i was following this guide here http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod and everything seemed to go smoothly. i verified the md5 thing and it matched and everything. my sd card is fat32 for the record. i got to where it was flashing the spl. the screen stayed saying it was flashing for a really long time and half way through the device rebooted itself. It was plugged into its charger and I was not touching it. It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.
ddd67 said:
It just rebooted prematurely before the spl had been flashed. now when I boot up it doesnt bring up android or anything!
i bought this phone second hand and unlocked it, im using it with telus. If its bricked can i send it anywhere to get fixed?
edit: not sure if it means anything but it said HBOOT was 0009 not 0010. apparently 0010 was perfect spl or something like that. im not sure if this matters but its just something i noticed.
Click to expand...
Click to collapse
So can you get into recovery or fastboot?
Ace42 said:
So can you get into recovery or fastboot?
Click to expand...
Click to collapse
No, it doesn't do anything.
can anyone help PLEASE
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
ddd67 said:
No, it doesn't do anything.
Click to expand...
Click to collapse
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.
goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
fastludeh22 said:
Which spl were you flashing? Did you flash a radio first?
Not being an ass, but you do know how to enter these modes, right.
Fastboot= camera+power held down
Recovery= home+power held down
If it is indeed bricked, there are very few solutions. Only working one is replacing board at the moment. There is other ways trying to be had in development forum as we speak. Don't start a new theard, but search and read thoses, maybe something can help you/help them.
Click to expand...
Click to collapse
Can I send the phone anywhere and get it fixed?
goldenarmZ said:
If you interrupted the spl flash (why would you do that btw?!) and you cant enter recovery or bootloader, you're bricked.
Click to expand...
Click to collapse
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?
ddd67 said:
That's the thing, I didn't interrupt the flash. I thought that if I checked the md5 hash that it would work perfectly. I didnt know it could fail without me doing anything.
Can I send the phone anywhere and get it fixed?
I followed this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod
My dream is a rogers one, so I assume its EBl1, I haven't done anything to it besides follow that guide.
1. I got my 2GB memory card and formatted it to FAT32 on my computer.
2. I put spl-1332005.zip on the card (I kept it as a zip)
3. I downloaded this file: signed-dream_devphone_userdebug-img-14721.zip
4. I opened that file I downloaded and copied system.img to my memory card.
5. I downloaded update-cm-4.2.x-signed.zip and bc-4.2.x-ebi1-signed.zip on my SD cards root.
6. I installed zinx recovery flasher and cm-recovery-1.4 32A flashed onto my phone (now that I think about it I didnt check to see if my phones 32A. I don't know where to do that)
7. I booted into cyanogenmod screen.
8. I flashed the SPL, it didn't get interrupted and I thought all went right, but I guess not.
That is everything I did. did I do something wrong?
Click to expand...
Click to collapse
It looks as if you didn't flash the radio first. the 26I radio, that is
Oh man, which part of the guide shows me how to flash the radio?
ddd67 said:
Oh man, which part of the guide shows me how to flash the radio?
Click to expand...
Click to collapse
If you flashed the spl already, it is too late. The radio NEEDS to be flashed first
@ people telling him to flash the radio, if you're following that guide, you don't flash the radio, you leave it as is.
He did nothing wrong, he just got ****ed up by pure chance, though if he were reading the guide closely he would realize that he wasn't supposed to put system.img on his SD card.
That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?
goldenarmZ said:
That SPL is safe on all Rogers dreams.. either you were spectacularly unlucky with a bad flash, or it isn't actually bricked.. Remove the battery, hold the camera button, replace the battery and power on.. anything?
Click to expand...
Click to collapse
No dice. I didn't think it was possible for it to just brick on its own accord
AHH!
So I followed the turorial on updating the rogers HTC Dream to a T. I successfully changed the SPL to 1.33.2005 but the "system.img" file is no longers available on the HTC developer website. I tried using the system.img file from the Google I/O page (from the HTC developer website) but was left with a phone that pretty much was an HTC version of the iPod touch with no phone-related-applications working. does anyone have a backup of that system.img file for android 1.6 for the Htc DREAM??
Thanx
Meldon
@meldonlobo, are you looking for this?
http://forum.xda-developers.com/showthread.php?t=593626
I thought this was 100% safe. what happened?
my radio version was 3.22.20.17 and HBOOT-1.33.0009 (DREA21000). my friend told me to post that because it might help. Is that radio right for following the guide?? It also says 32B not A. The tutorial mentions something about 32A. Is that why?
i remember that if i went to recovery mode when it was stock it showd an exclamation mark
Please can someone tell?
Related
Hello everyone,
I have a rooted g1 and I was putting on the 2.1 rom on my phone. I was following a guys instruction off of youtube but it totally messed my phone up. Now its stuck on the pitcure with the open box pointing a yellow arrow on the phone right next to it(the update screen), what do I do??? Thanks for your help.
You dont even have root then...If it shows what i think your taking about....You should follow this simple enough my little brother(7yr) could master it:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Sagz326 said:
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Click to expand...
Click to collapse
If you had root why did you flash the radio again?
That gives bricks applying radio after having root is pointless.
What are you trying to do?
i dont know im a noob if you dont know by know. well is there anything i can do???
Sagz326 said:
i dont know im a noob if you dont know by know. well is there anything i can do???
Click to expand...
Click to collapse
Just tell me everything you did, step by step.
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Sagz326 said:
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Click to expand...
Click to collapse
radio and spl?'
But you have to have a custom recovery image before you can flash either of those.
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
yeah i have amonra
Sagz326 said:
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
Click to expand...
Click to collapse
Ahh you might brick, you seem to have flashed the Radio made for HTC hero not G1....Notice the title: "How to get Android 2.1 on HTC Hero"
To use Hero 2.1 on G1 it shows it here @ XDA, you only needed Haykuro SPL and the 26I radio/
If rec mode is working then you arent brick or if you can get into bootloader.
how do i get in rec mode or bootloader
Hold down home when turning on the phone=recovery
Hold down camera button while powering on= bootloader
If you can't get into either one of those, likely bricked. I know with WM devices flashing a radio for another phone is one of the fastest ways to brick your phone, Android seems to be much more forgiving, so hopefully you will be lucky and if recovery and bootloader don't work, you can possibly get ADB to work.
If you don't figure out how to do this BEFORE you do it, you will likely brick your phone, if not sooner, soon enough. Doing it along with a video isn't enough to make sure you won't brick your phone.
Read through the steps of rooting, flashing a basic, stock ROM, do that a time or two, and then get into the more up-to-date stuff.
Your method of going about a new task is going to... well, it isn't going to work, unless you are really, really lucky.
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
crusader0071 said:
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?.
Click to expand...
Click to collapse
Just use the top three wipes available in Anon's recovery menu: Wipe System/Data (1st), Davilk Cache (2nd), Ext Partition (3rd). If you haven't partitioned your SD card into FAT32, Ext2, 3, or 4 and Linux-Swap, do so now with the Recovery menu. You must backup your fat32 first, because a total repartition will totally blank your data. Good luck!
crusader0071 said:
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
Click to expand...
Click to collapse
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
thanks for trying to help but....
hi thanks for your help but ...
i have partitioned the card via anons recovery flasher, i have set my 8gb to 96mb swap , 1.5gb ext2 and the rest is used for fat32.
i have also gone throught the menu and deleted / erased the top 3 as requested but when i install a new rom it still freezes on the g1 welcome screen? please help!
G1ForFun said:
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
Click to expand...
Click to collapse
hi i just noticed im using Hard Spl update at the moment ? how do i update to Haykuro?
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
crusader0071 said:
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
Click to expand...
Click to collapse
This is YOUR FAULT for NOT READING!!!!
You installed an SPL meant for an HTC MAGIC onto your HTC DREAM. It *CAN* be made to work, HOWEVER, you failed to read and understand what is required to actually do it safely.
SPECIFICALLY, you are stuck in boot mode 3 -- boot to recovery, and because you changed the SPL, your recovery partition is UNABLE TO BOOT.
You are BRICKED, and the only way out is to use a hardware interface called "JTAG", which requires you to disassemble the phone.
SPECIFICALLY:
You missed the part of that thread that says "MOD EDIT PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION".
I have no sympathy for you. That instruction is in big purple letters.
hi thanks for your info, do you know anyone or anywhere i can get my phone jtagged?
How could you mess it up with step by step instructions....lol...I am being dead serious....it doesn't get more clear than this.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
crusader0071 said:
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
Click to expand...
Click to collapse
Did you follow those steps when flashing the SPL? Did you even flash the radio before flashing the SPL?
It sounds like you have no idea what you did to your phone which is never a good sign (and usually means you shouldn't even be flashing custom radios/spl's/roms)
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
heres what you do
ive did this too lmao jus go here www*androidhustler*blogspot*com ( THE * ARE REPLACEMENTS FOR . BECAUSE I CANT POST A OUTSIDE LINK SO U GET WUT IM SAYING SWITCH THE * WITH A . ) THEN SCROLL DWN TO A POST CALLED THE 2010 HOW TO GET CYANOGEN LATEST. DO ALL STEPS AND DONT RUSH. IF YOURE G1 DOESNT BOOT UP PROPERLY THEN I QUIT THIS SHYT BRO. LOL FOR REAL AND IF U HAVE ANY QUESTION EMAIL ME AT [email protected]*COM
crusader0071 said:
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
Click to expand...
Click to collapse
Sigh....I would go buy another phone off Craigslist or something similar.
Next time...please read before flashing....Although I'm sure you will after the last mishap.
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
I know here in town...there are so many G1's up for sale around the $150 mark in really really nice condition.
That's where I'd be looking if I bricked my G1. Well...I'd be replacing it with a HD2 probably...lol
garok89 said:
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
Click to expand...
Click to collapse
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
details
Sleeepy2 said:
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
Click to expand...
Click to collapse
have you got contact details for ezterry? if so pm me please.
as far as i can see the jtag is still in testing?
This noob is in the UK anyways. Let him figure it out.
Wrong section, soft bricked his own phone and freaking out.
Please READ. You are from the UK so your English isn't bad. You have no excuse for not following instructions.
Ways to fix your phone:
1) motherboard replacement
2) JTAG (experts are not anywhere near you though)
3) buy a new phone
Mods please get this out of here
Started to root the phone went back to 1.5, worked fine, applied FlashRec.apk and Amon Ra’s Recovery Image installed all that correctly worked fine. Went to install a new radio and spl and applied spl and when i go to start the phone it gets stuck at the G1 boot screen. Tried to book into recovery mode nothing happens , tried to hard & soft reset nothing happens. Phone just stays stuck at the G1 left it on for an hour and still nothing. Please help in any way or ask for more info if need.
Thanks in advance.
if you flashed the danger spl before flashing the new radio, your phone got permanent brick and cannot be solved without JTAG or changing the motherboard.
OK- I have the same problem, except I flashed the wrong radio.
(I thought I needed to update it for a different ROM, but.)
No fastboot, no recovery-- If I hold down the trackball, the screen wont come on, but the blue LED does. Is that useful to me at all??
Can JTAG help me? or is there another way?
I was reading about mtty-- but i'm not sure if that'll work for my G1.
Anything to unbrick this--- I really need my phone for finals week which started to-day.
JTAG is your only option.
techn0crat said:
Can JTAG help me?
Click to expand...
Click to collapse
Yes
techn0crat said:
or is there another way?
Click to expand...
Click to collapse
No.. at least none known yet
techn0crat said:
I was reading about mtty-- but i'm not sure if that'll work for my G1.
Click to expand...
Click to collapse
MTTY is just a program to talk to the serial port; it is actually part of the JTAG solution as well .. but as mentioned it will not help you at this point in time.
techn0crat said:
Anything to unbrick this--- I really need my phone for finals week which started to-day.
Click to expand...
Click to collapse
JTAG.. but unless you live near me or one of the very very few others who are set up for jtag hacks.. and that person is confident enough not to make the main board of the phone one big solder blob [I am but I'm not sure if some of the others I've heard poke JTAG are as confident].. it will take you a large chunk of time to learn what is needed to make it work.. or longer than the finals in the mail.
Thus I recommend.. get a cheap phone at the stand at the mall.. and pass your finals before worrying about the brick.
Since everyone who has caused a brick has either (1) not properly followed the directions and warnings.. or (2) did something in haste missing an important step; it will be no good to race it together during finals.
this dream was sent to my friend as a replacement
never used
he gave it to me sayingit wont boot
it gets into fastboot
it says:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
so i formatted his sdcard, got the DREAIMG.nbh put it on his sdcard, entered into fastboot, and it ran the install (rainbow screen) nothing was happening from there before i copied the DREAIMG.nbh to it, so at least this installed successfully)
then i rebooted (call-menu-power at same time) and still stuck at G1 screen after twenty minutes...whats happening here, anybody?
tnpapadakos said:
then i rebooted (call-menu-power at same time) and still stuck at G1 screen after twenty minutes...whats happening here, anybody?
Click to expand...
Click to collapse
Odd, the nbh files usually flash a full system.. thus while they might leave you with a rom you don't wish to have they usually will boot afterwards. You did let it fully flash all the partitions correct?
What nbh did you find/flash?
And. Can you still enter the spl or recovery.
ezterry said:
Odd, the nbh files usually flash a full system.. thus while they might leave you with a rom you don't wish to have they usually will boot afterwards. You did let it fully flash all the partitions correct?
What nbh did you find/flash?
And. Can you still enter the spl or recovery.
Click to expand...
Click to collapse
RC29 from the cm wiki, flashed successfully, nothing but fastboot screen, no boot, no recovery boot
weird
tnpapadakos said:
RC29 from the cm wiki, flashed successfully, nothing but fastboot screen, no boot, no recovery boot
weird
Click to expand...
Click to collapse
lol, wtf? wait... don't some phones need a goldcard for this?
r3s-rt said:
lol, wtf? wait... don't some phones need a goldcard for this?
Click to expand...
Click to collapse
yeah i dont know, all i know is i can ONLY getinto the bootloader, which is the ORIGINAL bootloader (0.95.0000)
what can i do with this thing?
what do i flash to it (cause it aint the RC29 DREAIMG.nbh)?
i refuse to lose
well only bootloader means nothing. you cold be getting a bad .nbh and the recovery partition could have something nasty on it. both of those not working doesn't automatically make it a brick. a working bootloader says everything is ok.
set up fastboot and fastboot a new recovery image.
then see if your recovery works. next time i don't respond, feel free to pm me again, lol. i really have a hard time keeping up with where i post.
of course: you can also fastboot a new spl:
http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I recommend:
EngBootloader_v2_NoSigCheck.zip
That way you don't have to mess with that nasty danger spl and then you actually will be bricked.
hi,
my friend tried to root his g1 and somehow he got it stuck on the bootloader screen. It just stays there and does nothing.
I have no clue what to do and he let me have the phone.
I was just wondering if someone can tell me what to put onto my sd card to get it up and running. thanks so much!
hi there hope this helps follow this guide and it will help. hope all goes well.
http://forum.xda-developers.com/showthread.php?t=463779
Thank you, i will check it out.
your welcome. anymore help just ask. there's a lot of people here on XDA that would be gladly to help out. Some of them have great experience with the G1 and many others android phones. if that file don't work for you, this one will truly work its the one i use if i get into any trouble like your self, i been there. sometimes its stays on booting and this don't work i use this one.
http://www.megaupload.com/?d=EMY1HIVU and just follow the same direction as the last site i gave you.
For some reason i cant get into boot loader mode... any ideas?
did you press camera button and power button just like that. fist step camera button second step power button at same time. but before you do this phone needs to be off to get into boot loader mode. you need to place the image on the root of the sdcard thats in no folder at all, in the root of the sdcard.
What i did is i pulled out the battery, put the sd card in and then put the battery back in. Next I held down the camera key and then I pushed the power button. I have not let go.
sould i let go next time?
this is what you suppost to follow http://www.youtube.com/watch?v=ckbsFRnVciE . tell me something can your phone power on the g1 boot screen. can you tried for me power and home and tell me what you see. thanks.
It will not do anything. it is just stuck on the g1 screen.
I asked my friend what he used and he said Anon recovery rom and hard spl
probably the phone is bricked. write every single step you remember you took on trying to root your phone maybe i can get something out from there. its hard to brick one of this phones. to use amon recovery and hard spl your phone need to be downgraded with rc29 by using the file in the website i posted.
rhonal89 said:
probably the phone is bricked. write every single step you remember you took on trying to root your phone maybe i can get something out from there. its hard to brick one of this phones. to use amon recovery and hard spl your phone need to be downgraded with rc29 by using the file in the website i posted.
Click to expand...
Click to collapse
He said he did not downgrade it. he went straight to the spl and this is what happened.
he needed to downgrade the phone from stock before doing those steps. it aint that easy. probably he bricked the phone somehow.
enferrari said:
He said he did not downgrade it. he went straight to the spl and this is what happened.
Click to expand...
Click to collapse
He could not have flashed the spl straight onto a stock phone.. He's leaving something out, probably in the full knowledge that he did something stupid.
Anyway, if you can't get into bootloader with cam+power of recovery with home+power, it's a brick. JTAG it if you're comfortable with that or if not, sell it to someone who is.
then mines possibly bricked! maaan this is such BS. i accidentally installed the wrong recovery image, then figured I redo everything again. I got it working again, downgraded to RC29 and flashed Amon Ra 1.7.0 image. After that I got too excited, I went straight ahead and flashed hard spl and complete Eclair rom right away. Then poof, stuck on g1 screen. Still is now, possibly brick right?
iLOSER said:
then mines possibly bricked! maaan this is such BS. i accidentally installed the wrong recovery image, then figured I redo everything again. I got it working again, downgraded to RC29 and flashed Amon Ra 1.7.0 image. After that I got too excited, I went straight ahead and flashed hard spl and complete Eclair rom right away. Then poof, stuck on g1 screen. Still is now, possibly brick right?
Click to expand...
Click to collapse
HardSPL should not cause a brick with the RC29 radio, unless you are mistaking HardSPL 10.95.3000 for DeathSPL 1.33.2005.. which did you flash?
goldenarmZ said:
HardSPL should not cause a brick with the RC29 radio, unless you are mistaking HardSPL 10.95.3000 for DeathSPL 1.33.2005.. which did you flash?
Click to expand...
Click to collapse
I flashed with hardSPL. but isnt the steps i did correct? or did i skipped something? i haven't root my phone since last summer. so my brain was kinda fuzzy when i reroot my phone.
iLOSER said:
I flashed with hardSPL. but isnt the steps i did correct? or did i skipped something? i haven't root my phone since last summer. so my brain was kinda fuzzy when i reroot my phone.
Click to expand...
Click to collapse
You should've updated the radio before trying to run eclair, but that wouldn't cause a brick. Can't you get to recovery or bootloader?
goldenarmZ said:
You should've updated the radio before trying to run eclair, but that wouldn't cause a brick. Can't you get to recovery or bootloader?
Click to expand...
Click to collapse
Before this happen I can, but now I'm stuck on the g1 screen. I left it on all night and nothing. I still can't get into recovery nor bootloader. Any other suggestions? So tired too of staying up all night reading trying to figure this out
(Rogers HTC Dream)
Ok, so, i know this sounds ridiculous, and you may find yourself asking "WTF Was He Thinking?!?!?" But, was a late night, and i was quite possibly half asleep lol...
Ok, so, long story short, i have tried possibly every rom for the Rogers Dream, and majority of them didn't work for me, or atleast, if they did, not that well.... Cyanogenmod 6 worked ok, although it started to get slow pretty fast :/ Anyways, i had previously rooted and flashed my dream with the steps provided on cyanogen's wiki, but i had never updated the kernel or anything, so, i came to the conclusion that it was possibly my kernel that was un-allowing me to run most roms, so i decided to update my kernel using the steps here
"http://forum.xda-developers.com/showthread.php?t=831139"
Everything went well, kernel updated, wiped everything, except i accidently deleted my recovery.....but thought, no problem, i'll just follow the instructions on the thread, no biggie.....it said to download the "orange-1.58.73.2.nbh" and flash that......BUT... I Should have known that the Orange one was the one for T-Mobile!! But out of stupidity i didn't realize it and flashed it!! Now my phone won't boot up or Anything :/ when i try to boot into recovery OR Hboot, it shows the t-mobile startup flash, then shows an error with a triangle and a yellow exclamation in the middle, with a phone on it's side beside it!! :S
Did i completely mess up my phone?.... Someone please help!! x.x
I got a Rogers dream and I just push amonRA with adb. As for the exclamation screen, I think there is a key combo to bypass it. Something like volume up and power at the same time. I can't remember now the exact combination. Took a lot of Googling to find it, and if I remember correctly the dream has a different combo than the tmo did. But with this nexus one my memory has faded.
Sent from my Nexus One using Tapatalk
The orange nbh is orange not t-mob..
But has a eng spl so recovery is easy.. head over to my 2708+ radio thread and flash that, a 2708+ rom (most new roms support it and older ones the kernel in that thread will fix it.
Rogers if they are your carrier may cut wireless data there is a e911 wavier form to get around this search for it or ask the support person if they cut your data for detasils.
The good thing about using the 2708+ radio/kernel is extra ram, and it works on the rogers dream the same way as the non rogers dream thus you can ask more people to help support you with 2708+
Thanks for the reply guys,
ezterry:
thanks for replying, would had posted in your thread but didn't want to jam it full of even more posts of someone needing help lol...
as for your reply, it was after i had flashed the orange nbh that i was getting the t-mobile splash :S thus i assumed it was t-mobile.... but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck.....i tried using the usb cord to access adb through it, but on the comp it says there are no adb devices, i'm assuming it's because i can't get past the "no sim card" screen to enable debugging ..... Any suggestions?
Thanks!!
I'm going to hope you are doing something silly since your description indicates no problem with the phone.
SpawnOfSatan said:
but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned
Click to expand...
Click to collapse
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
SpawnOfSatan said:
, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck..
Click to expand...
Click to collapse
I don't recall if adb is enabled by default on the orange rom; regardless this is the rom. (putting a sim card active or not in the phone may let you get further however ought not be necessary )
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Powering on when holding 'camera' is supposed to always bring you to the HBOOT screen; then pressing send or back as prompted will let you to the Fastboot screen (don't re-flash the orange NBH, say no if it asks)
Alternatively either booting with send or back will go directly to HBOOT.. (The rogers [2000 series] dream uses Send while the t-mobile (100 series) users Back but some SPL only provide the back options regardless of dream model.. I don't recall about 1.42.2000 so you will want to try both)
In theory Home is the only button to send you to recovery.
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
Click to expand...
Click to collapse
Ahh ok lol, i'd installed RA recovery when i first got the phone, so it was the only recovery screen i remembered ever seeing, thus why i was confused, but yah, hit alt+L and saw the options, but yah, not that many :/
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Click to expand...
Click to collapse
Apparently was entering it wrong, i was used to using Home+Cam+End to enter hboot.....so that's my fault....
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
Click to expand...
Click to collapse
[/QUOTE]
When i enter hboot, it looks like a friggin rainbow now lol....red, green, blue, and white bars as the background :/ and once in hboot, it says "Serial0" in the middle of the screen :S and when i plug it into the computer, i tried hitting both back, and send, and it makes the "Serial0" dissapear, but seems no matter what i do, it won't show the phone as a connected device in fastboot :S
Thanks again for replying soo quickly and all the help u've been giving me, any advice on where to go from here or getting it to enter fastboot?
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
hey if you are still getting that screen with the yellow triangle and '!' that means you have stock tmobile recovery with no rom lol can you try to press (alt+L) hold alt and press L should make a list pop up.. if it does than maybe you can still re root it so than it will read your sim... but im not sure if the rogers G1 has and different software so it could possibly make it worse.. lol just a suggestion
ezterry said:
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
Click to expand...
Click to collapse
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
SpawnOfSatan said:
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
Click to expand...
Click to collapse
that sounds like stock 1.5 firmware to me
..Still have yet to find a solution....any help please?
info again is
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Background:
Accidently wiped rogers rom + flashed t-mobile rom, and since then,
Hboot says "Serial 0" and won't allow me to flash any images, phone doesnt have a recovery, will boot up now, but only to the android set-up process which i can't continue with because it won't accept my rogers sim card, despite the fact i unlocked the phone before all this happened :/ so i can't sign in to or create a google account. Have attempted every bypass to get past it with no success. Obviously since i can't get past it i have no access to adb...
Please help
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
BeenAndroidized said:
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
Click to expand...
Click to collapse
Thank you for your response, unfortunately i have tried that countless times with no luck it says it cannot read or flash or something, i forget what it says Exactly but it wouldn't allow it x.x any other suggestions?
I'm Really desperate x.x and i have been having the crappiest luck lately. I bought a phone off kijiji today, spent 3 hours trying to meet up with the guy to buy it, then when i did get it (after all the running around) i took it to "The Source" to get it activated in my name , and after 4 hours (5pm-9pm) they finally said they tried everything but couldn't do it because the phone is registered to someone with a contract that has a suspended account do to owing an outstanding amount of money!!
At this point, when you boot up the phone. What do you see?
BeenAndroidized said:
At this point, when you boot up the phone. What do you see?
Click to expand...
Click to collapse
It loads up to the setup screen, in which i cannot bypass...i have tried with another active (with data) rogers sim, telus sim, and virgin mobile sim card, but none of them will work....and like i previously mentioned, i unlocked the phone prior to all this happening :S
OK! I am not sure why it will not let you activate your phone. But don't worry about that ATM.
Let try activate your G1 over wifi. Follow the instruction from the link below.
http://theunlockr.com/2010/01/10/how-to-activate-the-g1-without-a-data-plan-or-sim-card/