Sorry this was previously posted in the wrong forum, mis described as a tytn!
My son is unable to turn his tytn2 on, I think the battery has run down completely, as when I turn it on, I get the "smart mobilty" flash screen with the RGB data, then it turns off as if completely flat, when I plug the charger in, the led charging lighton the top of the phone does not light. At the moment I have tried removing the battery for a while to see of that "resets" it, I have also tried soft reseting but no joy yet.
Doing a bit of research, it looks like the fuse may have blown, I have emailed a repair company who have quoted £40+vat + £6 postage each way, which works out at £58, is the fuse the likely cause, could I get fixed anywhere else, looking on the htc manuals it would appear to definitely not be a diy fix (not for me anyway!)
Try charging from the USB cable plugged into a PC
Apk1 said:
I think the battery has run down completely, as when I turn it on, I get the "smart mobilty" flash screen with the RGB data, then it turns off as if completely flat, when I plug the charger in, the led charging lighton the top of the phone does not light. At the moment I have tried removing the battery for a while to see of that "resets" it, I have also tried soft reseting but no joy yet.
Click to expand...
Click to collapse
Sounds very familiar so far... no blown fuse involved here however, it was a blown HTC supplied original mains power supply unit in my case - the light on the power supply stopped working also. Although I could have had this replaced for free under warranty, I didn't want another of the same type (which is all HTC said they'd provide), so I splashed out on an £8.99 Power Supply from a company based in Aylesbury. It has a shiny black plastic case (nicely matching the TyTN II case), works at both 110 and 230 Volts and came with 4 interchangable mains socket adapters for use with different mains sockets around the world. Before you rush out to get another PSU however, check if the light on the power supply still works. Will the phone charge if you connect it to a PC via the USB cable and does the phone light come on in this case (note that the phone doesn't need to be powered on to charge the battery this way, as long as the PC it's connected to is up and running)? If not, you may have a damaged USB port on the TyTN II and although this can be repaired, if it's out of warranty, a repair centre would need to do the work if you're not handy with that sort of thing. HTC have a repair depot in Kingston, Milton Keynes that should be able to do this sort of thing. Depending how your results go with the above tests, you could give them a call, the number is in your manual.
I have tried 2 chargers + the usb, no lights on phone, if I plug in my TP2 it charges correctly, so I think the fault is with the phone, it is now getting as far as the windows screen then dying (presumably after standing for a day or so the battery has recovered enough to go a little further) so the fault would appear to be somewhere in the charging circuit.
Options, options
Apk1 said:
the fault would appear to be somewhere in the charging circuit.
Click to expand...
Click to collapse
Which includes the USB port on the bottom of the phone. Have a careful look for any bent or broken pins there. It's also worth searching here on xda-dev for broken Kaiser USB port threads because this is a topic which has been posted about many times.
If you don't want the expense of getting the phone repaired and can make do without a working USB charging port, you can always buy a Kaiser charging cradle that comes with an additional battery bay to use as a spare charger then just use the battery bay to charge a spare battery and swap them over when reqd. You could also use bluetooth for Activesyncing (buying a bluetooth dongle for the pc to be synched with if needed).
My sons 8925 did the same thing.. and even though his USB looked to be "perfect" it was the problem... It stopped taking a charge from it.. out "work around" involved ordering one of those phone docking stands which had a seperate battery charger and an extra battery or 2.. Then he just had to swap batteries when one died and charge it in the stand.. We did a 3 battery... 1 for in the phone, one for in his wallet so he had one to swap anywhere, and 1 for in the charger.. it worked well (and he is a heavy user of the Wifi and GPS and such)..I hope this helps you out!
Related
hi, new member here.
bought my tilt on 10/4/07. has been flawless since that time.
used the nav quite a bit during a road trip, used a cig lighter usb charger.
got home and my battery was at roughly 40%.
put it on the charger at night went to sleep. in morning disconnected it at 8 am. shortly after i arrived at work i got the critical battery low chime. checked and it had like 7% battery life.
figured i didnt plug it in right, or it got knocked loose some how and didnt get charged.
put it in flight mode to minimize battery usage. left work at 2 30 pm (4% battery life) and put it on the car charger. got home and put it on the HTC supplied wall charger. light turned amber, so i assumed it was charging.
checked an hour later and turned phone on, it said 0%, and immediately died. left it on the charger for a few hours and the light was still amber, turned it back on and again 0% and phone immediately died and did a soft reset on its own. i turned the phone off and left it on the ac charger, took out the sim card and put it in an old blackberry to use while the battery was charging.
its been on the ac wall charger for the last several hours, i checked and the phone is totally dead, cannot turn it on, and the LED at the top is now RED.
what is the problem here? why wont this thing charge?
thanks in advance, i have alot of critical info on this device and any help would be greatly appreciated.
i cannot hard reset because i cannot turn the flippign thing on....
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
I'd try a different charger first. If that makes no difference then a different battery. If that still does not make any difference then time to exchange it.
Lidberg said:
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
Click to expand...
Click to collapse
connected to either the computer or the wall charger, the LED thats normally amber when charging, and green when charged, remains red.
I had something very similar happen to my wizard.
And as weird as it sounds, the only fix was to charge the battery in a friends wizard on his charger. I'd check the battery if possible.
Could be the battery. Know any place or anyone that will let you try a charged battery? If not, you might have to go in to an AT&T store.
i think i got it working. did some reading/browsing...
took a usb wire and cut the mini usb head off. dissected it and found the the red and black charging wires. took out the battery and held the leads to teh battery while the other end was plugged into a USB/AC adapter wall charger from a old blackberry. after manually charging the battery for several minutes, i put the battery back in the phone and the phone started up. now it seems to be charging off the wall charger and the led is now amber from red.
thanks for all your help/suggestions.
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
tiltyoself said:
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
Click to expand...
Click to collapse
Repeat this proceedure but this time do not turn the phone on, just plug it in to the wall charger once you have zapped the battery again.
Turning your phone on probably just caused the already recovering battery to die whiles it is trying to take on a charge.
It is mentioned quite a lot on the boards that Li-Ion Batteries do not like being over disscharged and there is usually a little protection circuit in the battery to provent complete disscharging although this circuit may be on board the phone. Completely disscharging a Li-Ion cell will kill it stone dead and it will need replacing.
When you took the battery out and so called jump started it with your flying leads, this possibly reset the little protection circuit in the battery so it can now take on a charge. I feel that once you turned on the phone, this was to much for the already depleted cell to take and possibly re-tripped its inbuilt circuit.
If you do manage to recover you cell, in future it is good practice not to let the battery go below about 25%. Li-ion cells are generally happy being top off regularly.
I hope this helps buddy
Do let us know!
Cheers
C.
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
That Sucks! I hope they'll give you a new battery.
tiltyoself said:
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
Click to expand...
Click to collapse
I had exactly the same problem with my battery. It came on though after a day. Although the battery life after this happened went down to 10hrs max on standby. I sent the phone back and got a new one and now all is fine.
This is a problem that affects almost all makes of phone. There are three (main) causes of the problem:
1.
The battery charge drops too low to allow the charging circuit to recognise a battery is even in place (red no charge light stays lit)
possible solution:
http://forum.xda-developers.com/show...22&postcount=6
(in the end very similar in the end to the USB wire used in post above)
2.
A faulty battery (but if you can charge it using a cut usb cable or using a couple of AA batteries this may not be a faulty battery.
3.
A faulty charger OR a charger not delivering 5v at 1000mA as the OEM one does. Many chargers that are used for other phones or generic chargers only deliver 500mA. This is not enough when your battery drops very low. (these chargers are OK for occasional use but I do not advise using them regularly particularly if the no-charge syndrome has shown itself)
4.
A faulty USB connection on the phone. I have now seen a couple of reports where the fine wire connections in the phones USB port have become bent out of place.
Number 4 above is at least possible for the OP as it seems the battery will charge using a cut USB cable but not when either the PC USB cable or mains charger is connected. A USB port on the phone with a a bent internal contact would explain what's happening.
A previous poster was able with a needle or similar to bend the contact back into place.
Mike
i had the same problem with my phone.
put it in the charger overnight and woke up in the morning and couldnt turn on the phone with blinking red light. I don't know if my battery was over-drained though. I went to AT&T and was playing around with their charger and new battery and somehow the so-called dead battery started working again. They changed the SIM card on my phone there and then i haven't been able to use the phone since. I've changed the network to GSM instead of Auto setting under Phone Options which allows us to make calls; but now I can't connect to 3G network.
Charging thru mini usb
My phone started to exhibit similar problems...plugged in but no charging of the battery. I finally realized that my mini usb connection on the phone has been compromised (bent, distorted=not functioning properly) Now I have to prop the mini usb connection up at a slight angle to engage the charge. I think the plastic/metallic connector on the phone is somewhat fragile ...I had similar issues with my hermes.
called customer support.
they are sending me a new phone and battery.
how do i know its not a refurbished one? any clues?
before u send out your defect phone, have u check if your phone's mini-USB connector has bent or misaligned pins?
yeah all the connectors visually are fine.
Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~
flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.
i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,
i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.
any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks
well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.
I am using a moto Razr car charger and it works fine so far.
Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.
i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.
RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.
Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?
Well I'm at about 2% battery life, and it will not charge. I'm using my computer to charge it. Charging it from the wall hasnt worked for me for a while, not sure why.
Anyway I was wondering what it can be? I doubt my battery's dead or something is wrong with the phone... I'm sorry if this question's been answered, but I couldnt find an answer on google.
If USB charging works, but not charging with the AC adapter then the adapter is either bad, or plugged into a bad power outlet.
Nope it's neither of those because Ive tried two working AC ountlets and two warking cables. However, that's not my problem, my phone died and I can't charge it :-/
Ya so the phone died. It didn't look like it was going to charge on the USB, really weird. Anyone ever have there phone refusing to charge? While it was alive I tried to run activesync; that didn't work. So what should I do?
Btw, I've had the phone for a couple months now and I haven't had any big problems. I don't think it can be my phone failing, worst case just the battery. I've had something similar before but it fixed itself, doesn't look like thats happeneing now.
Battery
Maybe charging from the computer wasn't such a good idea. I recommend changing the battery and the charger and always be a nice boy and charge from the outlet ::- ).
I had the same thing happen to me - the connector at the bottom was broken. I had to do a return to factory. I looked (using a magnifying class) at the bottom of the phone and clearly see a crack in the connector.
It doesn't charge from the outlet.... I kinda just explained that lol
jrd said:
I had the same thing happen to me - the connector at the bottom was broken. I had to do a return to factory. I looked (using a magnifying class) at the bottom of the phone and clearly see a crack in the connector.
Click to expand...
Click to collapse
Hmm my connector does look a little bent. However it would of had to be like this before, and it was charging until I let my battery get to 5% :-/
I had a similar problem with my Kaiser a couple of weeks ago - it started to crawl and a soft reset took over 15 minutes to come back up to a working state, after which the battery wouldn't charge. It definitely wasn't the charger at fault as that still works on my TyTN. Phone was about 3 months old, so called Vodafone UK who seemed to think it was software related and so provided next day swap out. Old battery works in the new handset so never did get to find out if it was hardware or software that caused it to die.
Here's what probabally happened... you meant to stick you stylus in the reset hole and accidently put it in the usb hole... thus bending your charging port. I did it and when I plugged it into my car it would actually discharge the battery.. but when I plugged it into an outlet it just wouldn't charge.. if I were you I'd go see if it charges in a car
I appear to have a similar issue when charging from PC usb, and have identified that if I put pressure up or down on the charger it will charge the kaiser. But if plug in the charger without applying directional force it will not charge. Currently i have a small weight resting on the mini USB chargin input.
So obviously something up with the connector. But I haven't jammed anything up the usb port to my knowledge. Are these ports really that flimsy?
Tilt owners: If charge mechanism breaks, is ATT cool?
Oh no, now I can't charge or sync my Tilt.
My power is slowly running out.
What do I do? This is covered by manufacturers warranty in a year, is
ATT going to take my Tilt back and give me a new one?
I need my phone to be working and working well.
Thoughts?
axonn said:
Maybe charging from the computer wasn't such a good idea. I recommend changing the battery and the charger and always be a nice boy and charge from the outlet ::- ).
Click to expand...
Click to collapse
Charging from the computer should be better than the wall, given that the USB ports on the computer have a 5.5v output, while wall chargers have 5v.
I'm creating a new thread because I think my charging issue is unique...
My Kaiser will show an orange light and indicate that it's charging when:
1. Powered On and plugged in to: USB, AC power Adapter, or Car charger
but it will not take a charge and the orange light goes out after about two minutes.
2. Powered Off and plugged into: USB, AS Power, or car charger
but the orange light remains on and it never charges (tried 5 hours)
The device also does not sync, I don't see anything physcially wrong with the USB port, but it was damaged by water several weeks ago, it hasn't worked properly since.
I've been getting by with an external battery charger that I purhcased from Ebay.
Does anyway have any ideas? I've reflashed the device since then as well and there is no change in how it reacts to charging..
Hi echofive
I have the same problem with my Kaiser but at least it charges with just one of my 5 AC power adapters. Not in my Car charger and not on a USB connection.
Maybe it has something to do with the small USB pins on the Kaiser which are not properly aligned. You can try to bend them.
Good luck.
Hello, I was having this same issue and (long story short) I believe that it is the small USB pins on the phone.
Here is what I found (sorry knda long post). I have two ATT TILT phones. My Original Tilt phone got soaked in water but I was able to almost salvage the phone by soaking it in Denatured alcohol and letting it dry. This 'wet' Tilt has all functions but cannot read sim cards. It does however charge perfectly.
The replacement Tilt I have works like a charm but refuses to charge. Regardless of USB charging, off the wall charger or car charger, the orange light comes on, says it is charging but in 2 minutes the light goes out. The phone is still listed as charging but I know it is not charging because the battery level continues to drain. The phone does sync to my PC and I am able to transfer files to/from my new TILT via a USB cable. Just cannot charge the device.
I have 3 batteries. 2 stock batteries and the large 3200mah battery. All three batteries will not charge on my new TILT. I tried charging it via USB connected to my Computer, Car cigarette lighter, Car inverter charger, official TILT charger from CINGULAR ATT. Completely unable to charge the device.
If I attempt to charge the batteries (all three of them) on my old 'wet' TILT the batteries charge regardless of what method I use. It will charge via USB connected to the PC, USB connected to wall charger, official ATT TILT charger, or car charger. No issues. So I know the chargers, cables and batteries do charge on a TILT. Both TILTs are official ATT TILT devices. Two of the batteries are stock and 1 of the batteries is a SEIDO 3200mah.
Sometimes I get lucky and the new TILT phone does charge. In these cases I charged the phone using the Wall charger and the battery was over 50% capacity.
Now I know the new Tilt USB port is working because it syncs to my PC just doesnt charge after 2 minutes (light goes out) and battery continues to drain (watched and tested this after 3 hours of observation). I ended up ordering one of those TILT USB connectors which have a 3.5mm headphone jack and USB port.
This device: http://www.amazon.com/i-Trek-Stereo...8&s=musical-instruments&qid=1230877732&sr=8-4
What is weird is that I can now charge my NEW TILT using the USB port on this connector with this connector attached to my new TILT. If I attempt to charge the TILT using the onboard USB port, it stops after 2 minutes and the light goes out.
Personally, i think it has something to do with the pins. Hope this helps someone.
Jinkage said:
Regardless of USB charging, off the wall charger or car charger, the orange light comes on, says it is charging but in 2 minutes the light goes out. The phone is still listed as charging but I know it is not charging because the battery level continues to drain.
Click to expand...
Click to collapse
Been there, had that problem and the solution was even simpler and didn't involve the charging/USB port at all. Get a cotton bud (US folks call them Q-Tips) and spray some contact cleaner on it (not anywhere near the phone) and use it to carefully clean both the gold strips/terminals on the batteries along with the gold spring terminals on the phone. Although they may look clean, invisible grime film can make the connection fail and cause this problem. This is also a good tip to follow with ordinary household battery rechargers and NiMH cells. I haven't had this problem since but still carry out a terminal clean every few months to be on the safe side.
My phone wouldn't charge anymore. Searching through threads I found a magnificent magnified picture of the mini-USB port and the way the right part of the port was bent down a little. It was exactly like that with my phone, I used the pointing stick to tilt it up a little (be careful it may break of the pins, and that would lead you far from home!), which fixed! Haven't had the issue since!
Regards,
Nika.
Hi.
Have you still the link with the picture . I have the same problem an i am afraid , that i can kill my Kaiser
Regards
Dariely
Nope, sorry...
I had a similar issue with my Kaiser. It would charge with a USB cable and an ac adapter but not in the car. It used to but stopped. I took a dental tool and lifted the two little legs inside on the bottom of the mini usb port so they would contact the charger again and all is well.
nikagl said:
My phone wouldn't charge anymore. Searching through threads I found a magnificent magnified picture of the mini-USB port and the way the right part of the port was bent down a little. It was exactly like that with my phone, I used the pointing stick to tilt it up a little (be careful it may break of the pins, and that would lead you far from home!), which fixed! Haven't had the issue since!
Regards,
Nika.
Click to expand...
Click to collapse
YEAH!
Great Tip!
had the same issue as you a long time!
tilt up the pins: no more problem!
THANKS A LOT !
I straightened up the last pin. I was beginning to think it was my AC Charger...I plugged it in my Ashtray charger and it charged without a problem. I will see if this takes a charge. I didnt use any denatured alcohol, I just took the compressed air canisters used for computers and cleared out the usb port....
we wait now
Hi,
I have a kaiser with either a mainboard/usb fault. HTC wanted £250 to fix, so a repair is out of the question.
If I charge the battery on another Kaiser and stick it in my faulty one then my faulty one works fine for a few hours (it discharges more rapidly than it should - I assume due to the fault, but works for probably 4 hours) there is no way of charging via the faulty phone mini usb connector (it lights up amber but doesn't charge, nor does the USB connection hook onto the computer).
Luckily I had hardspl on the phone from new and can easily update via the uSD card if any need.
My questions are these: How can I hard wire my kaiser to a power supply so that I can leave it on in my car at all times? (it doesn't need to be moved)
The battery is 4.2v, can I hook a 5v supply onto the 2 outer pins?
What are the other 2 pins for?
Do I need to connect the 4 copper pads in the battery compartment together?
Thanks for any help that you guys can give!
http://www.mikechannon.net/page1.html
check out the service manual
Hi,
Thanks for that, I scoured through the service manual but I couldn't find anything about the voltages on the battery compartment terminals and therefore how to hotwire power straight into them, I don't know much about this and didn't want to screw it up worse than it already is by sticking 5volts onto them. Looking at the markings on the battery power to the outer 2 terminals would do it but i'm sure there's more to it than that.
Dan.
Many angles to this.
Battery is 3.7 volts. You'd want to supply that. But there is a battery charging circuit inside the phone. How that will effect things? I don't know.
There is a circuit in the battery that gives you battery % I believe. Unless you feel like reverse engineering that, you're in a tight spot.
I'd say save your cash, and buy a new phone. this probably won't end well.
on second thought. If you're already willing to hardwire contacts, why not just hardwire 5V to the USB pins?
Keep your battery in there and you'll have 5V on the usb port keeping everything happy
Hmmmn, you might be on to something with that, the problem with the phone is that it doesn't charge when hooked up. The power light glows amber but it actually makes the phone DISCHARGE faster than when not connected. Once the battery gets completely drained all I get is a RED led.
When I sent it back to HTC they said water damage right away. I know for a fact that it hadn't been wet in more than 2 months (it did get wet but only a few raindrops, just enough I guess to wet a detector strip) from when this fault occurred so perhaps it's not a mainboard fault and is in fact the USB connector failure another thread is referring to....Hmmmm.
Gonna give it a bit of thought and then either get the soldering iron out or just bang it on ebay for spares. Should think the screen assembly would be worth a fair bit!
Perhaps I misunderstood.
If you're getting the magical amber LED while the USB is plugged in, I'll say you have a good connection. I wouldn't screw with any soldering. It does sound like you have a short somewhere.
I only had my phone drain faster than it could charge when I setup a bittorrent client on my phone. Got warm!
Inspecting the board for damage might be the best choice. I've seen a motherboard on a laptop that went out with visible water damage. I scraped off an area with "ick" on it that was shorting out two contacts.
If you can't solve it that way, I'd try to disable 3G/bluetooth/wifi and see how low you can get your power consumption.