Related
Well, I followed the HOW-TO's... and sort downgraded my phone from HTC cupcake build to RC29... then I rooted my phone first and then directly loaded the J.F 1.51 (latest update by JF on the blog)
But here's the problem... (DOH!) forgot the install the new radio first!!!
Now i have JF1.5 with RADIO-1.22.12.29 (I know i need to install the radio with the ending that has 26I)... I already put on the HardSPL and have the PVT board
and here's my question:: I dont 3G as it is (AT ALL)... I got rid of the data plan a while back...
now Should I go ahead and perform the Update with the new radio without worrying? Do i Need to? or would I have to do anything else???
Thanks a lot every one!!
Here's the Radio Information and everything.
Here's what I have when i click the camera button + Power::
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
pokerace said:
Well, I followed the HOW-TO's... and sort downgraded my phone from HTC cupcake build to RC29... then I rooted my phone first and then directly loaded the J.F 1.51 (latest update by JF on the blog)
But here's the problem... (DOH!) forgot the install the new radio first!!!
Now i have JF1.5 with RADIO-1.22.12.29 (I know i need to install the radio with the ending that has 26I)... I already put on the HardSPL and have the PVT board
and here's my question:: I dont 3G as it is (AT ALL)... I got rid of the data plan a while back...
now Should I go ahead and perform the Update with the new radio without worrying? Do i Need to? or would I have to do anything else???
Thanks a lot every one!!
Here's the Radio Information and everything.
Here's what I have when i click the camera button + Power::
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
Click to expand...
Click to collapse
I would downgrade to RC29, re-root, re-update to JF1.51, update the radio, then finally update the spl. Whew, think I got the steps correct!
screwthe49ers said:
I would downgrade to RC29, re-root, re-update to JF1.51, update the radio, then finally update the spl. Whew, think I got the steps correct!
Click to expand...
Click to collapse
waaaiit lol wouldn't that be just like what i have it at right now? im at the JF1.51 update right now (but haven't updated the radio)... and I read somewhere that you should update the radio BEFORE you put in the jesus freke build. and you gnna have to help me out on the spl part... sorta new to this but learning quick
thankss for your reply though
did you get any response to this?
I have the same setup as you, but I want to upgrade over to HERO. I just want to know how to upgrade the Radio and where/how to upgrade the SPL (btw - wtf is the SPL) that HERO uses
thanks
What are all the different spls for Dream Aka G1? i keep hearing like danger and hard spl?
http://forum.xda-developers.com/showthread.php?t=455860
htcclay said:
http://forum.xda-developers.com/showthread.php?t=455860
Click to expand...
Click to collapse
Thanks for the link i tried searching but couldnt find it.
That covers the "safe" SPLs, though in theory a bad flash with any bootloader can brick a phone. If you're interested in the "Danger" SPL, which is also known as the Haykuro SPL or the "newest" SPL, check the link in my sig. This SPL really isn't a problem to flash if you have a PVT board and if you make sure to flash to the latest radio first. It also frees up more room on your device, because it takes up less space and repartitions your device accordingly.
Hello I have a mytouch3g with CM 4.2.10.1. Both my radio and SPL are the stock ones.
Now, I want to flash my Perfect SPL to a Non perfect one.
First of all can someone FINALLY explain to me what a non perfect SPL will do for me?
And can someone please epxplain WHICH SPL to use and a step by step guide on how to flash it? i dont want to brick my phone . I HAVE googled this and have found guides for G1 and 32A but not for mytouch (32B)
Also im not sure if this is where to post but because Dream Dev forums also server as Magic 32B forums Im going out on a limb here lol
Again any help would be appreciated!
as long as you are running CM rom you don't need to flash/update spl
... wat if i want to try another rom?
can you please not reply 'you dont need it' and instead reply what the benefits are and how to flash it?
thanks!
The reason you flash a new SPL is so that you can use different ROMs that need it. Unless you want to switch from Cyanogen then there isn't a reason to flash a new SPL. If you want to flash Haykuro's SPL (A.K.A "Death" SPL) then here are my instructions.
1. Make sure you have a custom recovery.img like Amon-Ra's or Cyan's
2. Download the new radio and Haykuro's SPL from here. http://code.google.com/p/sapphire-port-dream/
Also download whatever new ROM you want to try out that uses the new SPL. Put those 3 .zips onto your SD card.
3. Put your phone into recovery and make a Nand Backup, just in case.
4. FLASH THE RADIO FIRST!!! IF YOU FLASH THE SPL BEFORE THE RADIO THEN YOUR PHONE WILL BRICK!!!
5. Flash the SPL.
6. Flash your new ROM.
Yes, exactly in that order, and yes, you have to flash a new ROM or reflash the one you're using.
BTW, I am not responsible if you brick your phone.
what about flashing custom splash images?
and yes i do want to try some other roms
melterx12 said:
what about flashing custom splash images?
and yes i do want to try some other roms
Click to expand...
Click to collapse
Those you'll need fastboot for, and a fastboot-enabled spl (i.e. Haykuro spl). There are very nice guides in the theme section on what you'll need and how to do it
melterx12 said:
Hello I have a mytouch3g with CM 4.2.10.1. Both my radio and SPL are the stock ones.
Now, I want to flash my Perfect SPL to a Non perfect one.
First of all can someone FINALLY explain to me what a non perfect SPL will do for me?
And can someone please epxplain WHICH SPL to use and a step by step guide on how to flash it? i dont want to brick my phone . I HAVE googled this and have found guides for G1 and 32A but not for mytouch (32B)
Also im not sure if this is where to post but because Dream Dev forums also server as Magic 32B forums Im going out on a limb here lol
Again any help would be appreciated!
Click to expand...
Click to collapse
Since you said you're on a T-Mobile MyTouch 3G you might want to check out this thread
http://forum.xda-developers.com/showthread.php?t=529019
Using an SPL file for the dream, like you've been linked to in a previous post could quite possibly brick you're phone.
CyanogenMod work's on both Dream's & Sapphires but not all associated fies for theese phone are interchangeable, solely based on the fact that the ROM you're using is.
My best advice to you would be to browse the Sapphire threads before going any further with you're mod's
woot flashed my SPL to 1.33.2005 and it worked like a charm! also flashed my splash image.
jsut one question: on my bootloader screen the SPL says H, instead of G. My stock perfect SPL said G. I know H stands for HTC SPL and G is the Google SPL, but what is the difference in functionality?
melterx12 said:
woot flashed my SPL to 1.33.2005 and it worked like a charm! also flashed my splash image.
jsut one question: on my bootloader screen the SPL says H, instead of G. My stock perfect SPL said G. I know H stands for HTC SPL and G is the Google SPL, but what is the difference in functionality?
Click to expand...
Click to collapse
Did you flash the radio?
Haykuro SPL allows larger roms to be installed(i feel like a broken record repeating this) that's all you need to know the other details arent necessary to know.
no i did not flash the radio? why, do i need to?
melterx12 said:
no i did not flash the radio? why, do i need to?
Click to expand...
Click to collapse
Then you will brick you phone, radio first then SPL
this is all my info on bootloader:
------------------------------------
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
APR 20 2009, 15:30:43
[FASTBOOT]
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
------------------------------------
I followed the instructions from the first post here
http://forum.xda-developers.com/showthread.php?t=548218&page=14
but it mentioned nothing of flashing the radio... do i need to flash one? AM I SCREWED????
melterx12 said:
this is all my info on bootloader:
------------------------------------
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
APR 20 2009, 15:30:43
[FASTBOOT]
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
------------------------------------
I followed the instructions from the first post here
http://forum.xda-developers.com/showthread.php?t=548218&page=14
but it mentioned nothing of flashing the radio... do i need to flash one? AM I SCREWED????
Click to expand...
Click to collapse
You didnt mention you had the 26I radio, nevermind then thought you had a older one. Also you should have said your using mt3g since it doesnt need the radio.
i did say i have a mt3g its in my original post
im so confused. I KNOW i didnt brick my phone causei m already booted into cyanogen mod and definatly NOT bricked.
so wat the hell is going on????
why is my letter changed from a G to an H? what does this mean to me?
melterx12 said:
i did say i have a mt3g its in my original post
im so confused. I KNOW i didnt brick my phone causei m already booted into cyanogen mod and definatly NOT bricked.
so wat the hell is going on????
why is my letter changed from a G to an H? what does this mean to me?
Click to expand...
Click to collapse
Nothing. you didnt brick, i got you confused with someone else that asked about help with rooting.
You dont need to worry about the stuff in bootloader its from the SPL upgrade.
then why did my letter change from a G to an H?
should i flash something else?
im freaking out right now !
melterx12 said:
then why did my letter change from a G to an H?
should i flash something else?
im freaking out right now !
Click to expand...
Click to collapse
Do you mean in fastboot?
Its suppose to change...
I dont understand why your so concerned with that, its should say Hboot.
Sapphire/Magic/Ion/MT3G roms are here, some G1 roms work though
http://forum.xda-developers.com/forumdisplay.php?f=493
what?? No everything works i can load into bootloader, change from Hboot mode to fastboot mode, i can boot into my ROM (cyanogen 4.2.10.1) and everything seems to be working.
to clarify: in bootloader, on top it it used to show me (on stock perfect SPL) SAPPHIRE PVT 32B ENG S-ON G
now it shows me (on danger SPL) SAPPHIRE PVT 32B ENG S-OFF H
the G changed to an H
I have read that the H stands for an HTC SPL and G stands for Google SPL. Since the stock SPL was google and I changed to HTC is this going to cause any problems? and was it suppose to change to an H in the first place or did i do something wrong??
melterx12 said:
I have read that the H stands for an HTC SPL and G stands for Google SPL. Since the stock SPL was google and I changed to HTC is this going to cause any problems? and was it suppose to change to an H in the first place or did i do something wrong??
Click to expand...
Click to collapse
You didnt say that though, i was unsure of what you meant. You see that SPL is from the HTC Magic which has the H not G. It suppose to show H. That is the HTC SPL not the standard google one shiiped w/ google experience phones .
i understand that but does this affect my Mytouch 3g (which is a google phone) in any way?
Hi everybody
I rooted a G1, I downgrade it with 29RC, then I made the installation of the recovery-RA-dream-v1.7.0 following the flashed the radio (G1-radio-2_22_23_02 and the spl (Latest G1 SPL). I used the 1.6 DRD 3611745 test-keys rooted firmware.
Everything is working well, but when I try to install a firmware as update-cm-6.0.0-DS-RC3-signed, Chromatic 4.4 or extreme-froyo an error showed:
Code:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
E:Error in /sdcard/update-cm-6.0.0-DS-RC3-signed (Status 7)
Installation aborted.
Also I tried to update it with update-cm-5.0.7-DS-test3-signed and it was accepted but it does not boot, it stay with the G1 logo.
What could be wrong?, I restore with my rooted backup (1.6) and it work again without problems.
Your comments with be appreciated.
bengar
bengar said:
getprop("ro.bootloader")=="1.33.2011" II ( this message is repeated on the G1)
Click to expand...
Click to collapse
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
oldnoob said:
Since no one else has answered I'll give it a try. The 1.33.2011 bootloader line sounds fishy on a G1. What does the actual bootloader screen say? (Camera+Power startup)
Click to expand...
Click to collapse
Thank you oldnoob for the response. Well it looks like this:
Code:
DREA100 PVT 32B
CLPD-4
RADIO-2.22.23.02
Oct 20 2008
Ok what he is mainly asking you is in bootloader you see the spl. That's what he's saying looks fishy. The rest of what you got looks ok. So tell him what spl your reading in bootloader. And what your bootloader looks like.
sent from my superfroyo dream
Xx12thANG3LxX
Thank you, the spl read as follow:
HSPL10.95.3000
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Xx12thANG3LxX said:
So just make sure you go into bootloader holding camera+power button together. Make sure you have radio 2.22.23.02 then you may flash the 1.33.2005 danger spl. Then when you go back into bootloader you'll see the new spl. And the bootloader will have three android skateboarders on it. Then you know your good. And then boot recovery. Wipe. Flash the rom .zip from sdcard. See the problem your having is the spl you have right now. Can't handle the size of the rom your trying to flash.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
Thank you very much, that was the problem as I see I used a wrong spl. But when I hold the camera+power button together I have the three android skateboard on it. Right now I have the G1 with the 1.6 version rooted. In order to make it works for future firmware versions I will need to unroot the G1 with downgrade it again to the RC29, then downgrade the original radio and spl and start from scratch. Or only reflash the new radio and reflash spl but using the danger version.
PD
This G1 is not my is from a friend, but compared with my G1 and it has the danger spl, I will need to reflash the danger spl to my friends' G1.
regards
bengar
Xx12thANG3LxX said:
Ok well you know you flashed the radio if it says 2.22.23.02. You have the pvt goin on. So now for the scary part. 1.33.2005 danger spl. As long as you have that radio your good. But make sure ya hear me!!!! When you flash rc29 it will downgrade that radio. So you have to reflash it. BEFORE danger spl 1.33.2005
Good luck may the force be with you!!!
sent from superfroyo dream
Click to expand...
Click to collapse
Why you guys want to install always DangerSPL? It's never needed, there are much more flexible and more secure ways to get enough space for FroYo-ROMs.
Only my 2 cent.
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Xx12thANG3LxX said:
Andisa has a point. Not super needed anymore. But its just what I run. And once you got it the first time. No headache or chances after that. But no when you change roms you do not need to go and do that all over again to answer your question. So now if you have the proper radio and spl. You installed a custom recovery. Now go ahead put zip file on sd wipe and flash. You should be good to go.
sent from superfroyo dream
Click to expand...
Click to collapse
Xx12thANG3LxX
In my own G1, I have the danger spl installed too and never have had any problems with it, in this case, when I was flashing this G1 I knew that I was using the last radio but when I was ready to flash the spl I saw that I had two versions, the Latest G1 SPL, and haykuro_new_spl-signed.
I had selected the Lastest G1, After that I flashed with the last roms mentioned above and here I am trying to fix this. All the ways, the 1.6 is running smooth. Thank you for all and I am very happy to all your help.
bengar
No problem. I'm glad we got it working for ya
sent from superfroyo dream
I have a Rogers Dream/G1 with T-Mobile rc29 rom (doh!), which works and is usable but I want to get back to CM5. Please show me the way or put me out of my misery if its hopeless.
Recovery hangs at Tmobile G1 screen.
Fastboot gives me "00028002 Not Allow" code then is stuck with serial0.
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Tried Adb to get amon-ra 1.7.0, but still won't boot into recovery and is stuck at G1 screen. No memory error, just an immediate echo of the "flash_image recovery data/local/recovery.img" command after I hit enter.
fastboot won't show my device in cmd when at the 4colored screen but adb does recognize.
I'm pretty sure I mixed up the radio and spl, but does having access to the OS give me any options?
Please, point me in the right direction.
****SOLVED**** see Post#20 for my conclusion.
Download clockwork recovery, flash clockwork, then you'll have recovery?
Not sure tho, I think this was how I did it.
I think what you're talking about is ROM Manager, it includes Clockwork Recovery if I understand the dev's description correctly. I haven't tried it myself though.
Seems to me, that he is on a stock ROM and doesn't have root access.
If the phone is booting, a chance could be, to install 1-click-root (don't know how it is called exactly, but you can google for it) and then from there to install a custom recovery. After that, you can install CM5 or something else. Probably first I would install is an engineering SPL (1.33.2003 for example) which supports fastboot. With your current SPL you will not have a chance to get fastboot running.
But be careful: 1.33.2003 supports only radio version 1.x and 2.x. I am not sure if 1.33.2003 is the best solution for you, because you have a rogers dream.
i recomend the old way.. get the fflashrecapk. and use io file manager to flash it.. only problem is you need to be 1.5 if your on 1.6 than you need to downgrade.. but that would be difficult since you have no recovery lol
While a bit more work.. before all the how to's confuse you into bricking your phone, I'd make yourself a gold card, and use it to flash the orange nbh from the 2708+ thread.. (rename to DREAIMG.nbh and place on the goldcard, then boot with camera+power it will ask you to flash it)
Once you have the orange rom you will have fastboot and a 2.x radio.. if you don't need the 3.22 radio .. just flash the 2708+ radio+spl+hboot as per normal followed by a rom.. if you do need the 3.22 radio (rogers customer who has not signed the wavier and wishes to keep data) either flash the rogers e911 update and re-root or 1.33.2005+3.22.26.17 and a rom
Sorry lack of links.
is it rooted?
maybe you can flash the recovery through terminal
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
kl3vr said:
Thanks for the replies, lots to research.
I'v tried a bunch of rooting methods.
exploid pushed from ADB said it worked (but didnt)
SuperOneClick said it worked after some rapid OFF-ON-OFF-ON debugging(but didnt install superuser even after reboot)
Universal androot forcecloses on launch
flashrec has the "download cyan...." button blocked out, tried renaming amon-ra to the recovery-backup.img and it said successful, but still is stuck at g1 screen.
I found another post with someone in the same situation at:
http://forum.xda-developers.com/archive/index.php/t-580669.html
They did the same thing by flashing the tmobile firmware 1.0 and we have the same numbers:
Model Number: T-Mobile G1
Firmware version: 1.0
Baseband Version: 62.33.20.08H_1.22.12.29
Kernel Version: 2.6.25-01843-gfea26b0 [email protected]#6
Build Number: kila-user 1.0 TC4-R29 115247 ota-rel-keys,release-keys
When I start up (CAMERA + POWER) I get the following settings (on red/green/blue/white screen *sigh*)
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
Funny thing is I was so excited when SuperOneClick said it was successful and asked if I wanted to donate that I didnt even check if I had superuser before going through paypal. I'v wasted so many hours on this dinosaur G1 but damn I want it back to CM5. Please continue with the help.
Click to expand...
Click to collapse
ok ummm wow you did a lot lol are you sure you did the flaskrec.apk thing right? so as of right now your phone is not rooted? and you are on 1.0? if thats the case you should get automatic updates and hopefully that could help you.. if not try downloading rom manager than flash the clockwork recovery.. personally i hate clockwork but if you can get that to work than i could help you get back to RA if you would like..
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
kl3vr said:
Well its a one-click solution, I must have missed the options... I installed it and ran the back up, but the "download" button was grayed out. was I supposed to do something with the entry field?
Rom Manager gives me "Application install unsuccessful" using AndExplorer and I think Clockwork gave me this problem in the first place back when I was using CM6.
Click to expand...
Click to collapse
I think Ezterry's post (#6) is your best option
you don't mention you have tried that
you will need to do some research into goldcards and finding the orange.nbh link
hint for the orange see threads started by ezterry (via his profile) look at the kernel for 2708 thread
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
kl3vr said:
Ok thanks, I'v got my gold card made but is safe to flash 1.33.200* SPL with 1.22.12.29 Radio? Isnt it a DangerSPL? Sorry if thats way off base.
Click to expand...
Click to collapse
for the record
1.33.2003 is compatible with 1.x and 2.x radios but will brick with 3.x
1.33.2005 is compatible with 2.x and 3.x radios but will brick with 1.x
so 1.33.200* is only compatible with 2.x
read Ezterry's 2708 post, the answers you seek are in it
sorry for delay lol but with the flashrec file wat you do is press backup than when your typing in the box you have to put exactly what your file says...
ex.. sdcard/recovery-RA-dream-v1.0.7-cyan.img (yours could be diff but make sure you type exactly what your file says that you placed on sd card) hope it helps
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
kl3vr said:
You guys are awesome, thank you everyone who was interested and especially ezterry, Effdee and Idrifta for the enduring help. I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio. Is it as simple as updating hboot to 1.33.2010 then flashing 3.22? Is it worth doing?
Again, sorry if that is way off base but this is the first week my phone has been usable in months, and I won't jeopardize it again.
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Recov: Cyan1.7
Rom: CM 5.0.8 - 2708 port
Thank you,
-kl3vr
Click to expand...
Click to collapse
hey no prob glad to help!! how did you end up fixing it? haha just curious
kl3vr said:
I'm now on CM5.0.8 2708+ and loving it.
Final issue, I'm wondering about going to EBI1 to get 3.22 radio.
Click to expand...
Click to collapse
Why ebi1 is equivalent to the old ebi0 and you loose the extra ram.
Thus unless there is a very specific reason it's a downgrade
kl3vr said:
New phone specs:
DREA PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA21000)
CPLD-4
RADIO-2.22.27.08
Click to expand...
Click to collapse
Best stay as is or upgrade the radio to 2.22.28.25.. As it has been distributed world wide. (Including to all locations 2.22.27.08 was previously distributed)
what did you do?
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
cacaface said:
I would like to know if you solved this issue as mine is similar. I DO have root though, but i have no recov/fastboot. I am using a dev phone though.
ps, grats on getting it working
Click to expand...
Click to collapse
If you flashed 0.95.0000 you are no longer using a dev phone (what do you see when you boot holding camera?)
The good news is that the ADP1 used the universal CID (11111111) and is thus not restricted to a particular carriers nbh file.. so you can probably just flash the orange nbh without the goldcard [just renamed DREAIMG.nbh on the root of your SDCard], then follow the 2708+ radio instructions.. or install 1.33.2003/5 via fastboot if you need the old radio.
The reason I'm pointing to the orange nbh is it will let you bypass the whole "I bricked my phone because I insisted on flashing death SPL via recovery" since you have an engineering SPL and 2.x radio after flashing that orange NBH from the 2708+ thread.
This is what worked for me, going from:
- a non responsive recovery
- OS locked at activation, so no usb debugging
- OS refused to root
- quadicolored fastboot screen that wouldnt recognize usb
To CM5 2708+ with RA-cyan1.7.
Before this thread I had to use this to get post the verizon data plan only activation to enable usb debugging.
Made a goldcard
Put the orange nbh renamed to DREAIMG.nbh (can't remember where i got it from, just searched) on the goldcard, Booted with camera+power to get fastboot, and applied the update.
Followed ezterry's post and at step 5 flipped over to this post on CM5 2708+
Now I'm gonna update the radio using exterry's advanced zips. Thanks again everyone, another successful thread.