Hi there,
Ever since i used the X1 it's very slow.
Little while ago i upgraded to WindowsMobile 6.5 (this one: http://forum.xda-developers.com/showthread.php?t=542664&highlight=christian) i hoped it would help but it doesn't.
The problem is: I always miss calls.
I am not able to change the ringtime from 20 sec to 30 sec.
It says "please disable your data connection or try again later".
Data connection is off when I try this.
This isn't a very big deal if the phone rings immediately when I receive a call, witch it doesn't.
It takes 9 sec. for my phone to "wake up" and ring, so by the time i notice it, the caller is almost forwarded to my voicemail.
Is there anyway to fix this?
I've tried everything in this topic http://forum.xda-developers.com/showthread.php?t=459328 but it doesn't help.
Please help!
Related
Hi All,
Something weird happened yesterday, my tytn II stopped working normaly.
I cannot make calls anymore and people calling me get my voicemail, although it shows full reception (t-mobile). The only call works, is calling my voicemail. I didnt change anything in the phone prior to this problem.
Also the battery is dropping down very fast. Like 50% in 5 hours without using anything...
I putted my sim in another phone, it works fine, so the problem lies within the phone. I hardresetted the phone but the problem remains...
Anybody had the same problems and/or knows how to fix this???
I have an original HTC tytn II on tmobile network.
THanks!!
Jelle
found comparing problem here, probably same problem:
http://forum.xda-developers.com/showthread.php?t=335074
Any help is welcome, also for the other users with the same problem!
Thanks!
same problem
Hi,
I also have the same problem you write about. It also happened for no apparant reason. I notice that I can make calls to other mobiles that are close to my phone in proximity... odd?!
I've sent an email to HTC ... waiting on a response.
I have started getting the same sort of problem. When I try and make calls - it just won't connect. Sometimes a soft reset works - but not always. People cannot call me and I get messages about missed calls and voicemail messages.
It's starting to make my Orange TyTnII virtually unusable.
Suggestions?
ok i have a slueth rom http://forum.xda-developers.com/showthread.php?t=366284&highlight=slueth and have been running it since 6/08 and had no major problems. so in the last few days when i have tried to make a call it will just act like it is going to call and then it will say "call ending". when i reset the phone(shut off) it will make a call but after that it stops making calls, it will try to call and it seems like it is looking for service. it can have full signal and still nothing, i can't receive calls either.
oh wow this is exactly what has been happening to me! What service/region are you?
Does it happen with texts as well?
yes it does i dont get text, im from fl i just drove up to boston mass on sunday. i have att wireless.
I am from northern VA and here is my problem more in depth, hopefully we are having somethign similar so this thread can serve a purpose to us both:
Note: this started when I first flashed Hyperdragon3 (with m2d) and persisted with L26 Kaisertouch (flashed because I thought it was a problem with ROM compatibility.
From time to time, the tilt decides to, from what I've acquired, not make a proper connection to the network. Although it displays 2 bars or 4 bars whatever, it is unable to make calls, receive texts, or connect to 3g/edge. The calls turn out like so, I call, the phone says "dialing" for about 6-7 seconds and then makes the ubiquitous sound of a call ending the beeping noises.
Regarding texts, when this problem surfaces I can't send any texts "Your message cannot be sent" and cannot receive any either (usually receive them all at once a little later).
Soft-resets used to fix this problem but they don't anymore.
So far I have restored my tilt to factory rom/spl/radio and still the exact same problem is there...
This leads me to believe that it may be a hardware problem?
Any suggestions?
yeah it sounds like the same problem, i did try something that worked for the rest of the day. i took the battery out for about 20min and put it back in and it seem to have done the job. ill try tomorrow and see if it stays working. im quite sre this might not be the real answer but for now its a band-aid.
that doesn't seem to work consistently for me.
This is really bothering me, I don't know what to do.
any help?
I live in Fresno, CA and all the suuden my 1 year old tilt stopped working consistently and went from 3G to EDGE to nothing and I could not make or recieve calls etc and my batterys drained quickly. I doenloaded a 3G toggle to turn off 3G and just use EDGE (auto to GPRS). This worked but who wants to work on EDGE. Funny thing is that 3G worked in Sanger which is 15 MIles east of Fresno. SAnger just recently got upgraded to 3G.....
Long story short, I took my phone in and they exchanged it since I had 3 days left on my warranty. The new Tilt with Windows 6.1 is sweet with some new bells and whistles.
Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211
If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
thanks nisse thats very helpfull.
by the way forward to is call forwarding.
Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!
3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
its a setting by your phone provider
yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure
sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.
I have been using a Dutty 6.1 ROM for over a year and had no issues. On a trip thru Ohio (I live in Utah) last month my phone locked up and forced a hard reset. For the remainder of the trip my phone had no call volume which I assumed was a radio issue in the new area. When I got home the sound worked again but a new issue arose. Half of the time I would place a call the phone would pause a few seconds and then immediately 'Call Ended' me without dialing. A lot of incoming calls also would go straight to voicemail without ringing. All of this with full signal bars.
I flashed back to the official AT&T Rom/Radio straight from their site and the conditions still exist. Any ideas?
I have the same problem, I've been using my kaiser for over more than 1 year perfectly, suddenly the troubles began 4 months ago: several times I can't complete a call with the answer "call ended", or the call ends after a time, or the incoming call go straight to voicemail without ringing. All with full signal bars. Sometimes it happens, sometimes everything is ok. I've been trying different roms and radios, without solution. The wifii, bluetooth, etc: always ok. I'm really dissapointed. I'd thank if somebody could give me an idea about it. I live in Argentina and here we don't have service for htc. Thank you very much.
Hi I am using the ATT HTC VIVID from Nov 2011.
I bought this phone last Nov 11, and I stated noticing my phone was not receiving any calls if I stay at home(jersey city). If anyone calls to my number it will not connect at the same time it will not sent to voicemail also. It will say "call couldn't be completed".
After 2 months fight with ATT, they tried
1. they did a factory reset on my phone - it didn't help
2. changed the sim card - it didn't help
3. finally they replaced a another HTC vivid
even that didn't help
finally they said there was issue in near to my home and they fixed it.
now i a started receiving calls but now the new issue is, if I call to my number it will not connect first time it will go to voicemail, and second time if i try then it will ring. (First time also my phone is idle) This is happening randomly and ATT is not helping on this situation. As per them I am not able to replicate when they were testing on my phone.
Because of this issue I am missing calls which is making me really frustrated. After three week of research I found this is happening in not only near to my home its happening at my work place (NYC) and if I go around also its happening.
Can someone please give some advice to fix the issue that would be really great
Is there anyone else in or around your home with AT&T service? If so, do they experience the same problem as you? Can you receive calls everywhere else besides home and work? Do text messages get through? How about internet service? MMS?
Thanks for your response
The issue is not around my place
The issue is, if any one calls first time it will go to voice mail, if they call again it will connect to my phone. This behavior is happening randomly.
It is happening in my work place(NYC) and also if i go some where in new jersey also. I can't tell when its happening and how. In a day it may happen one or two time. I can't check constantly on a day when and where.
Sometime i feel I am not getting call, if i try from land line it may work or it may go to voice mail, after the second try then it will be fine for that day.
this issue look little weird. but because of that I am missing calls.
forgot to mention, that time my internet will work fine, how I am sure is one time i was browsing and trying to call my phone from land line it didn't connect. as usual second time if i try it did connected
Also the signal bar in my home and my work place its full