does anybody know what is needed to flash an experia with spl version 0.72 or 0.78
this would help me millions as i have to do them all day long every friggin day
and they have to remain stock.
cheers for the help guys
Related
Is it possible to remove hardspl? and i would like to know also, what is the difference between these 2 hard spl tools?? Which is better? And which tool do u prefer for flashing a hardspl or operator unlocked trinity ??
BIG thanks for answers
Anybody??? Need an answer.
did you find the answer cause i have same question i been in the wiki and all over the forum cant find an answer...
http://trinityguides.info/index.php?option=com_content&task=category§ionid=3&id=33&Itemid=67
thanks for the link the thing is that the device is getting stuck in os boot screen there is no way to use sspl to ovewrite olihardspl 1.03
my problem is that after i hard spl 1.03 wen to upgrade radio rom and showed 100% all went well until it reboot and it was showing no gsm i been reading alot looked all over and its not just me other have the same problem form what i could gather the solution is get rid of olihardpls 1.03 downgrade to 1.02 or to des and flash a radio rom reinstall olihardspl 1.03 and the rom of choice but the problem is how to get rid of oli hardspl 1.03 .......
ps forgot to say the thing everytime i flashed radio rom different versions they upload in the device 100 % no errors but when i reboot still no gsm i tried hard reset etc... but no luck i think the problem is the protection hardspl 1.03 got is blocking radio roms from installing.......
Hi everybody,
i have a serious problem whith my diamond. In the past i have flashed some cooked roms in my diamond. But yesterday in order to have my warranty back i flashed an official rom 1.93 and i lock it with the original spl 1.93
.
So far good. But today i tried to flash an official rom 2.03 and it showed me this : Error [294] : Invalid Vender Id
I looked for answers at xda but they say that i have to use Hard Spl.
I dont want to use Hard spl because i will lose my warranty again so i cant use it.
What do i have to do to flash official rom 2.03????
Thanx in advance
Nothing get?? Someone to help?
is it a original HTC Diamond, or rebranded?
u may still need the Hard SPL for the 2.03 ROM, i'm not sure.
Ok guys... at the risk of sounding like a noob, I'm seeking some clarification on the Greenscreen issue in relation to my experience this morning...
New Oz Telstra Touch HD (SPL 1.15) received last night... downloaded latest EnergyROM this morning and used latest USPL (2.5) to flash ROM (via Windows Seven x64 with reverted drivers).
I wasn't expecting to see the greenscreen issue but alas it booted with ugly g/screen... I just turned off the screen and did a little research, got confused, turned screen back on and all was good (colour had returned to normal).
It appears that the colour is only screwed up during the boot cycle... once finished everything returns to normal.
So, what I'm asking is can someone advise me what I've done wrong and how I rectify the g/screen... I don't wish to use HSPL and I'd prefer to keep the original SPL if possible.
I couldn't find what ROM version the EnergyRom is - maybe that's where I've come unstuck??
Your help is always appreciated,
Cheers...
Well I gave up on using USPL and flashed the latest HSPL and all appears ok at this stage (at least no further g/screen).
Hope this helps another Telstra HD user...
I think it was because you went straight from 1.15 to a 1.54+ ROM, and because you used USPL it didn't update your SPL.
By using HSPL the SPL was obviously updated to a newer version, if you want to use USPL I advise updating to an official 1.54+ ROM and then flash to a custom ROM.
I'd say you're right... I wanted to use USPL primarily for warranty purposes but I'm not sure what the implications are for flashing a later official SPL with the Telstra THD anyway so I figured I'd just bite the bullet and use HSPL (and hope that if I need warranty I can still access the bootloader to revert to stock!!)
Any Oz Telstra users out there who know if using a stock SPL other than Telstra can void warranty?
Windza said:
I'd say you're right... I wanted to use USPL primarily for warranty purposes but I'm not sure what the implications are for flashing a later official SPL with the Telstra THD anyway so I figured I'd just bite the bullet and use HSPL (and hope that if I need warranty I can still access the bootloader to revert to stock!!)
Any Oz Telstra users out there who know if using a stock SPL other than Telstra can void warranty?
Click to expand...
Click to collapse
ive got a telstra HD, u cannot use the original SPL on new roms whether they are wm6.1 or wm6.5. this will give you the green screen issue and no reception (ie your radio is disabled)
flashing a newer SPL will void your warranty as there isnt one available from telstra. flashing HSPL will also void it. double edged sword really.
Crackwhores guide to flashing 1.56+ roms is a sticky at the top of this forum:
http://forum.xda-developers.com/showthread.php?t=505377
Any different SPL or ROM will be used as an excuse to void your warranty. If there was an issue I'm sure you could fight it in a court, but at the end of the day it would be many times cheaper to pay for repairs or get a new phone if they wouldn't fix it under warranty.
jasjamming said:
flashing a newer SPL will void your warranty as there isnt one available from telstra
Click to expand...
Click to collapse
Bugger... but you're 100% certain on this?
Hey im having trouble trying to flash my diamond with a Hard SPL.
Im currently using the original SPL 1.93 and cant flash it with any HardSPL in the diamond area, Mayb you guys can help me Thanks
Dont Worry I figured out that i needed to get 1.40 then flash to to any other version.
I can't seem to find which SPL comes with the tilt 2. I semi-bricked my phone and I need to flash the stock one back before going to ATT. Right now I flashed back the .87 SPL. Can anyone help?
It doesn't really matter. All Stock SPLs are the same as far as manufacturers are concerned, so long as it doesn't say OliNex I don't think anyone will check.
You could always flash the Shipped Exe from your supplier over the current .87 stock SPL.
Any more problems, please ask in the Hard SPL or ROM flashing thread.
Ta
Dave