Related
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
where are you trying to install it too? does it say anything else besides unsuccessful?
freddiemac1 said:
I have a stock ATT Tilt, with the stock ROM (6.0)
I am trying to install SPB Mobile Shell. I have never used the software before and downloaded the trial. Each time I try to install the CAB from my device, it is unsuccessful.
Any suggestions? (And yes, I have redownloaded the software and tried to install it a number of times)
Thanks
Click to expand...
Click to collapse
Never had this problem, are you using the right version?
I have downloaded it three times from spb's own site, both to my computer and directly to my device. (I don't have a windows machine, so I am downloading the CAB files). I even downloaded the EXE file and extracted the CAB from it.
Each time as I click on the CAB file (on my device), it says Installation was unsuccessful.
Any thoughts?
Mobile Shell
Have you made sure to check it's box in the "today" settings page to activate it on "today". Also remember to uncheck everything else on that page.
It's not installed...so there is nothing to check. Just trying to figure out how to install...
freddiemac1 said:
It's not installed...so there is nothing to check. Just trying to figure out how to install...
Click to expand...
Click to collapse
i'm having the same problem! i can't find any way to fix it either!
Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.
asfoor said:
Go to Settings/Today/ Items and uncheck all items on your today screen. Load the SPB onto your SD Card, however when you click it and it then prompts you to the location installation, leave it on Device.
Click to expand...
Click to collapse
done that and still does not work
here you will be OK with this trial version...
http://rapidshare.com/files/177073963/SpbMobileShell2.arm.cab
Thank you so much. It finally installed....but
However, it is only v. 2.0.0. Anyone know where to get the latest version THAT WILL INSTALL?
You can download direct from SPB themselves, or a software provider like Handango lets you download the trial version.
I have seen the same issue with installations of this too. I found that the installation .cab file was too small and so (althought it 'appeared' to install) it failed. I got round the problem by downloading directly from the PC and then moving the cab to the SD card before installing from there.
This would not account for your failed PC installation but may be worth a go if you still find it an issue.
Regards
Tony
Hi,
I had the same problem last night, the CAB would not install from the SD card or Main Memory.
In the end i downloaded the EXE from SPB and installed via Windows Mobile Device Center (old ActiveSync ) and it was fine.
Cheers
Dan
Hello...i am new in windows mobile, and my kid's cp running 6.1 in asus p320 asking me to help her to change it in a finger friendly phone, but problem was that everytime i install spb direct from the spb site, got an unsucccesful message at the end of the installation, were it took me so much time just to find out (not to mention it stuck from 43% installation indicator) its unsuccesful. tried to install it to the device itself but says not enough memory, so i used my storage card instead. Pls help and tell me exactly how to install it.
thanks and more power.
I have created this post because I was honestly baffled by the NAND install threads for the Vogue that I found, that claimed to be "straightforward" and simple, but the people who wrote them leave a lot of gaps that you have to figure out. Perhaps they have been doing it for so long now, that they just 'assume' you will know stuff, so here are step-by-step instructions for someone who has zero experience with Android, and all they know is that they have a Window mobile phone.
So, Here is the NAND install process (will install Android to your internal memory, which is much better than running from the SD card) for the HTC Vogue (240x320), CDMA or GSM. I believe this is the most straightforward tutorial on this entire site, and all files you need are provided in this post; no file-hunting necessary like with other tutorials. Keep in mind, this process will wipe your internal memory and replace it with Android, so you should backup any personal files you have stored on the phone. If you have a CDMA phone (Verizon, Sprint, etc.) then you should make sure to backup your Contacts using a 3rd party program. GSM phones however (ATT, T-Mobile, etc.), typically store their contacts to a SIM card, which is not altered by this process. You do not need to backup your SD card, since it is also not altered when installing Android.
Dependencies: This process works for any ROM release that provides an "androidinstall.tar" file in their download package.
First and foremost, make sure you have unlocked your phone ("2.31 CoKe" HardSPL for CDMA Vogues). If you have ever flashed a custom Windows ROM from this site or ppcgeeks.com, to your device, then you most likely already have an unlocked phone. If not, perform the steps HERE first, before continuing AND flash to a custom Windows Mobile ROM (non-stock) and make sure your phone is provisioned (you can get and receive calls), and that you can use data (if you have a data plan).
1. Wipe your SD card, and make sure it is formatted FAT32
2. Create a new folder in the root of the SD card called "andboot"
3. Download the ROM release package of your choice (for example, you can download the 240x320 version of Myn’s Warm Donut - [RLS 5 - 04/24/2010] HERE)
4. Extract files from STEP 3 and put ONLY the "androidinstall.tar" file in the andboot folder on the SD card, by itself (no other files are needed)
5. You are DONE putting files on your SD card. At this point, put the SD card into your phone.
6. Download the latest NBH file that begins with "voguimg-240x320-..." (needed for all Vogue Android ROMs): HERE
7. Download the RUU Update Utility (needed for all Vogue Android ROMs): HERE
8. Rename the NBH file to from STEP 6 to "RUU_signed.nbh" and place it inside the folder with all the other files from STEP 7
9. Now, put your Vogue in bootloader mode: Hold down power, camera, and the small reset hole (with your stylus), until you see the tri-color screen, and it says "Serial" at the bottom
10. Plug your phone into your computer, and the "Serial" text should change the "USB"
11. Now, run the "ROMUpdateUtility.exe" from STEP 7, and click the "Next" or "OK" buttons to go through the flash/ROM update process, until your phone shows a progress bar on its screen and is updating.
12. As soon as that progress bar finishes the phone will automatically reboot; at this point unplug the phone from the computer
13. Now, watch carefully during the Linux boot process...there will be a quick message that says "Hold down Volume Up or D Pad". Just press and hold the center D-Pad button until you see the screen change to the installer menu. If you happen to miss it, and it continues loading, then just use your stylus to press the reset button (it will not hurt the phone or any files to try again as many times as you need to.)
14. You will now see a black and white menu. Select option 1, to "Install..."
15. Select "Yes" on the recommended prompt that follows
16. Once it says the Install process is complete and it returns you to the menu, just reboot your phone with the reset button
17. At this point just WAIT. Do NOT press the volume up button again, and do not do anything until you see the Android desktop. You may get an error saying that it could not find a file or something like that, but just ignore it...do not get impatient! Pretty soon the Android progress bar will show on the screen (might take up to 5 minutes), then the Android desktop will load.
DONE. Enjoy Android on your Vogue! You can now delete all the files on the SD card if you wish...Android will recreate anything it needs on boot-up each time.
MASS STORAGE FIX (USB to PC): You can get the Mass Storage fix HERE so that your storage card will show up as a drive on your computer. This is a widget, and not ROM specific, so should work for any Android ROM.
KAISER WI-FI FIX (for the Kaiser phone ONLY!): Download the Wi-Fi fix HERE (intended for use with 'myn's Warm Eclair RLS1', linked in STEP 3)
I do not ask for donations, just say 'Thanks' if this helped you.
***
UPDATE: This Thread is now featured on Wired.com's News Site!! Link: http://www.wired.com/gadgetlab/2010/04/windows-mobile-android/
***
please elaborate on step 8. what are we extracting here
Great post. Just some clarifications I thought would be helpful.
1. reminder to all - you can use SDHC cards for this, those being greater than 2gb, but make sure you format them to FAT32.
5. in some instances there are androidupdate.tar files that go with the build too, in which case that too needs to be placed in the same andboot folder
8. clarification, you'll be replacing the RUU_signed.nbh file with the 320 nbh file you download. So, you'll have to delete the ruu_signed.nbh that came with the update utility, and rename your downloaded 320 nbh to ruu_signed.nbh and place it in the update utility folder so it uses that file instead.
9. to enter bootloader mode you have to press those 3 buttons down for about 2 seconds, not just a quick tap. This bootloader is your failsafe fallback to reinstall if your operating system goes funky.
13. If volume up isn't working for you, try holding down the button in the middle of the directional pad. The last nbh file I used required this instead of the awkward volume-up. Regardless, be sure to do this quickly as soon as the phone reboots itself.
16. After the install process is complete you'll be brought back to the same menu you arrived at by holding down the button on startup, you may then select "update" or "upgrade" from that same menu to activate the androidupdate.tar file you may have copied to your andboot folder. Once done, just select "exit" or reset.
17. He's not kidding, first boot can take a very long time.
If you run into problems and just need a functional phone for a bit, download the nfsfan rom (or any other custom roms), put phone into bootloader and run the nfsfan rom utility from your windows desktop. Don't reinstall a locked carrier-specific rom that you might have used to update your radios otherwise I understand your Coke bootloader gets wiped out and you'll have to do that again. Alternatively, there is an older, dummy-proof Android ION build that will install the entire ION build through the rom update utility to your nand at http://sourceforge.net/projects/androidhtc/files/2009-12-17/androidinstall.zip/download
I'm no super-expert so if I have any misinformation in my post, or there are other shortcuts, please feel free to edit it or let me know and i'll modify it.
MikeMurphy said:
Great post. Just some clarifications.
8. clarification, you'll be replacing the RUU_signed.nbh file with the 320 nbh file you download. So, you'll have to delete the ruu_signed.nbh that came with the update utility, and rename your downloaded 320 nbh to ruu_signed.nbh and place it in the update utility folder so it uses that file instead.
Click to expand...
Click to collapse
where is this file?
CasopoliS said:
where is this file?
Click to expand...
Click to collapse
You're looking for the vogue 320 files, not the vogue eclair 320 files unless you're installing an eclair (2.x) build.
The .nbh files are usually referenced on the build thread in the forums, but if they are not head over to http://sourceforge.net/projects/androidhtc/files/ and download the latest.
(NOTE: I suggest you run at least the Feb 23 build at http://it029000.massey.ac.nz/vogue/files/?C=M;O=D as it enables the openGL support)
MikeMurphy said:
You're looking for the vogue 320 files, not the vogue eclair 320 files unless you're installing an eclair (2.x) build.
The .nbh files are usually referenced on the build thread in the forums, but if they are not head over to http://sourceforge.net/projects/androidhtc/files/ and download the latest.
Click to expand...
Click to collapse
the latest isnt there its here
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
now now, gents, you're both right - dzo's latest are in one spot, vilord's latest are in the other, and they don't always contain everything the other does. vilord mentioned trying to get them in one spot but I don't know if there's been any progress on that.
it keeps hanging up at the progress bar and both stay at 0% it looks like the active sync is gone once in bootloader it goes gray and then its gone from tray in bottom right corner. it seems like once in bootloader mode i have no active sync connection it just hangs Then the updater goes into its recovery any help please
razorr69 said:
it keeps hanging up at the progress bar and both stay at 0% it looks like the active sync is gone once in bootloader it goes gray and then its gone from tray in bottom right corner. it seems like once in bootloader mode i have no active sync connection it just hangs Then the updater goes into its recovery any help please
Click to expand...
Click to collapse
go into bootloader before plugging your phone in by pressing and holding power button, camera button, and then use stylus to hit reset button.
once you get into bootloader, plug your phone in and then run the rom update
incubus26jc said:
go into bootloader before plugging your phone in by pressing and holding power button, camera button, and then use stylus to hit reset button.
once you get into bootloader, plug your phone in and then run the rom update
Click to expand...
Click to collapse
that is the way that i have been doing it as per the instructions, Any other suggestions? I just did a hard reset and restored the phone to out of the box if that helps out any.
thanks
razorr69 said:
that is the way that i have been doing it as per the instructions, Any other suggestions?
thanks
Click to expand...
Click to collapse
the only reason i said that is because active sync should have nothing to do with it. i dont think active sync should come up or shut down during this process. Do you have the RUU_signed.nbh named properly?
razorr69 said:
that is the way that i have been doing it as per the instructions, Any other suggestions?
thanks
Click to expand...
Click to collapse
Activesync has nothing to do with updates via the rainbow screen bootloader and will not sync.
You have already install the Coke bootloader? What OS are you running?
Thank you so much. Been needing something like this since the other NAND tutorials for Android didn't tell you what files to use or had outdated/non-working links.
MikeMurphy said:
Activesync has nothing to do with updates via the rainbow screen bootloader and will not sync.
You have already install the Coke bootloader? What OS are you running?
Click to expand...
Click to collapse
6.1. I followed the inst.
put the tar in andboot folder on sd
renamed the voug img file put it in the androidinstall folder on my desktop
put the rest of the files from myns donut into the androidinstall folder
then bootloader plug in usb then rom updater
everything goes fine intil it hangs on the progress bar at 0%
razorr69 said:
6.1. I followed the inst.
put the tar in andboot folder on sd
renamed the voug img file put it in the androidinstall folder on my desktop
put the rest of the files from myns donut into the androidinstall folder
then bootloader plug in usb then rom updater
everything goes fine intil it hangs on the progress bar at 0%
Click to expand...
Click to collapse
What OS are you running on your computer?
The ROM update utility really just installs the .nbh file which is somewhat of a front-end loader mechanism. Once that file is installed, then the phone resets, you hold down a button and you enter into the menu that lets you actually install android from the androidinstall.tar file in your andboot folder.
Here is a fail-proof method that I think will resolve your goofy androidinstall folder.
Download this
http://74.53.45.2/~evadmin/nfsfan/Public Releases/Vogue 6.5/ROMS/NFSFAN's WM6.5 1.00 FINAL ROM.rar
Then replace the .nbh file with the vogue 320 nbh. Then, run it when your phone is already in the bootloader screen.
Excellent post
I'm linking this from Warm Donut on the first post.
MikeMurphy said:
What OS are you running on your computer?
The ROM update utility really just installs the .nbh file which is somewhat of a front-end loader mechanism. Once that file is installed, then the phone resets, you hold down a button and you enter into the menu that lets you actually install android from the androidinstall.tar file in your andboot folder.
Here is a fail-proof method that I think will resolve your goofy androidinstall folder.
Download this
http://74.53.45.2/~evadmin/nfsfan/Public Releases/Vogue 6.5/ROMS/NFSFAN's WM6.5 1.00 FINAL ROM.rar
Then replace the .nbh file with the vogue 320 nbh. Then, run it when your phone is already in the bootloader screen.
Click to expand...
Click to collapse
Thank you will try it now. Running xp pro on my desktop
razorr69 said:
Thank you will try it now. Running xp pro on my desktop
Click to expand...
Click to collapse
XP Pro always worked well for me. I'm running Win7 x64 ultimate and recently my phone was recognized as a USB Sync Device in the bootloader mode which doesn't work for the rom update utility. This was occurring both with and without the installation of the MS Mobile Device Center app. To solve this I installed XP Mode and attached the usb device to the XP Mode and it recognized correctly as the Qualcomm MSM thing.
Just an FYI.
MikeMurphy said:
XP Pro always worked well for me. I'm running Win7 x64 ultimate and recently my phone was recognized as a USB Sync Device in the bootloader mode which doesn't work for the rom update utility. This was occurring both with and without the installation of the MS Mobile Device Center app. To solve this I installed XP Mode and attached the usb device to the XP Mode and it recognized correctly as the Qualcomm MSM thing.
Just an FYI.
Click to expand...
Click to collapse
when i go into my computer it just says mobile device
razorr69 said:
when i go into my computer it just says mobile device
Click to expand...
Click to collapse
same result error 262 update error. i dont get it this is so simple. 1 of the 4 steps is establish a connection with active sync dont know how to do that once im in bootloader mode it's like there is no connection but the phone shows the progress bar
Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee
okay, so i installed some custom rom from xda-developers site, and after i installed it, i started file explorer.. files on my storage card (folders), was APPLICATIONS?!?!
i meen, i had folder called "music", and after i installed that rom the folder became application, so i formated storage card... same thing , i create folder, after a minute, or two, the folder transforms into the application, and i can't access on xperia x1, only from PC... THEN, i install (OMG ROM) also from forum, that worked fine yesterday, but now, SAME THNIG, after a while, folder transforms to application (.exe).. is it a virus? (beacause i reinstalled the rom, and still same)
and, when i run (clean storage) application on phone, it says that the format will also format the NAND flash.. what is the nand flash? is there olinex ? what should i do?? please help
milancex said:
okay, so i installed some custom rom from xda-developers site, and after i installed it, i started file explorer.. files on my storage card (folders), was APPLICATIONS?!?!
i meen, i had folder called "music", and after i installed that rom the folder became application, so i formated storage card... same thing , i create folder, after a minute, or two, the folder transforms into the application, and i can't access on xperia x1, only from PC... THEN, i install (OMG ROM) also from forum, that worked fine yesterday, but now, SAME THNIG, after a while, folder transforms to application (.exe).. is it a virus? (beacause i reinstalled the rom, and still same)
and, when i run (clean storage) application on phone, it says that the format will also format the NAND flash.. what is the nand flash? is there olinex ? what should i do?? please help
Click to expand...
Click to collapse
HAHAHA
LOL!
it is usual virus. Your actual folders was just marked as HIDDEN! : ) )
you had to check "View hidden files and folders" in your explorer!
LOL again !
what's so funny? i know that my actual folder is hidden, when i "check" (show all files) option, the folder is shown, but i want to remove the virus completly..
i reintalled the rom, how can there still be a virus?? thank you
every time you connect you pda to pc you get a virus : )
i think all your removable flash devices infected, so you need great cleanse : )
or try to connect device only via active sync, may be virus can't use this way.
ooh, but how to REMOVE virus? i want my pc, and my pda virusfree
example : i connect pda to pc, and now pda and pc are infected, so i plug different flash drive, and now that flash drive is also infected, then i plug flash drive into laptop, so now, the virus is in my pc, pda and laptop
will kaspersky internet security (PC) help?
you have to send one of the "switched" *.exe to http://www.virustotal.com/
so you can get name of virus
next you have to google removal tool special for this virus
it is fastest way
i did that, and the result is
Kaspersky 7.0.0.125 2010.10.06 Worm.Win32.AutoIt.sx
my eset could not recognise it, but it was long ago since i update it, so i downloing kaspersky... hoppe it will help
i forgot, is virus on mem stick of xperia, or in phone memory? because i don't know how to scan phone memory? :S
i not sure virus can get to phone memory...
anyway antivirus too : )
http://www.kaspersky.com/mobile_downloads
never used an antivirus on WM before... but download this & see what it says about your phone memory / SD card
Best of luck
I tried android on x1, but its really slow, and i want to try wm 6. 5 but i dont know how to flash it. Can someone write me the instructions? Thanks!
Hi,
here in the ROM section is a great thread with video instruction. -> click here <-
but before you can flash a ROM you must first HARDSPL your phone -> here's how <-
Finaly there are 2 ways to flash, one way is via SD card -> click here <- or via PC with active sync -> click here <-
I think via SD card is the simplest and easy way. But it is your choose
If you still have question ask me but before read the post of the threads I post you because they should answer your questions.
BTW: try to search for your problem, if you dont like the searchform in the forum use google: "<your problem in short words> site:xda-developers.com"
Thanks man
Sent from my X8 using Tapatalk
hey,when i try to intall hard spl,it says that my mobile phone isnt connected...but it is...how to solve it?
do you have installed active sync (xp) or mobile device center(win7) this program build the connection.
neoofoox said:
do you have installed active sync (xp) or mobile device center(win7) this program build the connection.
Click to expand...
Click to collapse
I guess he's still in android..
Can you enter the triple colored screen?(Put the phone off, remove battery for a sec, place back, press volume down, and then press the power button. KEEP IT PRESSED! then wait until you see the 3 colored screen)
If you can, keep it in that 3 colored screen, and then start the hard spl installer on the computer.
Yes i can, thank you!
Sent from my X8 using Tapatalk
Ok,i did and nothing.how can i fix it?
looks like your your phone isn't recognized by activesync (xp) or device center (vista & win7) on pc.
that's what "your phone needs to be synced!" in the instructions means. you don't have to set up a sync-partnership (contacts etc), it's enough if you can browse the phone from explorer.
if you can't get that to work, use sd-method:
download xperia078_2.zip from hardspl-thread, extract the ruu_signed.nbh, rename it to kovsimg.nbh and copy it to root of your sd-card. now enter bootloader and follow the instructions.
make sure that the file is named "kovsimg.nbh" only, not "kovsimg.nbh.nbh"!!!