HELP ! active sync disconnect before rom update - MDA III, XDA III, PDA2k, 9090 Software Upgrading

help !
i hope somebody can help me,
i am tree days trying to update my rom on my blue angel (tmobile compact III) and every tim when i try to update the maupgrade starts ,go,s to the next screen and y see the version i have and the one i want to upgrade ,than i say next ,the program let me se the brogres bar and the actice sync disconnect end as jou can gues the program stops and say dat the phone is not connected en finisht.
some reconise this ??? pleas help me !
by the way : sorry for my bad english.
greets marco.

first of all, the compact III is not the blueangel, you might want to check again, what device you have before trying to upgrade again, because otherwise you can seriously harm your device.
and the next thing is:
you should kill you activesync before attempting to upgrade, use maupgradeut_noid instead of baupgradeut and put your device into bootloader mode before connecting it to the pc.
i think you have a lot of reading to do before attempting to upgrade again. the first upgrade is just not that simple and it is not done by connecting the device and just clicking 'upgrade'.
try these step by step instructions: -=here=-
make sure to read the instructions first, all the steps there are important, none of them can be skipped, if you don't understand anything in there, please come back to this thread and ask about it.
from what you described, the way you were going to flash the device was very wrong and could have never worked in the first place, but first of all, make sure, your device is really a blueangel, or else you are in the wrong section of the forum.

it works
thanks chef,
this is not the first time that i upgrade a phone and this pretickulair phone was already upgradet by me.
i think the last time i cid unlocket not permanentley so i cid unlocked and it works.
now i have win mob 6.5.1 rfom D_Two for the blue angel on my device and it works perfect !!
but thanks for the warning !!
greets by me !!!

i didn't mean to offend you or doubt your skills, but from one short post, it is hard to determine the knowledge base of the user posting the question, the blueangel is the mda3 btw. not the compact 3, because that wouold be the tytn, an entirely different device. i'm glad it worked out for you, have fun, d-two's roms are great, fast and stable. enjoy!

sorry tony i was wrong,
i have a mda III not the compact so you where write.
i used now two days and it works super !!
d two is the best !!
greets marco

Related

Help updating ROM

Hello, my name is Kc and I'm new to these forums. I just purchased a Siemens SX66 on the Cingular network. I noticed that there is a ROM upgrade of version 1.40. I have looked around these forums for info but I'm not really familiar with the lingo so I'm not making much progress on my own. Can someone please help me to understand how to update my ROM for my SX66?
ROM Version: 1.32.10 WWE
ROM Date : 12/17/04
Radio Vr. : 1.02.10
Protocol Vr. : 1337.35
ExtROM Vr. : 1.32.115 WWE
Model # : PH20B1
Any help would be great, thank you much.
Read Wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
Still a problem.
First off, thank you TheLastOne, but I'm still having a problem. I tried to install the new Dutch ROM but after I click the update it goes to the next screen telling me what version of stuff I have on my phone then it attempts the update, and then brings up a screen telling me that the country ID is wrong. Did I miss something? Also another question, my display seems to be a little wierd as of late, I have a black boarder around the entire display as if the OS isn't set for the right resolution. Is there a way to make it fit the whole screen?
Thanks again.
~Kc
Figured it out.
Well after a few hours on my phone no longer working I really decided it was time to dig deep and figure it out on my own. I got it up and running with the new Dutch ROM and I'm really happy with it, especially the WiFi, it finds networks much faster now. I have a new question though. I don't use GPRS at all for connecting to the internet, and I have no connections set up. I just want to use WiFi, but I have the annoying 'G' symbol at the top of my PPC. Anyone know of a way for me to get rid of that? Thanks for making this site, and thanks to all the people who contribute. I'm a software developer and you can expect some releases for PPC now that I have one myself.
help with upgrade
its seem that you learn fast so please help me
i also own a cingular sx66 where can i download the dutch rom and how you skip the contry id problem many thank
Did you miss the 2nd post in this thread, seems to have worked for SmearedBlackInk
for mr nobody sunrise swiss
r u missing your mind in the second post it only 1.40 upgrade and not the dutch rom ?????????????
so next time check your post and dont be rude
israel
I'll try to explain
Well it's going to be hard to explain. I used a mix of method 1 and 2 on the page:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
The ROM I used can be downloaded here:
ftp://xda:[email protected]_DT_WWE_DutchRetail_14000_556_11300_Ship.zip
I tried to use method 1 but it just kept giving me a country ID error, so I nuked my ROM, then tried to install using method 2, but it kept stoping halfway through. I mixed my files a bit and used method 1 and some files from method 2 to form a new install folder and voila it worked.
Wow, I just read that and it doesn't really help at all does it.
I think the real trick is just to wipe your ROM before installing. I'd back it up first though, because it's kind of scary when your phone just sits in serial or usb mode and that's it. Sorry I couldn't be of more help.
more help
first many thank for all the links
i change the deviceid=1 and pass the first rom but in the second he stuck
and still give me country error can u help me how u mix the two option
israel
Read wiki. Method one says to download the ROM you want, follow by MaUpgradeUt_noID.ZIP. Unzip MaUpgradeUt_noID.ZIP into your ROMs folder, and run MaUpgradeUt_noID.exe twice and presto...
yop
yes its work many thank as it look a lot better on my first feeling the
wi-fi improve and also the radio bt
hope some more improvement will come in
Can't download MaUpgradeUt_noID.ZIP
broken link???
Sorry my powers are failing me, did you have a link in mind or was this a general why does not somebody search the whole of the site (as in all posts as well as the ftp site and wiki) to work out which link to that file does not work.
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
broken link???
Well not for me, link works fine, opens up a save file dialog.
I get connection refused whilst trying to connect to....
Unplugged router, connected pc directly to modem, worked fine then!
How are you doing this?
Are you in a ftp program and if so have you logged on with the correct user/pwd.
Are you just clicking the link and you firewall software is refusing the download?
Its a problem on your side, the link works fine for me, as is, as posted by you.
PS do you need an answer in the other thread as well?

Maybe CID Lock problem ? NEED HELP !!!!

Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963

Oh Dear !!!Ooooopppsss !!

I have a MDA Vario and had been experiencing problems with an Orange SIM card. Read various posts and the solution was to upgrade the ROM using the Wizard_Love download. Others had the same problem with same (G3) machine and it worked for them,
Everything was going well until my PC crashed when the update was at 98%. Don't know why...didn't even touch anything and had no superfluos progs running
The upshot is that all I'm getting now is the multicolour bootscreen on the MDA
Understandably I am now unable to get the PC to connect to restart the ROM upgrade.
Have I now got myself an expensive paperweight ??
Any help gratefully received, even jokes will be humourously acknowledged.
Thanks in advance.
TIP:
Look towards the end of Dr. Puttingham's thread on unlocking Wizards. You will find someone who mixed an old IPL/SPL pack with an O2 ROM. That worked for me.
Thanks Merlin. I have read Dr P's pages thoroughly afterwards
I have now got the Vario communicating with another PC and trying the ROM retrograde to 1.05. Kept crashing on my Laptop at 98%
Now trying another m/c....I hope it works !!
Thanks for the response.
Well, I've got out of bootmode !!!
I used the Button 1.05 upgrade as suggest by Dr P and now back to Windows. I will follow the rest of his advice now ...
Just a quick post to say that I am now back up and running.
Thanks to Merlin and the fantatstic Dr P's stickie I'm back in business !!
Glad to help
But next time, RTFM

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files

Have you unlocked your Jade?

Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila
I actually tried few times yesterday and today, but I am getting "Server is down" message .
i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)
Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.
fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
i did it with the first attempt with v3, no problem and i'm really happy
Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.
for me dont work the hard spl....
I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?
fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you
no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)
the link is dead!!
lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works
keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.
Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model
Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.
it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK

Categories

Resources