My G1 boots straight into the rainbow screen, then the grey screen comes up and says not allowed, and switches back to the rainbow screen again. it wont do anything else. is there any ways i can get it back to normal?
thats really a lot of help for us. is your phone rooted? where you trying to root it? is your camera button stuck? What all have you tried to solve this?
i was trying to root it.. I tried to run the dreamimg.imf file and after it got throught the install the radio check came up fail and it failed the update, and hasnt allowed me to move out of the program since.
SammyBoy2k1 said:
i was trying to root it.. I tried to run the dreamimg.imf file and after it got throught the install the radio check came up fail and it failed the update, and hasnt allowed me to move out of the program since.
Click to expand...
Click to collapse
i have never heard of a dreamimg.imf file. are you sure you don't mean DREAIMG.nbh? what part of the world are you in? is your sdcard formatted to fat32?
yes thats the one i meant. sorry. im in the uk, and my sd card is fat32 yes.
is it the only file on your sdcard and is it explicitly named DREAIMG.nbh? also did you grab the rc-7 file from this thread?
I am having the exact same issue. I am currently on RC7 but somehow last night I redownloaded the incorrect version and it ended up to be RC29 and it worked?
I am really confused because I went wrong somewhere along the steps and I didnt transfer the update.zip so I can create the EXT3/swap so everytime I booted up it saysed on the Tmobile G1 loading screen so I had to start again.
RC29 only seems to work for me, RC7 is total ballache trying to get root.
I really woudl liek some help, I dont wnat to be defeated.
huh?
Your post confused me brad, so are you using rc29 or rc7, can you get into the recovery console, have you booted up, where are you stuck at, need more information and a little bit clearer
gridlock32404 said:
Your post confused me brad, so are you using rc29 or rc7, can you get into the recovery console, have you booted up, where are you stuck at, need more information and a little bit clearer
Click to expand...
Click to collapse
My first few attempts have been with RC7. Here is where I get with RC7 - I type telnetd into terminal emulator and then telnet from my windows PC (connected to my router an dusing local IP) and run the commands such as mount -o remount r,w etc etc. I complete these steps and then try to a SU command. When I do this it then says permission denied.
Now, I tried to flash to RC29 and tried the above again, it worked but I missed a step through it being late and loosing concentration so I reflashed back to RC7 and then tried to flash to RC29. When I try to reflash to RC29 it says error.
I have no idea how I got RC29 to work before but it doesn't work now? :S
Hmmm, try downloading telnet from market and then use telnet from your phone, type telnetd on your home screen than open up telnet and follow the directions from there or let your phone get the over the air updates and then do the step rooting once it is up to date. If you are in the uk than rc29 should have not loaded for you, I might be wrong but why would there be 2 different versions then. But in any case you might have missed a step in your rooting process so give it a shot and try again. You will have root in terminal if you see a # when you type su and hit enter. Once you reboot your phone you will lose root so make sure you get a recovery image in there when you have it
After I reread your first post I have a ? Are you opening the term emu and typing telnetd into that or are you typing it on your home screen where it will pop up a contact search, u need to do it on your home screen
gridlock32404 said:
After I reread your first post I have a ? Are you opening the term emu and typing telnetd into that or are you typing it on your home screen where it will pop up a contact search, u need to do it on your home screen
Click to expand...
Click to collapse
Im typing it in terminal. This should have the same effect?
I will try again tonight (8th-9th time) once I get home but the icons are so different compared to the RC29 and RC7.
There are so many videos which are US and use RC29 and none which use RC7 so I cannot compare my phone to theres. On RC29 you get the black and white logo on start up but on RC7 you get the glossy G1 with the purple tmobile logo. WHich may suggest that the RC7 is protected from being jail breaked?
I guess there is an RC6 or lower which I could try?
ALL I WANT IS HERO LOL!!
Cheers guys
Rc7 is the lowest image you can get, rc29 is the same thing almost but they have different radio images which is why u need rc7, u must type telnetd on the home screen because the orignal version of android had a security loop hole which has given us root in the first place where everything you typed on the phone would also repeat it self in telnet, by typing telnet d you are telling the system to give u acess when you open up telnet, once you get acess in telnet then you can use term emu to flash the recovery image
Thanks for your help.
I press enter twice then type telnetd. I am connected to my works WiFi. I go onto a telnet app and connect to localhost and port 23. I says there is an error connecting to 127.0.0.1? I have tried the local IP too and it says connection refused.
Thanks
I am gonna make it real easy for you, in this thread there is a guy who has a link in his sig for my step root, click on it and follow the instructions, the link to the apk is in that link to another guide, let your phone sit for the day and wait till it gives you the option to update ota after you get that you will be back up to the newest software including the newest radio, after you get that than follow the one step, yes it does work I just tried it, it will flash a recovery image onto your phone and from there you can flash a rooted rom and also the danger spl and call it a day and you will be good to go, and you can do it from your work's wi-fi, if you are impatient and don't want to wait for the updates than you can just download a radio image from link inside a hero rom thread and do it that way just make sure that you have the radio image flashed on your phone before the spl or you will brick
my problem is, i can get in to my sd card to check what files are on there, or put anything different on, because it boots straight into that rainbow screen and stays there, checks my sd card for the DREAIMG.nbh and then says "not allow" and goes back to the rainbow screen. i assume the only way to fix this would be to have a card reader?
when you pull battery and boot it goes to bootloader?
yup. cant gwt out of it.
Related
I want to root my t-mobile g1 with a build number crc1. I ve. Done the latest update. Anyhelp would be grately sppreciated. :=)
I had build version 123099 and received an OTA update and now my build version is CRC1 also... how do I root the phone? Is is in the same way as http://www.quantumcon.com/Home/g1-unlocking/downgrading-continental-european-android-devices ?
yes i am wondering the same thing? Been looking all over still no sense has been made. Anyone?
see my thread on CRC 1
see my thread on CRC1 in the ROM dev section.
http://forum.xda-developers.com/showthread.php?t=538456
~cheers~
enomther said:
Preferred Installation Procedure (Tested, Tried and True)!
Prerequisites
1) Root.
2) Recovery image capable of flashing ROM's not signed with OTA-release-keys, I recommend Cyanogen's 1.3.1 image.
Click to expand...
Click to collapse
I've downloaded a few different R7 image files, I've tried them on both a freshly formatted sdcard, and a htc goldcard, but I always get 'no image file' after hitting camera+power.
Is it actually possible to get root this way on this build, or am I doing something wrong?
more info:
Firmware version:1.5
Baseband version: 62.50S.20.17U_2.22.19.261
Kernel version: 2.6.72-00393-g6607506
[email protected] #1
Build number: CRC1
T-Mobile UK
Update: I have root
I formatted my sdcard with the command
Code:
format F: /FS:FAT32 /A:4096
from a cmd window in xp
as suggested in http://forum.xda-developers.com/showthread.php?t=485364
seems clicking format didn't cut the mustard.
Rooting CRC1 is the same as rooting any other build, the crc1 update didnt effect the rooting process for phones that didnt have root - Adam
my thread on this was here:
http://forum.xda-developers.com/showthread.php?t=540920
ruin said:
Update: I have root
I formatted my sdcard with the command
Code:
format F: /FS:FAT32 /A:4096
from a cmd window in xp
as suggested in http://forum.xda-developers.com/showthread.php?t=485364
seems clicking format didn't cut the mustard.
Click to expand...
Click to collapse
Hi!
Can you help me do same? i really don't understand how i can rooted my phone. I have too T-Mobile UK with CRC1 and firmware 1.5
Can you not just format your SD card to FAT32, load the DREAIMG.nbh, and flash through bootloader on CRC1 phones?
I rooted my sisters G1 crc1. just downgrade and follow the instructions to root, for US i believe its RC33 and UK is RC9. just follow the rooting instructions nothing special. downgrade first then root.
Bzerk1 said:
I rooted my sisters G1 crc1. just downgrade and follow the instructions to root, for US i believe its RC33 and UK is RC9. just follow the rooting instructions nothing special. downgrade first then root.
Click to expand...
Click to collapse
So i first format my sdcard to fat32 and then how i downgrade? because i try downgrade using to RC7, but it doesn't work...that downgrade is that thing, what i don't understand now how that doing. So, i have UK T-Mobile phone
teucca81 said:
So i first format my sdcard to fat32 and then how i downgrade? because i try downgrade using to RC7, but it doesn't work...that downgrade is that thing, what i don't understand now how that doing. So, i have UK T-Mobile phone
Click to expand...
Click to collapse
So your SD card is formatted to FAT32 and not FAT? Did you place the DREAIMG.nbh file onto your SD card and start up your phone holding CAMERA+POWER?
ThR1LL said:
So your SD card is formatted to FAT32 and not FAT? Did you place the DREAIMG.nbh file onto your SD card and start up your phone holding CAMERA+POWER?
Click to expand...
Click to collapse
I must check and do format again because i maybe use only fat. But i ask again, if i come problem to downgrading. But what do think, have i must use RC29 or RC7?
teucca81 said:
I must check and do format again because i maybe use only fat. But i ask again, if i come problem to downgrading. But what do think, have i must use RC29 or RC7?
Click to expand...
Click to collapse
RC7 since you have TMobile UK
teucca81 said:
I must check and do format again because i maybe use only fat. But i ask again, if i come problem to downgrading. But what do think, have i must use RC29 or RC7?
Click to expand...
Click to collapse
Okay, it's my mistake, now i get inside RC7 stuff, but now i have new problem. so, i try root using this help http://forum.xda-developers.com/showthread.php?t=442480 and now i have big problem thing "Rooting your RC29 or lower phone:" and stage 5 "After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)" <<<--- -that thing i really don't understan. I try press first, home screen several times enter and then i write that "telnetd" and enter, but nothing happening...??!? so what i must do now? or what i do wrong?
teucca81 said:
Okay, it's my mistake, now i get inside RC7 stuff, but now i have new problem. so, i try root using this help http://forum.xda-developers.com/showthread.php?t=442480 and now i have big problem thing "Rooting your RC29 or lower phone:" and stage 5 "After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)" <<<--- -that thing i really don't understan. I try press first, home screen several times enter and then i write that "telnetd" and enter, but nothing happening...??!? so what i must do now? or what i do wrong?
Click to expand...
Click to collapse
did you hit enter twice?
it should still work though
^^ yeah, nothing happens when you press enter twice... just do it like the instruction says and type in telnetd
hey guys i'm trying to root my phone first time
i have updated to CRC1, firmware 1.5, Germany T-mobile
i've moved DREAIMG.NBH to sd card and then turn off my phone. Then i hold camera button and press power button to entry bootloader mode and i got the message checking...loading....and then "not allow"
where's the problem,
here is spec:
DREA110 PVT 32B
HBOOT-0.96.0000
CPLD-4
RADIO-2.22.19.26I
whats the next, can u help me?
Hello everyone,
I have a rooted g1 and I was putting on the 2.1 rom on my phone. I was following a guys instruction off of youtube but it totally messed my phone up. Now its stuck on the pitcure with the open box pointing a yellow arrow on the phone right next to it(the update screen), what do I do??? Thanks for your help.
You dont even have root then...If it shows what i think your taking about....You should follow this simple enough my little brother(7yr) could master it:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Sagz326 said:
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Click to expand...
Click to collapse
If you had root why did you flash the radio again?
That gives bricks applying radio after having root is pointless.
What are you trying to do?
i dont know im a noob if you dont know by know. well is there anything i can do???
Sagz326 said:
i dont know im a noob if you dont know by know. well is there anything i can do???
Click to expand...
Click to collapse
Just tell me everything you did, step by step.
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Sagz326 said:
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Click to expand...
Click to collapse
radio and spl?'
But you have to have a custom recovery image before you can flash either of those.
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
yeah i have amonra
Sagz326 said:
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
Click to expand...
Click to collapse
Ahh you might brick, you seem to have flashed the Radio made for HTC hero not G1....Notice the title: "How to get Android 2.1 on HTC Hero"
To use Hero 2.1 on G1 it shows it here @ XDA, you only needed Haykuro SPL and the 26I radio/
If rec mode is working then you arent brick or if you can get into bootloader.
how do i get in rec mode or bootloader
Hold down home when turning on the phone=recovery
Hold down camera button while powering on= bootloader
If you can't get into either one of those, likely bricked. I know with WM devices flashing a radio for another phone is one of the fastest ways to brick your phone, Android seems to be much more forgiving, so hopefully you will be lucky and if recovery and bootloader don't work, you can possibly get ADB to work.
If you don't figure out how to do this BEFORE you do it, you will likely brick your phone, if not sooner, soon enough. Doing it along with a video isn't enough to make sure you won't brick your phone.
Read through the steps of rooting, flashing a basic, stock ROM, do that a time or two, and then get into the more up-to-date stuff.
Your method of going about a new task is going to... well, it isn't going to work, unless you are really, really lucky.
Hi,
I got a G1 Root/mod with DREAIMG-RC29, it was working with all functions, then I was trying to put SuperD 1.8
As did this:
1.Flash Radio (2.22.19.26I Baseband Version: 62.50S.20.17H_2.22.19.26I)
2.Flash SPL (1.33.2005)
agreed this tutorial forum.xda-developers.com/showthread.php?t=613809
3. Then I format my 8Gb midroSd as quoted in (androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/)
4. when I was flashing the new rom(SuperD18-blk), I did it as usual: change name from "SuperD18-blk.zip" to "update.zip", power off, power+home, alt+w, alt+s.
5. An error came up, something like error in line 59, something with E:/ bla bla, or something, i didn't read it 'cuz suddenly the phone restart itself.
After this I can't go to console or recovery mode.
I tried:
-Home+power to go to recovery mode.
-Home+camera button with RC29 on re-formated FAT32 SD card.
-Go to recovery trough abdshell, but my computer doesn't recognize the device so is not possible to get into the phone via PC.
Now the G1 is in the same situation: T-mobile G1 screen, so, I want to know if there is something that I can do to recover this or, maybe other way to roll back to RC29.
I'll appreciate any help, is sad to get stucked between the heaven and hell!!!!!!! The bad thing is that I don't got any log!!!
Cheers..... Alecks
Use fastboot with an old nandroid backup
RC29 includes an old radio image not compatible with 1.33.2005 SPL. If you had 1.33.2005 on the phone and reflashed RC29 when your update failed, the phone is most likely bricked.
dude most likely you are in deep dookey although there is probably still a chance if you can see the Tmobile G1 Screen.
dont be too scared just....dig a hole in the ground...just in case lol jk
Macrophage001 said:
dude most likely you are in deep dookey although there is probably still a chance if you can see the Tmobile G1 Screen.
dont be too scared just....dig a hole in the ground...just in case lol jk
Click to expand...
Click to collapse
Wrong, if all he can see is the G1 screen, he is bricked.
Welcome to the " I Bricked my G1 Club"
Say hello to your brand spanking new paper weight, pretty ain't it?
Tis a harsh world in which we live.
Seems to be a hopeless case!!!!
I will keep working on the G1, earning money for the nexus maybe!!!!
JAguirre1231 said:
Wrong, if all he can see is the G1 screen, he is bricked.
Click to expand...
Click to collapse
Is there any way to push the files into the phone with Eclipse? I got it even SDK, but I don't know how to do it exactly. The main issue is that the phone is not recognized by my PC currently, I think I have to perform some steps.. any idea?
So I purchased an HTC Dream from a friend and learned all about the wonders of rooting, and found what i thought was going to be a simple step by step guide to upgrade my phone to android 2.1, and was encouraged to use it after reading all the positive comments. I can't post the link to it as I'm a new user, but you can find it by entering "guide on how to root your htc dream to 2.1" into google, the article is on adroidheadlines.com...
I followed it step by step until I got to step 20. After entering:
adb reboot bootloader
i got "error: closed." Being stupid, I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems. Unfortunately for me I did, and then used fastboot which i (think) flashed that rom (i think that's the right lingo, anyway) To my surprise, I turned on my phone to see "T-Mobile G1" on my screen as opposed to the regular "ROGERS" logo. My phone won't move past that screen and won't even boot into recovery or fastboot. I have this gut feeling i've bricked the damn thing and am looking for someone to tell me it isn't so. To clarify, I'm wondering if there is anyone to factory reset the phone or restore it to its original rom somehow while its in this state.
Any help at all would be appreciated, and i can't seem to find anyone else on the internet stupid enough to have made the same mistake, which is never, ever a good sign.
i think you grab the wrong Dreaimg, there is 2 different ones if im not mistaken.. have you tried turning off phone hold camera then power?
If you can get in there then you can use this guide
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Rogers_Dream_EBI1
These are the instructions you should have followed for Rogers..
The op was actively rooting the dream (just using a clone of the instructions with a typo) 'adb reboot bootloader' instead of 'adb shell reboot bootloader'
The wiki page has this correct, the comment on the article the op read indicates the correct one and comments in the thread on XDA indicate if you are stuck all we where trying to do was enter fastboot..
Unable to find any of what I just mentioned op left the guides for rogers dreams and switched to T-Mobile Howtos and got a t-mobile nbh, having already installed danger SPL it could be flashed.
80% of the time this would have left the user with RC29, however 20% of the time system fails to flash correctly, and you need to flash it again. This is made harder since now you have the rainbow SPL (no fastboot and security locked) 1.x radio, and a Rogers CID. Thus need a gold card.
There are many nbh files however; one with the rogers CID can be flashed without a gold card.
http://www.rogers.com/dream-zip
has the current 911 patched nbh file (unzip it).. that will let you start again, but do note nothing went wrong the first time so don't enter and endless loop please.
(Note I recommend you apply it twice to ensure all partitions are flashed correctly, rogers has the partitions layout of dangerSPL, not t-mobile stock SPLs)
Okay, I understand what I did wrong, and I understand how I WOULD flash the file you provided using fastboot, except that my computer no longer recognises my phone when I connect it, and as a result I can't access the phone using adb... Not sure what to do next. Would placing that file on the sd card using an sd reader change anything? Or is that what you meant for me to do?
EDIT: Nevermind, I figured out what I was supposed to do with that file, though the problem remains that my computer no longer recognizes my phone when I connect it via USB. Is this hopeless?
EDIT (again) I tried holding camera while powering up, before it didn't do anything but now the phone has booted to a screen with 4 horizontal coloured bars. the screen reads
"DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO- 1.22.12.29
Sep2 2008
Serial0"
Not sure if that means anything but I figure it could. Please advise.
weezerx said:
I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems.
Click to expand...
Click to collapse
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
ezterry said:
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
Click to expand...
Click to collapse
I really appreciate the help but I'm very new at this and I'm not entirely sure of what it is you're asking me to do
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
weezerx said:
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
Click to expand...
Click to collapse
And power on while holding camera it ought to ask you if you want to flash it..
Well I followed all of the instructions and removed the bad image from the sd card and put on the one you provided, turned on the phone, attempted to flash it, and got to a screen that says "Update terminate UPDATE FAIL" ... ideas?
Remove sdcard, boot holding camera, tell me all the text at the top of the screen
"DREA210 PVT 32B RUUNBH
HBOOT - 0.95.0000
CPLD - 4
RADIO - 1.22.12.29
Sep2 2008
Serial0"
Interestingly enough, when I boot to that screen now (despite having no sd card in the phone anymore) it still switches to the screen it tried to update with before (light blue background, darker blue text) for a split second before switching back... it never did that before, I'm not sure if that means anything.
Again, I really appreciate all the help though I'm starting to consider sending it to someone for JTAG if we can't find a solution
Hem I think rc29 on a gold card will make your phone into a T-Mobile dream that can be rooted with the telnet method.. remember you will have a 1.x radio so you will not want to directly install danger spl.
The big trick IS unless you have another HTC phone making the goldcard
I'm nt sure what you mean by all of that I tried backing up the fles on the sd card and only putting that nbh file on the card and that didnt work. I tried putting it on with all of the other files that were on it before in place of the other nbh that screwed up the phone in the first place... unsure what to do next. Was i supposed to put the "HTC update" file on the sd card without unzipping it? :S I'm so lost. ezterry, you're from toronto and do jtag service right? cause I'm not too far away...
Okay so scrap everything I said before. I decided to investigate the whole goldcard thing and to me it sounds like it's my best bet. I have a buddy who's willing to let me use his HTC Magic to complete the process. I found a guide online here
http://www.droid-den.com/android-guides/android-guide-how-to-create-a-gold-card
It sounds easy enough to follow, but I have a few questions. First, does the app "GoldCard Helper" still exist, because i know google has taken apps off the market before. Secondly, would you recommend this method/ have any advice or maybe a different way of doing things? and thirdly, just using my friends phone to get the CID for the sd card doesn't pose any threat to it at all, right?
(Rogers HTC Dream)
Ok, so, i know this sounds ridiculous, and you may find yourself asking "WTF Was He Thinking?!?!?" But, was a late night, and i was quite possibly half asleep lol...
Ok, so, long story short, i have tried possibly every rom for the Rogers Dream, and majority of them didn't work for me, or atleast, if they did, not that well.... Cyanogenmod 6 worked ok, although it started to get slow pretty fast :/ Anyways, i had previously rooted and flashed my dream with the steps provided on cyanogen's wiki, but i had never updated the kernel or anything, so, i came to the conclusion that it was possibly my kernel that was un-allowing me to run most roms, so i decided to update my kernel using the steps here
"http://forum.xda-developers.com/showthread.php?t=831139"
Everything went well, kernel updated, wiped everything, except i accidently deleted my recovery.....but thought, no problem, i'll just follow the instructions on the thread, no biggie.....it said to download the "orange-1.58.73.2.nbh" and flash that......BUT... I Should have known that the Orange one was the one for T-Mobile!! But out of stupidity i didn't realize it and flashed it!! Now my phone won't boot up or Anything :/ when i try to boot into recovery OR Hboot, it shows the t-mobile startup flash, then shows an error with a triangle and a yellow exclamation in the middle, with a phone on it's side beside it!! :S
Did i completely mess up my phone?.... Someone please help!! x.x
I got a Rogers dream and I just push amonRA with adb. As for the exclamation screen, I think there is a key combo to bypass it. Something like volume up and power at the same time. I can't remember now the exact combination. Took a lot of Googling to find it, and if I remember correctly the dream has a different combo than the tmo did. But with this nexus one my memory has faded.
Sent from my Nexus One using Tapatalk
The orange nbh is orange not t-mob..
But has a eng spl so recovery is easy.. head over to my 2708+ radio thread and flash that, a 2708+ rom (most new roms support it and older ones the kernel in that thread will fix it.
Rogers if they are your carrier may cut wireless data there is a e911 wavier form to get around this search for it or ask the support person if they cut your data for detasils.
The good thing about using the 2708+ radio/kernel is extra ram, and it works on the rogers dream the same way as the non rogers dream thus you can ask more people to help support you with 2708+
Thanks for the reply guys,
ezterry:
thanks for replying, would had posted in your thread but didn't want to jam it full of even more posts of someone needing help lol...
as for your reply, it was after i had flashed the orange nbh that i was getting the t-mobile splash :S thus i assumed it was t-mobile.... but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck.....i tried using the usb cord to access adb through it, but on the comp it says there are no adb devices, i'm assuming it's because i can't get past the "no sim card" screen to enable debugging ..... Any suggestions?
Thanks!!
I'm going to hope you are doing something silly since your description indicates no problem with the phone.
SpawnOfSatan said:
but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned
Click to expand...
Click to collapse
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
SpawnOfSatan said:
, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck..
Click to expand...
Click to collapse
I don't recall if adb is enabled by default on the orange rom; regardless this is the rom. (putting a sim card active or not in the phone may let you get further however ought not be necessary )
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Powering on when holding 'camera' is supposed to always bring you to the HBOOT screen; then pressing send or back as prompted will let you to the Fastboot screen (don't re-flash the orange NBH, say no if it asks)
Alternatively either booting with send or back will go directly to HBOOT.. (The rogers [2000 series] dream uses Send while the t-mobile (100 series) users Back but some SPL only provide the back options regardless of dream model.. I don't recall about 1.42.2000 so you will want to try both)
In theory Home is the only button to send you to recovery.
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
Click to expand...
Click to collapse
Ahh ok lol, i'd installed RA recovery when i first got the phone, so it was the only recovery screen i remembered ever seeing, thus why i was confused, but yah, hit alt+L and saw the options, but yah, not that many :/
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Click to expand...
Click to collapse
Apparently was entering it wrong, i was used to using Home+Cam+End to enter hboot.....so that's my fault....
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
Click to expand...
Click to collapse
[/QUOTE]
When i enter hboot, it looks like a friggin rainbow now lol....red, green, blue, and white bars as the background :/ and once in hboot, it says "Serial0" in the middle of the screen :S and when i plug it into the computer, i tried hitting both back, and send, and it makes the "Serial0" dissapear, but seems no matter what i do, it won't show the phone as a connected device in fastboot :S
Thanks again for replying soo quickly and all the help u've been giving me, any advice on where to go from here or getting it to enter fastboot?
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
hey if you are still getting that screen with the yellow triangle and '!' that means you have stock tmobile recovery with no rom lol can you try to press (alt+L) hold alt and press L should make a list pop up.. if it does than maybe you can still re root it so than it will read your sim... but im not sure if the rogers G1 has and different software so it could possibly make it worse.. lol just a suggestion
ezterry said:
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
Click to expand...
Click to collapse
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
SpawnOfSatan said:
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
Click to expand...
Click to collapse
that sounds like stock 1.5 firmware to me
..Still have yet to find a solution....any help please?
info again is
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Background:
Accidently wiped rogers rom + flashed t-mobile rom, and since then,
Hboot says "Serial 0" and won't allow me to flash any images, phone doesnt have a recovery, will boot up now, but only to the android set-up process which i can't continue with because it won't accept my rogers sim card, despite the fact i unlocked the phone before all this happened :/ so i can't sign in to or create a google account. Have attempted every bypass to get past it with no success. Obviously since i can't get past it i have no access to adb...
Please help
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
BeenAndroidized said:
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
Click to expand...
Click to collapse
Thank you for your response, unfortunately i have tried that countless times with no luck it says it cannot read or flash or something, i forget what it says Exactly but it wouldn't allow it x.x any other suggestions?
I'm Really desperate x.x and i have been having the crappiest luck lately. I bought a phone off kijiji today, spent 3 hours trying to meet up with the guy to buy it, then when i did get it (after all the running around) i took it to "The Source" to get it activated in my name , and after 4 hours (5pm-9pm) they finally said they tried everything but couldn't do it because the phone is registered to someone with a contract that has a suspended account do to owing an outstanding amount of money!!
At this point, when you boot up the phone. What do you see?
BeenAndroidized said:
At this point, when you boot up the phone. What do you see?
Click to expand...
Click to collapse
It loads up to the setup screen, in which i cannot bypass...i have tried with another active (with data) rogers sim, telus sim, and virgin mobile sim card, but none of them will work....and like i previously mentioned, i unlocked the phone prior to all this happening :S
OK! I am not sure why it will not let you activate your phone. But don't worry about that ATM.
Let try activate your G1 over wifi. Follow the instruction from the link below.
http://theunlockr.com/2010/01/10/how-to-activate-the-g1-without-a-data-plan-or-sim-card/