Hey Guyz
Ijust flashed SPL 1.54 on my blackstone via uspl. now I got the problem that I can't flash another spl like 1.56 olinex or anything else cuz the communication between blackstone und PC via USB breaks every time.I'm sure my USB devices are fine but what happend to my blackstone? I can't even flash ROMs with my the spl 1.54 cuz it freezes in "Loading..." screen in the bootloader...(SD flash)
here is the link to the spl I tried to use,
http://www.handy-faq.de/forum/htc_touch_hd_forum/72426-htc_touch_hd_spl_1_54_a.html
I precicely followed the instructions in the Video and my bootloader actually shows SPL version 1.54 but only in that screen, when I'm in the installer of another SPL (tried 1.14 and 1.56) the version isn't displayed.
anyone got an idea what to do? The Way it is I ruined my guarantee and can't even flash Roms :-(
Cha0zb0rn said:
Hey Guyz
Ijust flashed SPL 1.54 on my blackstone via uspl. now I got the problem that I can't flash another spl like 1.56 olinex or anything else cuz the communication between blackstone und PC via USB breaks every time.I'm sure my USB devices are fine but what happend to my blackstone? I can't even flash ROMs with my the spl 1.54 cuz it freezes in "Loading..." screen in the bootloader...(SD flash)
here is the link to the spl I tried to use,
http://www.handy-faq.de/forum/htc_touch_hd_forum/72426-htc_touch_hd_spl_1_54_a.html
I precicely followed the instructions in the Video and my bootloader actually shows SPL version 1.54 but only in that screen, when I'm in the installer of another SPL (tried 1.14 and 1.56) the version isn't displayed.
anyone got an idea what to do? The Way it is I ruined my guarantee and can't even flash Roms :-(
Click to expand...
Click to collapse
If your SPL is 1.54.0000 then you need to re-use USPL before flashing. USPL is only temporary and needs to be re-used before every flash
Read this guide and post any further queries within that thread.
Thread closed
Related
I am about to buy a Touch HD that has already the stock 1.56 ROM therefore, has 1.54 SPL in by default....
What is not perfectly clear is... do i still need to downgrade, hardSPL, upgrade to 1.56 and then use uSPL or do i simply use USPL and flash as it is?....
2nd option. Run USPL first, everytime you want to flash a ROM/Radio/etc.
Z3R0-CooL said:
I am about to buy a Touch HD that has already the stock 1.56 ROM therefore, has 1.54 SPL in by default....
What is not perfectly clear is... do i still need to downgrade, hardSPL, upgrade to 1.56 and then use uSPL or do i simply use USPL and flash as it is?....
Click to expand...
Click to collapse
USPL and flash
Gr. Bram
If your device already has 1.54 SPL, USPL is your only choice. Also, unlike HSPL, USPL is NOT on your device all the time. So every time you want to flash a cooked ROM you would have to flash USPL to your device before the cooked ROM flash.
Now if you want to try the cooked ROMs that have 1.14 SPL, you also have an option to downgrade your SPL and then flash.
There are 2 kinds of ROMs out there (both cooked and ship) The ones that only work with 1.54 SPL (you would get this SPL if you flash Ship 1.56 ROM) and the ones that do NOT work with 1.54 SPL (these ROMs have 1.14 or 1.19 SPL).
HSPL is only good for NON-1.54 SPL ROMs.
USPL works with All kinds of SPLs.
I downloaded the spl from haykuros site and radio flashed the radio first then the spl on top of a jf build. I want to know how to tell if I have the spl. I think I have it because I had and ion rom for a while but I just need to know. I know I'm a noob
SocaWarrior101 said:
I downloaded the spl from haykuros site and radio flashed the radio first then the spl on top of a jf build. I want to know how to tell if I have the spl. I think I have it because I had and ion rom for a while but I just need to know. I know I'm a noob
Click to expand...
Click to collapse
First: Search, if you cannot find after at least 5 minutes of search, then you're allowed to start a new thread.
Its annoying to answer questions that people have answered hundreds of times on these forums.
Anyways, to check, turn off your phone, then hold down the camera button as you press the power button, a tri-color screen will popup and on the top it will tell you which SPL you have. If you have the: HBOOT 1.33.2005 SPL then that's the new one.
Ok sorry but mine says pvtdrea100 32b
Hboot 0.95.00
Somethin
Radio 2.2 the new one
So do I have the new spl plz answear
And what do I have and what to do to upgrad plz
soory but help
Ok sorry but mine says pvtdrea100 32b
Hboot 0.95.00
Somethin
Radio 2.2 the new one
So do I have the new spl plz answear
And what do I have and what to do to upgrad plz
SocaWarrior101 said:
Ok sorry but mine says pvtdrea100 32b
Hboot 0.95.00
Somethin
Radio 2.2 the new one
So do I have the new spl plz answear
And what do I have and what to do to upgrad plz
Click to expand...
Click to collapse
How about finish reading my previous post?...
So to upgrade just flash the new spl right but I know you changed it its okay I might of been on a jf us if that was a problem
SocaWarrior101 said:
So to upgrade just flash the new spl right but I know you changed it its okay I might of been on a jf us if that was a problem
Click to expand...
Click to collapse
changed what?
And you need to read the guide to updating to the new SPL... there are dangers to it that you need to be aware of.
Req's:
The newest radio, make sure everything is the same, I've seen a similar version with one letter different that could brick your phone if you use it.
A PVT board which you said you have.
Also after flashing the new spl your phone will not boot so you will need to take your card out and put it in a card reader and load your rom up that way and flash again. The new spl overwrites your existing rom.
http://forum.xda-developers.com/showpost.php?p=3816278&postcount=3
here you go, follow this
Pretty much sums it up
h.nocturna said:
How about finish reading my previous post?...
Click to expand...
Click to collapse
h.nocturna said:
If you have the: HBOOT 1.33.2005 SPL then that's the new one.
Click to expand...
Click to collapse
Go into fastboot mode and if thats what HBOOT says then you have it, if not then you dont
Hi!
When i tried to do a 1.56 hardsplitt on my htch hd it says 1.14 olinex when i boot up,
either way i installed Miri_WM65_21892_Premium_Manila_2.5_V21.1 and it works for about 2 minutes then it shuts down
i have to get 1.56 so run this rom right?
p1ayah said:
Hi!
When i tried to do a 1.56 hardsplitt on my htch hd it says 1.14 olinex when i boot up,
either way i installed Miri_WM65_21892_Premium_Manila_2.5_V21.1 and it works for about 2 minutes then it shuts down
i have to get 1.56 so run this rom right?
Click to expand...
Click to collapse
Yes, you MUST have 1.56 HSPL to instal a WM6.5 ROM with Manila 2.5. Where do you found your 1.56 HSPL?
See here :
http://forum.xda-developers.com/showthread.php?t=431217
Hello,
I have an htc G1 and want to upgrade to Gingerbread.
But every time i try to flash gingerbread i get error 7 in cwm.
After reading some topics i saw that i need SPL 1.33.0013D
Now I have 1.33.2005, radio 2.2.19.26I and i also have a PVT board
How can i get SPL 1.33.0013?
Everything you need is described in Terry's +15MB thread.
than you very much
I've got it working!!
Hi, i have a HTC HD7
this day try to downgrade my device following this topic:
http://forum.xda-developers.com/showthread.php?t=1295068
the bootloader I had was 5.XX so I use this method
http://forum.xda-developers.com/showthread.php?t=1597837
i use this room
RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE
my problem is with the SPL i got a SPL version 1.57 and i cant intall RSPL.
What can i do?
ty.
When you ran the RSPL wizard there wasn't a 1.5 RSPL version that was a close match? It doesn't have to be exactly 1.57 but a 1.5xx version.
If not you can try and install a different PreNoDo/Nodo rom to the device that has a different SPL version that is supported by RSPL/HSPL.
xdrc45 said:
When you ran the RSPL wizard there wasn't a 1.5 RSPL version that was a close match? It doesn't have to be exactly 1.54 but a 1.5xx version.
If not you can try and install a different PreNoDo/Nodo rom to the device that has a different SPL version that is supported by RSPL/HSPL.
Click to expand...
Click to collapse
ty for your answer, i tried with RSPL 1.56 and did not work, what PreNoDo/Nodo could use for?
Europe 1.69.401.01 HTC HD7 T9292 7.0.7389.0 2250.09.16901.401 5.54.09.21_22.33b.50.10U 1.69.2250.0(117833)
will use this? from this link http://forum.xda-developers.com/wiki/HTC_HD7/Shipped_Roms
Yeah try that rom... I believe it's the same one as this -
https://rapidshare.com/#!download|3...01_Radio_5.54.09.21_22.33b.50.10U.7z|9310|0|0
Also use the latest XSPL - Revision #3
http://htcfanboys.com/download/cotulla/?action=view&file=2942
----
ty again for reply
XSPL - Fail
i tried with other radios and used Task 00 but none pass from 3%
The radio won't effect whether or not you can install XSPL.
The only other thing that can prevent it from installing is the devices MID. What's your devices MID?
Enter into bootloader mode and the first line on the top is the devices MID and will look something like "PD29130"
xdrc45 said:
the radio won't effect whether or not you can install xspl.
The only other thing that can prevent it from installing is the devices mid. What's your devices mid?
Enter into bootloader mode and the first line on the top is the devices mid and will look something like "pd29130"
Click to expand...
Click to collapse
PD 29110 MFG
spl- 1.57.2250.0 (113571)
after hour & hours i found this thead http://forum.xda-developers.com/showthread.php?t=1798494 ty for your help