I've instaled a windows mobile 5 rom, a strange rom that put my Qtek 9090 very, very slow. Unappy whith that, i made a search here in XDA-Developers and my conclusion was that the best Rom is the "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek".
So i download it and started the upgrading pressing "MaUpgradeUt_noID" icon that opens a sreen with Qtek S100. clicked Next and after the next sreen an error ocured » ERROR 101: Conection Error«
My phone is correctly conected and i don't know what to do.
Sugestions???
Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset
xplode said:
Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset
Click to expand...
Click to collapse
And remove memory card
Contacts???
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.
please post in the specific rom thread
Thank you all for the help, but i figure it out what is happening.
I was no doing the setoperator thing. When i do that the rom was detected.
same
nunocapela said:
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.
Click to expand...
Click to collapse
I have the same trouble anyone know why and how to fix it?
Related
Hello to all,
Can it someone explain to me in steps how I can install WM6 on my HTC3600?
Currently is on Germany language, but I would like to switch it on English.
Thanks a lot on your help.
Regards
1) decide which rom you want (I used LVSW)
2) go to the thread and read 1st post
3) grab the 3 files attached
4) they are zip's, extract each to thier OWN folder.
5) go to each folder IN TURN as listed in the thread and run ROMUtilityUpgrade that is enclosed IN EACH folder.
STOP between each folder / Upload to phone and check your phone
THE VERY first one HardSPL MAY give an error, HOWEVER just run it again, seems ActivSync throw a fit and then the computer has to re-connect, HOWEVER after that off you go.
ALSO use NON-Vista machine
deech said:
1) decide which rom you want (I used LVSW)
2) go to the thread and read 1st post
3) grab the 3 files attached
4) they are zip's, extract each to thier OWN folder.
5) go to each folder IN TURN as listed in the thread and run ROMUtilityUpgrade that is enclosed IN EACH folder.
STOP between each folder / Upload to phone and check your phone
THE VERY first one HardSPL MAY give an error, HOWEVER just run it again, seems ActivSync throw a fit and then the computer has to re-connect, HOWEVER after that off you go.
ALSO use NON-Vista machine
Click to expand...
Click to collapse
HUH...YOU ARE REALLY FAST..THX...
SO...
1. what is LVSW? I will use same like you
2. i just need to connect my HTC with a PC and start applications from 1st thread? or before that I need to do something more?
go here http://forum.xda-developers.com/showthread.php?t=305250
grab the 3 downloads and put them safe
Extract each to it's own folder.
Do them in the order listed in the post ... HardSPL, Radio, WM6.
Enjoy
deech said:
go here http://forum.xda-developers.com/showthread.php?t=305250
grab the 3 downloads and put them safe
Extract each to it's own folder.
Do them in the order listed in the post ... HardSPL, Radio, WM6.
Enjoy
Click to expand...
Click to collapse
Really....THX!
It works man, thank you once more!!!!!
Can you give to me little help with a GPS tomtom 6....?
What I need to download and install?
No worries
What exactly do you want to know about tom tom?
First off I'll assume you are buying the software. In which case you want this
http://www.tomtom.com/products/product.php?ID=281&Category=2&Lid=1
now you dont have to buy it from them direct, however that is the product you want (it may be cheaoer elsewhere)
If it's already on a memory card.... just pop the card in the slot and it'll do everything for you.
I would HIGHLY recommend making a copy of the card contents to your computer, just use activ synch and explre the device till you get to the storage card then copy and paste the entire contents of the card to somewhere safe.......
Then EITHER push this up to a larger card or carry on with the card you buy.
Install Tom Tom home on your computer, it will then synchronise your maps and voices and stuff BUT more importantly it'll auto update your software for you.
You need to be running 6.03
in this version tom tom can be set to use "built in gps receiver" after that away you go... simple and Deech proof
edit for spelling mistakes
lol.. you are really fast....
can it be anything without buying orginal software or maps ?
It can and if you know where to look I am sure you will find what you seek young Jedi
I arent going to preach but note I did buy this software mainly for updates and technical back up
If you "acquire" the software read any threads / forums from the place where you get it from
Fast cos laid on the couch nursing a size 10 thick head after last night
ihihihihihi...
okay..... i will search... my the force be with me
Again problem,
Im facing with extremly battery drain, after charging standby was just 36 hours, before was around 5-7 days i think.
Is there any solution for this??
Thank you... Mr.Vader
An my young jedi, yes there is....... and if I can get it to work it should be attached to this post.... Also read the MuN RUS Rom thread it has been flagged-up thier with alsorts of solutions including this .cab
Drop it onto your memory card and ermmm run it
I get an corrupted image error when I try and flash the hard-spl?
Anyone know how I can get around this? tried searching for info and the search function just brang up unrelated posts, and theres nothing on the wiki despite it being a common problem.
So please forgive my stupidity, and enlighten me on how to solve this?
I have an M700 with shipped rom installed
Thanks in advance,
WWWeed
after i upgrade to wm6, how hard is it if i want to go back to wm5, how hard is it to downgrade? Do I have to back anything up?
back up contacts etc
back up ringtones etc
grab a rom with WM5 in / on it, and re-re-flash the phone, leave the radio rom as it was mind as it's seperate from the WM section
deech said:
An my young jedi, yes there is....... and if I can get it to work it should be attached to this post.... Also read the MuN RUS Rom thread it has been flagged-up thier with alsorts of solutions including this .cab
Drop it onto your memory card and ermmm run it
Click to expand...
Click to collapse
Ahhh great thanks.
Just what I was after.
As you are using the LVSW like myself you may have an answer to my other question.
Is there a .cab file to fix the awefull sound on WM6 and the trinity?
Media player is so quiet, if I can't fix it, I'm going back a stage to WM5 as I use the MP3 player side of it allot.
Many thanks.
Shaun.
Hi,
i have just loaded wm6 following the instructions here and now i am getting USB device is not recognized.
Can anyone suggest a solution?
Thanks
Stephen
are there any issues not completely solved on the available non-official WM6 ROMs for Trinity?
I'd like to upgrade mine, but only if all the initial problems have already been solved.
BTW, my Trinity came with TomTom 6 pre-installed. If I upgrade to WM6, will I have to purchase and install a new copy of the software?
All seems to work fine now, any issues then there will be a .cab file around here somewhere, main ones are ATIfix, when does somthing to make tomtom work nicely, power fix which address' some power useage issues.
The tomtom that come with the handset is a crippled try before you buy version (well it is here in the UK ) So ermmm yes, you would need to buy a full version, but on the plus side it's yours forever and no matter what you do to your phone you can always put it back Unless the tom tom is on your SD card in which case REMOVE the card before you start and re-install when you've finished rom-ing
Failed with upgrade to wm6
Hi all
I just got mine 3600 and tried to upgrade to wm6 with the 3 files. When I run the first hard-spl program I had problems with the connection with the usb cable. The program aborted after a second or so. Now I am stucked with this colured image with the text
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
is there any way for me to correct this. Or do I have to send the phone for repair?
Grateful for all help
/adam
Active sync doesn't get a connection to the 3600 anymore....
Read the second post in this thread, on page one, in the instructions I wrote it tells you THIS IS NORMAL, dont worry about activesync, when doing hard SPL the first time it regularly disconects and hangs the phone with the tri-colour screen, soft reset the phone and re-start the procees (ie run the first file again). That should see you right
Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files
Hi, Am New Here
I just wanna ask something about my O2 xda IIs, i had found out recently that my phone became soo slow.. even my SMS cant even appear.. soo i tried to let my brother fix it..
He tried to fix it with looking for softwares.. he was able to do soo what he call reformting my phone.. but in the end the Phone just stuck up in the Windows Logo.. please help me abou this problem..
My phone Specs
HTC O2 xda IIs
R 1.02.00
G 1337.32
D (i dont know what the version)
Phone Specs After my bro cooked it..
R 1.02.00
G 1337.32
D 5M6.5.1
Can you give me details about installing, upgrading
i think my bro can fix this.. can please give me the details? and softwares needed for my phone to able to operate again
THNX
welcome to the forum!
what your brother did was, flashing another rom. d-two's wm6.5.1 actually.
the fact that the device is stuck in the boot logo now can mean 2 different things, one is good and one is rather bad:
the good one is: he forgot to hard reset the device.
to perform a hard reset please go to -=this site=- and have a look how it's done. after flashing a device, a hard reset is necessary to clean up all the old crap, that is left from the rom before, like the registry and the contents of the storage drive.
the bad on would be: he screwed something up during the flashing
if the first method didn't get you anywhere and you are still stuck in that splash screen, you should look for "stuck in splash screen" or "stuck in bootloader" or "format blueangel mtty"
what that means is: the rom did not flash correctly and with a device with a broken rom, you don't want to start flashing again. so you need mtty to format the device before it should be flashed again.
my personal guess would be no. 1
with best regards
Chef_Tony
Dear Chef_Tony
Thanks for the quick reply.. your correct that the 1st one is only the problem that am not stuck at the bootloader but still... Even though am still stuck at the screen logo after try other roms... can you give me good ROMs that i could use?
I get the ROMs on this thread
http://forum.xda-developers.com/showthread.php?t=428030
i tried those ROMs but still no good i followed the instruction very well.. But still no progress can you still help me ??
By the way whats "mtty" can i use the second method that you give me can you tell me the instruction that i should follow
thnkx and more Power!!
i would, of course, recommed d-two's wm6.5.1 build 23071, which will be released tonight.
if the problem persists with other roms, you are stuck in splash screen and you need to take the mtty method. that is a little complicated, and i have never done it before, therefore, i cannot take responsibility, i just looked for what worked for other people (which is what i meant by search for those terms, it would have lead you to the solution, but here you have your own copy of the solution)
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
I need help upgrading my XDA IIs from wm5 to wm6. pls help. have tried the steps show in some forums but having trouble with the BaUpgradeUt.
have heard that i could install using the SD. which is much easier.. kindly show me the link to this steps pls.
thanks
sd card flashing does not work for the blueangel. please follow the steps in my tutorial thread linked in my signature. and don't use the baupgrade, but my Chef_Tony RUU's maupgradeut_noid. that should do the trick
im using win 7 and i cant connect to the BA when its in the bootloadermode (is shows usb) but i cant connect using my windows mobile device center (Activesync for win7)
as a beginner, you shouldn't attempt to flash using a windows vista/7 computer, because it is much more complicated than the regular process and takes a lot of extra knowledge.
if you see absolutely no way, that you can access a windows xp pc, you can try the methods described in this post: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
thanks for the help. now im facing a new problem regarding to some errors i encountered in this version.
cant use my sim contacts and i cant even add a new contact to the directory?
issues like that usually appear, when the user forgot to perform a proper hard reset.
hmmm? so what can i do??
perform a proper hard reset by pressing power+reset, then camera+record and in the menu that appears, change the options to read:
ernable kitl NO
clear registry hive YES
format storage yes and confirm with the mail button. then the device will start the first boot, where you set the clock and stuff like that. this step is mandatory to each upgrade process and is therefore mentioned in all the tutorials
Hello, i have searched on xda-developers how to use Task 29 tool, and it's not explained very well, so i am going to explain you how to use it... I would like to thank to agent_47 for his explanation, and link.
We use Task 29 to format phone memory. When we install a lot of ROMs, sometimes new ROM just overwrite old ROM files, not delete them. That cause new ROM to unstability.
(IMPORTANT) Using Task 29, phone memory will be deleted, but it won't delete you SPL and Radio
1. Connect your XPeria X1 to PC in Disk Drive mode.
2. Transfer the custom ROM you want to install on ROOT of memory card and make sure that it's named "kovsimg.nbh"
3. Disconnect phone from USB.
4. (IMPORTANT) DO NOT TURN OFF DEVICE, JUST REMOVE MEMORY CARD!
5. Download the Task 29
(Click here to download Task 29)
6. Extract it to Desktop
7. Connect phone in ActiveSync mode. (wait until installs drivers itself)
8. Now open "task29" folder, and there is 9 items.
9. Run ROMUpdateUtility (Vista/7 Users - right click>Run as Administrator)
10. Follow on screen instructions, and it will start to clean storage. (It says that this process takes up to ten minutes, but it only takes 2,3 minutes top)
11. When the bar comes to 100%, press finish.
12. (IMPORTANT) THE PHONE WILL REBOOT ITSELF AND IT WILL STUCK ON SONY ERICSSON LOGO! But that's okay, because there is no ROM to run, we just cleaned the phone storage.
13. Remove battery and insert memory card. (We put custom ROM on memory card in step 2)
14. Put battery and cover on, and press the volume button down, and power button, and HOLD BOTH BUTTONS UNTIL 3-colored screen shows.
15. That's it, now follow on-screen instructions to install custom ROM, and when done, i strongly reccomend to HARD RESET PHONE.
Hard Reset - Press two buttons below screen (left and right) and hold it, and press the power button UNTIL VIBRATE, then release the power button, BUT STILL HOLD TWO BUTTONS BELLOW THE SCREEN (IMPORTANT)
That's it, i have done it for the first time, and i was looking for explanation like this ( I do not want to brag myself ) So i hope i made you easy this process, and belive me, my phone it really works faster after Task 29.
Also, take a look at my other thread "Installing new custom ROM using phone" in which is explained how to install a custom ROM also step-by-step.
That's a great guide to flashing ROMs! Very straightforward and clear.
Wish it existed when I was flashing a custom ROM for the first time.
It would be nice to have it stickied as it's really very helpfull and informative.
Haplok said:
That's a great guide to flashing ROMs! Very straightforward and clear.
Wish it existed when I was flashing a custom ROM for the first time.
It would be nice to have it stickied as it's really very helpfull and informative.
Click to expand...
Click to collapse
Thank you.
I also flashed first ROM with suffer, because there isn't guides like this one, so i created one
i like your tuturial, too!
good work bro!
freak4all said:
i like your tuturial, too!
good work bro!
Click to expand...
Click to collapse
Thank you very much
Great turtorial!!
Very straightfoward and easy to understand in the steps provided.
This should definately be stickied for novice flashers.
nycdemons said:
Great turtorial!!
Very straightfoward and easy to understand in the steps provided.
This should definately be stickied for novice flashers.
Click to expand...
Click to collapse
Thank you very much
Also, check out new thread "Installing new custom ROM using phone"
milancex said:
Thank you very much
Also, check out new thread "Installing new custom ROM using phone"
Click to expand...
Click to collapse
nice! perhaps you may want to compile that thread into this one though and label it, Tutorial: using task 29 to clear phone memory and install custom. that way, people wont have to check 2 threads
nycdemons said:
nice! perhaps you may want to compile that thread into this one though and label it, Tutorial: using task 29 to clear phone memory and install custom. that way, people wont have to check 2 threads
Click to expand...
Click to collapse
Thanks again! Well, i think it's better this way, there are many steps in this thread, and in the other one, so might be confusing but thank you for interesting but i will put link into this thread for "Installing new custom ROM using phone"
Hi,
nice one. Could have been added to the original thread but maybe it's easier to find like this.
I won't sticky it, as we want to keep as little stickies as possible to keep the forum "tidy", but I will add this to the reference thread.
I also updated the title.
Thx and best, DK
hard reset
to hard reset, the easiest way is to dial *74*# and call button, then it will be asked whether to soft reset or hard reset?... hope it was informative...
susheelnamdeo said:
to hard reset, the easiest way is to dial *74*# and call button, then it will be asked whether to soft reset or hard reset?... hope it was informative...
Click to expand...
Click to collapse
Well, we need to reset phone BEFORE FIRST RUN
I don't think that's actually necessary. But you would be wasting a lot of time to configure the system if you activated the phone before the hard reset (because then you have to configure it again anyways).
Haplok said:
I don't think that's actually necessary. But you would be wasting a lot of time to configure the system if you activated the phone before the hard reset (because then you have to configure it again anyways).
Click to expand...
Click to collapse
Yeah, and hard reset BEFORE first run is strongly reccomended!
Help. I have tried to run task29 but every time the phone gets into bootloader mode I get connection error [260]. My computer then says "USB device not recognized". My HardSPL version is Olinex-0.72. I am using Energy Rom.
naklar said:
Help. I have tried to run task29 but every time the phone gets into bootloader mode I get connection error [260]. My computer then says "USB device not recognized". My HardSPL version is Olinex-0.72. I am using Energy Rom.
Click to expand...
Click to collapse
That happend to me first time also, your driver for ActiveSync (for Vista/7 "Windows Mobile Device Center") are not installed...
If you are Windows XP user download ActiveSync (link below)
ActiveSync
It won't ask for validation, you can download it...
If you are Windows Vista/7 user download Windows Mobile Device Center (link below)
Windows Mobile Device Center
(This link for Windows Mobile Device Center is on Microsoft site, and YOU NEED TO HAVE ORIGINAL WINDOWS INSTALLED, IT WILL ASK YOU FOR VALIDATION KEY! IF YOU DO NOT HAVE ORIGINAL WINDOWS... google for "Windows Mobile Device Center" )
Let us know what have you done...
Greetings
milancex said:
That happend to me first time also, your driver for ActiveSync (for Vista/7 "Windows Mobile Device Center") are not installed...
If you are Windows XP user download ActiveSync (link below)
ActiveSync
It won't ask for validation, you can download it...
If you are Windows Vista/7 user download Windows Mobile Device Center (link below)
Windows Mobile Device Center
(This link for Windows Mobile Device Center is on Microsoft site, and YOU NEED TO HAVE ORIGINAL WINDOWS INSTALLED, IT WILL ASK YOU FOR VALIDATION KEY! IF YOU DO NOT HAVE ORIGINAL WINDOWS... google for "Windows Mobile Device Center" )
Let us know what have you done...
Greetings
Click to expand...
Click to collapse
Thanks for your help milancex. I am running Windows 7 (genuine) and I have reinstalled WMDC. My Xperia is still not recognized in bootloader mode.
I reran the X1_HardSPL.exe and it was able to connect (it probably loads bootloader drivers). It seems that HardSPL uninstalls the bootloader drivers when it finishes running
A check of the properties of the Unknown Device under Device Manager when I connect my X1 in bootloader mode says that windows stopped the device because there was a problem with it.
Any other ideas?
Greetings
naklar said:
Thanks for your help milancex. I am running Windows 7 (genuine) and I have reinstalled WMDC. My Xperia is still not recognized in bootloader mode.
I reran the X1_HardSPL.exe and it was able to connect (it probably loads bootloader drivers). It seems that HardSPL uninstalls the bootloader drivers when it finishes running
A check of the properties of the Unknown Device under Device Manager when I connect my X1 in bootloader mode says that windows stopped the device because there was a problem with it.
Any other ideas?
Greetings
Click to expand...
Click to collapse
first, why did u run x1_hardspl? don't u have hardspl installed?
Nice TUT, thanks...
Oz
ozzybulldog said:
Nice TUT, thanks...
Oz
Click to expand...
Click to collapse
you're welcome