Situation: during my vacation my HTC Tytn-II broke down... (broken LCD screen), and instead of installing a new LCD screen, I got an other TYTN-II a Czech version from O2, from a college... I just want to use the same ROM on the replacement TYTN-II, as on my original TYTN-II.
My broken HTC is from KPN Netherlands, with standard WM6.1 Prof of HTC.
when I try to flash the "replacement" HTC, with the same ROM,
I get the message "INVALID VENDOR ID", (over USB).
It seems the new phone from O2, is not allowing to flash the ROM.
Currently it's version 1.5xxx and I try to upgrade to 3.29
Is this because I use the standard utility of HTC to flash, can I get this new ROM installed any other way?
hvanderknoop said:
Situation: during my vacation my HTC Tytn-II broke down... (broken LCD screen), and instead of installing a new LCD screen, I got an other TYTN-II a Czech version from O2, from a college... I just want to use the same ROM on the replacement TYTN-II, as on my original TYTN-II.
My broken HTC is from KPN Netherlands, with standard WM6.1 Prof of HTC.
when I try to flash the "replacement" HTC, with the same ROM,
I get the message "INVALID VENDOR ID", (over USB).
It seems the new phone from O2, is not allowing to flash the ROM.
Currently it's version 1.5xxx and I try to upgrade to 3.29
Is this because I use the standard utility of HTC to flash, can I get this new ROM installed any other way?
Click to expand...
Click to collapse
You need to follow all the steps here and then after your phone is unlocked from it's original rom, you can flash any rom you want.
http://forum.xda-developers.com/showthread.php?t=433835
Thanks,
I will try this... I suspected it was Locked already...
and sorry I didn't find it myself... but asked...
Related
My MteoR can´t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?
HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!
hello
i bought a HTC Herald(p4350, not tmo wing) yesterday.
i flashed the wm5 to wm6, but they aren't so good..
i would like to flash a new rom (touch it 2.*) but i think the device is CID-Locked.
in htc wizard there was a tool: lockwiz.bat
which unlocked my device (g3)
question is:
are there any program or sg, that unlocks, and "RE LOCKS" ( because of the warranty) my pda?
i need a guide also, and i don't like to pay for it (i am student)
please help me!
regard, pulyka
I flashed my wing without having to CID-unlock it .............. so I doubt you will need to CID-unlock your p4350
To flash a rom, you can use aserg's method.
When you DL a rom, you recieve bunches of other files.
First install a fresh RUU.
Then, install aserg policies.cab, then soft reset.
Then click an run 1_UPGRADE_ROM.bat
Wait and don't touch your herald.
When it says its done, hard reset and voila!
thank you Jamaican!
can i use this rom: Touch-It for CID locked wings! ( http://forum.xda-developers.com/showthread.php?t=332998 )?
and is that a problem that i have black htc herald, and not blue t-mo wing?
or they are exactly the same devices internally, and the difference is only the covers?
fzzyrn: thank you too, where can i find guide?
They are exactly the same device, just defferent outside design and keyboard layout ............... you can try the touch-it v2.0 by itje located here
http://forum.xda-developers.com/showthread.php?t=334323
make sure to read the text file in the package first before attempting the update
thx!
i will try it tomorrow
You can use the Touch-IT 2.0 without any problem, i have a p4350 cid locked and works fine with the aserg´s method
Guys,
I just purchased an unlocked Telstra Touch HD here in Australia and the crappy Telstra ROM is driving me nuts.
I just want my PDA to be the way HTC intended it to be.
I have tried to flash the shipped WWE ROMS for Asia, but I keep getting a "Device ID" error.
Can anyone advise which ROM is compatible and will restore the device to is former glory (removing all the Bigpond rubbish)?
Please help!
Hi, when do you get this error?
you need to put hard-spl on it first. read one of tuttythroy or divideuks posts for a good descriptions of how to flash
Hi there,
I want to recover my device to the stock SPL. I have tried to download the stock ROM from the HTC site but it says "Sorry this software is not suitable for the device." Is every WWE ROM the same? If so can I use a WWE ROM from any region?
Thanks
Hey,
What is your device model? It should look like "DIAM100", a 7 letter code. You can see it by removing the battery and looking somewhere near the type.
If you have a DIAM110, then you're pretty much screwed as HTC provides no ROMs for them. You might be able to find the original ROM somewhere here, but I'd be careful or you might end up like me - during the restore of my original ROM I got a "corrupted" error and am now stuck in a stalemate.
If you have warranty though, I would look for your original SPL (hopefully you recorded the version). For DIAM110 it was 1.93. Just make sure you DO NOT restore the SPL until everything else works well. If you screw up your OS and you have the stock SPL installed then you're stuck.
~codeslicer
My one is a DIAM100 and I'm running Olinex 1.40 unsigned with SatusROM 2.6. My original SPL is 1.93.
That is strange. So you went to the HTC Worldwide website and chose Touch Diamond? It should work... anyways I've seen a Hong Kong stock ROM here somewhere. But you can try checking here: http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades. If you need to return it for warranty though, you need to find the original SPL (hopefully you remember version). To install SPL, you need to use Jump SPL (on this site).
~codeslicer
Hello Gurus,
my HTC Touch HD is buyed at first quarter of 2009.
I thinked i had buy a german Phomne, but the seller has sold me a English WWE from Czech Rep. with a german rom. Now i have a problem with the alignment of the screeen. Because of that i flashed a new shipped rom.
_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE_Ship.exe
But the screen are not in full quality resolution at startup and the problem of the alignment are not gone.
After i have called the german support hotline i flashed the following rom from sunnysoft.com witch are recommended by the hotline for my s/n .
RUU_BlackStone_HTC_WWE_EastEurope_1.56.479.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
But the problems are still there.
Before i send my phone to repair, i would ask in this forum for ideas.
Someone have some?
regards
Chris
DoGaS said:
Hello Gurus,
my HTC Touch HD is buyed at first quarter of 2009.
I thinked i had buy a german Phomne, but the seller has sold me a English WWE from Czech Rep. with a german rom. Now i have a problem with the alignment of the screeen. Because of that i flashed a new shipped rom.
_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE_Ship.exe
But the screen are not in full quality resolution at startup and the problem of the alignment are not gone.
After i have called the german support hotline i flashed the following rom from sunnysoft.com witch are recommended by the hotline for my s/n .
RUU_BlackStone_HTC_WWE_EastEurope_1.56.479.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
But the problems are still there.
Before i send my phone to repair, i would ask in this forum for ideas.
Someone have some?
regards
Chris
Click to expand...
Click to collapse
my guess is that there is a hspl on it and its the wrong one:-o
also you can bypass screen alignment by putting a file called welcome.not on the root of youre storage card and it will be alignd automaticly
you flashed a 1.56 spl rom so you shpould have spl 1.56
turn the phone completly off and press volume down
while keeping it pressed down briefly press the power button so you can see wich spl you have
if it isnt 1.56 flash 1.56 spl to youre phone
DoGaS said:
_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE_Ship.exe
Click to expand...
Click to collapse
That's the ROM my HD was shipped with.
And I still have no problem at all when I flash it.
So, as Miniterror wrote, it has to be HSPL problem.
Since I never used HSPL (always and only USPL), here's information I get in bootloader mode:
BLAC100 32M
SPL-1.54.0000 (yes, it's really 1.54 - just rechecked!)
MicroP-Blackstone (LED) v6