Related
I just got a new g1 and i was rooting it but forgot to install the new spl before flashing a build so i flashed the build and got a "cant symlink" error.
After that i figured out it was the spl so i flashed the new spl and it installed fine but when it said press home+back to reboot i just took out the battery...
Now I have to tried to boot the phone into recovery with home+power and camera+power and it still just remains on the g1 screen!
Please help!
Cant SYMLINK
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.
WHAT YOU NEED TO DO IS LOAD ANOTHER ROM ON YOUR SD CARD, PULL THE BATTERY, GO INTO RECOVERY, WIPE, AND APPLY THE ROM! that is assuming you can get into recovery?
If you can't get into recovery sounds like another brick in the wall.
supremeteam256 said:
If you can't get into recovery sounds like another brick in the wall.
Click to expand...
Click to collapse
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]
DirectMatrix said:
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]
Click to expand...
Click to collapse
LOL. Good one
sounds like a brick
i just re-read what you wrote and yeah..sounds like a brick. spl's are tricky mo-fo's. maybe next time you will remember it goes RADIO, THEN NEW SPL?!
as3k said:
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.
Click to expand...
Click to collapse
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something
so do i
508bmartin said:
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something
Click to expand...
Click to collapse
you thought the best way to reboot your phone...was by pulling the battery? even though the recovery said reboot by pressing Home+Back keys to do it, which would be infinately easier? Have you ever "rebooted" your PC by pulling the power cord? nvm dont answer that....
I would suggest you stay the hell away from the spl until you understand wtf your doing.
rebooting PROPERLY would have allowed the image to be written properly.
EDIT: LOL wow nvm this is a thread brought back from the dead......
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
crusader0071 said:
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?.
Click to expand...
Click to collapse
Just use the top three wipes available in Anon's recovery menu: Wipe System/Data (1st), Davilk Cache (2nd), Ext Partition (3rd). If you haven't partitioned your SD card into FAT32, Ext2, 3, or 4 and Linux-Swap, do so now with the Recovery menu. You must backup your fat32 first, because a total repartition will totally blank your data. Good luck!
crusader0071 said:
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
Click to expand...
Click to collapse
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
thanks for trying to help but....
hi thanks for your help but ...
i have partitioned the card via anons recovery flasher, i have set my 8gb to 96mb swap , 1.5gb ext2 and the rest is used for fat32.
i have also gone throught the menu and deleted / erased the top 3 as requested but when i install a new rom it still freezes on the g1 welcome screen? please help!
G1ForFun said:
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
Click to expand...
Click to collapse
hi i just noticed im using Hard Spl update at the moment ? how do i update to Haykuro?
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
crusader0071 said:
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
Click to expand...
Click to collapse
This is YOUR FAULT for NOT READING!!!!
You installed an SPL meant for an HTC MAGIC onto your HTC DREAM. It *CAN* be made to work, HOWEVER, you failed to read and understand what is required to actually do it safely.
SPECIFICALLY, you are stuck in boot mode 3 -- boot to recovery, and because you changed the SPL, your recovery partition is UNABLE TO BOOT.
You are BRICKED, and the only way out is to use a hardware interface called "JTAG", which requires you to disassemble the phone.
SPECIFICALLY:
You missed the part of that thread that says "MOD EDIT PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION".
I have no sympathy for you. That instruction is in big purple letters.
hi thanks for your info, do you know anyone or anywhere i can get my phone jtagged?
How could you mess it up with step by step instructions....lol...I am being dead serious....it doesn't get more clear than this.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
crusader0071 said:
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
Click to expand...
Click to collapse
Did you follow those steps when flashing the SPL? Did you even flash the radio before flashing the SPL?
It sounds like you have no idea what you did to your phone which is never a good sign (and usually means you shouldn't even be flashing custom radios/spl's/roms)
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
heres what you do
ive did this too lmao jus go here www*androidhustler*blogspot*com ( THE * ARE REPLACEMENTS FOR . BECAUSE I CANT POST A OUTSIDE LINK SO U GET WUT IM SAYING SWITCH THE * WITH A . ) THEN SCROLL DWN TO A POST CALLED THE 2010 HOW TO GET CYANOGEN LATEST. DO ALL STEPS AND DONT RUSH. IF YOURE G1 DOESNT BOOT UP PROPERLY THEN I QUIT THIS SHYT BRO. LOL FOR REAL AND IF U HAVE ANY QUESTION EMAIL ME AT [email protected]*COM
crusader0071 said:
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
Click to expand...
Click to collapse
Sigh....I would go buy another phone off Craigslist or something similar.
Next time...please read before flashing....Although I'm sure you will after the last mishap.
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
I know here in town...there are so many G1's up for sale around the $150 mark in really really nice condition.
That's where I'd be looking if I bricked my G1. Well...I'd be replacing it with a HD2 probably...lol
garok89 said:
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
Click to expand...
Click to collapse
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
details
Sleeepy2 said:
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
Click to expand...
Click to collapse
have you got contact details for ezterry? if so pm me please.
as far as i can see the jtag is still in testing?
This noob is in the UK anyways. Let him figure it out.
Wrong section, soft bricked his own phone and freaking out.
Please READ. You are from the UK so your English isn't bad. You have no excuse for not following instructions.
Ways to fix your phone:
1) motherboard replacement
2) JTAG (experts are not anywhere near you though)
3) buy a new phone
Mods please get this out of here
Started to root the phone went back to 1.5, worked fine, applied FlashRec.apk and Amon Ra’s Recovery Image installed all that correctly worked fine. Went to install a new radio and spl and applied spl and when i go to start the phone it gets stuck at the G1 boot screen. Tried to book into recovery mode nothing happens , tried to hard & soft reset nothing happens. Phone just stays stuck at the G1 left it on for an hour and still nothing. Please help in any way or ask for more info if need.
Thanks in advance.
if you flashed the danger spl before flashing the new radio, your phone got permanent brick and cannot be solved without JTAG or changing the motherboard.
OK- I have the same problem, except I flashed the wrong radio.
(I thought I needed to update it for a different ROM, but.)
No fastboot, no recovery-- If I hold down the trackball, the screen wont come on, but the blue LED does. Is that useful to me at all??
Can JTAG help me? or is there another way?
I was reading about mtty-- but i'm not sure if that'll work for my G1.
Anything to unbrick this--- I really need my phone for finals week which started to-day.
JTAG is your only option.
techn0crat said:
Can JTAG help me?
Click to expand...
Click to collapse
Yes
techn0crat said:
or is there another way?
Click to expand...
Click to collapse
No.. at least none known yet
techn0crat said:
I was reading about mtty-- but i'm not sure if that'll work for my G1.
Click to expand...
Click to collapse
MTTY is just a program to talk to the serial port; it is actually part of the JTAG solution as well .. but as mentioned it will not help you at this point in time.
techn0crat said:
Anything to unbrick this--- I really need my phone for finals week which started to-day.
Click to expand...
Click to collapse
JTAG.. but unless you live near me or one of the very very few others who are set up for jtag hacks.. and that person is confident enough not to make the main board of the phone one big solder blob [I am but I'm not sure if some of the others I've heard poke JTAG are as confident].. it will take you a large chunk of time to learn what is needed to make it work.. or longer than the finals in the mail.
Thus I recommend.. get a cheap phone at the stand at the mall.. and pass your finals before worrying about the brick.
Since everyone who has caused a brick has either (1) not properly followed the directions and warnings.. or (2) did something in haste missing an important step; it will be no good to race it together during finals.
this dream was sent to my friend as a replacement
never used
he gave it to me sayingit wont boot
it gets into fastboot
it says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
so i formatted his sdcard, got the DREAIMG.nbh put it on his sdcard, entered into fastboot, and it ran the install (rainbow screen) nothing was happening from there before i copied the DREAIMG.nbh to it, so at least this installed successfully)
then i rebooted (call-menu-power at same time) and still stuck at G1 screen after twenty minutes...whats happening here, anybody?
tnpapadakos said:
then i rebooted (call-menu-power at same time) and still stuck at G1 screen after twenty minutes...whats happening here, anybody?
Click to expand...
Click to collapse
Odd, the nbh files usually flash a full system.. thus while they might leave you with a rom you don't wish to have they usually will boot afterwards. You did let it fully flash all the partitions correct?
What nbh did you find/flash?
And. Can you still enter the spl or recovery.
ezterry said:
Odd, the nbh files usually flash a full system.. thus while they might leave you with a rom you don't wish to have they usually will boot afterwards. You did let it fully flash all the partitions correct?
What nbh did you find/flash?
And. Can you still enter the spl or recovery.
Click to expand...
Click to collapse
RC29 from the cm wiki, flashed successfully, nothing but fastboot screen, no boot, no recovery boot
weird
tnpapadakos said:
RC29 from the cm wiki, flashed successfully, nothing but fastboot screen, no boot, no recovery boot
weird
Click to expand...
Click to collapse
lol, wtf? wait... don't some phones need a goldcard for this?
r3s-rt said:
lol, wtf? wait... don't some phones need a goldcard for this?
Click to expand...
Click to collapse
yeah i dont know, all i know is i can ONLY getinto the bootloader, which is the ORIGINAL bootloader (0.95.0000)
what can i do with this thing?
what do i flash to it (cause it aint the RC29 DREAIMG.nbh)?
i refuse to lose
well only bootloader means nothing. you cold be getting a bad .nbh and the recovery partition could have something nasty on it. both of those not working doesn't automatically make it a brick. a working bootloader says everything is ok.
set up fastboot and fastboot a new recovery image.
then see if your recovery works. next time i don't respond, feel free to pm me again, lol. i really have a hard time keeping up with where i post.
of course: you can also fastboot a new spl:
http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I recommend:
EngBootloader_v2_NoSigCheck.zip
That way you don't have to mess with that nasty danger spl and then you actually will be bricked.
Hi everybody,
I was trying to load the cyanogen mod to my G1
Had Android 1.6 and Radio 2.22.23.02
I downgraded to RC29 successfully
Rooted my phone
Loaded recovery-RA-dream-v1.7.0.img. Flashed successfully
Then started following instructions below:
wiki . cyanogenmod / index.php / DangerSPL_and_CM_5_for_Dream
I got stuck in step 6
It is probably because downgrading to RC29 also downgraded my radio version. I did not check the radio version again after I downgraded
Using danger.spl bricked the phone
I searched online and found some solutions with JTAG, but I am in Turkey and do not have access to purchasing these from ebay or the know-how to apply them (as you can tell from my mistake above!)
1) I found the below solution, but not sure if it will work:
code . google / p / android-roms / wiki / Unbrick
They say it will only work if you have soft-bricked your G1. I'm not sure
2) Others say I need to call T-mobile Customer care (where I purchased the phne from), but that was about a year and a half ago. How long is the warranty on the G1? 1 year or 2 years?
3) And yet others say use it paper-weight
Should I go for option 3?
What do you think?
Wiki Instructions
What is DangerSPL?
This SPL is actually a port of the Magic/MT3G (Sapphire)'s SPL to the Dream/G1. Called danger because not only does it wipe your data in the repartition process (data can be restored with Nandroid restore after flashing DangerSPL), it has a chance of bricking your phone if you would ever choose to downgrade the radio after flashing it (see below for compatible radios). Never flash a 1.x, 4.x, or 6.x radio with DangerSpl
It is not required for CyanogenMod versions 4.X (CM4) and below, but required for the CM5 series on the G1/Dream.
Why is it required for the CM5 series on G1/Dream?
The G1/Dream's /system partition was originally created to take ROMs up to 64MB. The CM5 series for the G1 & Magic/MT3G is currently too big to fit on this partition.
Why don't Magic/MT3G users have to apply it?
The Magic/MT3G (Sapphire)'s /system is set to take ROMs up to 96MB by default, so no SPL change is needed.
Is it dangerous?
While the method of applying it has been perfected over the course of its use, any modification of SPL/Radio/ROM carries with it an inherent risk. That being said, if you pay attention, follow instructions, and plan your approach, it is actually an easy process.
How do I check if I already have DangerSPL?
Boot into fastboot mode by turning the phone on while holding the camera button and pushing the power button. The second line contains your SPL version. If it ends in 2005 (eg 1.33.2005) then you have DangerSPL installed already. The line with RADIO tells the radio version, which is important if you don't have DangerSPL. To leave fastboot mode, press MENU+SEND+END at the same time.
Installation
Warnings
Make sure that you have a full battery during the steps below and at no point remove power from the device (i.e. no battery pulls!). See the first two bullets in troubleshooting regarding battery use after flashing CM5 and fixes for higher-than-expected battery drain.
There has been some development/debate over DVT/PVT and bricks. Optional reading (but still recommended): XDA forum
Prerequisites
A rooted G1/Dream
A compatible radio (IMPORTANT: If you just rooted, the RC29/RC7 install includes a 1.x radio and you MUST install one of the 2.x radios below before DangerSPL)
2.22.23.02 seems to get more bars for T-Mobile US customers, though non-US users might have better luck with 2.22.19.26i.
(HardSPL/Engineering Spl Users) Radio installations can be had by fastboot flash radio radio.img after extracting radio.img from the .zip
Either of the following radio versions is acceptable.
Radio 2.22.19.26I
Radio 2.22.23.02 (G1)
Rogers Dream users: A 3.X radio is Danger compatible (eg 3.22.26.17)
Failure to meet the Prerequisites WILL result in a BRICK!
Files required
Danger Spl
gapps-ds-ERE36B-signed.zip, Mirror1
Latest CM5 for Dream/Sapphire
ONLY Roger's Dream users: EBI1 kernel for 5.0.x
Steps
It has been brought up that Clockwork Recovery struggles with this guide, so Amon_ra is v1.7.0 recommended. If you have CM or older recovery, upgrade to Amon_Ra first.
Please if you need to diverge from these steps for any reason start over from step 1 when you return.
Boot into Fastboot (Power on the phone holding the camera button) This will either show a screen with dancing androids or a "rainbow" splash. Here you will find the hboot/radio version:
radio 1.x: You will need to upgrade this to a 2.x radio before running this process.. please upgrade and re-do this step (Ie. verify you see the updated radio in fastboot before continuing)
radio 2.x: You may press MENU+SEND+END at the same time and proceed (unless hboot-1.33.2005 is installed; indicating you already have dangerSPL)
radio 3.x: You may press MENU+SEND+END at the same time and proceed (unless hboot-1.33.2005 is installed; indicating you already have dangerSPL)
Copy DangerSPL (spl-signed.zip), CM 5.0.x, and gapps-ds-ERE36B (& Ebi1 port if required) to the root of your sdcard.
Reboot/Boot into your custom recovery by holding down the 'home' key before the G1 splash appears.
Make a Nandroid Backup (ext not required) (recommended for upgrading users, not required for freshly-rooted users)
Flash DangerSPL (spl-signed.zip). It will install and then ask you to reboot to finish the installation
Reboot as prompted at the bottom of the screen. This will finish installing DangerSPL and reboot back into recovery so you can flash your ROM.
Once back into recovery Wipe Data/Factory Reset
Flash CM 5.0.x THEN gapps-ds-ERE36B (& Ebi1 port if required); then reboot (Boot may take longer than normal)
Login to Android/Google as per usual
If you want to restore the nandroid backup (to attempt an unrecommended no-wipe upgrade between CM4.2 and CM5)
[Optional] Reboot to recovery, and issue a Nandroid Restore, then follow the regular instructions .
This command will attempt to restore user data.
Restoring will also restore your previous Firmware, so you have to follow the instructions to get 5.0.x again
Note: If this causes undesired consequences (ie bootloops, FC's, etc) then run Fix Permissions/'Fix UID Mismatches'.
***************************************
Instructions for the 'soft-brick' (I think)
How to Un-Brick Your Phone
(Method 1)
Ok so you're trying to put this really cool new custom ROM on your phone and then suddenly, your phone won't start up…well my friends, you have got yourself a bricked phone. The thing you worry about the entire time you're rooting, and flashing your phone, has now become reality. Well, fear no more, for I, CTDroidBeast have found a way to unbrick your device!
It's really easy. It's actually easier then rooting your phone, believe it or not.
Ok, you will need a new SD card, because I bet if you use the one out of your device your computer will not be able to read it. But if it does then HEY, you're in luck. You don't have to spend your money on a new SD card.
So let's get started.
Step 1: Turning Off Your Phone
Because you have a bricked phone, you can't just hold the power button. So if your phone is not already off then you're going to want to take out the battery.
Step 2: Preparing Our SD card
Take out your SD card and put it into an SD card reader or some type of other adapter so that we can view it from our computer. If you cannot view the SD card on your computer then you're going to need a new SD card.
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
Please help!
YOU FAILED.
If you don't take the time to read and learn what you are doing, why should anyone take the time to help you?
WHY would you EVER install RC29? IDIOTIC MOVE!
WHY would you EVER install deathSPL? IDIOTIC MOVE!
I say you deserve what you got.
lbcoder said:
YOU FAILED.
If you don't take the time to read and learn what you are doing, why should anyone take the time to help you?
WHY would you EVER install RC29? IDIOTIC MOVE!
WHY would you EVER install deathSPL? IDIOTIC MOVE!
I say you deserve what you got.
Click to expand...
Click to collapse
I was just following the Wiki instructions ( Full Update Guide - G1/Dream Firmware to CyanogenMod ) here:
My radio before downgrading was 2.x, so I assumed it would still be the same after the RC29 downgrade, but it turns out the downgrade also dongrades the radio to 1.x
therefore death spl bricked the phone
I should have checked the radio version for a 2nd time before flashing death spl
Is there any way to fix this now??
HEARTBREAKER123 said:
I was just following the Wiki instructions ( Full Update Guide - G1/Dream Firmware to CyanogenMod )
Click to expand...
Click to collapse
You did not follow the instructions.
You deliberately skipped step one on the danger spl instructions. Put there so that those who didn't realize the radio had become downgraded didn't do what you just did. You also ignored the warnings on that page that rc29 installs the 1.x radio.
HEARTBREAKER123 said:
Is there any way to fix this now??
Click to expand...
Click to collapse
What part of not having the right radio will brick your device wasn't understood..
by all means hope your recovery is messed up and that you have access to fastboot when you attatch a USB wire.
Otherwise there is jtag. .. bit more complex than flash spl-signed.zip after being 100% sure a 2.x radio is installed however..
Another option is replace it.. some have found replacing the main board + daughter board of a working phone in bad cosmetic shape (screen cracked) a cheap alternative here than a brand new dream. Still requires reading the service manual to properly disassemble what you need without having a bit of a mess.. particularly if you skip a step.
My recommended solution is to find a phone you can deal with stock firmware buy it and sell the rest of your dream as is.. you want root you need to understand the instructions not just follow them.
Alright, well I think he got the point - he should have followed instruction better
I'll keep it as straight forward as possible, no there is not a way you can unbrick your phone without the JTAG tools. T-Mobile's warranty is only one year, afterwards they will not replace your device for any reason.
The soft brick solution you posted will not work, because you have a hard brick.
I believe you only have a couple of solutions.
a) Get a new G1
b) Buy an old G1, preferably one with a broken screen so its cheaper, and place the motherboard of that G1 into your current one
c) Work with some members of XDA and see if you can work out an arrangement to get you the JTAG tools, though this is unlikely to work and difficult to do.
I'm sorry that you have broken your G1, it's a terrible feeling to break your phone in this way where everything is physically still perfect. I believe your best bets are probably solution "a" or "b", you can shop around locally and see if you can find anything
Best of luck.
Thanks for the help.
I think I will try and get another G1 to see if I can replace the motherboards
HEARTBREAKER123 said:
Thanks for the help.
I think I will try and get another G1 to see if I can replace the motherboards
Click to expand...
Click to collapse
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.
lbcoder said:
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.
Click to expand...
Click to collapse
Like the OP said, he lives in Turkey and is unable to purchase these items on eBay.
SolemnWishing said:
Like the OP said, he lives in Turkey and is unable to purchase these items on eBay.
Click to expand...
Click to collapse
Turkey is NOT a back-woods country and there ARE LOTS of sources besides ebay. In fact, ebay is the LAST place you should look for electronic components.
I GUARANTEE that the required components can be purchased in STORES all over the place in Turkey.
lbcoder said:
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.
Click to expand...
Click to collapse
$2? I thought Jtag cost like 70 bucks
racerxgt said:
$2? I thought Jtag cost like 70 bucks
Click to expand...
Click to collapse
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Being more careful this time, I went through the wiki steps and installed CM 5.0.8 and gapps-ds-ERE36B-signed
Yaay!
But then I noticed that CM6 was out, and that it had flash, so why wait, right?
I flashed CM6 with no problems, rebooted the phone, logged in, everything seemed OK, except that I didn't have google apps
So I flashed gapps-mdpi-FRF91-signed.zip and... I wasn't able to log on to google!
You know the menu that asks you to sign in to your google account at the beginning
It says "touch the android to begin"... And when I touched the android, it wouldn't ask for my username and password.. Right click would go into 'Wireless Settings', and I was able to successfully define an APN and get a 3G connection, however, even after all that, and when the phone had reception,
touching the android would make the android change color, but it wouldn't let me go to the next step!
So I decided to flash the previous google apps
Now the phone does not boot in normal mode
I can access the bootloader and the fastboot menu (both Camera+Power and Home+Power work fine), but I am not sure how to fix the problem I have
I tried downgrading to Android 1.5 and starting over, but when I go into the bootloader menu, I see 3 androids with skateboards and the following options:
CAMERA_STEP2 : Hboot mode
SEND: Reset device (Doesn't reset, it just reboots when you try)
ACTION: Restart to hboot
MENU: Power down
And when you are in hboot mode, you can't click anything
How can I revert to CM 5.0.8??
Also, is it normal for the new gapps to cause this type of an error?
HEARTBREAKER123 said:
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Being more careful this time, I went through the wiki steps and installed CM 5.0.8 and gapps-ds-ERE36B-signed
Yaay!
But then I noticed that CM6 was out, and that it had flash, so why wait, right?
I flashed CM6 with no problems, rebooted the phone, logged in, everything seemed OK, except that I didn't have google apps
So I flashed gapps-mdpi-FRF91-signed.zip and... I wasn't able to log on to google!
You know the menu that asks you to sign in to your google account at the beginning
It says "touch the android to begin"... And when I touched the android, it wouldn't ask for my username and password.. Right click would go into 'Wireless Settings', and I was able to successfully define an APN and get a 3G connection, however, even after all that, and when the phone had reception,
touching the android would make the android change color, but it wouldn't let me go to the next step!
So I decided to flash the previous google apps
Now the phone does not boot in normal mode
I can access the bootloader and the fastboot menu (both Camera+Power and Home+Power work fine), but I am not sure how to fix the problem I have
I tried downgrading to Android 1.5 and starting over, but when I go into the bootloader menu, I see 3 androids with skateboards and the following options:
CAMERA_STEP2 : Hboot mode
SEND: Reset device (Doesn't reset, it just reboots when you try)
ACTION: Restart to hboot
MENU: Power down
And when you are in hboot mode, you can't click anything
How can I revert to CM 5.0.8??
Also, is it normal for the new gapps to cause this type of an error?
Click to expand...
Click to collapse
*FACEPALM*
goldenarmZ said:
*FACEPALM*
Click to expand...
Click to collapse
Don't facepalm just yet
I managed to go back to 5.0.8 after doing everything from scratch
I guess I will use it like that for a while until CM6 / google apps stabilizes
HEARTBREAKER123 said:
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Click to expand...
Click to collapse
I bricked my G1 as well, but I'm not in the US
Do you have an idea what the JTAG adapter looked like ?
wow you guys sound mean to the poor guy when he was just making a newbie mistake. i remember when i was making all of those mistakes...hell im still making those mistakes and even thou i have gotten my fone to freeze on the g1 logo or even just go into a constant reboot im glad iv been able to fix the problem everytime and still dont know what im doing im just learning. but hey isnt that procedure that you have up there an unrooting procedure???? and for those getting the wrong gappss try downloading the tiny mdpi on the dream that one worked for me, the mdpi didnt work at all till i tried that one got it from the cyanogenmod site. by the way i gotta say thanks to all the devs, which i had a brain like yals id love to join in on developing but im kinda an idiot here lol
spike210 said:
wow you guys sound mean to the poor guy when he was just making a newbie mistake. i remember when i was making all of those mistakes...hell im still making those mistakes and even thou i have gotten my fone to freeze on the g1 logo or even just go into a constant reboot im glad iv been able to fix the problem everytime and still dont know what im doing im just learning. but hey isnt that procedure that you have up there an unrooting procedure???? and for those getting the wrong gappss try downloading the tiny mdpi on the dream that one worked for me, the mdpi didnt work at all till i tried that one got it from the cyanogenmod site. by the way i gotta say thanks to all the devs, which i had a brain like yals id love to join in on developing but im kinda an idiot here lol
Click to expand...
Click to collapse
bigest mistake evar was probably buyng tha damn mobo ...you see i have 3 HTC's 1 HTC Dream that work's just fine , 2 T Mobile G1 that it's a piece of **** ( it got's nothing in comon with HTC dream it's just a cheap crap copy of the original ) and 3 it's a HTC with Win Mobile wich i think it's by far the most stable mobile operating sistem for now , all of you will say that it does not work like that , but think about this .... how manny win mobo's hawe ever been bricked?! and how manny android mobos are there bricking every day ? your android will brick eventualy ... oh yeah and i am selling 2 HTC dream Black and white
Thumb's upp if you are born in the rong generation )
(Rogers HTC Dream)
Ok, so, i know this sounds ridiculous, and you may find yourself asking "WTF Was He Thinking?!?!?" But, was a late night, and i was quite possibly half asleep lol...
Ok, so, long story short, i have tried possibly every rom for the Rogers Dream, and majority of them didn't work for me, or atleast, if they did, not that well.... Cyanogenmod 6 worked ok, although it started to get slow pretty fast :/ Anyways, i had previously rooted and flashed my dream with the steps provided on cyanogen's wiki, but i had never updated the kernel or anything, so, i came to the conclusion that it was possibly my kernel that was un-allowing me to run most roms, so i decided to update my kernel using the steps here
"http://forum.xda-developers.com/showthread.php?t=831139"
Everything went well, kernel updated, wiped everything, except i accidently deleted my recovery.....but thought, no problem, i'll just follow the instructions on the thread, no biggie.....it said to download the "orange-1.58.73.2.nbh" and flash that......BUT... I Should have known that the Orange one was the one for T-Mobile!! But out of stupidity i didn't realize it and flashed it!! Now my phone won't boot up or Anything :/ when i try to boot into recovery OR Hboot, it shows the t-mobile startup flash, then shows an error with a triangle and a yellow exclamation in the middle, with a phone on it's side beside it!! :S
Did i completely mess up my phone?.... Someone please help!! x.x
I got a Rogers dream and I just push amonRA with adb. As for the exclamation screen, I think there is a key combo to bypass it. Something like volume up and power at the same time. I can't remember now the exact combination. Took a lot of Googling to find it, and if I remember correctly the dream has a different combo than the tmo did. But with this nexus one my memory has faded.
Sent from my Nexus One using Tapatalk
The orange nbh is orange not t-mob..
But has a eng spl so recovery is easy.. head over to my 2708+ radio thread and flash that, a 2708+ rom (most new roms support it and older ones the kernel in that thread will fix it.
Rogers if they are your carrier may cut wireless data there is a e911 wavier form to get around this search for it or ask the support person if they cut your data for detasils.
The good thing about using the 2708+ radio/kernel is extra ram, and it works on the rogers dream the same way as the non rogers dream thus you can ask more people to help support you with 2708+
Thanks for the reply guys,
ezterry:
thanks for replying, would had posted in your thread but didn't want to jam it full of even more posts of someone needing help lol...
as for your reply, it was after i had flashed the orange nbh that i was getting the t-mobile splash :S thus i assumed it was t-mobile.... but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck.....i tried using the usb cord to access adb through it, but on the comp it says there are no adb devices, i'm assuming it's because i can't get past the "no sim card" screen to enable debugging ..... Any suggestions?
Thanks!!
I'm going to hope you are doing something silly since your description indicates no problem with the phone.
SpawnOfSatan said:
but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned
Click to expand...
Click to collapse
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
SpawnOfSatan said:
, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck..
Click to expand...
Click to collapse
I don't recall if adb is enabled by default on the orange rom; regardless this is the rom. (putting a sim card active or not in the phone may let you get further however ought not be necessary )
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Powering on when holding 'camera' is supposed to always bring you to the HBOOT screen; then pressing send or back as prompted will let you to the Fastboot screen (don't re-flash the orange NBH, say no if it asks)
Alternatively either booting with send or back will go directly to HBOOT.. (The rogers [2000 series] dream uses Send while the t-mobile (100 series) users Back but some SPL only provide the back options regardless of dream model.. I don't recall about 1.42.2000 so you will want to try both)
In theory Home is the only button to send you to recovery.
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
Click to expand...
Click to collapse
Ahh ok lol, i'd installed RA recovery when i first got the phone, so it was the only recovery screen i remembered ever seeing, thus why i was confused, but yah, hit alt+L and saw the options, but yah, not that many :/
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Click to expand...
Click to collapse
Apparently was entering it wrong, i was used to using Home+Cam+End to enter hboot.....so that's my fault....
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
Click to expand...
Click to collapse
[/QUOTE]
When i enter hboot, it looks like a friggin rainbow now lol....red, green, blue, and white bars as the background :/ and once in hboot, it says "Serial0" in the middle of the screen :S and when i plug it into the computer, i tried hitting both back, and send, and it makes the "Serial0" dissapear, but seems no matter what i do, it won't show the phone as a connected device in fastboot :S
Thanks again for replying soo quickly and all the help u've been giving me, any advice on where to go from here or getting it to enter fastboot?
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
hey if you are still getting that screen with the yellow triangle and '!' that means you have stock tmobile recovery with no rom lol can you try to press (alt+L) hold alt and press L should make a list pop up.. if it does than maybe you can still re root it so than it will read your sim... but im not sure if the rogers G1 has and different software so it could possibly make it worse.. lol just a suggestion
ezterry said:
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
Click to expand...
Click to collapse
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
SpawnOfSatan said:
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
Click to expand...
Click to collapse
that sounds like stock 1.5 firmware to me
..Still have yet to find a solution....any help please?
info again is
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Background:
Accidently wiped rogers rom + flashed t-mobile rom, and since then,
Hboot says "Serial 0" and won't allow me to flash any images, phone doesnt have a recovery, will boot up now, but only to the android set-up process which i can't continue with because it won't accept my rogers sim card, despite the fact i unlocked the phone before all this happened :/ so i can't sign in to or create a google account. Have attempted every bypass to get past it with no success. Obviously since i can't get past it i have no access to adb...
Please help
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
BeenAndroidized said:
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
Click to expand...
Click to collapse
Thank you for your response, unfortunately i have tried that countless times with no luck it says it cannot read or flash or something, i forget what it says Exactly but it wouldn't allow it x.x any other suggestions?
I'm Really desperate x.x and i have been having the crappiest luck lately. I bought a phone off kijiji today, spent 3 hours trying to meet up with the guy to buy it, then when i did get it (after all the running around) i took it to "The Source" to get it activated in my name , and after 4 hours (5pm-9pm) they finally said they tried everything but couldn't do it because the phone is registered to someone with a contract that has a suspended account do to owing an outstanding amount of money!!
At this point, when you boot up the phone. What do you see?
BeenAndroidized said:
At this point, when you boot up the phone. What do you see?
Click to expand...
Click to collapse
It loads up to the setup screen, in which i cannot bypass...i have tried with another active (with data) rogers sim, telus sim, and virgin mobile sim card, but none of them will work....and like i previously mentioned, i unlocked the phone prior to all this happening :S
OK! I am not sure why it will not let you activate your phone. But don't worry about that ATM.
Let try activate your G1 over wifi. Follow the instruction from the link below.
http://theunlockr.com/2010/01/10/how-to-activate-the-g1-without-a-data-plan-or-sim-card/