a new ROM i'm going to guess that you don't know what your doing. Make sure to read up on what is required to flash a new ROM. If you need any more assistance please make sure to ask the correct question in the correct forum and I'm sure everyone will be willing to help. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
@elazullizard, unless something has changed, the Wing DOES NOT come stock with 6.1, it comes with 6. Now like I say, that may have changed, but I just bought a brand new in the box Wing manufactured in November 2008, and it booted into stock plain jane T-mobile 6. So yeah, this guy does indeed need to CID unlock and upgrade to 6.1 or 6.5.
thank you. and its hera 110 rom ver. 4.26.531 wwe and i do have windows 6 professional but i would like to cid my phone so it can take a new rom? and you help in this mater?
Yes, first of all soft-reset your device using the little hole on the left hand side of it, as soon as you press the little button in the hole, press and hold down the camera button until the 3 color bootloader screen is displayed...confirm that your IPL/SPL is above 4 and reply back to me with the exact number and we can get you started from there.
hello there ther a little problem I use the divce on and everday as my life line for work and i do not have a spare. and this forum takes forever for someone to get back to u ,
so if we can talk head up on yahoo or let me know when u are gona be on this site so we can do this together thank u paul
its rom ver 4.26.531/wwe
radio ver 03.21.90 and runing windows mobile 6 professional.......
Well my yahoo IM is listed in my profile information, and I still need to know your IPL/SPL in order to help you.
Dear friends,
I use T-Mobile Wing. 2007 manufacture.
Can u help me to upgrade it. It uses Windows Mobile v6.0. I wanted to change it to Window Mobile v6.1 or v6.5.
I use it with another sim card. Not T-Mobile. But it is working properly.
How can I do this?
IPL 4.10.0002
SPL 4.10.0000
Thanks a lot...
P.S. Can I use GPS from my mobile. I couldn't found it.
There are plenty of posts that teach you how to flash custom ROMs. If you don't know where to start try searching for "how to hard SPL." You can flash custom ROMs without having your phone hard spl'ed by using USPL. If you decide not to use hard spl there is a great change that you will brick your phone and will no longer be able to use it again. After all you have to do is search for a flashcenter or use mine http://mywing.info/dl/Flascenter.rar . As for you GPS question, there are plenty of gps programs out there. You just need to buy either an external bluetooth gps receiver or a USB gps receiver. pair it with your phone and your done.
Evenin' all.
Might be a long shot, and I think I walready know the answer but thought I would just double check quickly.
I have about 100 HTC TyTnII phones that are on windows mobile 6.1 and need be downgraded to windows mobile 6.0 due to incompatible software.
Each day i am also having to do the same with a small handful of other TyTnII phones.
I have flashed a load of them with no problems using USB. Yesterday i tried to use an SD card which also worked fine on a test phone that we use for development, but it wont work on phones arriving direct from the factory.
Im pretty certain that its because i ened to unlock the CID (???) or flash the SPL (???) but this is time consuming and tedious.
Is there anyway of doing this part using an SD card? If not, what is the fastest way to do it on the road or on site when i dont have access to my computer?
Any ideas that you can bounce at me would be appreciated, and also it would be a good help if you can verify if what i have said is correct.
Cheers guys.
-AJ
Moved as not ROM Development.
As long as you use the original carrier ROM then CID won't be an issue.
Sorry about posting in the wrong place, was searching the forum for an answer and see a post in this area regarding a similar issue.
When you say original carrier ROM, do you meant the extaxt same rom that came with the phone, or a ROM from the same network provider ect?
They are English Orange WM6.1, so would I need any other English Orange WM6.0 rom? Or am i (probably) mistaken?
Your correct CID checks the vendor ID so you have Orange WM6.1 you will want Orange WM6 ROM as then vendor ID matches.
The other option is to just hard-spl them all wouldn't take long with laptop 5 mins each then you can bypass vendor ID check. "may be easier as don't know if Orange WM6 easily available?"
Would I be able to use WinRar to extract the NBH file from here and use that to flash the phone via SD Card without modifying or touching anything else on the phone?
RUU_Kaiser_ORANGE_UK_1.81.61.2_radio_sign_22.45.88.07_1.27.12.29R_Ship.exe
Just wondering if anyone has got any more info on this?
avisonjohn said:
Just wondering if anyone has got any more info on this?
Click to expand...
Click to collapse
Well if they branded Orange it will work, lol you got so many i thought you would have tried it by now
Ok here is my problem with the shift. I cannot get into snapview. I mean it not there. I have done the "clear shift" from HTC. Updated the ShagCTL( vista). I have even tried to flash a new rom to the device. No Love. What else can i do to get the WINMO side working again.
When I tried the flash a new rom(Thinking that I had somehow bricked or corrupted the rom) I get to the bootloader and I even see the usb connection in the tri-colored screen. but I cannot get the rom flashed.
BTW .. I have the 9500 CMDA version.. If anybody has any further ideas please let me know.. I would love to use this device but without sound( which I foun out is controlled by the WinMo side) it pretty much useless to me
Help
double check or clarify which shift you have because CDMA is x9000 and GSM is x9500. that should help you to find the correct rom you should be looking for on the forum with seach and trying to flash to your shift
Still no Joy.
cybericebyte said:
double check or clarify which shift you have because CDMA is x9000 and GSM is x9500. that should help you to find the correct rom you should be looking for on the forum with seach and trying to flash to your shift
Click to expand...
Click to collapse
You are correct it is the x9000...
in the forum there is a link for the orginal rom I also hjave this but at current do not have any way to upload or make available to you for about 2 months or you can try and MP comex she should have a copy of the orginal CDMA rom as well. also check to be sure that the display brightness is turned up all the way on the mobile side you can also try some of the other tools. last question is how did your snapvue get in the state that it is currently in?
The only thing I can think of is when I did a full restore of the device and it asked if I wanted to overwrite the MBR . I think that is what did it... That is the only thing I can think of.. but at the same time they should be separate at least that was my thought.
they are separate and 1 should not affect the other