Plz Help Me.....
I Cant Connect My Mobile To Pc Via Activesync Whenever I Upgrade To Windows Mobile 5. I Had The Same Problem Even In Tuma v1.3...
I Have ActiveSync v4.1.0 (Build 4841)
And So I M Not Able To Copy All The Files Of Ext Rom.....
Plz Someone Help Me...
AS 4.2 went final the other day, try the latest version. AFAIK it contains a lot of bug fixes.
Also, some people have problems when plugged into a USB hub, try a direct connection or even another port.
Did you check and see if your mobile network setting (local PC) is set correctly?
Goto My network --> Properties
and you should see a netowrk connection for Windows Mobile Device.
Go to properties, and enable the Internet Protocol for the device.
i'm really keen to get this issue fixed.. any suggestions would be appreciated.
i have just downgraded from WM6 to WM2003SE (o2 XDA offical rom 1.40 for AUS) and i cannot sync the device anymore.
i have completely set the device back to it's original state, ext rom, main rom, radio rom. the PDA itself works fine, no issues there.
i receive an error when i try to sync with my laptop.. (which it used to sync with when i put WM6 on the device).
the error is - cannot verify the version of activesync on your device, a program such as a firewall may be blocking a port activesync uses to connect to your device, you may need to upgrade to a more recent version or activesync
i have removed activesync, deleted all the registry entries, folders and files relating to activesync that i could find. reinstalled activesync, still no luck.
-> i can get the device to sync with my desktop without any problems (i never used the desktop to sync to it when WM6 was installed)
however all my data is on the laptop.
Any ideas ?
update
here is an extract from the log..
**** ActiveSync (4.5.5096 RETAIL) started, Cmd line: '/onconnect'
10/08/2007 16:07:14.324 Creating new partnership for device 0x0 (Pocket_PC, PocketPC).
10/08/2007 16:07:14.324 Error 0x8000BADD: Failed to get version number from device.
10/08/2007 16:07:15.927 Creating a guest connection for device of type 'PocketPC'
-> i can't get into the screen to clear the storage and hive..
i can get into bootloader.. can't get it to work when i press power, reset, camera and record.. just goes into bootloader.. or the numbers come up on the bottom..
could there be some residual information left behind from the previous install of WM6 ??
how do i set the version no manually ? is this done in the PDA registry ??
I don't remeber having this problem. All you can do it try to downgrade ActiveSync to one of the older versions.
Whenever I try to update my windows mobile under Settings>System>Windows Update, I get this Error:
"Connection to update server was not available. Check you data connection settings and ensure the device date and time are correct."
My date and time are correct and I am connected through HSDPA and wifi.
Is this the consequence for flashing my tilt?
does anyone know how to fix this or any other way to get Net 3.5 Framework on my device?
I don't believe that any update has ever been released for Windows Update mobile, let alone .NET compact framework. If you want that, connect your device to your computer (I assume you have activesync/WMDC installed), let it connect to the computer, then go here, and download and run the installer, and it will do the rest.
Dave
Hey guys,
I'm trying to update my gf's Galaxy S to JP6 via the latest Kies 2. The program connects initially and notifies about a firmware update.. accepting this brings up some T&C nonsense, choosing 'accept' brings up a box asking what to backup, at this point whether I backup or skip it will bring up an error about failed update, i9000 disconnected etc...
I've uninstalled & reinstalled Kies, no difference, can anyone suggest what the issue is and how to fix it?
It's UK O2 Branded, currently running JP5 (which was updated by an older version of Kies v1.5 that worked on Win XP). The PC in question this time is running Windows 7 64bit. I rooted the phone using SuperOneClick and had installed RyanZA's OCLF v2 from the market.. i've undone the OCLF now though.
Kies and Win 7 x 64 i have never got it working . But have on Win 7 x32 .
jje
viva.fidel said:
Hey guys,
I'm trying to update my gf's Galaxy S to JP6 via the latest Kies 2. The program connects initially and notifies about a firmware update.. accepting this brings up some T&C nonsense, choosing 'accept' brings up a box asking what to backup, at this point whether I backup or skip it will bring up an error about failed update, i9000 disconnected etc...
I've uninstalled & reinstalled Kies, no difference, can anyone suggest what the issue is and how to fix it?
It's UK O2 Branded, currently running JP5 (which was updated by an older version of Kies v1.5 that worked on Win XP). The PC in question this time is running Windows 7 64bit. I rooted the phone using SuperOneClick and had installed RyanZA's OCLF v2 from the market.. i've undone the OCLF now though.
Click to expand...
Click to collapse
Try to run Kies as "administrator" with "windows xp compatibility mode".
viva.fidel said:
Hey guys,
I'm trying to update my gf's Galaxy S to JP6 via the latest Kies 2. The program connects initially and notifies about a firmware update.. accepting this brings up some T&C nonsense, choosing 'accept' brings up a box asking what to backup, at this point whether I backup or skip it will bring up an error about failed update, i9000 disconnected etc...
I've uninstalled & reinstalled Kies, no difference, can anyone suggest what the issue is and how to fix it?
It's UK O2 Branded, currently running JP5 (which was updated by an older version of Kies v1.5 that worked on Win XP). The PC in question this time is running Windows 7 64bit. I rooted the phone using SuperOneClick and had installed RyanZA's OCLF v2 from the market.. i've undone the OCLF now though.
Click to expand...
Click to collapse
Could you fix it?
End to the Noob Bashing...
Just realised that i was looking at the wrong post when i posted this data so the reasons for posting bit at the top of this will make no sense....sentiment still true though. Hope it helps either way.
Ok, i'm a Techie. I know without a shaddow of a doubt that my Laptop is fine in every respect and yet it was doing this to me also.
Believe me when i say, you're not insane, and despite what others say you DO have a valid question which DOES deserves a valid answer...ENOUGH of the trollish Noob bashing 'non answers'.
If you are having the EXACT same issue as the original poster, heres what you do:
With your phone unplugged....
Update Kies:
Make sure you have updated Kies to the most recent version. Either do this by going to your mobile phone opperators website and downloading the updated software version directly or by using the help --> Check for Updates option. Latest version at time of writing is: 2.0.2.11071_128.
Once up-to-date, close Kies. Although probably not essential, use 'Task Manager' to end any Kies related processes.
Uninstall Samsung USB Driver Software:
1) Navigate to Control Panel and open either (Windows 7/Vista) 'Programs and Features' or (Windows XP/2000) 'Add Remove Programs'
2) Scroll through the list of programs to find one called 'SAMSUNG USB Driver for Mobile Phones'. If it is installed, right click it and select 'Uninstall'
3) Run through the process of uninstalling the software.
Tidy up Devices:
1) Right Click 'My Computer' select properties
2) On windows 7 (possibly Vista also...dont know as I skipped that generation) ONLY, select the 'Advance System Settings' option over to the left of the window.
3) Select the 'Advance' tab in the 'System Properties' window that appears.
4) Click 'Environmental variables'
5) In the 'System Variables' section of the window that appears, click 'New...'
6) In 'Variable Name:' type 'DEVMGR_SHOW_NONPRESENT_DEVICES' without the quotes
7) In 'Variable Value:' type '1' without the quotes
8) Click 'OK' times 3 to exit the windows you opened
9) If Windows 7 (or Vista) close the 'View basic information about your computer' window also.
10) Open 'Control Panel' and navigate through to 'Device Manager'
11) Click the 'View' menu and select 'Show Hidden Devices'. This will display all mothballed devices i.e. those devices which have previously been plugged in but then removed. Windows stores a record of the drivers in the background of the system to speed up the process of installing the device drivers when you next plug in said device. Sometimes, in the case of Network Cards for example, not only will it store the drivers but it will also store its settings. This can cause a problem as if you were to plug in a replacement Network Card and set it to use the same static IP address, the mothballed device will clash with the current device. Without the environmental variable setting being configured as above, even when you show hidden devices, mothballed devices remain hidden.
12) Starting from the top, expand each of the branches in the tree to see the devices within them.
13) Look for anything with a 'Samsung', 'MTP', 'GT-I9000' prefix. If found, right click and select 'Uninstall' and confirm at the prompt. BE CAREFUL NOT TO UNINSTALL ANYTHING YOU ARE UNSURE ABOUT. Google it if need be to figgure out what it is and if its not a Samsung or android related device then leave it well alone.
14) Close Device Manager once you have assessed the final branch.
Re-Install Samsung USB Driver Software:
1) Open Kies
2) Expand the 'Tools' menu and select the 'Install Driver' option.
3) Click ok to any prompts to fire off the process.
4) Wait for it to complete.
5) On completion click 'Ok' to acknowledge if required.
At this stage, it may be worth turning off your Windows Firewall and AV scanners just to be on the safe side. Probably not an essential step but may make a difference. If you're not confident enough with computers to do this then dont bother.
Re-Connect Samsung Galaxy Device:
1) Plug the Micro USB cable that came with your device in to ANY of your most trust worthy USB sockets.
2) Plug the other end into the Micro USB socket of your Samsung Galaxy S.
3) Allow Kies to pickup your device and display the storage information proving it is properly connected.
4) If an update is avaialble for your device, Kies should prompt you. If you are confident that you have all the data backed up onto your computer, then proceed with the Firmware update.
5) Click either the Backup or Skip Backup option.
6) Panic a little when the device appears to disconnect YET AGAIN!
7) Chuckle to yourself knowingly once it blasts through this onto the update.
8) Once completed unplug from and re-plug your Samsung into your computer again.
9) Upload your backed up data.
10) Get rid of the God-Awful default dasktop layout that your Mobile provider forces onto you.
SORTED!
Dont know what causes this but what i have noticed is that once you have tidied the mothballed system devices related to your phone and re-installed the device drivers again, it appears as if there isn't any devices named with the prefix of 'MTP' in the device list but there are a few more labelled with a 'Samsung' prefix.
I suspect this is something to do with Samsung at long last fully qualifying their own drivers but not bothering to tidy up the mess that the old devices left behind as part of the Kies update process. Either that or Windows prevents the Samsung USB Driver installer software from being able to delete/update existing Samsung devices.
Enjoy!
I wish I could say this worked for me... but alas, it has not...
This is from a post I entered earlier today... (no change from this either)
ghosty_uk said:
... steps that worked for me
1, downloaded MyBackup (free version)
2, did backup of both apps and data (put both on ext memorycard)
3, used the restore to factory option under privacy in the settings menu
4, unmounted internal sd card and formated it (to remove the mtp loop issue)
5, run kies,
6, select update firmware,
7, at the box where it says no device connected, put into test mode (ctrl + alt + U + P)
8, connected phone
9, detected thaqt there was an update to JM1 available
10, started update,
Click to expand...
Click to collapse
I have yet to do any of this (other than get a backup using MyBackup), but have some questions... (noob here)
Step 3: Will this remove all the definitions for my phone number and/or provider as well?
Step 7: the CTRL+ALT+U+P thing doesn't work with Kies 2.0.2 so if I am unable to do an update, will the phone be at Froyo (2.2) as it is now? or does it revert to 2.1 (which it was when I bought the unit)?
I also got this "Informational" record from the Event Manager... (I could hear the system connect, then drop the Kies connection)
Fault bucket 17725111, type 5
Event Name: PnPGenericDriverFound
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: USB\MS_COMP_MTP
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
D:\Dad\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_d1b8bb6482961a133bbee52e8072f0433f363959_21d02bae
Analysis symbol:
Rechecking for solution: 0
Report Id: 5ebfff60-c94e-11e0-948f-005056c00008
Report Status: 0
Well had to go through Samsung Support... they got me to reset to factory default (since I had a backup) then do the Kies update...
All is better although it would be nice to know what had gone wrong...
Is there a consistent way to enable these in developer options? I've tried all the Google suggestions and can only get it randomly and seldom. I want to lower my doing settings now that I've flashed the dev Rom.
Found this and it worked!!!!
"Install via USB" wont work if your Xiaomi phone is running MIUI 8 or above. Looks like when you try to Enable this option, your phone trys to connect to some chinese server and fails.
I got a work around and it worked for me. Idea is to connect to Chinese-Shanghai server through VPN. Try the following:
Install PlexVPN from Playstore and login into it. You will get a 24 hr free VPN service.
Select China-Shanghai server and connect.
From developer option in your Xiaomi phone, Enable "Install via USB".
You can then disconnect the VPN and logout from PlexVPN.
Enjoy!!