Database Develop

New To the recent phone pocket pc's

hi..i have a tmobile mda with the rom 2.26.10.x that i didnt know couldnt be cid unlocked...i found out after i upgraded which sux balls.lolz..i have a few questions...
1.What is the best rom i can upgrade or downgrade without bricking my mda...
2.why is the mda wifi reception bad most of the time resulting on always 1 bar for wifis around me...i even tried the wireless b mod.
3.I know your phone isnt dead if bootloader works but do ihave to use an sd with the rom saved on it in order to reflash my mda again...or can i just use an app that installs it via usb while bootloader is on?? <this one im definitely confused on... Please anyone help asap, thanks so much and much blessing

Here's an answer to part of your problem:
As long as you have a USB connection, you can re-flash your phone (provided it's in either the bootloader or connected to your system via active sync 4.1 (I don't know about the beta 4.5 of active sync - which changed the way your PC connects to your phone as I understand it)). You may have to try several different ROMs to re-flash, but generally, I have found that doing the following almost always guarantee's a re-flash:
1) remove the SIM card
2) after every attempt, disconnect the phone from your USB port and then reconnect it
3) between attempts, remove the battery while you are setting up your system (you can't flash a phone w/ a dead battery, so unless you have a way to charge the battery other than the phone, you need to protect the amount of charge you have like it's your lifeline!)
4) I have had more success re-flashing a phone that is in bootloader mode by using the original ROM .exe file instead of trying to extract the files from it and THEN run the update utility.
5) If your phone came w/ a 2.x ROM, I wouldn't try to downgrade it to a 1.x ROM as this has never worked for me. Try flashing it w/ a 2.x or higher ROM only.
Hope this helps (oh, and rumor has it you should use the USB ports on the back of your PC, not the ones on the side or front!)
Black-Wolf

BIG Problem! "Black" display... what can I do?

Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!

mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((

What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone

you dont need to use activesync to flash
enter bootloader mode and you can connect via USB

Diamond issue

Heey guys,
A mate wanted me to flash his DIAMOND so i thought let's do that.
-downloaded Hard SPL, Radio and ROM.
Somewhere along the process something went wrong. I can get into the bootloader. can do factory reset (without any reslut).
I booted up and all I get is TOUCH DIAMOND screen.
Now I've searched the entire forum (also cheking out other options and phones issue's)
So the suggestion is to go back to stock. And the funny thing is they all need the Active Sync connection, I can't get there.
Please somebody help me out here

Put your fone in bootloader, then connect the usb cable to your pc, your pc will install a driver call htc usb sync, after that you should see the words usb at the bottom of the screen instead of serial, one it says that you can use a ruu to flash a rom of your choice

2# is definitely right ！Just do it and your issue will be solved ！

ok I'll try that.
Funny stuff. tried flashing it again all night without any succes RUU kept giving me errors.
Now this morning I'm at work and thought to give it just one more try.
It's flashing now.
ThnQ guys/gals

Hard SPL via MicroSD card

Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance

I don't believe it is possible unfortunately.
What issues are you having? Have you tried updating (or even downgrading them depending on what you currently have) the usb drivers?

The probleme that most of us flashing new cooked ROMs & my device get stucked several times. Likely it is connected via USB, Otherwise I can not do any thing.
Also due to several ROM flash times the USB connection in HD (or other devices) might broken.
This why we need a way to install USPL or HSPL via SD card.
Can some one help?
Regards

What I don't understand is how can a usb port become 'broken' due to flashing several custom build roms?
I too having a problem with the usb port on my blackstone. It can only be charged but not synchronized with pc anymore. I had HTC pick up my phone to have the mainboard replaced. Luckily the phone was still under warranty, so it won't cost me much.
Can someone explain?

i had similar probs ...
went to regedit , local maschine, software, microsoft,
windows ce services and changed to (1) the key : hasusbdevice
after this no problems anymore
it seems that a program installation changes this number from 1 to 0.
i have win 7 32

kersey said:
Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
Click to expand...
Click to collapse
This is not possible infortunately. However you do not need your device sync'ed with your pc to run HSPL. You only need to put device into bootloader and then connect it to pc. Bottom of bootloader should change from 'serial' to 'usb'. If not, you will need to update usb drivers. All this info can be found on this thread, no need for another
Thread closed

[Q] Sync over USB problem

Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.
Should I send my device for fix? I have warranty? I can reverse to original Stock and put back original boot loader.
Hopefully they will fix it but if they don't I cannot add custom ROM any more

You can go and get a card reader to have your sd mini read in the pc, I got mine with 5 EUR and it also supports several type of cards. Also keep in mind that read/write speed is faster with a card reader than plugging your device in Disk Drive mode and this can be convenient sometimes
Good luck with the repair. If you revert to stock SPL and to stock rom and if your time of warranty is not up then you should have no problems, although in my country the service center sucks, they try to make you pay as much as possible...

I manage to resolve this issue. I revers back to my stock ROM 6.1 and still I cannot sync. Then I put back radio 1.10.25.18 and it START TO WORK !!!! I can sync now without any problem and it works now with 6.5 ROM and different radio.
This was last step before I want to return it to SonyEricsson service.

Usb problem
Hello,
I'm having issue synchronizing my Xperia X1 with my PC using ActiveSync or WMDC.
Powering my battery works but sync doesn't. I tried 2 other USB cables and same problem occur.
I tried different PC but still I have same problem. I event went back to original Stock and this doesn't helps also.

usb probem
how to update the radio 1.10.25.85 on xperia x1 by the micro sd card? since the usb is not working? thanks!

same as you update your ROM, just rename radio file to KOVSIMG.nbh and update it. Hope this will work for you also.

yes I do this procedure [KOVSimg.nbh] but gets caught in tla loading. WHAT do I do now .thanks!

there is no difference in flashing ROM and Radio, can you maybe check that you do all proceudre correctly? maybe you should download Radio from some other place, maybe is broken

i have the same problem...the battery is recharging but it cannot sync...maybe it has something to do with the version of windows...i was using windows vista and windows mobile device center and it synced and all was ok...but now i have windows 7 ultimate x64 and even though i downloaded the mobile device center it does not recognise the phone when i plug it in activesync mode....it still works perfectly in USB drive mode....but i cannot flash a new rom through the usb method now...recently tried it on a friends pc with windows xp and activesync and worked just fine...any thoughts on that??..

ok. I tried everything. [xperia x1] is not reconhesido by [usb].
neither the radio rom can be clicked. [already downloaded several saiter]. it hangs in louding

I've the same problem occured before but I'm not sure if it's as simple as mine.
All I did was disable "Faster Transfer" under Active Sync radio Button in USB 2 PC (Control Panel), hope it's helpful.

Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?

life owner said:
Ok, I'd try this, but I have two questions:
1) can any body give the link to the old Radio rom?
2) I already have a 828x rom installed. is that compatible with the old rom?
Click to expand...
Click to collapse
hm, OT post
1) radio selection, don't forget to install a matching rilphone.dll
2) afaik those two (meaning radio rom and normal rom) are not related like that, radios should work in all versions on all roms
it might be, that you suffer less functionality/signal strength when using an older radio version, but that is regionally different and cannot be generalized
hope you find your ideal combo
Best, DK