How to Unroot From One-Click - G1 Q&A, Help & Troubleshooting

One click is a little unstable for me. Flashed Cyanogen and went to black screen. Did a couple stuff and now im on cyanogen 4.0.3.
How do i unroot

follow this

david1171 said:
follow this
Click to expand...
Click to collapse
I read the whole thread and is it post #1 or post #111? Or is the same thing? sorry I'm a super noob

4.03 did not boot on a lot of devices so it was updated to 4.03.1 to fix the issue now we have 4.04 so load on that and wipe and flash 4.04 if you do not have a card reader you can acess your sd by going into recovery console typing ums_ enable to mount your sd and when you are done type ums_disable to unmount, type reboot and hold down your camera and power buttons to get into recovery and flash

If you really want to unroot find the dreaimg.nbh rc29 fot the us and rc7 for the uk and elsewhere, put it on the root of your sd and reboot, hold camera and power to acess the bootloader and it will flash the factory software, than just wait for the ota update to take you back to the latest software, could be up to a day or 2 to get

gridlock32404 said:
If you really want to unroot find the dreaimg.nbh rc29 fot the us and rc7 for the uk and elsewhere, put it on the root of your sd and reboot, hold camera and power to acess the bootloader and it will flash the factory software, than just wait for the ota update to take you back to the latest software, could be up to a day or 2 to get
Click to expand...
Click to collapse
I flashed DREAIMG.nbh And now im at the lowest firmware. I Have waited a day and still hasnt updated it. Is it possible that they Stopeed updating it.

Sometimes it can take DAYS. If you want Cupcake now, click on the link in my sig. You'll reroot soon though... you can't stay away from all the advantages.

Related

Nothing is happening when i press power button for bootloader!

Im trying to get RC29 on my phone, i just got a g1 today from ebay so i dont hve a data plan yet.I have RC30 i think sonce <enter>reboot<enter> doesnt work.Ive been readin on here for a while and dont know what to do since RC29 in on the sd card.When i press the power button(red) nothing happens while in bootloader.
Plez Help!
are you sure that you extracted the dreaimg.nbh from teh rc29 package and than put the .nbh on the main folder of your fat32 partition sdcard
dragonreapa69 said:
are you sure that you extracted the dreaimg.nbh from teh rc29 package and than put the .nbh on the main folder of your fat32 partition sdcard
Click to expand...
Click to collapse
Yea im sure i put the dream thing right in the sd card i just formated(fat32) then put the card in my phone and when i get in bootloader it checks and finds nothing.There are dashes next to dreaimg.nbh, bootloader,boot,etc
what do you mean there are dashes?
dragonreapa69 said:
what do you mean there are dashes?
Click to expand...
Click to collapse
Dreaimg.nbh-
Bootloader-
boot-
etc...
Press power to update
press action to cancel
Thats all it says. When i press the power button nothing happens though.
it might be a bad download, try to redownload and unzip it again and then put the new one on the card and try again
dragonreapa69 said:
it might be a bad download, try to redownload and unzip it again and then put the new one on the card and try again
Click to expand...
Click to collapse
ok i tried 3 dls from differnt places and im still getting the same thing.Can i try flashing a spl or radio first?Oh i have a PVT board to.
if you are not rooted then you can not flash a radio, spl or rom unless it is an official rom
what exactly are you doing?
what does your bootloader screen look like
try the updated one click root on that bad boy, supposed to work on all android builds, here is the link
http://zenthought.org/content/project/flashrec
then you can use this recovery image for it
http://forum.xda-developers.com/showthread.php?t=566669
gridlock32404 said:
if you are not rooted then you can not flash a radio, spl or rom unless it is an official rom
what exactly are you doing?
what does your bootloader screen look like
Click to expand...
Click to collapse
It looks like a rainbow then goes to a grey screen with blue words on it.Rainbow screen says this:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Sep 2 2008
Im trying to get jacxheroski rom on my phone.I have a unrooted g1 with 1.5 update.
try the one click root i just posted above you
gridlock32404 said:
try the one click root i just posted above you
Click to expand...
Click to collapse
That would work but adb dont work and i dont have a data plan.
are you stuck on the login screen, how wouldn't that work, all you need are those files that i just posted the links to
gridlock32404 said:
are you stuck on the login screen, how wouldn't that work, all you need are those files that i just posted the links to
Click to expand...
Click to collapse
I cant install a apk or recovery without having root, im trying to flash RC29 first but cant since it doesnt show up,i cant push the update with adb because its not working for me on win7 X64.i tried to log but it didnt work.I tried home+power i just got normal boot though..Do i rename that recovery image as update?I did a factory default before i started to root process, so i could get rid of the user info from the previous owner.
umm, you don"t need root to install an .apk just use any file manager to do it, you can"t fastboot anything without root and you can"t flash a recovery like a rom
this will give you more of an idea of what is goin on
http://forum.xda-developers.com/showthread.php?t=563679
gridlock32404 said:
umm, you don"t need root to install an .apk just use any file manager to do it, you can"t fastboot anything without root and you can"t flash a recovery like a rom
this will give you more of an idea of what is goin on
http://forum.xda-developers.com/showthread.php?t=563679
Click to expand...
Click to collapse
Oh my bad i thought fast boot meant camera+power. I borrowed my moms sim cacrd to activate my phone now.
camera + power means the bootloader but it is also fastboot if you have either the hardspl or the dangerspl
Now im starting the one click root
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/

I think my G1 is bricked.... but.. maybe you can help

I Rooted my G1 everything went fine....... then I updated to a CM with out flashing using Telenet........ now my G1 is stuck at the G1 screen.... any ideas?
YoungOP said:
I Rooted my G1 everything went fine....... then I updated to a CM with out flashing using Telenet........ now my G1 is stuck at the G1 screen.... any ideas?
Click to expand...
Click to collapse
Can you get to the Recovery by taking out the battery, then holding home+power? If so, put the update on the root of your SD, go to the Recovery, wipe, then update. Let me know what happens.
The only ways to brick a phone is to interupt a flash, or flashing the SPL before the radio. If you can enter recovery or fastboot you can recover the device. But we need more information in order to help you with your specific problem.
BlackElvis79 said:
Can you get to the Recovery by taking out the battery, then holding home+power? If so, put the update on the root of your SD, go to the Recovery, wipe, then update. Let me know what happens.
Click to expand...
Click to collapse
That worked... so im fine for now.... but im going to take another shot using this guide this time....http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
nevermind
..........

FROYO!!!

have a question if i download the non rooted froyo update and manully update it will i be able to go back to 2.1 update 1 somehow ...
i have a tmobile google nexus one running 2.1 update 1 ere27...
xghostyxjokerx said:
have a question if i download the non rooted froyo update and manully update it will i be able to go back to 2.1 update 1 somehow ...
i have a tmobile google nexus one running 2.1 update 1 ere27...
Click to expand...
Click to collapse
before it gets moved want to reply yes you can you have to download the passmg if you dont know what that is ill provide the link basically u download that put it on ur sdcard go into the bootloader hold the trackball then power -> go to bootloader and it will automatically detect it and you can either click yes or no to flash it I have the ere79 or something like that it autoupdates to ere27 after booting up
nabzilla1990 said:
before it gets moved want to reply yes you can you have to download the passmg if you dont know what that is ill provide the link basically u download that put it on ur sdcard go into the bootloader hold the trackball then power -> go to bootloader and it will automatically detect it and you can either click yes or no to flash it I have the ere79 or something like that it autoupdates to ere27 after booting up
Click to expand...
Click to collapse
can i please get the version to go back to 2.1 update 1 from froyo and also the stock unrooted froyo rom please!!!
http://www.4shared.com/file/LIYpuuKa/PASSIMG.html
http://www.4shared.com/file/XyxLITju/signed-passion-ERE27-from-ERD7.html
http://www.4shared.com/file/rExgI9bu/signed-passion-FRF50-from-ERE2.html
NOTE THIS PROCESS WILL UNROOT YOUR DEVICE
1. First put the PASSIMG.zip on ur sd card make sure your sdcard is fat32
2. Turn off your device
3. hold the trackball and press the power button should take you to a white screen (bootloader)
4.hit the power button it should start scanning the zip to make sure its ready to flash
5.follow the on screen directions to start the update
6. reboot you should have ere79 or something you can let your phone auto download ere27 or use the file I uploaded follow these instructions to manually update all the way to froyo........ http://www.androidcentral.com/how-manually-update-your-nexus-one
nabzilla1990 said:
http://www.4shared.com/file/LIYpuuKa/PASSIMG.html
http://www.4shared.com/file/XyxLITju/signed-passion-ERE27-from-ERD7.html
http://www.4shared.com/file/rExgI9bu/signed-passion-FRF50-from-ERE2.html
NOTE THIS PROCESS WILL UNROOT YOUR DEVICE
1. First put the PASSIMG.zip on ur sd card make sure your sdcard is fat32
2. Turn off your device
3. hold the trackball and press the power button should take you to a white screen (bootloader)
4.hit the power button it should start scanning the zip to make sure its ready to flash
5.follow the on screen directions to start the update
6. reboot you should have ere79 or something you can let your phone auto download ere27 or use the file I uploaded follow these instructions to manually update all the way to froyo........ http://www.androidcentral.com/how-manually-update-your-nexus-one
Click to expand...
Click to collapse
could you like describe each link to me...also i have a non rooted phone running 2.1 update 1 please note this...will this still work???
ok for you all you have to do is update to froyo so step 6 and use the frf50 update and update manually using these directions....
http://www.androidcentral.com/how-manually-update-your-nexus-one
nabzilla1990 said:
ok for you all you have to do is update to froyo so step 6 and use the frf50 update and update manually using these directions....
http://www.androidcentral.com/how-manually-update-your-nexus-one
Click to expand...
Click to collapse
how do i go back to version 2.1 update 1?? from froyo on my stock n1
start from step one and use the ere27 from 79 update after you use the passmg
nabzilla1990 said:
start from step one and use the ere27 from 79 update after you use the passmg
Click to expand...
Click to collapse
is there a video tuturial on this???

[Solved] Nexus one stuck on Colored X

hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Ok let me tell you if u have the same problem than do as the steps..
i had this problem after googling long time i found this solution ..
1st check ur hboot 0.33 or 0.35??
my hboot is 0.35.0017 and i am on froyo 2.2 stock is FRF91.
just download the PASSIMG for FRF91 from
http://shipped-roms.com/download.ph...on_KT_KR_2.15.1010.2_FRF91_release_signed.zip
after download rename it "PASSIMG.zip" than put it on root of sd card..(formatted by fat32)
now put phone is bootloader mode by pressing vol up + power button
than fastboot verifies passimg file and ask you to flash this rom
now press vol up (yes)
than wait for 5 min to flash this rom on ur nexus one..
reboot and wait for 5min and it and done...
if u still not boot normal than again go to boot mode
select recovery
when u see trangle logo and android than press vol up +power buttong
than recovery menu show up
than wipe user data
and wie user catche
reboot
done..
swapniladsure said:
hey guys
My nexus one is stuck on 4 colored X logo.
last night i was downloading apps from market and battery get discharged and phone get off..than i connect the charger and power on phone than it show me 4 color X on screen only..
i have tried clear storage but no work..
can any body tell me how to solve this problem ..
my nexus one is on android 2.2 n bootloder is 5.08
help me soon and thank you in advance
Click to expand...
Click to collapse
Have you tried booting into recovery? Power+volume down...
Did you try to boot without the SD card? It helped me once.
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
i cant able to access recovery mode
Hollow.Droid said:
Assuming you are running a custom recovery image, go to it via the bootloader menu (Turn phone on while holding volume down, then navigate to recovery using the volume buttons and selecting recovery using the power button). You should then be able to flash the same ROM you currently have installed. If however this is a completely stock device then you could run PASSIMG.zip via the bootloader to save your current install. If you need more info just ask
Click to expand...
Click to collapse
hey friends..
i can access bootmode but when i select recovery option by selecting power button than phone get restart and shows 4 color X again...
than i have flash to recovery "RA nexus one v2.1" to install custome rom...
but same it get restart when we select recovery option
help me what to do
Wipe everything and see if that does it.
Carloswithac said:
Wipe everything and see if that does it.
Click to expand...
Click to collapse
how to wipe??
where is wipe option...let me tell u that i cant able to access recovery menu ..without recovery menu i cant wipe or flash the phone??
is that true?
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
i cant able to access recovery
rugmankc said:
If you can flash a rom use 2.1.1 not 2.1. Assume you are doing that thru fastboot from pc.
Also, try the 3 finger reboot to get to recovery.
Hold down pwr/vol-/trackball at sametime until phone boots into bootloader, then navigate to recovery option. Then wipe all and restore a good bu. If this happened while dl'ing apps, one may be bad. Get all of them off phone and do one at a time.
Ken
Click to expand...
Click to collapse
dude i cant able to access recovery menu...
when i press power button to get in recovery menu my phone get restart ....and stuck on 4 color X logo...
is there any solution to access recovery menu?? ..my phone get restart when click on recovery on bootloder
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
rugmankc said:
Ok, understand now.
You may have some options thru fastboot and the pc. Do you have SDK installed on pc. I am not good at that, someone else may have suggestions along those lines. Unless, as I asked, you already have used that method to flash amon ra 2.1.
If you can thru fastbboot with SDK I would still flash amon 2.1.1
Ken
Click to expand...
Click to collapse
i have flash recovery file of amon 2.1.1 but after flash recovery problem not solved......it still get restart when i select recovery from bootloder mode...
help me
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
rugmankc said:
I am out of ideas, sorry
Someone will get you going
Sounds like you are using SDK, it may be the way to wipe and get back to an original phone state, then reupgrade. I don't know sdk very well.
Did you try the other idea of trying to get to recovery with sd card out of phone. If you do that you may want to back it up while out of phone if you have a sd card reader
Good Luck and wait for more help
Click to expand...
Click to collapse
okkkk
thanks
Why does this thread say solved??
Just restore a stock image.
Follow the wiki guide for unroot/restore. Use the passimg method, with the FRG33 zip, which can be found by following the link on the word "here" on step 2...
http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus
Sent from my Nexus One using XDA App
I see you solved it on another forum... :-/
Sent from my Nexus One using XDA App
Thanks for your input DR
The back to stock and passimage was where I was thinking he needed to go. But, know nothing about doing that without a lot of research of my own.
Anyway glad he got it--what did he do to fix
ken
Looks like he did exactly what I posted. Funny thing was, it was a thread on another forum, where I had suggested the same thing to someone else, and he'd picked up the trail... xD
Sent from my Nexus One using XDA App
Glad he got it anyway
THANK YOU
Thanks man you r great , i have spend 24 hrs on this but only your method works . Thanks again
really really thanks
you saved my 3000 bucks
Where can i find fastboot instructions?

Possibly Bricked Rogers Dream

OK so i had a HTC Dream with supergingerbread or something installed with
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
It drained battery while i was doing something at 4 hours, and 12 hours on idle and only on idle.
I decided to install superfroyo 2.6 but it gave me a error ( status 7 ) on my recovery.
I thought it might have been because of the SPL and RADIO so i tried to install DeathSPL and RADIO 3.22.26.17 and the guide i was following told me to install the radio first which i did. after i finished flashing the radio my phone told me to reboot and so i did. an android with a download bar showed up and in the next 5 seconds i could boot at all, stuck at rogers screen and fastboot or recovery wont boot up.
At times tho i get passed the rogers screen but then all i get is a black screen and sometimes there bars going across the screen probably because it thinks i flipped the screen or something ( accelerometer is acting up =/.
any help would be appreciated like maybe a cheap jtag place nearby toronto thats cheap or maybe even a more dangerous/less reliable option since i have nothing to lose =/.
thank you
I know you mentioned that it won't go into fastboot (back+power). Just want to know. What happends when you hold camera+power buttons? Will it come up with the other screen?
no that doesnt work, i tried every button + power, all i found out is that the mysterious black screen comes up sometimes and if i do trackball + power, the screen goes black with a blue LED.
Here is some info I found. See if it works.
if you are willing to lose almost everything on your phone that is installed on your internal memory then...
1. Turn the G1 off. If it’s frozen on, take the battery out and put it back in the unit.
2. Hold the Home and Power keys down at same time for about 25 seconds. You will see a yellow triangle screen with exclamation point in the middle.
Now to wipe the device clean:
3. Press Alt+L.
4. Press Alt+W for a factory reset.
5. Press the Home and Back keys again for about 25 seconds.
The device should then reset again and the hard reset is complete.
Click to expand...
Click to collapse
tried it 3 times and no luck
Which guide did u follow? Try asking on ezterry's thread? Just wonder if the radio spl are compatible. Confused as to why u did that
Sent from my Dream/Sapphire using XDA Premium App
Taken from : http://wiki.cyanogenmod.com/index.php?title=Dream:DangerSPL
Prerequisites
A rooted G1/Dream
Amon_Ra Recovery
The following files on the root of your SD card:
A compatible radio for the device version:
2.22.23.02 T-Mobile / US*
2.22.19.26i Non US (md5: aeecdb49b74a0d4bb67f9d8af70c1889)
3.22.26.17 or 3.22.20.17 Rogers/Orange
DangerSPL
DangerSPL
Flashing Radio
Amon_Ra's Recovery process
Boot into Recovery by holding the Home and Power button while the device boots
Scroll down to Flash zip from sdcard
Select the Radio update.zip
The HTC Dream will reboot during this process
Once the installation has finished, select Reboot system
ClockworkMod Recovery process
ClockworkMod Recovery is not recommended for the Dream. Please upgrade to Amon_Ra.
Flashing DangerSPL
Boot into fastboot by holding Camera
Double Check that you have a compatible radio or you will brick the device!
Press Send+Menu+End to reboot
Boot into recovery by holding Home
Select Flash zip from sdcard
Select the DangerSPL update.zip
It will install and then ask you to reboot to finish the installation. Reboot as prompted at the bottom of the screen. This will finish installing DangerSPL and reboot back into recovery so you can flash CyanogenMod.
johnson8cyl said:
Which guide did u follow? Try asking on ezterry's thread? Just wonder if the radio spl are compatible. Confused as to why u did that
Sent from my Dream/Sapphire using XDA Premium App
Click to expand...
Click to collapse
i already sent him a pm to ask him kindly if he could jtag my phone, didnt put a price on it and i hope he doesnt ask for one either =/.
anyway even if the spl and radio were compatible whats the use, the phone only boots up sometimes ( like 1 in 5 tries or something ) and when it does all it is is a black screen.
Bump, out of sadness ='(
Do me a favor and try to to these and see what happens. Turn off each time and do it.
home+power, hold for about 25 sec and release.
camera+power, hold for about 25 sec and release.
back+power, hold for about 25 sec and release.
call+menu+power, hold for about 25 sec and release.
Also try them with SD card out of the slot, and also with SIM card out of the slot.
Let me know what happens.
@beenandroidized . I noticed that you got the same hboot and radio i was attempting to put on my g1.but now it won't boot up . Recovery and hboot still work and I know the problem is cause when i flashed the hboot it turned s-on on my g1. Do you know how to change it back to s-off ?
Sorry, I could not begin to tell you how to change it. Originally, I went I first rooted my G1 with instruction I found by googling, my G1 was at S-OFF. But after the ROM I had crashed on my and I had to reflash everything, my G1 is on S-ON. My guess it was the "Generic G1 ROM w/ Root" that I flashed at the time that changed it to S-OFF.
codey895 said:
@beenandroidized . I noticed that you got the same hboot and radio i was attempting to put on my g1.but now it won't boot up . Recovery and hboot still work and I know the problem is cause when i flashed the hboot it turned s-on on my g1. Do you know how to change it back to s-off ?
Click to expand...
Click to collapse
Just download the 2005 engineering spl in ezterry's thread and flash in recovery to get s off. But u will lose the 14mb of ram u gained
Sent from my Dream/Sapphire using XDA Premium App
BeenAndroidized said:
Sorry, I could not begin to tell you how to change it. Originally, I went I first rooted my G1 with instruction I found by googling, my G1 was at S-OFF. But after the ROM I had crashed on my and I had to reflash everything, my G1 is on S-ON. My guess it was the "Generic G1 ROM w/ Root" that I flashed at the time that changed it to S-OFF.
Click to expand...
Click to collapse
Rom doesn't change security. The spl does
Sent from my Dream/Sapphire using XDA Premium App
BeenAndroidized said:
Do me a favor and try to to these and see what happens. Turn off each time and do it.
home+power, hold for about 25 sec and release.
camera+power, hold for about 25 sec and release.
back+power, hold for about 25 sec and release.
call+menu+power, hold for about 25 sec and release.
Also try them with SD card out of the slot, and also with SIM card out of the slot.
Let me know what happens.
Click to expand...
Click to collapse
never tried taking the taking the sd card, sim card, or call+menu+power but i will try it, i thank you guys for all the support.
i will get to this in 2 - 3 hours since im currently at school.
johnson8cyl said:
Rom doesn't change security. The spl does
Click to expand...
Click to collapse
Sorry, still learning all this while trying to help other in needs.
bloodman376 said:
never tried taking the taking the sd card, sim card, or call+menu+power but i will try it, i thank you guys for all the support.
i will get to this in 2 - 3 hours since im currently at school.
Click to expand...
Click to collapse
Just something I found while I was googling on the subject. For some reason some one had mentioned that SD card gets corrupted and it can cause the phone to do that. And that was how they fixed their problem. Never hurt to try.
BeenAndroidized said:
Sorry, still learning all this while trying to help other in needs.
Click to expand...
Click to collapse
No need for sorry at all. I learned it too. Just filling u in.
Sent from my Dream/Sapphire using XDA Premium App
No luck as usual... =/
bloodman376 said:
No luck as usual... =/
Click to expand...
Click to collapse
No luck for what method?
Did you tried
johnson8cyl said:
Just download the 2005 engineering spl in ezterry's thread and flash in recovery to get s off. But u will lose the 14mb of ram u gained
Click to expand...
Click to collapse
If you flash a radio or SPL from recovery in that the new combo is unable to boot the current recovery you get stuck in boot mode 3 unable to boot the phone, get into fastboot ect.
This is why fastboot was the recomended way to install 2708+ radio, SPL, and recovery.. it allowed for a safe way to go from any radio/eng SPL to the new stack.
I've never seen the 3.22 radios is an update.zip in the wild, but if you used one to go from a 2.22/ebi0 recovery to a 3.22/ebi1 recovery, but the ebi0 recovery still installed, you are likely now bricked.. only hope is recovery is not reconized and let's you access fastboot commands with the USB wire attatched (even if you are stuck on the splash screen)
My jtag method will repair this.. but I havn't jtagged a phone in a while and its become a boring long painful process. Not including the time for you to get the phone to me and for me to get it back to you. Its proven not worth it on my part.

Categories

Resources