Database Develop

Cannot Hard Reset please help

Hi all,
i have Flashed my XDAIIs from WM2003SE to the new himalaya rom version,
everything works fine ,but the only problem is i cannot hard reset , it
i have a problem with my buttons (Home,email, explorer, ok), they cannot be used since i purchased it, so in this case i cannot hard reset my device, as i have to press mail button to confirm the hard reset setting,
Please any one have any alternate solution of hard reset or to format the persistent memory let me know

Try a program like spb pocket plus. It can put a button on your today screen to do a hard-reset & soft-reset as well, in the system section .
It's available on trial, so go for it.
Cheers, M

hi again , i downloaded the sbp plus and installed the program,i can find the button for soft reset , but here is no button available for hard reset , could u please guide me

The hard-reset button must be added manually, no idea why ;-)
So go to: start -> settings -> today -> items
select 'sbp plus' and push the 'options...' buttons. Now you can add it to the today bar.
Succes, M

hi thanks for your co -operation , i tried to follow the procedure as you told , once after selecting the today--items--Pocket Plus--options , here comes a new screen titled "today Plug-in" i click on Add button, and a new "untitled" button is created on left hand side, than i click on items on the same screen ,i get list of category "indicator, programs, my documents,system,settings,custom" i tried to find the reset utlity all over the categories but i cannot ,
your comments are appreciated ,i have installed spb plus version 3.04 buid 4195

I have to install it first so give me a few hours for exact details

Hi Kevin,
I'm terribly sorry that I wasted your time; I must have been mistaken fot I can't find it back myself. I looked spb pocket plus, battery pack pro & some other tools but can't find it back for you.
Probably you need the e-mail button as well to put it into bootloader? Or is BA lacking such a mode? cause my magician is havin a hard-reset when coming out of bootloader.
Hope it helps.
Sorry, M

oh please. If you're in WM5, you can't hard reset just like this.
Put it into the mode which you can format storage....
do a search in the future.

Wizard flashed and now dead?

I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????

Do you have a copy of the Wizard Love rom? If so, install that in bootloader mode. Remember to plug your USB cable into the phone.
drivex said:
I dont know what to do... Yesterday i flashed my wizard to wm6 mb rom, everything worked great but today, couple hours ago i tried to upload some stuff by activesync, suddenly pda disconnected and hanged, so softreset and nothing - its stuck on bootscreen where there is info about my components:
ipl 2.26
spl 2.26
gms 02.61.11
os 3.3.0.0 (was something like 10.xxx... but i flashed faria 3.5aku and now is 3.3)
i also tried to format but msg FormatFailed appear :/
it is possible to run in bootloader and charger also charge my wizard
what to do ????
Click to expand...
Click to collapse

i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((

drivex said:
i am after updating and still wizard hangs up on boot screen. versions has changed and bootscreen logo too, what now ? ;((((
Click to expand...
Click to collapse
I would suggest flashing back to a carrier aku2.x rom and ensure that your phone will come up properly on it. If it does then good, it's most likely not a serious hardware issue, if not then you might be out of luck.

looks like a brick to me..
So sorry m8.
I hope you can revive it !

Had similar problem with the Super rom.What worked for me was taking a back up on the memory card and reflashing from the card.Read the Wiki about details on how to go about it.

Try to flash the latest t-mobile ROM found on their site if all the suggested doesnt work..

@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.

I've done. I used method with mtty and i copied os to sd card, after that i reflashed using minisd card and it works. Thx for everyting, u guyz do great job here hehe

Me too !
cyberdrakula said:
@ DRIVEX
Try Hard resetting via the harware Buttons Softreset hole method. Here is how:
----------------------------------
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Hope it helps.
.
Click to expand...
Click to collapse
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!

cachep2004 said:
I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...
Pls help me !!!
Click to expand...
Click to collapse
this is dead your flashrom chip in pda. repair only change semiductors or all board.

Pls show me another ways !
UfOuN said:
this is dead your flashrom chip in pda. repair only change semiductors or all board.
Click to expand...
Click to collapse
I'm living vietnam, so i'm trying to find out another ways, but i think they have no equipments.
Bless god for me.............pls

Revive Wizard
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.

Thanks alot !
sleurhut said:
you must use youre camera button on the startup if you got error 260.
You see a lot of collors on youre display and then you can flash youre phone again.
Click to expand...
Click to collapse
Thanks alot my friend, I will do it !

"FORMAT FAIL" again again pls ... help me !
( I've been trying many times, but when i did "While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key " but screen appeared FORMAT FAIL. Pls help me...)
Pls ! Help me...."FORMAT FAIL" again again pls ... help me !

The hard reset doesnt work
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.

ecomajor said:
I cant even get the screen to go on anymore. When I plug it in the light doesnt even go on to indicate that it is charging. SOmeone help me please.
Click to expand...
Click to collapse
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.

mfrazzz said:
Hard to help someone that hasn't told us anything.
From the sounds of it your battery has died. Until you get a good rom on there, the phone will NOT charge. You will need to find someone with a similar phone (or maybe go to your cell provider) and get them to charge the battery at this point. Once you have the battery charged then try following this step by step:
http://forum.xda-developers.com/showthread.php?t=298613
If that doesn't work, then come back and tell us more about what happened, what your IPL/SPL is, what type of phone you have, if its G3 or G4, etc... People here will help, but not without information.
Click to expand...
Click to collapse
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?

ecomajor said:
I have G3. i think its 2.25. I was trying to flash my rom when this all happened.
is there any way to charge it without a good rom?
Click to expand...
Click to collapse
Not that I know of. Thats one of the reasons its recommended you start with a battery that has over 50% charge (personally I never flash with less than 100% in case something goes wrong). Not saying you didn't do that, but you appear to now be trying to work with a dead (or almost dead) battery, and that will only make things worse if you try to flash and then the battery dies in the middle (maybe not worse, but it sure won't help).
Like I said, you'll need to find someone with a similar phone or see if your local cell provider office will let you charge it (or swap it for a charged battery).

I got my ppc back up and I tried reflashing again and I have almost the same issue. It says format is successfull but then it gets stuck at the blue screen.

Somebody help me!!! Upgarde

I've instaled a windows mobile 5 rom, a strange rom that put my Qtek 9090 very, very slow. Unappy whith that, i made a search here in XDA-Developers and my conclusion was that the best Rom is the "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek".
So i download it and started the upgrading pressing "MaUpgradeUt_noID" icon that opens a sreen with Qtek S100. clicked Next and after the next sreen an error ocured » ERROR 101: Conection Error«
My phone is correctly conected and i don't know what to do.
Sugestions???

Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset

xplode said:
Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset
Click to expand...
Click to collapse
And remove memory card

Contacts???
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.

please post in the specific rom thread

Thank you all for the help, but i figure it out what is happening.
I was no doing the setoperator thing. When i do that the rom was detected.

same
nunocapela said:
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.
Click to expand...
Click to collapse
I have the same trouble anyone know why and how to fix it?

Hard resetting ... from the from a factory ROM

If something happens to your rom where you can't boot up completely and you're on the factory ROM...do this:
To perform a hard reset
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the middle left side of your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
“This operation will delete all your personal data, and reset all settings to manufacturer default.
Press Send to restore manufacturer default, or press other keys to cancel.”
3. Release the two SOFT KEYs, and then press the button on your device. Warning! Your device will be set back to factory default settings.
This was provided to me from a reliable source.
I don't have a Wing so I can't answer questions on this.
This came my way beacause my cousin overclocked his Wing too much and it would not boot.
The T-Mo ROM is not available for download to re-install it.
Because of where he works, he was able to come across this info.
I just shared it with you.

Thx for the info, but the manual states this as well

xsign said:
Thx for the info, but the manual states this as well
Click to expand...
Click to collapse
Don't own or have the device, just shared what was told to me as a fix for my cousin.

Thanks - but i worte in another thread that i really hope for one thing:
Pleas - to all noobs - don´t flash ROMs or change poolsize - when you don´t know how to make a hardreset or to start your device in bootloader.
Please read, read, read - and then beginn playing when you know what you are doing.
Thanks

Major Help PLease!!

Hi, Am New Here
I just wanna ask something about my O2 xda IIs, i had found out recently that my phone became soo slow.. even my SMS cant even appear.. soo i tried to let my brother fix it..
He tried to fix it with looking for softwares.. he was able to do soo what he call reformting my phone.. but in the end the Phone just stuck up in the Windows Logo.. please help me abou this problem..
My phone Specs
HTC O2 xda IIs
R 1.02.00
G 1337.32
D (i dont know what the version)
Phone Specs After my bro cooked it..
R 1.02.00
G 1337.32
D 5M6.5.1
Can you give me details about installing, upgrading
i think my bro can fix this.. can please give me the details? and softwares needed for my phone to able to operate again
THNX

welcome to the forum!
what your brother did was, flashing another rom. d-two's wm6.5.1 actually.
the fact that the device is stuck in the boot logo now can mean 2 different things, one is good and one is rather bad:
the good one is: he forgot to hard reset the device.
to perform a hard reset please go to -=this site=- and have a look how it's done. after flashing a device, a hard reset is necessary to clean up all the old crap, that is left from the rom before, like the registry and the contents of the storage drive.
the bad on would be: he screwed something up during the flashing
if the first method didn't get you anywhere and you are still stuck in that splash screen, you should look for "stuck in splash screen" or "stuck in bootloader" or "format blueangel mtty"
what that means is: the rom did not flash correctly and with a device with a broken rom, you don't want to start flashing again. so you need mtty to format the device before it should be flashed again.
my personal guess would be no. 1
with best regards
Chef_Tony

Dear Chef_Tony
Thanks for the quick reply.. your correct that the 1st one is only the problem that am not stuck at the bootloader but still... Even though am still stuck at the screen logo after try other roms... can you give me good ROMs that i could use?
I get the ROMs on this thread
http://forum.xda-developers.com/showthread.php?t=428030
i tried those ROMs but still no good i followed the instruction very well.. But still no progress can you still help me ??
By the way whats "mtty" can i use the second method that you give me can you tell me the instruction that i should follow
thnkx and more Power!!

i would, of course, recommed d-two's wm6.5.1 build 23071, which will be released tonight.
if the problem persists with other roms, you are stuck in splash screen and you need to take the mtty method. that is a little complicated, and i have never done it before, therefore, i cannot take responsibility, i just looked for what worked for other people (which is what i meant by search for those terms, it would have lead you to the solution, but here you have your own copy of the solution)
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.