Database Develop

[HELP] I think I bricked my Rogers Dream!

i was following this guide here http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod and everything seemed to go smoothly. i verified the md5 thing and it matched and everything. my sd card is fat32 for the record. i got to where it was flashing the spl. the screen stayed saying it was flashing for a really long time and half way through the device rebooted itself. It was plugged into its charger and I was not touching it. It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.

ddd67 said:
It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.
Click to expand...
Click to collapse
So can you get into recovery or fastboot?

Ace42 said:
So can you get into recovery or fastboot?
Click to expand...
Click to collapse
No, it doesn't do anything.

can anyone help PLEASE

If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.

ddd67 said:
No, it doesn't do anything.
Click to expand...
Click to collapse
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.

goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
fastludeh22 said:
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.
Click to expand...
Click to collapse
Can I send the phone anywhere and get it fixed?
goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?

ddd67 said:
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
Can I send the phone anywhere and get it fixed?
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?
Click to expand...
Click to collapse
It looks as if you didn't flash the radio first. the 26I radio, that is

Oh man, which part of the guide shows me how to flash the radio?

ddd67 said:
Oh man, which part of the guide shows me how to flash the radio?
Click to expand...
Click to collapse
If you flashed the spl already, it is too late. The radio NEEDS to be flashed first

@ people telling him to flash the radio, if you're following that guide, you don't flash the radio, you leave it as is.
He did nothing wrong, he just got ****ed up by pure chance, though if he were reading the guide closely he would realize that he wasn't supposed to put system.img on his SD card.

That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?

goldenarmZ said:
That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?
Click to expand...
Click to collapse
No dice. I didn't think it was possible for it to just brick on its own accord

AHH!
So I followed the turorial on updating the rogers HTC Dream to a T. I successfully changed the SPL to 1.33.2005 but the "system.img" file is no longers available on the HTC developer website. I tried using the system.img file from the Google I/O page (from the HTC developer website) but was left with a phone that pretty much was an HTC version of the iPod touch with no phone-related-applications working. does anyone have a backup of that system.img file for android 1.6 for the Htc DREAM??
Thanx
Meldon

@meldonlobo, are you looking for this?
http://forum.xda-developers.com/showthread.php?t=593626

I thought this was 100% safe. what happened?

my radio version was 3.22.20.17 and HBOOT-1.33.0009 (DREA21000). my friend told me to post that because it might help. Is that radio right for following the guide?? It also says 32B not A. The tutorial mentions something about 32A. Is that why?
i remember that if i went to recovery mode when it was stock it showd an exclamation mark

Please can someone tell?

Please help ASAP

Hello everyone,
I have a rooted g1 and I was putting on the 2.1 rom on my phone. I was following a guys instruction off of youtube but it totally messed my phone up. Now its stuck on the pitcure with the open box pointing a yellow arrow on the phone right next to it(the update screen), what do I do??? Thanks for your help.

You dont even have root then...If it shows what i think your taking about....You should follow this simple enough my little brother(7yr) could master it:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/

no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related

Sagz326 said:
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Click to expand...
Click to collapse
If you had root why did you flash the radio again?
That gives bricks applying radio after having root is pointless.
What are you trying to do?

i dont know im a noob if you dont know by know. well is there anything i can do???

Sagz326 said:
i dont know im a noob if you dont know by know. well is there anything i can do???
Click to expand...
Click to collapse
Just tell me everything you did, step by step.

ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck

Sagz326 said:
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Click to expand...
Click to collapse
radio and spl?'
But you have to have a custom recovery image before you can flash either of those.

i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position

yeah i have amonra

Sagz326 said:
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
Click to expand...
Click to collapse
Ahh you might brick, you seem to have flashed the Radio made for HTC hero not G1....Notice the title: "How to get Android 2.1 on HTC Hero"
To use Hero 2.1 on G1 it shows it here @ XDA, you only needed Haykuro SPL and the 26I radio/
If rec mode is working then you arent brick or if you can get into bootloader.

how do i get in rec mode or bootloader

Hold down home when turning on the phone=recovery
Hold down camera button while powering on= bootloader
If you can't get into either one of those, likely bricked. I know with WM devices flashing a radio for another phone is one of the fastest ways to brick your phone, Android seems to be much more forgiving, so hopefully you will be lucky and if recovery and bootloader don't work, you can possibly get ADB to work.

If you don't figure out how to do this BEFORE you do it, you will likely brick your phone, if not sooner, soon enough. Doing it along with a video isn't enough to make sure you won't brick your phone.
Read through the steps of rooting, flashing a basic, stock ROM, do that a time or two, and then get into the more up-to-date stuff.
Your method of going about a new task is going to... well, it isn't going to work, unless you are really, really lucky.

plz help - Rom install - Failure at line.. Install aborted

I rooted my G1 last night and have yet been able to load a Rom on it.
my radio is 2.22.19261
and I do not know how to check what my spl is. also when I try to install the newest spl to make sure I have it Im not sure how to install it since when I boot up pressing home and power it goes to RA-dream-v1.5.2. not sure how to do the update from here.
The 3 Roms I have tried so far are:
-FastTest2.4.1
-SuperD193-blk-WGKv3beta
-MLIGN-HeroV3.3
fasttest and superD get failure at line 59
MLIGN-Hero gets failure at line 80
So is there something I'm missing somewhere and if its the spl can someone point me in the right direction to update it??
Im still researching, but a lil help would be apprieciated and amazing

It shows the SPL version in your first screenshot. The SPL you need to load the roms you listed is in my signature.
You should be able to flash the SPL without problems because you meet the radio requirement already.

thanks.. I was just logging in to say I already got it figured out..
I thought I still had to rename the spl as update and then get the phone to boot to it wick i couldnt figure out how to do after I rooted it.
I booting it to recovery and then choose to Flash zip from sdcard.. choosing the spl I loaded on the sdcard
Works great now.. im testing out FastTest2.4.1 right now
Thanks again

Help
I have the exact problem, the pic that this person has is the same thing that shows up on my phone! but it wont let me even get on my phone if i turn it goes directly to android system recovery.. ????????

samanthamaresh said:
I have the exact problem, the pic that this person has is the same thing that shows up on my phone! but it wont let me even get on my phone if i turn it goes directly to android system recovery.. ????????
Click to expand...
Click to collapse
I'm going to be nice this time but next time make sure you read on how to root your phone and install either HardSPL or EngSPL. Do not flash Haykuro's/Death/Danger because you'll likely brick your phone (since your first post has such an obvious answer)
http://forum.xda-developers.com/showthread.php?t=442480

Hard Bricked my G1. Any way to unbrick it?

Hi everybody,
I was trying to load the cyanogen mod to my G1
Had Android 1.6 and Radio 2.22.23.02
I downgraded to RC29 successfully
Rooted my phone
Loaded recovery-RA-dream-v1.7.0.img. Flashed successfully
Then started following instructions below:
wiki . cyanogenmod / index.php / DangerSPL_and_CM_5_for_Dream
I got stuck in step 6
It is probably because downgrading to RC29 also downgraded my radio version. I did not check the radio version again after I downgraded
Using danger.spl bricked the phone
I searched online and found some solutions with JTAG, but I am in Turkey and do not have access to purchasing these from ebay or the know-how to apply them (as you can tell from my mistake above!)
1) I found the below solution, but not sure if it will work:
code . google / p / android-roms / wiki / Unbrick
They say it will only work if you have soft-bricked your G1. I'm not sure
2) Others say I need to call T-mobile Customer care (where I purchased the phne from), but that was about a year and a half ago. How long is the warranty on the G1? 1 year or 2 years?
3) And yet others say use it paper-weight
Should I go for option 3?
What do you think?

Wiki Instructions
What is DangerSPL?
This SPL is actually a port of the Magic/MT3G (Sapphire)'s SPL to the Dream/G1. Called danger because not only does it wipe your data in the repartition process (data can be restored with Nandroid restore after flashing DangerSPL), it has a chance of bricking your phone if you would ever choose to downgrade the radio after flashing it (see below for compatible radios). Never flash a 1.x, 4.x, or 6.x radio with DangerSpl
It is not required for CyanogenMod versions 4.X (CM4) and below, but required for the CM5 series on the G1/Dream.
Why is it required for the CM5 series on G1/Dream?
The G1/Dream's /system partition was originally created to take ROMs up to 64MB. The CM5 series for the G1 & Magic/MT3G is currently too big to fit on this partition.
Why don't Magic/MT3G users have to apply it?
The Magic/MT3G (Sapphire)'s /system is set to take ROMs up to 96MB by default, so no SPL change is needed.
Is it dangerous?
While the method of applying it has been perfected over the course of its use, any modification of SPL/Radio/ROM carries with it an inherent risk. That being said, if you pay attention, follow instructions, and plan your approach, it is actually an easy process.
How do I check if I already have DangerSPL?
Boot into fastboot mode by turning the phone on while holding the camera button and pushing the power button. The second line contains your SPL version. If it ends in 2005 (eg 1.33.2005) then you have DangerSPL installed already. The line with RADIO tells the radio version, which is important if you don't have DangerSPL. To leave fastboot mode, press MENU+SEND+END at the same time.
Installation
Warnings
Make sure that you have a full battery during the steps below and at no point remove power from the device (i.e. no battery pulls!). See the first two bullets in troubleshooting regarding battery use after flashing CM5 and fixes for higher-than-expected battery drain.
There has been some development/debate over DVT/PVT and bricks. Optional reading (but still recommended): XDA forum
Prerequisites
A rooted G1/Dream
A compatible radio (IMPORTANT: If you just rooted, the RC29/RC7 install includes a 1.x radio and you MUST install one of the 2.x radios below before DangerSPL)
2.22.23.02 seems to get more bars for T-Mobile US customers, though non-US users might have better luck with 2.22.19.26i.
(HardSPL/Engineering Spl Users) Radio installations can be had by fastboot flash radio radio.img after extracting radio.img from the .zip
Either of the following radio versions is acceptable.
Radio 2.22.19.26I
Radio 2.22.23.02 (G1)
Rogers Dream users: A 3.X radio is Danger compatible (eg 3.22.26.17)
Failure to meet the Prerequisites WILL result in a BRICK!
Files required
Danger Spl
gapps-ds-ERE36B-signed.zip, Mirror1
Latest CM5 for Dream/Sapphire
ONLY Roger's Dream users: EBI1 kernel for 5.0.x
Steps
It has been brought up that Clockwork Recovery struggles with this guide, so Amon_ra is v1.7.0 recommended. If you have CM or older recovery, upgrade to Amon_Ra first.
Please if you need to diverge from these steps for any reason start over from step 1 when you return.
Boot into Fastboot (Power on the phone holding the camera button) This will either show a screen with dancing androids or a "rainbow" splash. Here you will find the hboot/radio version:
radio 1.x: You will need to upgrade this to a 2.x radio before running this process.. please upgrade and re-do this step (Ie. verify you see the updated radio in fastboot before continuing)
radio 2.x: You may press MENU+SEND+END at the same time and proceed (unless hboot-1.33.2005 is installed; indicating you already have dangerSPL)
radio 3.x: You may press MENU+SEND+END at the same time and proceed (unless hboot-1.33.2005 is installed; indicating you already have dangerSPL)
Copy DangerSPL (spl-signed.zip), CM 5.0.x, and gapps-ds-ERE36B (& Ebi1 port if required) to the root of your sdcard.
Reboot/Boot into your custom recovery by holding down the 'home' key before the G1 splash appears.
Make a Nandroid Backup (ext not required) (recommended for upgrading users, not required for freshly-rooted users)
Flash DangerSPL (spl-signed.zip). It will install and then ask you to reboot to finish the installation
Reboot as prompted at the bottom of the screen. This will finish installing DangerSPL and reboot back into recovery so you can flash your ROM.
Once back into recovery Wipe Data/Factory Reset
Flash CM 5.0.x THEN gapps-ds-ERE36B (& Ebi1 port if required); then reboot (Boot may take longer than normal)
Login to Android/Google as per usual
If you want to restore the nandroid backup (to attempt an unrecommended no-wipe upgrade between CM4.2 and CM5)
[Optional] Reboot to recovery, and issue a Nandroid Restore, then follow the regular instructions .
This command will attempt to restore user data.
Restoring will also restore your previous Firmware, so you have to follow the instructions to get 5.0.x again
Note: If this causes undesired consequences (ie bootloops, FC's, etc) then run Fix Permissions/'Fix UID Mismatches'.
***************************************
Instructions for the 'soft-brick' (I think)
How to Un-Brick Your Phone
(Method 1)
Ok so you're trying to put this really cool new custom ROM on your phone and then suddenly, your phone won't start up…well my friends, you have got yourself a bricked phone. The thing you worry about the entire time you're rooting, and flashing your phone, has now become reality. Well, fear no more, for I, CTDroidBeast have found a way to unbrick your device!
It's really easy. It's actually easier then rooting your phone, believe it or not.
Ok, you will need a new SD card, because I bet if you use the one out of your device your computer will not be able to read it. But if it does then HEY, you're in luck. You don't have to spend your money on a new SD card.
So let's get started.
Step 1: Turning Off Your Phone
Because you have a bricked phone, you can't just hold the power button. So if your phone is not already off then you're going to want to take out the battery.
Step 2: Preparing Our SD card
Take out your SD card and put it into an SD card reader or some type of other adapter so that we can view it from our computer. If you cannot view the SD card on your computer then you're going to need a new SD card.
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.

Please help!

YOU FAILED.
If you don't take the time to read and learn what you are doing, why should anyone take the time to help you?
WHY would you EVER install RC29? IDIOTIC MOVE!
WHY would you EVER install deathSPL? IDIOTIC MOVE!
I say you deserve what you got.

lbcoder said:
YOU FAILED.
If you don't take the time to read and learn what you are doing, why should anyone take the time to help you?
WHY would you EVER install RC29? IDIOTIC MOVE!
WHY would you EVER install deathSPL? IDIOTIC MOVE!
I say you deserve what you got.
Click to expand...
Click to collapse
I was just following the Wiki instructions ( Full Update Guide - G1/Dream Firmware to CyanogenMod ) here:
My radio before downgrading was 2.x, so I assumed it would still be the same after the RC29 downgrade, but it turns out the downgrade also dongrades the radio to 1.x
therefore death spl bricked the phone
I should have checked the radio version for a 2nd time before flashing death spl
Is there any way to fix this now??

HEARTBREAKER123 said:
I was just following the Wiki instructions ( Full Update Guide - G1/Dream Firmware to CyanogenMod )
Click to expand...
Click to collapse
You did not follow the instructions.
You deliberately skipped step one on the danger spl instructions. Put there so that those who didn't realize the radio had become downgraded didn't do what you just did. You also ignored the warnings on that page that rc29 installs the 1.x radio.
HEARTBREAKER123 said:
Is there any way to fix this now??
Click to expand...
Click to collapse
What part of not having the right radio will brick your device wasn't understood..
by all means hope your recovery is messed up and that you have access to fastboot when you attatch a USB wire.
Otherwise there is jtag. .. bit more complex than flash spl-signed.zip after being 100% sure a 2.x radio is installed however..
Another option is replace it.. some have found replacing the main board + daughter board of a working phone in bad cosmetic shape (screen cracked) a cheap alternative here than a brand new dream. Still requires reading the service manual to properly disassemble what you need without having a bit of a mess.. particularly if you skip a step.
My recommended solution is to find a phone you can deal with stock firmware buy it and sell the rest of your dream as is.. you want root you need to understand the instructions not just follow them.

Alright, well I think he got the point - he should have followed instruction better
I'll keep it as straight forward as possible, no there is not a way you can unbrick your phone without the JTAG tools. T-Mobile's warranty is only one year, afterwards they will not replace your device for any reason.
The soft brick solution you posted will not work, because you have a hard brick.
I believe you only have a couple of solutions.
a) Get a new G1
b) Buy an old G1, preferably one with a broken screen so its cheaper, and place the motherboard of that G1 into your current one
c) Work with some members of XDA and see if you can work out an arrangement to get you the JTAG tools, though this is unlikely to work and difficult to do.
I'm sorry that you have broken your G1, it's a terrible feeling to break your phone in this way where everything is physically still perfect. I believe your best bets are probably solution "a" or "b", you can shop around locally and see if you can find anything
Best of luck.

Thanks for the help.
I think I will try and get another G1 to see if I can replace the motherboards

HEARTBREAKER123 said:
Thanks for the help.
I think I will try and get another G1 to see if I can replace the motherboards
Click to expand...
Click to collapse
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.

lbcoder said:
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.
Click to expand...
Click to collapse
Like the OP said, he lives in Turkey and is unable to purchase these items on eBay.

SolemnWishing said:
Like the OP said, he lives in Turkey and is unable to purchase these items on eBay.
Click to expand...
Click to collapse
Turkey is NOT a back-woods country and there ARE LOTS of sources besides ebay. In fact, ebay is the LAST place you should look for electronic components.
I GUARANTEE that the required components can be purchased in STORES all over the place in Turkey.

lbcoder said:
You know, if you're going to all the trouble of taking it apart and planning on essentially throwing the mainboard in the trash anyways, what do you really have to lose in attempting to jtag the thing? $2 worth of components and a couple hours of your time? Worst that happens is you fry it, in which case you were planning on trashing it anyway.
Click to expand...
Click to collapse
$2? I thought Jtag cost like 70 bucks

racerxgt said:
$2? I thought Jtag cost like 70 bucks
Click to expand...
Click to collapse
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Being more careful this time, I went through the wiki steps and installed CM 5.0.8 and gapps-ds-ERE36B-signed
Yaay!
But then I noticed that CM6 was out, and that it had flash, so why wait, right?
I flashed CM6 with no problems, rebooted the phone, logged in, everything seemed OK, except that I didn't have google apps
So I flashed gapps-mdpi-FRF91-signed.zip and... I wasn't able to log on to google!
You know the menu that asks you to sign in to your google account at the beginning
It says "touch the android to begin"... And when I touched the android, it wouldn't ask for my username and password.. Right click would go into 'Wireless Settings', and I was able to successfully define an APN and get a 3G connection, however, even after all that, and when the phone had reception,
touching the android would make the android change color, but it wouldn't let me go to the next step!
So I decided to flash the previous google apps
Now the phone does not boot in normal mode
I can access the bootloader and the fastboot menu (both Camera+Power and Home+Power work fine), but I am not sure how to fix the problem I have
I tried downgrading to Android 1.5 and starting over, but when I go into the bootloader menu, I see 3 androids with skateboards and the following options:
CAMERA_STEP2 : Hboot mode
SEND: Reset device (Doesn't reset, it just reboots when you try)
ACTION: Restart to hboot
MENU: Power down
And when you are in hboot mode, you can't click anything
How can I revert to CM 5.0.8??
Also, is it normal for the new gapps to cause this type of an error?

HEARTBREAKER123 said:
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Being more careful this time, I went through the wiki steps and installed CM 5.0.8 and gapps-ds-ERE36B-signed
Yaay!
But then I noticed that CM6 was out, and that it had flash, so why wait, right?
I flashed CM6 with no problems, rebooted the phone, logged in, everything seemed OK, except that I didn't have google apps
So I flashed gapps-mdpi-FRF91-signed.zip and... I wasn't able to log on to google!
You know the menu that asks you to sign in to your google account at the beginning
It says "touch the android to begin"... And when I touched the android, it wouldn't ask for my username and password.. Right click would go into 'Wireless Settings', and I was able to successfully define an APN and get a 3G connection, however, even after all that, and when the phone had reception,
touching the android would make the android change color, but it wouldn't let me go to the next step!
So I decided to flash the previous google apps
Now the phone does not boot in normal mode
I can access the bootloader and the fastboot menu (both Camera+Power and Home+Power work fine), but I am not sure how to fix the problem I have
I tried downgrading to Android 1.5 and starting over, but when I go into the bootloader menu, I see 3 androids with skateboards and the following options:
CAMERA_STEP2 : Hboot mode
SEND: Reset device (Doesn't reset, it just reboots when you try)
ACTION: Restart to hboot
MENU: Power down
And when you are in hboot mode, you can't click anything
How can I revert to CM 5.0.8??
Also, is it normal for the new gapps to cause this type of an error?
Click to expand...
Click to collapse
*FACEPALM*

goldenarmZ said:
*FACEPALM*
Click to expand...
Click to collapse
Don't facepalm just yet
I managed to go back to 5.0.8 after doing everything from scratch
I guess I will use it like that for a while until CM6 / google apps stabilizes

HEARTBREAKER123 said:
Okay, I have good news and bad news
THe good news is that I was able to find someone with a jtag adapter and he fixed the phone for me for $50
Click to expand...
Click to collapse
I bricked my G1 as well, but I'm not in the US
Do you have an idea what the JTAG adapter looked like ?

wow you guys sound mean to the poor guy when he was just making a newbie mistake. i remember when i was making all of those mistakes...hell im still making those mistakes and even thou i have gotten my fone to freeze on the g1 logo or even just go into a constant reboot im glad iv been able to fix the problem everytime and still dont know what im doing im just learning. but hey isnt that procedure that you have up there an unrooting procedure???? and for those getting the wrong gappss try downloading the tiny mdpi on the dream that one worked for me, the mdpi didnt work at all till i tried that one got it from the cyanogenmod site. by the way i gotta say thanks to all the devs, which i had a brain like yals id love to join in on developing but im kinda an idiot here lol

spike210 said:
wow you guys sound mean to the poor guy when he was just making a newbie mistake. i remember when i was making all of those mistakes...hell im still making those mistakes and even thou i have gotten my fone to freeze on the g1 logo or even just go into a constant reboot im glad iv been able to fix the problem everytime and still dont know what im doing im just learning. but hey isnt that procedure that you have up there an unrooting procedure???? and for those getting the wrong gappss try downloading the tiny mdpi on the dream that one worked for me, the mdpi didnt work at all till i tried that one got it from the cyanogenmod site. by the way i gotta say thanks to all the devs, which i had a brain like yals id love to join in on developing but im kinda an idiot here lol
Click to expand...
Click to collapse
bigest mistake evar was probably buyng tha damn mobo ...you see i have 3 HTC's 1 HTC Dream that work's just fine , 2 T Mobile G1 that it's a piece of **** ( it got's nothing in comon with HTC dream it's just a cheap crap copy of the original ) and 3 it's a HTC with Win Mobile wich i think it's by far the most stable mobile operating sistem for now , all of you will say that it does not work like that , but think about this .... how manny win mobo's hawe ever been bricked?! and how manny android mobos are there bricking every day ? your android will brick eventualy ... oh yeah and i am selling 2 HTC dream Black and white
Thumb's upp if you are born in the rong generation )

HELP!! May have Seriously Messed up phone...

(Rogers HTC Dream)
Ok, so, i know this sounds ridiculous, and you may find yourself asking "WTF Was He Thinking?!?!?" But, was a late night, and i was quite possibly half asleep lol...
Ok, so, long story short, i have tried possibly every rom for the Rogers Dream, and majority of them didn't work for me, or atleast, if they did, not that well.... Cyanogenmod 6 worked ok, although it started to get slow pretty fast :/ Anyways, i had previously rooted and flashed my dream with the steps provided on cyanogen's wiki, but i had never updated the kernel or anything, so, i came to the conclusion that it was possibly my kernel that was un-allowing me to run most roms, so i decided to update my kernel using the steps here
"http://forum.xda-developers.com/showthread.php?t=831139"
Everything went well, kernel updated, wiped everything, except i accidently deleted my recovery.....but thought, no problem, i'll just follow the instructions on the thread, no biggie.....it said to download the "orange-1.58.73.2.nbh" and flash that......BUT... I Should have known that the Orange one was the one for T-Mobile!! But out of stupidity i didn't realize it and flashed it!! Now my phone won't boot up or Anything :/ when i try to boot into recovery OR Hboot, it shows the t-mobile startup flash, then shows an error with a triangle and a yellow exclamation in the middle, with a phone on it's side beside it!! :S
Did i completely mess up my phone?.... Someone please help!! x.x

I got a Rogers dream and I just push amonRA with adb. As for the exclamation screen, I think there is a key combo to bypass it. Something like volume up and power at the same time. I can't remember now the exact combination. Took a lot of Googling to find it, and if I remember correctly the dream has a different combo than the tmo did. But with this nexus one my memory has faded.
Sent from my Nexus One using Tapatalk

The orange nbh is orange not t-mob..
But has a eng spl so recovery is easy.. head over to my 2708+ radio thread and flash that, a 2708+ rom (most new roms support it and older ones the kernel in that thread will fix it.
Rogers if they are your carrier may cut wireless data there is a e911 wavier form to get around this search for it or ask the support person if they cut your data for detasils.
The good thing about using the 2708+ radio/kernel is extra ram, and it works on the rogers dream the same way as the non rogers dream thus you can ask more people to help support you with 2708+

Thanks for the reply guys,
ezterry:
thanks for replying, would had posted in your thread but didn't want to jam it full of even more posts of someone needing help lol...
as for your reply, it was after i had flashed the orange nbh that i was getting the t-mobile splash :S thus i assumed it was t-mobile.... but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck.....i tried using the usb cord to access adb through it, but on the comp it says there are no adb devices, i'm assuming it's because i can't get past the "no sim card" screen to enable debugging ..... Any suggestions?
Thanks!!

I'm going to hope you are doing something silly since your description indicates no problem with the phone.
SpawnOfSatan said:
but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned
Click to expand...
Click to collapse
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
SpawnOfSatan said:
, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck..
Click to expand...
Click to collapse
I don't recall if adb is enabled by default on the orange rom; regardless this is the rom. (putting a sim card active or not in the phone may let you get further however ought not be necessary )
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Powering on when holding 'camera' is supposed to always bring you to the HBOOT screen; then pressing send or back as prompted will let you to the Fastboot screen (don't re-flash the orange NBH, say no if it asks)
Alternatively either booting with send or back will go directly to HBOOT.. (The rogers [2000 series] dream uses Send while the t-mobile (100 series) users Back but some SPL only provide the back options regardless of dream model.. I don't recall about 1.42.2000 so you will want to try both)
In theory Home is the only button to send you to recovery.
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC

That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
Click to expand...
Click to collapse
Ahh ok lol, i'd installed RA recovery when i first got the phone, so it was the only recovery screen i remembered ever seeing, thus why i was confused, but yah, hit alt+L and saw the options, but yah, not that many :/
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Click to expand...
Click to collapse
Apparently was entering it wrong, i was used to using Home+Cam+End to enter hboot.....so that's my fault....
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
Click to expand...
Click to collapse
[/QUOTE]
When i enter hboot, it looks like a friggin rainbow now lol....red, green, blue, and white bars as the background :/ and once in hboot, it says "Serial0" in the middle of the screen :S and when i plug it into the computer, i tried hitting both back, and send, and it makes the "Serial0" dissapear, but seems no matter what i do, it won't show the phone as a connected device in fastboot :S
Thanks again for replying soo quickly and all the help u've been giving me, any advice on where to go from here or getting it to enter fastboot?

What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..

hey if you are still getting that screen with the yellow triangle and '!' that means you have stock tmobile recovery with no rom lol can you try to press (alt+L) hold alt and press L should make a list pop up.. if it does than maybe you can still re root it so than it will read your sim... but im not sure if the rogers G1 has and different software so it could possibly make it worse.. lol just a suggestion

ezterry said:
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
Click to expand...
Click to collapse
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S

SpawnOfSatan said:
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
Click to expand...
Click to collapse
that sounds like stock 1.5 firmware to me

..Still have yet to find a solution....any help please?
info again is
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Background:
Accidently wiped rogers rom + flashed t-mobile rom, and since then,
Hboot says "Serial 0" and won't allow me to flash any images, phone doesnt have a recovery, will boot up now, but only to the android set-up process which i can't continue with because it won't accept my rogers sim card, despite the fact i unlocked the phone before all this happened :/ so i can't sign in to or create a google account. Have attempted every bypass to get past it with no success. Obviously since i can't get past it i have no access to adb...
Please help

Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.

BeenAndroidized said:
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
Click to expand...
Click to collapse
Thank you for your response, unfortunately i have tried that countless times with no luck it says it cannot read or flash or something, i forget what it says Exactly but it wouldn't allow it x.x any other suggestions?
I'm Really desperate x.x and i have been having the crappiest luck lately. I bought a phone off kijiji today, spent 3 hours trying to meet up with the guy to buy it, then when i did get it (after all the running around) i took it to "The Source" to get it activated in my name , and after 4 hours (5pm-9pm) they finally said they tried everything but couldn't do it because the phone is registered to someone with a contract that has a suspended account do to owing an outstanding amount of money!!

At this point, when you boot up the phone. What do you see?

BeenAndroidized said:
At this point, when you boot up the phone. What do you see?
Click to expand...
Click to collapse
It loads up to the setup screen, in which i cannot bypass...i have tried with another active (with data) rogers sim, telus sim, and virgin mobile sim card, but none of them will work....and like i previously mentioned, i unlocked the phone prior to all this happening :S

OK! I am not sure why it will not let you activate your phone. But don't worry about that ATM.
Let try activate your G1 over wifi. Follow the instruction from the link below.
http://theunlockr.com/2010/01/10/how-to-activate-the-g1-without-a-data-plan-or-sim-card/