HI ! I have a locked Kaiser ! I have been tried to unlook it using nuespl, in the installation proccess phone stuck and i made a soft reset , after this the phone display is black and the light is green, can not acces bootloader ,active sync do not recognize my kaiser but when I connect throught mtty I can use the following commands :
radata
powerdown
setboot
GO2AMSS
rseed
pmic_vib_off
pmic_vreg
pmic_level
pmic_vib_on
rpass
Please help me make my kaiser working !!!
IP13 said:
HI ! I have a locked Kaiser ! I have been tried to unlook it using nuespl
Click to expand...
Click to collapse
What on earth made you think nuespl would work on a Kaiser/TyTN II Everything I've been able to find out about nuespl by searching for it here, shows it's for use with the HTC Titan (not TyTN II which uses either the original HTC spl or if customised hardSPL). I suggest you/anyone else considering any flashing reads the relevant parts of the wiki here before taking any action (and making any potentially expensive mistakes).
I'm not familiar with MTTY but maybe someone else who is, can advise if your device is salvageable.
Flying Kiwi said:
What on earth made you think nuespl would work on a Kaiser/TyTN II Everything I've been able to find out about nuespl by searching for it here, shows it's for use with the HTC Titan (not TyTN II which uses either the original HTC spl or if customised hardSPL). I suggest you/anyone else considering any flashing reads the relevant parts of the wiki here before taking any action (and making any potentially expensive mistakes).
I'm not familiar with mitty but maybe someone else who is, can advise if your device is salvageable.
Click to expand...
Click to collapse
Titan = TyTN II looks the same Honest mistake
You bricked your phone dude, by not reading and understanding. I know that the last thing you need is a scolding right after you killed your $500 phone but this is for all others who feel the need to jump right in the deep end without testing the depth of the water first.
denco7 said:
Titan = TyTN II looks the same Honest mistake
You bricked your phone dude, by not reading and understanding. I know that thing you need is a scolding right after you killed your $500 phone but this is for all others who feel the need to jump right in the deep end without testing the depth of the water first.
Click to expand...
Click to collapse
Is it possible to unbrick it ?
IP13 said:
Is it possible to unbrick it ?
Click to expand...
Click to collapse
Yes but the cost of a new motherboard may make it beyond economical repair - check with your local HTC base/agent for full details. See my reply to one of your other posts about this also.
Related
Don't be too harsh, I'm a noob here.
First of all: I've purchased SPV m700 with instructions how to unlock it. During flashing something went wrong, the PC reset etc. Now I've got nice three colour screen on my PDA and cannot do anything, even turn it on or off. I suppose it cleaned the old ROM and did not manage to write a new one.
I've read this thread: http://forum.xda-developers.com/showthread.php?t=308691
and TBH cannot understand a thing from it
Is there any straightforward way I can unbrick it? You know, something that a guy without a vast programing experience could manage to do? Cheers in advance good people!
OK, thanks guys for great support and warm welcome...NOT.
No, I won't start crying here, just hope I'll meet one of you uberman 'experts' from this forum on one of the forums I'm an expert on and will be able to recognize you. Best wishes.
Anyway, just for the record of other newbees who struggle to get any answers: I managed to unbrick my SPV M700. I had no idea what I was doing, neither will you I guess, do not come to me crying if it doesn't work or if it makes your device a real, solid brick. It may work only for Orange SPV, no clue as to HTC P3600, Trinity or others.
I ran the thing from this thread: http://forum.xda-developers.com/showthread.php?t=309959
It failed to finish running, showed 'error[270] invalid image' or something similar...
But the device was back to normal again So I'm one happy bunny.
Hopefully it will give others ideas on how to deal with their problems. Good luck to you all. I'm off.
Dont let this little incident put you off upgrading to WM6, just read the threads thoroughly first, then FLASH!
im on UK M700 with Mun_Rus 2.00.SE WM6 ROM
FANTASTIC!
GO FOR IT!
goodie said:
Dont let this little incident put you off upgrading to WM6, just read the threads thoroughly first, then FLASH!
im on UK M700 with Mun_Rus 2.00.SE WM6 ROM
FANTASTIC!
GO FOR IT!
Click to expand...
Click to collapse
What I worry about is loosing warranty (although I'm not sure if I've got one at all - beware of Ebay seller id1emind!!!). Well, TBH I do worry about bricking it again too...
Hello everyone,
having read the Kaiser wiki fairly extensively, I still haven't been able to find the answer to the most important question I had about it.
I recently purchased a v1615 (Vodafone branded Tilt) and the geek inside of me is burning to install a new rom onto it as the one that came with it sucks bad.
Would anybody be able to suggest which are the most popular (i.e best for most common usage) roms out there at the moment?
Thanks in advance for any help you might be able to give me.
Gab
The original rom in my tilt was very slow. I flashed my kaiser with one of Dutty's roms and its now much faster and already has most of the software I need already installed.
I like Duttys but Slueth has been the best for me so far.
Gowardo said:
Hello everyone,
having read the Kaiser wiki fairly extensively, I still haven't been able to find the answer to the most important question I had about it.
I recently purchased a v1615 (Vodafone branded Tilt) and the geek inside of me is burning to install a new rom onto it as the one that came with it sucks bad.
Would anybody be able to suggest which are the most popular (i.e best for most common usage) roms out there at the moment?
Thanks in advance for any help you might be able to give me.
Gab
Click to expand...
Click to collapse
If you really want to let the true geek in you out to play. Try them all. And I will see you at the NExt Flashers Anon Meeting.
hehe,
I appreciate all the advice.
I already have had a bit of a look around the forums now all I need to do is figure out which roms are where and then I'll start trying stuff out... thanks guys
Edit: Also, I have never actually flashed a smartphone before, I bow to those of you who have been in the "business" for a while, but me thinks I might need a bit more time to learn... the thing is, what sort of chance do you think there is that the whole process will drive me crazy? Seems a lil complicated, but doable so far. Just need to understand what all the various different things are for. (I.e. why radios aren't included in roms, and what they are actually for ..yaeh, im THAT noobish).
Anyhoo, thanks again fellas.
If you can follow simple intructions then I think you're going to be ok.
I'm sure I will be fine, but I have a feeling I might take advantage of the more generous of you at some point in the future again...
Gowardo said:
I'm sure I will be fine, but I have a feeling I might take advantage of the more generous of you at some point in the future again...
Click to expand...
Click to collapse
That will cost you some true blue Italian Manicotti.
Edit:
All joking aside, you'll be fine. You have already done more than most by reading the Wiki. Might I also suggest the FAQ Wiki. Have fun and welcome to Rom Flashers Anon.
Gowardo said:
Hello everyone,
having read the Kaiser wiki fairly extensively, I still haven't been able to find the answer to the most important question I had about it.
I recently purchased a v1615 (Vodafone branded Tilt) and the geek inside of me is burning to install a new rom onto it as the one that came with it sucks bad.
Would anybody be able to suggest which are the most popular (i.e best for most common usage) roms out there at the moment?
Thanks in advance for any help you might be able to give me.
Gab
Click to expand...
Click to collapse
Welcome to the flashing club lol.
There is no "best" rom , just find the one that you think is "best" for you.
Yea, the Wiki and Faq here is very noob friendly. I started up as a new ppc user , but It has been so smooth. Most of the flashing trouble can be recover , as long as you dont mess with advance stuff like MTTY .
Try Dutty rom , they are very popular and updated frequently.
make sure you have hard SPL before flashing.
Peeps here are very friendly , as long as you read and research before any question.
First I'd like to mention that I am grateful for all the developers on XDA working on these phones. I'm no programmer but I know plenty who are in all fields so I can appreciate what you are all doing.
I just wanted to create this thread to see how close we are to getting our hands on the HardSPL for Rhodium and any updates on development.
I've had my Touch Pro 2 for about a week and half now and already bored with it. The phone itself is great, but Windows Mobile 6.1 seriously sucks.
I really want to start using Windows Mobile 6.5, which brings me to why I created this post.
If anyone can shed some light on this I'd appreciate it.
Adam
Olipro and cmonex are still searching for mobile devices with hynix memory to test some stuff.
In short, don't expect anything soon and have patience
what
how do we know if it has that memory so others can help look.
just asked permission to Olipro if it was ok if I wrote a tutorial regarding this...
Uhm...I'll open a new thread with step-by-step instructions on how to help them out
Hope it will help them. Gimme about an hour to write a detailed tutorial.
*EDIT* Tutorial is up: http://forum.xda-developers.com/showthread.php?p=4035499#post4035499
hmm this thread will be good for the usual "hardspl waititing posts".. when release comes, we (olinex) will just create the real hspl thread, so mods will not have to clean up for release (like for topaz they had to).
as to why this flash type checking is so important: on topaz the hynix ones really just got lucky by not getting their mfg partition corrupt. (no one got it corrupt but as i said that was luck) i want to avoid any such problems on rhodium.
cmonex said:
hmm this thread will be good for the usual "hardspl waititing posts".. when release comes, we (olinex) will just create the real hspl thread, so mods will not have to clean up for release (like for topaz they had to).
as to why this flash type checking is so important: on topaz the hynix ones really just got lucky by not getting their mfg partition corrupt. (no one got it corrupt but as i said that was luck) i want to avoid any such problems on rhodium.
Click to expand...
Click to collapse
?
Does this mean there is a feasible solution for Samsung based units ?
I am surprised that it makes a difference based on the fact HTC wont have made a separate spl for hynix based units. and rom upgrades will contain the same info...
can hard spl for samsungs be realeased with a link to the tutorial on how to ensure you have samsung?
darides tutorial suggests most people seem to have samsung anyway.
infact has ther been a hynix unit seen in the wild?
Cheers
Steve
rosebud said:
?
Does this mean there is a feasible solution for Samsung based units ?
I am surprised that it makes a difference based on the fact HTC wont have made a separate spl for hynix based units. and rom upgrades will contain the same info...
can hard spl for samsungs be realeased with a link to the tutorial on how to ensure you have samsung?
darides tutorial suggests most people seem to have samsung anyway.
infact has ther been a hynix unit seen in the wild?
Cheers
Steve
Click to expand...
Click to collapse
Perhaps Olinex can make a version for samsung that checks on the sspl that the memory is samsung or not. to avoid bricks or other problems.
I have not seen or know anyone with hynix memory on their tp2 after checking about 5 different units from my friends and family they are all samsung. My vodafone one is samsung too.
it's great news for me
is it a problem if everybody have the samsung chipset ?
just letting you know no updates yet - was busy in real life
what is real life ?
thats, from where you getting the pizza... ;-)
SubData said:
thats, from where you getting the pizza... ;-)
Click to expand...
Click to collapse
lol, yes.
SubData said:
thats, from where you getting the pizza... ;-)
Click to expand...
Click to collapse
I prefer virtual pizza! I download it, print it and won´t get fat...
greets
Alfons
Please can we have an ETA for the release of the HardSPL.
Hi Guys,
I can't put into words how much I respect and revere the information posted on your web-site and I apologise for asking the million dollar question. But I need to know.
Can we please have an ETA / timeline for the release of the HardSPL for our HTC Rhodium.
I hate my Vodafone UK branded HTC Touch Pro 2. It is red and so am I with anger. Joking aside I love HTC standard ROM's. The last one I put on my HTC Touch Pro was amazing.
Please, keep up the work....
Kind regards...
Sumeet...
SumeetKapur said:
Hi Guys,
I can't put into words how much I respect and revere the information posted on your web-site and I apologise for asking the million dollar question. But I need to know.
Can we please have an ETA / timeline for the release of the HardSPL for our HTC Rhodium.
I hate my Vodafone UK branded HTC Touch Pro 2. It is red and so am I with anger. Joking aside I love HTC standard ROM's. The last one I put on my HTC Touch Pro was amazing.
Please, keep up the work....
Kind regards...
Sumeet...
Click to expand...
Click to collapse
Q: How long is a piece of string?
A: Double the half of its length.
SumeetKapur said:
Hi Guys,
I can't put into words how much I respect and revere the information posted on your web-site and I apologise for asking the million dollar question. But I need to know.
Can we please have an ETA / timeline for the release of the HardSPL for our HTC Rhodium.
I hate my Vodafone UK branded HTC Touch Pro 2. It is red and so am I with anger. Joking aside I love HTC standard ROM's. The last one I put on my HTC Touch Pro was amazing.
Please, keep up the work....
Kind regards...
Sumeet...
Click to expand...
Click to collapse
If you want to flash the HTC Shipped ROM, look out for the Goldcard methods. I'm not going into detail here because it's off topic and well documented else where. If all else fails cmonex normally helps via PM.
Ta
Dave
I can totally understand people begging for this. I nervously waiting for it to, but not to install custom ROMs. I'm waiting for it to get blackberry connect running. To achieve that I need to manipulate the device ID in the ROM itself, to fool RIM, let them think it's running on a proper device. But to flash this manipulated ROM I need HSPL (or does someone know a way to manipulate the device ID (HTC-Rhodium) in another way?).
However, asking and begging does not help or make stuff easier or getting it done faster. We all need to be brave and patient and wait a bit and let olipro and cmonex get this stuff done.
Cheers
c0rnholio said:
I can totally understand people begging for this. I nervously waiting for it to, but not to install custom ROMs. I'm waiting for it to get blackberry connect running. To achieve that I need to manipulate the device ID in the ROM itself, to fool RIM, let them think it's running on a proper device. But to flash this manipulated ROM I need HSPL (or does someone know a way to manipulate the device ID (HTC-Rhodium) in another way?).
However, asking and begging does not help or make stuff easier or getting it done faster. We all need to be brave and patient and wait a bit and let olipro and cmonex get this stuff done.
Cheers
Click to expand...
Click to collapse
Sorry to go a bit OT here but I am interested in your info about Blackberry Connect. I have just come to the TP2 from a Storm and one thing that is lagging behind with the TP2 IMO is the push email, would the 'updated' ROM you are proposing allow me to use the pushmail service from BB ?
Thanks,
Neil
c0rnholio said:
I can totally understand people begging for this. I nervously waiting for it to, but not to install custom ROMs. I'm waiting for it to get blackberry connect running. To achieve that I need to manipulate the device ID in the ROM itself, to fool RIM, let them think it's running on a proper device. But to flash this manipulated ROM I need HSPL (or does someone know a way to manipulate the device ID (HTC-Rhodium) in another way?).
However, asking and begging does not help or make stuff easier or getting it done faster. We all need to be brave and patient and wait a bit and let olipro and cmonex get this stuff done.
Cheers
Click to expand...
Click to collapse
Have you tried to change your AKU?
If NO you can change this:
HKEY_LOCAL_MACHINE/System/Versions/Aku
and put this:
.1.4.3
Hello all;
I know some people who have tried flashing ROMs in the wrong way, or used bad ROMs, or maybe used ROMs for other devices on theirs, which made them end up with a dead device in the end.
And because HTC doesn't support such misuse of the device, you might end up throwing the device away...
Anyway; if you have a dead HTC Diamond, or any other HTC device, I can fix it for you.
My prices are cheap because I deal with such devices daily, and it depends on the damage happened to the device.
For more info; please don't hesitate to PM me.
Good luck all
Where To Send It To?
Hello there. May I know your location? And how much is considered cheap?
foksh said:
Hello all;
I know some people who have tried flashing ROMs in the wrong way, or used bad ROMs, or maybe used ROMs for other devices on theirs, which made them end up with a dead device in the end.
And because HTC doesn't support such misuse of the device, you might end up throwing the device away...
Anyway; if you have a dead HTC Diamond, or any other HTC device, I can fix it for you.
My prices are cheap because I deal with such devices daily, and it depends on the damage happened to the device.
For more info; please don't hesitate to PM me.
Good luck all
Click to expand...
Click to collapse
WHat ? ... ??
As interesting as it sounds, you are a user with 2 posts to your name without any cred in the community.
enigma1nz said:
As interesting as it sounds, you are a user with 2 posts to your name without any cred in the community.
Click to expand...
Click to collapse
Couldn't have said it any better...
HTc diamond dead
Hi,
May i know who's anyone to fixed HTC diamond dead? because i have htc diamond and i try to flash hard SPL i get it from pcc geeks site..i think i got a wrong SPL, i installed it to my device then after that my device was going to black screen and it wont turn it on..my diamond is totally dead..please advice me if anyone who's know how to fixed it and i really appreciate it!..thnx a lot!!
may i know where is your exact location and number? i'm here in philippines.. i'm very thankfull to hear it that you are able to fixed dead diamond on cheap price..
here's my issue.. before, my htc diamond are all good working condition but i'll try to flash SPL on my device because i want to change rom of it then suddenly when i install SPL on My device screen is going to black then totally dead then my device won't turn it on and i'll try to take it out my battery for a minutes nothing happen it is still the same..still wont turn on..i think i've installed a wrong SPL that not compatible for my device..please do help me!! i know you are the one who can help my problems..it will be pleasure to thank you if u would help me for this..
*** greeting ***
Hello everybody
that's my first post around and sadly that's cause i need some help
*** short story ***
I did flash my kaiser with a bad rom and now everything is down
No way to turn on this lil thing, no light, nothing, it's dead
If anyone got an idea ..
*** long story ***
I put a hyperdragon on it, was working quite fine even if was SoD now and then
I though android would be fun to try and i did install it, following the android install guide, was not working cause of a locked sim
After some read i understand it was cause of the locked sim and ... installed a branded ROM (followed the idiot guide for restoring the kaiser), it worked quite well
I unlocked the sim and installed again the android ...didn't worked ..
from here i tried things like installing new hardSPL, tried the jumpSPL method, installed another ROM, reinstalled the "idiot" rom (that worked again) ..
And i finally end up with the greeeeeeeeeeeeeat idea of putting back the original branded ROM that i found on another website ....sadly i didn't pay attention to the fact it was the bad model (diamond and not kaiser)
When i saw the reality it was already too late and my kaiser was happily saying "hey everything is okay, i'll reboot now" and ... it never wake up
*** what i need **
so now i'm in desperate need of an advice, lead, help, chocolate, beer, condolences
In short ... i'll take anything that you can offer to me.. even a "sorry pal, i know how it feels but it's dead" will be okay cause at least i'll know there's no hope for my poor lil thing, killed by my wtupidity
Best regards
I don't want to be the one to tell you this, but I'm pretty sure you have a expensive brick on your hands.
Flashing a rom not designed for your phone...that's the outcome of it..sorry
lead answer
well, after reading your commnets here here i ididn't get which brick you are talking about , if you have something like gold brick then i must say that you are going to rich and famous.
lynnabelone said:
well, after reading your commnets here here i ididn't get which brick you are talking about , if you have something like gold brick then i must say that you are going to rich and famous.
Click to expand...
Click to collapse
by brick he meant the phone is now as good as a brick in otherwords useless and dead but expensive
why do not you try artificial FrankenKaiser JockyW2001 !!! I think it can help you . My advice learned well before trying it " Success comes from an earnest "