[SOLVED]SPL help - G1 Q&A, Help & Troubleshooting

Hello all,
I have a rooted G1, CM 4.0.2, PVT 32B, and Radio-2.22.19.26I
--First of all I have read this thread."http://forum.xda-developers.com/showthread.php?t=548924".... How do I find my current SPL?
--Primarily-I would like to know why/if I should flash the Danger SPL. What benefits will it give me?
--Also, that thread I posted explains how to flash the radio, spl and CM mod.
Do I need to do all three things just to get the updated SPL?
--If I just want to flash the SPL. I think I just need to DL the "spl-signed" zip file and rename it "update" and flash it.
If I am wrong could someone please link me to a tut or explain how to flash the SPL only?
Thank you.

rakjer said:
Hello all,
I have a rooted G1, CM 4.0.2, PVT 32B, and Radio-2.22.19.26I
--First of all I have read this thread."http://forum.xda-developers.com/showthread.php?t=548924".... How do I find my current SPL?
--Primarily-I would like to know why/if I should flash the Danger SPL. What benefits will it give me?
--Also, that thread I posted explains how to flash the radio, spl and CM mod.
Do I need to do all three things just to get the updated SPL?
--If I just want to flash the SPL. I think I just need to DL the "spl-signed" zip file and rename it "update" and flash it.
If I am wrong could someone please link me to a tut or explain how to flash the SPL only?
Thank you.
Click to expand...
Click to collapse
As long as you got the newest radio (which you do) just update.zip and update. The "danger" spl will free up more space on your phone allowing you to install the hero roms. If you decide to do the new spl then be prepared once you flash it you will be stuck on the g1 screen. All you got to do is load a new rom and you'll be back to normal.

Thanks for the reply.
supremeteam256 said:
If you decide to do the new spl then be prepared once you flash it you will be stuck on the g1 screen. All you got to do is load a new rom and you'll be back to normal.
Click to expand...
Click to collapse
So when I am stuck, how do I reboot to load a rom? Do I remove the battery?

rakjer said:
Thanks for the reply.
So when I am stuck, how do I reboot to load a rom? Do I remove the battery?
Click to expand...
Click to collapse
Just before you flash the new spl put the rom you want to use on the sd card, then boot into recovery and flash. Remember if you use the new recovery you don't have to rename to update.zip.

Thanks for your help!
It Worked!!!

Cool no problem. If you don't mind put [SOLVED] in front of your thread.

spl info ?
Hi,
while this thread is on the go may i ask anyone if they can tell me how to display the currently installed SPL ?
is there a command that shows this info ??? is there another method ???
and am i correct to assume that as i have 90-MEG total on my G1 that i must have the latest SPL ??
i was so careless not making a note of which spl i used during the root method !
(( thanks DEVs ))

terminal 7 said:
Hi,
while this thread is on the go may i ask anyone if they can tell me how to display the currently installed SPL ?
is there a command that shows this info ??? is there another method ???
and am i correct to assume that as i have 90-MEG total on my G1 that i must have the latest SPL ??
i was so careless not making a note of which spl i used during the root method !
(( thanks DEVs ))
Click to expand...
Click to collapse
To check, boot in to the SPL by holder camera and power when the phone is off. The version should be at the top of ths screen. A rainbow coloured screen means the SPL is stock.

spl info ?
THANKS...
i see three skater androids,, ..
i remember now, lord i must have been asleep when i did my root !
thanks for the reminder, now i can move on to the issue that made me ask the question in the first place,
anyway thats another thread,
[SOLVED] ... for me at least ....

Related

Question about updating radio and SPL

Right now I am running Cyanogen 3.6.5 with the radio and SPL that have not been updated for a while (they are not the latest ones for sure).
Anyway in case I want to try out a Hero rom I want to update the radio and SPL, can I just update those with my current rom without having to reflash the rom?
I haven't touched my SPL, but I can tell you the radio is easy. Same as any flash - rename to update.zip and drop it on the sdcard. Reboot to recovery and flash. ROM will be fine.
Go to Settings > About phone
Check the Baseband version -- If it ends with .26I you have the latest.
I do know, when flashing the "DangerSPL" for Hero builds, you need to boot into fastboot mode (Camera+Power) and look for the text "PVT" in the first line on the rainbow screen. If you don't see PVT, you have the revision that bricks when flashed to DangerSPL
gecko666 said:
Right now I am running Cyanogen 3.6.5 with the radio and SPL that have not been updated for a while (they are not the latest ones for sure).
Anyway in case I want to try out a Hero rom I want to update the radio and SPL, can I just update those with my current rom without having to reflash the rom?
Click to expand...
Click to collapse
When you flash the new SPL you will have to reflash your rom because the SPL will overwrite your rom.
supremeteam256 said:
When you flash the new SPL you will have to reflash your rom because the SPL will overwrite your rom.
Click to expand...
Click to collapse
Ok I kinda understand that part but if after flashing the radio and SPL I flash the same rom (Cyanogen 3.6.5) again without wiping will all my settings and apps remain as they were before the update?
gecko666 said:
Ok I kinda understand that part but if after flashing the radio and SPL I flash the same rom (Cyanogen 3.6.5) again without wiping will all my settings and apps remain as they were before the update?
Click to expand...
Click to collapse
Use the method in post #3 from here http://forum.xda-developers.com/showthread.php?t=517593 it worked perfectly for me and yes your settings and apps remain the same.
One last question before I do this. I went into settings as well as checked at the fastboot screen and seems like I have the latest radio already and from what I read on this topic I should NOT reflash it right? About the SPL though how can I check what version I have? And if I already have the latest one and flash it again will I end up with a brick? Thanks everyone for your help.
gecko666 said:
One last question before I do this. I went into settings as well as checked at the fastboot screen and seems like I have the latest radio already and from what I read on this topic I should NOT reflash it right? About the SPL though how can I check what version I have? And if I already have the latest one and flash it again will I end up with a brick? Thanks everyone for your help.
Click to expand...
Click to collapse
Don't flash Radio again if you have the latest. (2.22.19.26I) Power off your phone then hold the Camera button down and press the On button (red button) you should see a white screen with 3 lil' Androids on skateboards, up top it should say DREAM PVT (32B ENG S-OFF) <---might be different but second lines shows your SPL, for example mine is HBOOT-1.33.2005 (DREA10000) and if you have the latest SPL then don't flash it again your good to go. One more thing MAKE SURE IT SAYS (PVT) AND MAKE SURE YOU FLASH RADIO BEFORE FLASHING SPL IF BOTH UPDATES ARE NEEDED! Can't stress this enough because if you do this wrong you'll definitely get a Brick.
Cool thanks. I do have PVT and the latest radio, guess it's just the SPL. Thanks again for your help.

URGENT: flashing back to stock for warrenty - all gone wrong

hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!
m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..
ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it
My god, I was feeling your anguish while reading this topic until the end...
Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo

SPL ??

how do you find out what spl you have ?
can someone breifly explain to me what SPL is
and i right in thinking SPL is what can make a brick ?
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Downgrade to Hard SPL from Danger SPL??
AdrianK said:
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Click to expand...
Click to collapse
When I rooted my phone I installed Haykuro's danger spl with the latest radio. I didn't know it can potentially brick your phone (hence the danger part lol). I'm running cyanogen 4.0.1 and it's working just fine so far but I had 3 questions
1) Is Hykuro's Danger SPL only risky during the installation process or can it still possibly brick your phone after a successful installation (in other words, elaborate on the "danger" part please)
2) Can I downgrade to Hard SPL after installing the Danger SPL
3) How would I downgrade to Hard SPL?
Thanks guys!!!
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
rondey- said:
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Click to expand...
Click to collapse
AdrianK said:
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
Click to expand...
Click to collapse
Thank you guys! In that case I'll just keep H's SPL seeing that I already installed it successfully without bricking my phone (yay)
Really appreciate both of your time!
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Unless you are Unrooting and flash the original spl. I've done this many times so I know it works.
Does SPL: 1.33.2005 help the regular ROMS run better (Cyanogen's)?
I use dxTop, seems to run out of memory quickly.
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Thanks for the warning!
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
sasa3791 said:
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
Click to expand...
Click to collapse
If you didn't downgrade to RC29/7 then you should have the 1.5 radio. Check by going to Settings > About Phone and baseband version. It should be 2.22.19.26I.
I think you can just flash HardSPL as update.zip as you are, but I' not completely sure...
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I swear I've heard people say they have, but dowgrading the radio after installing Danger SPL did cause bricks...
I'll go check
You WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL or if you do not have the latest radio installed before flashing the new SPL
Click to expand...
Click to collapse
Hmm can't find anyone that said they did :-(
FYI
FYI
@Adrian K and nephron
When I unrooted my spare G1, I got it completely back to stock (circa October original shipment stock)
I downgraded my SPL successfully from the danger SPL all the way back to the original SPL. Also when I downgraded back DREAIMG.nbh, I confirmed at the time that the radio downgraded with it. My original post was on the unlockr.com when I was trying to help David of unlockr.com with some tutorials.
My original quote from unlockr
BTW: I have confirmed via the bootloader that the radio DOWNGRADES back to stock by applying the DREAIMG.nbh update FYI
From the bootloader I am now at
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Click to expand...
Click to collapse
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I think it's downgrading the Radio, while on Danger SPL that will brick your phone b.
I have also gone from Hard to Danger back to Hard again with no issues.
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
polarbearmc said:
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
Click to expand...
Click to collapse
If you are talking about the one click method that is know on the market as recovery flasher, that only takes care of granting root access and flashing cyanogen's recovery image. The radio and spl upgrades are on you.
Try here for more explanation
http://forum.xda-developers.com/showthread.php?t=550050
yea that's what i'm talking about... now don't get me wrong, i believe you guys here on xda first and foremost... but theres a video tutorial on android and me, and it doesn't show them installing the radio and spl between using the recovery flasher and then installing cyanogens 4.0.1... are they not doing it right in the video or are the radio and spl optional? all the guides on here seem to say you do have to flash them but the video clearly shows them not stopping to do it. so maybe their video just sucks haha. but any idea on that?
thanks so much
I have 1 click rooted and installed Cyanogen 4.01, I am on CRC1, my understanding was as I was already on 1.5 Cupcake, my current SPL and Radio were current.
I read somewhere that the 1 click method is only temporary root. But if someone could elaborate on this it would be very helpful. Also what is this hard spl ?

questions for updating radio

xda community,
sorry if it dosent belong here but if anything move it or lock it but really need help....
i received a replacement phone from tmobile with the radio 2.22.19.261 and that is the radio update we need...well i bricked 1 phone because i tried doing this and didnt notice that it had already the radio......what im concerned about is if i should skip the update radio step and just install the spl???? please some feedback would be greatly appreciated and once again sorry if it dosent belong here.
plz and thank you
the 2.22.26I is the radio that is needed to flash the 1.33.2005 spl. also make sure phone is a pvt instead of dvt by booting the phone into bootloader (camera and power) and find out on that screen. if you have both of those then the 1.33.2005 *should* (being the keyword) flash without problems.
it is a PVT board so you are suggesting i just flash the spl since the radio already came with the phone?
djcookiedj said:
it is a PVT board so you are suggesting i just flash the spl since the radio already came with the phone?
Click to expand...
Click to collapse
if you want to be on the really safe side, then you should flash the radio first
i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone
djcookiedj said:
i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone
Click to expand...
Click to collapse
if you have any doubts then if i was you, i would flash the radio first just to make sure.
djcookiedj said:
i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone
Click to expand...
Click to collapse
You should flash the Radio haykuro posted. I did just to be safe. I believe i saw one person brick even though he had the 26I radio, but i dont think he knew what he was doing.
if your gonna flash the .2005 spl, you might as well be extra safe and flash the radio. its only a few minutes more
quick update :
i went ahead and prayed that this went well.....since my g1 was pre-shipped with the newest RADIO version in an older g1 that had the newest radio i tried applying the Radio update and it bricked.....so this time i went ahead and (thanxz for the feedback) just flashed the SPL and VOILA !!! now i am testing the hero ROMs and BLUR rom.....thanks guys
djcookiedj said:
quick update :
i went ahead and prayed that this went well.....since my g1 was pre-shipped with the newest RADIO version in an older g1 that had the newest radio i tried applying the Radio update and it bricked.....so this time i went ahead and (thanxz for the feedback) just flashed the SPL and VOILA !!! now i am testing the hero ROMs and BLUR rom.....thanks guys
Click to expand...
Click to collapse
your welcome, glad that your phone is still booting and flashing strong
update radio
I wanted to update the radio pls send the link or step by step how to upgrade radio cause i try in the forum and i found a difference methode .... there's nbh, ota,... i didn't understand ... pls make a simple link and how to
thanks

[Q] How to downgrade SPL/HBOOT from 1.33.0013d to stock SPL or to 1.33.2005?

first of all, i'd like to say sorry for this stupid question.
im searching via google everything about downgrading 0013d SPL to 1.33.2005 SPL and found nothing.
so if u guys knows how to downgrade this "perfected" SPL,
please,
post it here..
I really need some guidance..
Thanks before..
Regards,
Brokenval
You should read in ezTerry's original post, there is written everything ...
(A link can be found in my signature)
AndDiSa said:
You should read in ezTerry's original post, there is written everything ...
(A link can be found in my signature)
Click to expand...
Click to collapse
letme make it clear, got some spinning bird above my head
so, after installing this 0013d SPL,
in case if i want to go back to my previous SPL (1.33.2005),
i should do this:
Dream
1) Download: orange-1.58.73.2.nbh (MD5: aca4dee0c1ece7e9773f2ecbdfbba7c0) (mirror)
2) enter fastboot and run 'fastboot flash nbh orange-1.58.73.2.nbh'
3) wait for the entire nbh to flash
4) boot into the bootloader again (it will be an engineering SPL 1.42.2000)
5) You can now re-flash the radio/hboot/recovery via fastboot that you wish to have installed.
So, wat ive got is, after flashing orange thing, now i have SPL 1.42.2000? not 1.33.0013d? So from this orange SPL i can flash radio then spl back to dangerSPL combo again?
btw im indonesian, well id like to ask u if u know ,about wats the best radio for 0013d in my area?
btw thanks a lot..
Yes, exactly, that's the procedure. A bit long way, but secure, because you are using only fastboot, no need top flash SPL and/or Radio through recovery.
About the radio in Indonesia, I don't know what's best, but as far as I know there shouldn't be any differences for different countries.
AndDiSa said:
Yes, exactly, that's the procedure. A bit long way, but secure, because you are using only fastboot, no need top flash SPL and/or Radio through recovery.
About the radio in Indonesia, I don't know what's best, but as far as I know there shouldn't be any differences for different countries.
Click to expand...
Click to collapse
NICE!!!
Thanks a lot.. ure so QUICK and FAST REPLYING!!
downloading orangeimg now..
preparing for failsafe system
btw, could u tell me wat rom i should use since in the bible there are som roms that doesnt hav overall score..
battery lifetime is the 1st one then speed then stable..
First, why do u want to downgrade? Ur current spl can gv u extra ram
For battery life and stability, I would recommend ezterry's AOSP for froyo(2.2), if u wanna try gingerbread (2.3) roms, go for AndDiSa magpie, check his signature
Gingerbread roms are not fully finished yet but they are very stable
Orang ckp radio 2708 tu elok pakai kat US, luar US elok pakai yang 2825
Sent from my HTC Dream using XDA Premium App

Categories

Resources