AAA HELP ME MY P3600 is die - P3600 Software Upgrading

first thingh SORRY FOR MY TERRIBLE ENGLISH
hi
please help me my p3600 don't run i've tryed an hard reset but nothing to do i power on the phone and i see only crazy image grey ble ecc ..
now i' ve tried to format with mtty ok i can do every task but the last one task 8 is blocked the phone restart itself and nothing mtty don't give me any message every thingh is blocked wath can i do please help me

Refer to this forum. I think the method I mentioned may work for you.
http://forum.xda-developers.com/showthread.php?t=531035
Good Luck and hope you can revive your Trinity

Related

pda2k went plank after upgrade need your help

Dear Friends
Good Day To You all …
I have just bought a new pda2k I=mate and I was trying to be a smart person and update its rom and I think I messed up and now I’m getting a blank screen with a word serial on it and USB when I connect the sync cable. And I didn’t make any backup can some one help out im so sad about this thing
Thank you for your help in advance
Regards
Ati
Dont Panic
The first thing is... dont get panic with this.
Just do a soft reset,
put the device in the cradle with active sync on (dont worry of any message that comes on the PC),
double click on the ROM update file
Do the process again.
It will work now!!!
PDA2K upgrade problem
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Re: PDA2K upgrade problem
ati said:
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Click to expand...
Click to collapse
I dunno why ppl are doing the FIRST day a rom upgrade, firstly u should go over the upgrade posts and get familiar with the updates and how to do them. Sorry to say that mate but u deserved ur punishment.
Well since you can't play with your device try reading wiki.

Bricked my Diamoind! help please

Greetings,
I have had my diamond for a year and half now and it works perfectly although it was slow at some times. yesterday I tried to use a ROM made by the community. So first I tried to change to an unsigned HardSPL. I tried 3 different versions however each time I received an error. afterwards I tried to use a HardSPL made for CDMA phones (http://forum.ppcgeeks.com/showthread.php?t=35839) .
I ran the ram update utility I received the invalid model ID error.
Now my device does not start when I press the power button, and I cannot hard reset it .
Please help me to fix this problem
Vinma, YOUR PHONE IS DEAD !!!!!!!!
"first, if you have GSM diamond, this will brick your device. "
you should have read the instructions more careful !!!!!
I remember reading somewhere that there are a few methods to revive dead phones and that 90% of them can be brought back to life.
Please help me if you are aware of any of these methods.
I also have to add that I have contacted HTC regarding this issue and so far they have not been helpful. I would really appreciate it if anyone who has had a similar problem could help me.
Okay, press n hold Volume Down button and try to start the phone..
If you can't start the phone your phone is dead..
But you can save it with JTAG http://forum.revskills.de/viewtopic.php?f=18&t=117&p=639#p639
Or buy a new phone !!!!!!
ur mobile got knocked the f**k out

HELP ! active sync disconnect before rom update

help !
i hope somebody can help me,
i am tree days trying to update my rom on my blue angel (tmobile compact III) and every tim when i try to update the maupgrade starts ,go,s to the next screen and y see the version i have and the one i want to upgrade ,than i say next ,the program let me se the brogres bar and the actice sync disconnect end as jou can gues the program stops and say dat the phone is not connected en finisht.
some reconise this ??? pleas help me !
by the way : sorry for my bad english.
greets marco.
first of all, the compact III is not the blueangel, you might want to check again, what device you have before trying to upgrade again, because otherwise you can seriously harm your device.
and the next thing is:
you should kill you activesync before attempting to upgrade, use maupgradeut_noid instead of baupgradeut and put your device into bootloader mode before connecting it to the pc.
i think you have a lot of reading to do before attempting to upgrade again. the first upgrade is just not that simple and it is not done by connecting the device and just clicking 'upgrade'.
try these step by step instructions: -=here=-
make sure to read the instructions first, all the steps there are important, none of them can be skipped, if you don't understand anything in there, please come back to this thread and ask about it.
from what you described, the way you were going to flash the device was very wrong and could have never worked in the first place, but first of all, make sure, your device is really a blueangel, or else you are in the wrong section of the forum.
it works
thanks chef,
this is not the first time that i upgrade a phone and this pretickulair phone was already upgradet by me.
i think the last time i cid unlocket not permanentley so i cid unlocked and it works.
now i have win mob 6.5.1 rfom D_Two for the blue angel on my device and it works perfect !!
but thanks for the warning !!
greets by me !!!
i didn't mean to offend you or doubt your skills, but from one short post, it is hard to determine the knowledge base of the user posting the question, the blueangel is the mda3 btw. not the compact 3, because that wouold be the tytn, an entirely different device. i'm glad it worked out for you, have fun, d-two's roms are great, fast and stable. enjoy!
sorry tony i was wrong,
i have a mda III not the compact so you where write.
i used now two days and it works super !!
d two is the best !!
greets marco

I think to i dead my blueangel Qtek 9090

Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help

confused

hey guys
i know you have already posted a lot of kaiser bootloader stuck problem
but i'm kind of newbie
real one!!
so
my kaiser stuck
and i tried the mtty tool
but of course the usb port showed up
it's vista
then i tried the ruu tool
and downloaded a rom
the first time it got to 31% and told me there is a problem
today i tried it again
and it completed
but it still stuck
i don't know man
and a problem is that where i live
this kind of phones is not even known
!
pls i hope u can help
with simple steps
cuz i'm not into these things

Categories

Resources