Hi.
If you need Finnish or Swedish keyboard layout for your Touch Pro download it here.
Install to device -> soft reset.
- ä = Fn + a
- ö = Fn + o
- å = Fn + p
IMBA! ill try it out now
Thats for t9. It does not help making the Hardware keyboard make åäö.
Im using Nrg Rom and if your nor suplied with the swedish flies this does not work...
t9 works fine thoe. but nothing allse.
The hardware keyboard is a easy regedit to make it swedish,
HKLM\HARDWARE\DEVICEMAP\KEYBD\
Change CurLang to 1044 and softreset for swedish hardware keys.
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
no problems for me using the same rom, you did install the touch pro keyboard cab right?
jimmyhawkin said:
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=430208&highlight=hardware+keyboard
And use this tool to change the layout from a fuze rom keyboardlayout, to a "htc" rom keyboard
Or my newest creation: http://forum.xda-developers.com/showthread.php?p=3512681
Hi there m8. Even with your program it still does not help me. If you open upp my Phne and start using my Hardware keyboard with the nrg rom it wont make Ö when i do FN + O....
I just get a normal o.
So im not doing anything wrong and what it seems is that everyone does not understand that this is not the REGISTRY that is the problem. Or if the keyboard is set to fuzz or HTC keyboard.
It seems as if the Swedish files are not in Nrgs rom so ÅÄÖ wont show no matter what registry fixes you do.
So i think that what is needed is the Swedish files in order for this to work. NOT any registry fixes... Do you understand my problem now?
Cause i used your program. I have tried about 5 diffrent regfiles witch realy does about the same thing
and as i see your program is allso just a reg changer that changes the curlang 2 = 41d
Witch beliave me or not its set 2 and i still only get a o when typing FN + O witch should then become a Ö
what version of the nrg rom are you using?
i have ran 1.5, 1.6, 1.7 and 1.0 (1.8) and all of them are fully capable of running the Swedish hardware keyboard.
install the touch pro keyboard cab located in the nrg rom thread softreset, change curlang to 1044, softreset and thats it.
Im not sure what files you are after, i can´t recall that i have ever read about any language files for the hardware keyboard, T9 yes not not hardware keys.
if you are running the 2.x series im am fully willing to flash my rom and try the exact same think since im confident that it will work.
Please answer this question:
Did you or did you not install the touch pro keyboard cab for the nrg rom?
Use 2.0 and used the keyboard changer thats in the rom.
???
Hi.
I have used that cab with almost every EnergyROM version there has been (including betas) and that cab has always worked fine. I also tried one 6.5 version and this cab was not working with it - allthough, I did not try very hard...
Things I do:
- change regional settings -> Finnish
- change keyboard layout to Touch Pro
- install the cab
- soft reset
=> now it should work...
@6sto
Tried to do exactly what you wrote, but without success.
I am using EnergyROM Series 2.0 Build 32409
Ouch
Sorry to hear that it didn't work. I apologize but I can't help you any more with this. I hope we have much better helpers here in XDA-developers. Can you help with this issue? Everything is working OK with my Touch Pro!
---
Hey, have you tried this? http://forum.xda-developers.com/showthread.php?t=496876
I figured it out.
The danish keyboard layout and norwegian is the same. So if I choose norwegian it works
not sure what to say, just flashed the latest nrg 2.0 as i promised, changed keyboard with the provided tool, power cycled like i was prompted to do, changed curlang to 1044 and softreset, and now i have my Swedish hardware keyboard.
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
jimmyhawkin said:
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
Click to expand...
Click to collapse
Yes, i dont use T9 at all, only hardware keyboard.
Please write in detail what you are doing after you hardreset your device.
follow the steps like both i and others have written in this thread, dont skip any steps and it will work for you.
jimmyhawkin said:
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
Click to expand...
Click to collapse
you do change the regkey to 1044 in decimal value and softreset after you change the keyboard layout to touch pro right?
in the 2.0 all you need to do is change to touch pro keyboard and then change curlang to 1044 decimal value and softreset, that is it.
im not sure how to help you, i even flashed the 2.0 to test it for you, no problems at all, i honestly suggest you start looking at what you are or are not doing compared to the guides.
Follow the guides we wrote for you and it WILL work.
Good luck.
It is acualy as you say. If you direcly after installing the rom do as you say it will work. BUT here comes the tricky part.
What if you want both the hardware keyboard to work. And the t9?
Cause id realy like to have the phone as it is in the swedish vertion. Were both are working.
Cause as of now i know how to get either t9 or hardware keyboard working but not both.
Anyone that knows a solution to getting the t9 in swedish when you have hardware working?
Although i love my phone, sometimes it bugs me when sending messages or emails. I was wondering if there was an application out there that would allow me to either (temporarily) replace / swap arround the full screen keyboard for a standard cellphone looking like keypad (as in where you have to "press" the buttons multiple times for a letter) but would still support the "AT9" feature.
I used the search & found somethin like Finger Keyboard 2 but it does not support my native language dutch. The auther claims that the dutch language uses the same as english layout. However this is only partially true. The phone does come with a qwerty layout, but its the dutch (NETHERLANDS) that use QWERTY on keyboards. I myself am BELGIAN (dutch, totally different country) and we use the AZERTY layout on our keyboards. Although it are minute differences in the layout it still often leaves me searching for letters, symbols.
Can anyone help me ?
You might want to try this and see if it works but i cant say it will 100% but give it a shot.
http://forum.xda-developers.com/showthread.php?t=486227
Hello.
Can anyone tell me if it's possible to get æ ø å in the full qwerty keyboard. Im using Gen Y R4.4 and I believe it is Nikoan89 Rhodium Keyboard and Ezinput 2.1.
What annoys me is that the T9 dictionary dosen't suggest words like på, nå and small words with æ ø å and I have to hold a or o down to select the letters manually and then it suggests them. I've tried adding it to et9mywords but nothing changes.
So it would save me alot of time writing if I had the æ ø å on the actual keyboard and not having to press down a or o.
Thanks to all people contributing at xda and making it a great site. A late merry christmas folks and a pleasent new year
Regards Liquid211
the sip phonepad got t9 with full danish word guessing
try doing a search and trying it out
Thanks for your reply.
I have been using the phone keypad for a while but recently changed to full qwerty because it seemed logical when surfing and writing alt of url's.
It's way easier for passwords and email than phone keypad but the T9 just seems to use the dictionary in another way when using full qwerty. And from what i've read it is a bug in the whole keyboard package which has not yet been fixed. That's why the easier solution seemed to be getting æ ø å in the actual keyboard layout then it wouldn't be a problem.
I've been searching alot and I know that at some point it was able to have a nordic layout og the keyboard but those tricks dosen't apply to the new ezinput from Nikoan89.
Regards Liquid211
Hello all,
I have a G1 which, I assume, was originally German as the physical keyboard layout is QWERTZ instead of QWERTY.
I have set my Locale to Ireland and the Z and Y keys work as I would expect them on a QWERTY keyboard (I can ignore the legend on the keys) but my problem is the keys that need ALT pressing, they are mapped to, I assume, the Locale (Ireland) but the legends on the keys are not. So, If I press ALT and E the keyboard legend is the Euyo symbol but I get an underscore. I assume that on UK or Ireland QWERTY keyboards, the legend printed on the key is underscore.
Most of the time this is not a problem but editing documents or using terminal is a real pain!
Is there any way to change the mappings so the symbol I gewt is the same as the legend on the key (without changing my locale to Germany!)
Hope someone can help (by the way I am an Android Newbie having spent many many years on Windows Mobile) so please go easy on me!!!!!
Mike
anyone can help????
I personally have no idea how to do this but I think I can point you to the right people.
Check out these threads
http://forum.xda-developers.com/showthread.php?t=642518
http://forum.xda-developers.com/showthread.php?t=551344
PM original posters of either thread and they should be able to help you out.
Also, some alternative input methods on the market have the ability to map keys as well, you may want to look into it although I don't know which ones are good.
Good luck.
Hello! I am finally a new happy owner of a Galaxy Note!
Its not perfect, I think the Dell Streak was easier to use (very hard to hold it in left hand and NOT press Power, Volume Up/Down buttons).
Anyway - I have much more serious problem:
Any outgoing SMS message in hebrew, is seen as question marks by the recipient (even using another Android phone as well).
Only clue that I have is, when I finish typing the message and click on Send, I get Warning (Attention) as follows: "Message may be corrupted on recipient device. Change input mode to automatic"
I am not sure what this mean?
My other problem, is that no other keyboard (like Anysoftkeyboard, or Swype), seem to allow language swapping using the Spacebar - which I found very comfortable (and swype not supporting hebrew at all) - so I must find a way to incorporate Hebrew into the Samsung Keyboard please.
Another potential issue, is that I feel the Stylus might not be functioning correctlly - it requires more pressure than I am used to, with my Dell Latitude XT2, which I use to write all lectures and practice at uni - perhaps something is wrong with my pen? or is it right that I have to apply what I would define as "moderate" pressure for it to even register on the Note taker?
ok, I solved my own problem for SMS:
When in Messaging center, click Menu, then Settings and go to Input Mode - change it to Automatic.
Hope it helps others who search for this dumb default setting on GSM alphabet (why??)
Still having the problem with Hebrew for the Samsung keyboard to switch using Spacebar
how did u get the hebrew keyboard to work, as when i try to type in hebrew the keys are not displayed correctly
hykhleif said:
how did u get the hebrew keyboard to work, as when i try to type in hebrew the keys are not displayed correctly
Click to expand...
Click to collapse
I am using AnySoftKeyboard, with added Hebrew keyboard addon.
It works fine, keys are displayed correctly out of the box Samsung ROM.
that is so weird because I have also used anysoftkeyboard and the Hebrew addon but the characters are not displayed correctly at all.
Although I have the Arabic rom installed which has RTL support
very weird
hmm, mine does not have Arabic option.
Is there any chance the distributor in your country decided on his own to make Hebrew intentionally not work on their ROM? (unlikely, but not unimaginable...)
Your alternative is to reflash the ROM to one Euro version.
Go settings-->Application-->All-->Messaging-->Clear Data
Hope this helps.
I need to add Portuguese language to the Note II T889. I know the Note II N7100 has it on it. How can this be done? Anyone? There has to be a way to import the Portuguese Language if the N7100 has it on it??!!??