Touchscreen stopped responding Help.. - Tilt, TyTN II, MDA Vario III General

The touchscreen of my Tytn 2 OEm ROM R 1.27.15.32 G 22.51.88.13H and D 1.81.00.00 stopped working and i don't know what to do..i did a search on this forum but with not much joy...can the gurus help me so that my touchscreen starts responding....
thanks in advance..

tytn64 said:
The touchscreen of my Tytn 2 OEm ROM R 1.27.25.32 G 22.51.88.13H and D 1.81.00.00 stopped working and i don't know what to do..i did a search on this forum but with not much joy...can the gurus help me so that my touchscreen starts responding....
thanks in advance..
Click to expand...
Click to collapse
If a soft reset (stylus in the reset hole or just a power cycle) didn't fix it, do a hard reset.

i did hard reset and now the phone boots up uptp the "windows mobile" screen and stays there...what would be next option?

tytn64 said:
i did hard reset and now the phone boots up uptp the "windows mobile" screen and stays there...what would be next option?
Click to expand...
Click to collapse
Repeat the hard reset with the softkeys and stylus.

i tried to hard reset again but now i cant beacuse the left softkey is locked, and cannot be unlocked..howver the activesync is still working..is there any way to hardreset using the PC/.. i wont mind flashing the ROM fresh if there is a step by step procedure for that...

tytn64 said:
i tried to hard reset again but now i cant beacuse the left softkey is locked, and cannot be unlocked..howver the activesync is still working..is there any way to hardreset using the PC/.. i wont mind flashing the ROM fresh if there is a step by step procedure for that...
Click to expand...
Click to collapse
Hi, read this post. It worked for me. Don't forget to backup first so you can restore once your original rom is back on the device.

Problem solved..HTC is great....i did hard reset again and used sprite backup to restore...
the trick is to be very careful when pressing softkeys..they are so small that one can be pressing the red or green buttons..and stylus should be used for very short time (almost as if to touch and retrieve)..anyway all is well that ends well . Thanks gurus and this great site...long live HTC.

Related

Wizard flashed and now dead?

I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.
looks like a brick to me..
So sorry m8.
I hope you can revive it !
Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.
Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe
Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls
Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !
"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !
The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).
I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.

imate pda2k

hi all
i upgrade my pocket pc imate pda2k se2003 to windows mobile 6 professional with (HELMI_BA_WM6_R0_Public Pass newdevicesuck) its working fine but after one day my pocket pc got error (wrong password) i enter correct password many times but it say worng password i soft rest my ppc after soft reset my ppc can't start. reset my ppc many time but problem is still i connect my ppc with desktop pc to syncronise (microsoft active sync) but dont detect my ppc . plz help me what can i do?
plzz
AddAn
There is a bug in WM6...when the main battery is drained or removed you cannot use your password. In this case there is no other option...you have to make Hard Reset!
thx for ur reply.i reset the PPC On/Off button + Reset button.but problem is still it requests passward.How to make Hard Reset and further help.plz reply
If this is true I'm sure you do not perform Hard Reset correctly. If this is new ROM you should go to Boot Loader first.
Tip:How to:
1.Perform Soft Reset
2.Push Record and Camera button at the same time and hold them until the Boot Loader screen shows up.
P.S. You should do step 2. before the Radio version/ROM version appear in the right bottom of the screen.
3.“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES
P.S. Use the Record and Camera buttons for navigation.
4.Press Mail button.(Do not touch anything until the white screen disappears)
NOTE: IF YOU WANT TO GET RID OT THE PASSWORD(WITHOUT DELETING YOUR FILES) YOU SHOULD PERFORM NO/YES/NO PROCEDURE!
That's it! Good Luck!
thx.soft reset done.thx alot for ur suggestion.PPC working properly.if there is any other Bugs n other issues that r ristricted in this version plz send me detail.if u dnt mind.once again thx
my camera and recorder button works before booting and after that it does not move the option in the boot menu...............will some one please help me
i had got imate pda2k could u please tell the place form were i get steps to inatall wm6
welcome to the forum!
short question - short answer:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
step by step instructions, don't skip anything, if there is something you don't understand, come back to this post and ask for it.

help!phone freezes on 3rd splash screen!!!

can sum1 help me please..my wizard just freezed on the 3rd splash screen after a soft reset ..i dont want to do a hard reset just to make it workin again coz ol my files are in der..is there any way to make it work again without me having to hard reset the device????pleazzeee....help!!!!!
prettieh_meeh said:
can sum1 help me please..my wizard just freezed on the 3rd splash screen after a soft reset ..i dont want to do a hard reset just to make it workin again coz ol my files are in der..is there any way to make it work again without me having to hard reset the device????pleazzeee....help!!!!!
Click to expand...
Click to collapse
The extended rom of your phone seems to have gotten corrupted by too many installing/deleting applications or some or any essential OS files corrupt and not responding.You can try by switching OFF the phone and taking out the battery for a couple of minutes say 30 mins and then try again to switch ON the phone or try Soft reset,see if it works,otherwise try a Hard Reset.Hope it'll work,well if it still doesn't work,than the only way out is to reflash a new Rom.
Cheers !
actually i did sumthin..den it hard resets..nd then wen my phone is now workin..it can't recognize the storage card..so i have to hard reset again..i should've waited 4 d reply ..nwy, wat's the best rom out there?can u suggest sumthing?coz im currently on bd3.1..nd its not workin for me...it's always doin dat..tnx!!!
prettieh_meeh said:
actually i did sumthin..den it hard resets..nd then wen my phone is now workin..it can't recognize the storage card..so i have to hard reset again..i should've waited 4 d reply ..nwy, wat's the best rom out there?can u suggest sumthing?coz im currently on bd3.1..nd its not workin for me...it's always doin dat..tnx!!!
Click to expand...
Click to collapse
Which is the present Rom on it ? is your phone CID unlocked ? if its Cid unlocked then try new latest XMr5 or TNT 1933 series,both are excellent Roms.
Btw, which is your device G3 or G4 ? Post IPL/SPL...? of your phone,ok
Cheers!
IPL/SPL 3.08, OS 11.0.0.0, GSM 01.12.10..dis is the site i followed..http://forum.xda-developers.com/showthread.php?t=276963 ..im sori but im a noob..wat does r2sd all mean?i actually did dat..(i know, its not good to try things u dont know of..but ive learned my lesson..)where can i find the roms?can u pls tell me the thread?thanks for all ur help..
oh and btw, my phone is cid unlocked..nd currently on wm6..it actually destroyed my storage card..its not readable anymore..(no offense for d 1 who taught of it..)is der any way to revive it?

Help - Locked out of my Kaiser

Hi All
I'm a relatively new user here.
I've got a HTC Kaiser and just upgraded from Wm6 to 6.1 and tried restoring a backup done from wm6 using SPB Backup. It performed the restore and reset the device.
Now its stuck at the password screen and my password isn't working.
Is there anyway for me to boot up in Safe Mode and sort this out? Even if i have to restore factory settings or re-install the rom I dont mind, I just need to get into the device.
Please please please someone help me!
Thanks in advance.
u could try a hard reset.
If I'm correct, the hard reset is holding down the two soft keys?
I tried this and it doesnt even perform a hard reset. All it's doing is stuck on the password screen.
Is there another way to hard reset the device?
edit> Sorry I was being a total noob! Didnt know i needed to hold the soft reset as well as the soft keys. AFter a few good searches I found the answer here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Thanks guys you're stars!
QuiXilver said:
If I'm correct, the hard reset is holding down the two soft keys?
I tried this and it doesnt even perform a hard reset. All it's doing is stuck on the password screen.
Is there another way to hard reset the device?
Click to expand...
Click to collapse
hard reset is holding down the 2 soft keys while inserting ur stylus into the soft reset hole at the bottom of ur phone. read the kaiser wiki.

just got the xperia yesterday only 1 question

sory if this has been asked anywhere else i tried to find it alot but couldnt find the answer for it
a>after the hardspl can i go back and forth btween custom roms and origianal roms if i want to??
b>do i have to hard reset the device before flashing new rom?
c>do i ever have to hard spl the device again
thanks
a yes
b no
c no
jibran said:
sory if this has been asked anywhere else i tried to find it alot but couldnt find the answer for it
a>after the hardspl can i go back and forth btween custom roms and origianal roms if i want to??
b>do i have to hard reset the device before flashing new rom?
c>do i ever have to hard spl the device again
thanks
Click to expand...
Click to collapse
a> yes, you can flash any custom or stock rom after hardspl
b> no need to hard reset before flashing, it's more like hard reset after flashing, always
c>only if you want to send your unit back for warranty issues, that way SE won't know that you modded your device.
omg that was lightning quik thanks alot man cheers
one more thing man how can you hardreset your phone,go to system settings and press clear storage???because the power button and front button at the doesnt work for me. thanks
loving every second of xperia first day and already changed 3 roms lolz
jibran said:
one more thing man how can you hardreset your phone,go to system settings and press clear storage???because the power button and front button at the doesnt work for me. thanks
loving every second of xperia first day and already changed 3 roms lolz
Click to expand...
Click to collapse
reset it (either the hole inside the case) or turn of off then on again. then when it's starting (before the SE logo) hold BOTH silver buttons..
i love you man(in a non homo way) the button trick worked

Categories

Resources