Hi There,
Well my last TyTn II problem was solved, by a reboot. but sadly its doing other strange things.
Yesterday, as i was using it as i always do, the phone powered off just before i sent a text message. i turned it back on and everything seemed fine. A few hours later i went to use it and the touch screen was unresponsive. Turning the phone off, taking the battery out for a minute or two, and then turning it back on seemed to fix it. Ive also hard reset it and formatted the memory. The touch screen has been working on and off and now it has stopped responding again.
Also, something which has just started happening in the last hour. The Phone when i slide it, has a brief period where the phones screen turns off completely, no backlight or colour on the screen. This occours just after the screen slides past the spacebar and turns back on past the second line of letters (ASDF etc) on the keyboard the directional pad buttons stay lit the entire time.
Has anyone had similar problems? the phone is about 15 months old now, and i really dont want to have to send it to HTC or my mobile carrier.
And if it makes any difference, its the Stock 6.1 ROM from the HTC site for Optus Australia. Not unlocked or hacked in any way.
Thankyou very much for any help you can give me
ThePengwin said:
Hi There,
Well my last TyTn II problem was solved, by a reboot. but sadly its doing other strange things.
Click to expand...
Click to collapse
Have you tried a HARD RESET yet?
WillardZ said:
Have you tried a HARD RESET yet?
Click to expand...
Click to collapse
ThePengwin said:
Ive also hard reset it and formatted the memory.
Click to expand...
Click to collapse
Im sorry if i waffled on a little... but i said that.
Something strange that Ive noticed. the touch screen does work every now and again, until i slide it. Im not sure what triggers that, but it does it sometimes when i leave it be and come back to it, and others it doesn't.
ThePengwin said:
Im sorry if i waffled on a little... but i said that.
Something strange that Ive noticed. the touch screen does work every now and again, until i slide it. Im not sure what triggers that, but it does it sometimes when i leave it be and come back to it, and others it doesn't.
Click to expand...
Click to collapse
Oooops, missed that part in your original post.
Well the problem has seemed to get worse now, with the notification lights displaying incorrectly, and the center d-pad button not responding. So ive contacted my Service provider for a warranty repair
good thing i have extended warranty 15 months it has been, maybe its time for an upgrade...
It's probably the ribbon cable that connects the two halves of the phone -- either broken or unseated.
Related
i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
hollowground said:
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
Click to expand...
Click to collapse
you could try reflashing the original ROM
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
hollowground said:
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
Click to expand...
Click to collapse
If you're stuck at the calibration screen after a hard reset, how are you able to receive calls? Surely the reset hasn't completed?!?
Also, if you have reflashed to the original ROM, and thats now stuck also, then it has least got the correct ROM image on the device, thus allowing you to return it for a replacement.
Still a little confused about how you're able to use it at all though...
i honestly though it wierd myself. after flashing back to the original rom. at the calibration screen if i slide out the keyboard, press the talk button , close then reopen the keyboard, it lets me dial out using the number keys on the keyboard.
I can actually make out the home page behind the calibration screen as the screen reorientates itself.
edited Well I've no idea what just happened but the screen just stared working again out of the blue. My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
return it ..
kash04 said:
return it ..
Click to expand...
Click to collapse
I agree, sounds like a loose connection somewhere
Could be grit between the screen and frame
One of my friends had an XDA Orbit and he had this problem. It turned out it was a crumb or piece of grit wedged between the frame of the phone and the screen causing the screen to be permanently pressed at that point. He used some fine implement (maybe a pin - can't remember) to dig it out. If this was the problem with your phone that may explain why it suddenly started working viz the bit of grit became dislodged by itself.
Cheers,
Ashley
hollowground said:
i My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
Click to expand...
Click to collapse
Thats doggone lucky!! Just another reason to have a dog around...
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
eyetac said:
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
Click to expand...
Click to collapse
...sounds like a hardware issue!
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
eyetac said:
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
Click to expand...
Click to collapse
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
http://www.youtube.com/watch?v=5-IUzerAT0s
exactly what mine does
even right after a screen re-align
sigh
cyron_at said:
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
Click to expand...
Click to collapse
ok, thanks dude
will take it in and hopefully get a replacement
another example of what mine is doing pretty much to the T
http://www.youtube.com/watch?v=ZhQIyqnTkS4&feature=user
if anyone may have a solution.. please let me know asap.. as i will try taking it in on saturday
thanks guys
damn, mine does the same from time to time!
does anybody have a solution?
did a replacement fix the problem?
unfortunately i havnt had a chance to take it in yet, but i have logged the problem with my service provider..
the problem occurs alot more when i used panosha's rom/s
with the default (and now alphazero) the problem seems less frequent, but definitely still happens..
happened badly yesterday when i used gps to get my girlfriend to a casting, but switched on car A/C and after 5 minutes it was cool again *shrug*
its really annoying though
will let u know when i finally get to taking it in, unless u get there first
Hi there, I have the exactly problem what you had. Whenever the machine is hot, it becomes mad. Any solution could be reslove the problem?
It really sounds like a hardware issue... When you return the phone to the store please flash back to the original stock rom (for warranty purposes )
same problem
i am getting he same alignment problem.i do it many times a day but still tapping somewhere on screen taps the other way.very difficult to dial phone numbers
cyron_at said:
...sounds like a hardware issue!
Click to expand...
Click to collapse
i dont think its an hardware issue,as after i align it works fine for few hours and then i have to align again to make the taps work acurately.........i have heard there is a cab file for it.if any one can post it here.........................or make a cab file so that clicking it makes the alignment as it was default with the new phone
It is a hardware issue. the screen somehow (usually when carried in front pants pocket) will get pressed and SHIFTED. Then screen pushes against the side-cover and this fools the touch-sensitivity of the screen. Try yourself - try to shift screen to one or other side, and directly after it will be better. it's still a service matter though. Send it for repair.
This is a known issue. You need to exchange the unit for a new one.
hey guys...
so late last year i took the phone in and it spent 3 weeks at leaf (HTC distributer here is south africa)
i got the phone back, turned it on in the store.. and guess what... still screwed..
i threw my toys to say the least and got a brand new phone..
the new phone was 110% up until 2 weeks ago..
it started doing the same damn thing (to a lesser extent)
i have found that its a connection problem..
the touch pad is very all over the place if used normally (so basically its unusable)
but if i hold down the top left of the phone(pushing down just above the start menu) with my left hand and use my fingers on my right.. the phone works perfectly again..
does anyone know how to fix this?
its so frustrating, especially knowing im going to be without it for 3 weeks or more again
hmmm ...
i heard that the radio-part is for managing the curcuits.
try an other rom.
but i cant give garanty, i hard it only.
Since a week or so I've had some minor problems with my Diamond.
First after a couple of hours with no use, I saw the led blinking (hey, a new text messag, let's have a look) and the phone wouldn't wake up.
Even pressing the power button for a long time didn't make a difference, I resorted to taking out the battery and restarting it that way.
Everything was back to normal after turning it back on so I didn't really worry about it.
Until this weekend, I tried to wake it up from standby and the screen looked euhm... rather strange
I made a picture of it (please have a look at the attachment). In this state it didn't respond to any button, not even a long press of the power button.
While I was putting back my camera this screen disappeared and the normal touchflo was back, but still the device didn't respond to anything.
So again I resorted to removing the battery and everything has been fine eversince...
But now I'm a bit worried... Anyone have any idea what might be causing this? I must say it's been quite warm in my house the last week (about 27C) so I can imagine that temperature could have an effect...
Thanks for any suggestions.
Oh, I almost forgot..
It's a stock Dutch Diamond.
The latest ROM (2.03.404.3 NLD)
Radio 2.09.25.23
Protocol 52.51.25.26H
That's a cool screen saver!
defaria said:
That's a cool screen saver!
Click to expand...
Click to collapse
It sure is
My first thought was: Oeh! Capture it!!
But I couldn't start the screencap program because well... the screen didn't really work
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
I'm curious about the reason, any ideas?
JavierV said:
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
Click to expand...
Click to collapse
Has your Diamond been functioning normally after that? Or has it developed more problems (and has perhaps been repaired)?
I'm a bit worried that this is the beginning of major problems...