Hi all I reconstructed the raw files from the original TMO Rom dumped on this board. included is the official radio and splash (from Topaz). If you have to return your MDA back to T-mobile for some reason, like my friend "who's MDA keep on powering off on screen out/in".
Reconstructed TMO NL Rom
Your device must be hardSPL before you can run this one after that you must undo hardSPL as in the hardSPL thread
T-Mobile Splash
What programs-tools do you have used to rebuild from raw files to nbh?
Thanks
Very Nice man. I only had dumped the raw files, no time yet to reconstruct it. Guess its not needed anymore Thanks alot for sharing mate.
operators said:
What programs-tools do you have used to rebuild from raw files to nbh?
Thanks
Click to expand...
Click to collapse
It's the same as Raphael and Kaiser, you can use this thread
pnxsinned said:
Very Nice man. I only had dumped the raw files, no time yet to reconstruct it. Guess its not needed anymore Thanks alot for sharing mate.
Click to expand...
Click to collapse
NP
draven187 said:
It's the same as Raphael and Kaiser, you can use this thread
Click to expand...
Click to collapse
Yes, I used that Raphael kitchen,
but when I flashed I got "INVALID MODEL ID".
How and where I can set the correct model id?
(RHOD10000, I guess)
Do you have tried to flash your nbh reconstructed?
It works?
Thanks
NBH Util
add this to the xml
<device name="Rhodium" chunksize="64">
<ModelID>RHOD*****</ModelID>
<CID>11111111</CID>
<Ver></Ver>
<Lang></Lang>
<Item value="0x200">SPL</Item>
<Item value="0x301">Radio</Item>
<Item value="0x400">OS</Item>
<Item value="0x500">Diag</Item>
<Item value="0x600">Splash</Item>
</device>
and extract the nbh and rebuild for Rodium
Finally one with the stock radio! Good looks on that, I needed that and so did a whole lot of people.
So this rom will make the tmous tp2 completely stock? rom amd radio?
I installed it and it was in another language...is this for the tmous tp2?...this sucks my tmo splash screen wont go back to the original one...now im screwed
ahfu25 said:
I installed it and it was in another language...is this for the tmous tp2?...this sucks my tmo splash screen wont go back to the original one...now im screwed
Click to expand...
Click to collapse
If im correct, its the Dutch TP 2 Stock ROM from T-Mobile.
What stock radio was this rom supposed to install? I ask because my radio didnt change from what I already had...the one in my sig...and I went back to the genesis rom and still my splash screen remains the same...I dont mind at all but if I ever have to service my phone thru warranty then I will mind at that point.
Sinds their are a lot of questions about this...
The ROM is in dutch
the radio is stock as it is release from stock bij T-Mobile in the Netherlands
the splash screen is from the TOPAZ TMO Rom, and according to my friend who needed the rom it the same. I don't know if it is the same for the other countries, I can't test it either because I don't own a TP2.
ahfu25 said:
What stock radio was this rom supposed to install? I ask because my radio didnt change from what I already had...the one in my sig...and I went back to the genesis rom and still my splash screen remains the same...I dont mind at all but if I ever have to service my phone thru warranty then I will mind at that point.
Click to expand...
Click to collapse
The Rom should contain 3.44.25.27
Now uploading seperated radio and splash....
Problems with rapidshare preventing me from uploading the radio, so it will only be splash for now
Are you uploading the original tmous splash screen?
ahfu25 said:
Are you uploading the original tmous splash screen?
Click to expand...
Click to collapse
It's in the first post
I apologize for being so persistent but this is the splash for the tmobile us touch pro 2?
As far as I know it is also for the dutch version
Related
There is already a thread on this, but I'm starting a new one as I feel the old one has deviated from its purpose of finding a workaround for the P3600i
For those of you who have not been following...
The current SSPL, Hard-SPL, Super CID methods used to bypass Trinity
(P3600) SPL do not work on the new HTC P3600i.
Here's the reason why:
pof said:
The P3600i has 256MB NAND in oposite of the 128 Mb NAND of the regular P3600.
To flash this device you need bootloader 3.x or higher, and OS rom must be tagged 0x401 in the NBH (not 0x400, which is used for 128Mb NAND), also you should use a new RUU (the on the official WM6 rom should be ok).
Click to expand...
Click to collapse
It was recommended that Olipro be contacted about this, so I did and this is what he had to say.
[/QUOTE]
What that means is that firstly; you need one of the newer SPL versions; send me one and I'll patch it.
secondly; you need to dump your OS from the NBH and then rebuild it using 401 as the code for it (default is 400)
Obviously you could also crack the NBH open in a hex editor and just change the value, your choice entirely.[/QUOTE]
I'm don't have the technical expertise at present to do the above & am kinda pressed for time to learn so I'm hoping someone will be able to help.
Does anyone have the Newest SPL version extracted that they can post?
Can anyone suggest a hex editor to change value to 401 & explain exactly how this is done. I tried using a random hex editor and was confused by the max of hex before my eyes, I'm not sure what I'm supposed to be changing.
Thanks
i'm using htc 3600i too , waiting for success flashing and cooking rom for it.
Surely someone has extracted the SPL-3.03.0000 boot loader.
Please if anyone has it, can you post.
I saw it posted before, but neglected to DL it cause i thought I'd never need it.
I've searched through 40+ pages and have not been able to find. I probably just keep keep missing the page it's on...the search is not the greatest.
I would be forever grateful to the kind soul who would take the time to help a brother out...
After all, "there comes at time, when we all need..."
Here is SPL 3.03.0000 from this official ROM "RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe" (which I believe is the ANZ release).
I managed to upgrade my P3600i from this version which was on the phone when I bough it "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship.exe" (which I believe is the SEA release).
i'm waiting for this solution..
wjohnsaunders said:
Here is SPL 3.03.0000 from this official ROM "RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe" (which I believe is the ANZ release).
I managed to upgrade my P3600i from this version which was on the phone when I bough it "RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship.exe" (which I believe is the SEA release).
Click to expand...
Click to collapse
You're a ledgend thanks so much buddy.
hey guys,
So actually how am i suppose to use the SPL 3.03.0000 thingy that was uploaded ? sorry , newbie here
thanks =)
any new development about the flashing issue?
I hope I can backup my ROM and then use some cooked ROM from this wonderful site
pazuho said:
any new development about the flashing issue?
I hope I can backup my ROM and then use some cooked ROM from this wonderful site
Click to expand...
Click to collapse
We need a patched version of the SPL 3.003... Olipro agreed to do so and I've sent him a PM. Still waiting to hear back.
Secondly we need to dump the ROM from the NBH and rebuild it using 401 as the code (the default is 400)
Or you could:
Crack the NBH open in a hex editor and just change the value, your choice entirely.
I'm don't have the technical expertise at present to do the above & am hoping someone will dump the rom then rebuild as mentioned above or post a tutorial on using a hex editior to change the value.
CHT9110
capeli said:
We need a patched version of the SPL 3.003... Olipro agreed to do so and I've sent him a PM. Still waiting to hear back.
Secondly we need to dump the ROM from the NBH and rebuild it using 401 as the code (the default is 400)
Or you could:
Crack the NBH open in a hex editor and just change the value, your choice entirely.
I'm don't have the technical expertise at present to do the above & am hoping someone will dump the rom then rebuild as mentioned above or post a tutorial on using a hex editior to change the value.
Click to expand...
Click to collapse
Do you get answer from Olipro? I'm sure many people's here are waiting (yes incld me
No word yet. Still waiting
waiting for solution. hope we can play with 3600i soon
Ok. So I'm confused as there are some contradictions. Is it possible for a cht 9110, purchased in Taiwan, to be flashed to an English version using the HTC official website download? Or is that why everybody is waiting for an unlock/flash method?
I can maybe live without any of the real nice rom tweaks that get developed here for at least a little while but I'm not sure how far I can get using the default Traditional Chinese as I'm not a native speaker. The cht 9110 is being offered in Taiwan at a much cheaper price than elsewhere which is one reason I don't want to have one shipped in with the factory English rom already installed. Thanks in advance for any clarification.
p.s. I should probably mention that I have not purchased one yet which is one reason why I can't answer this question myself. Thanks again!
p.p.s. The lady at ChungHwa Telecom said they were sold out all around Taiwan. They'll call me back in two weeks when they get more in from HTC.
I think it is possible to flash the offical englsh rom in the cht9110
as people said they can flash the official ROM into the P3600i
just can't use those cooked roms here
pazuho said:
I think it is possible to flash the offical englsh rom in the cht9110
as people said they can flash the official ROM into the P3600i
just can't use those cooked roms here
Click to expand...
Click to collapse
No no, I'm using CHT9110 from Taiwan with Chineas rom. and I try to flash with Official WWE rom, it will give you error of Invalid ID.
Sorry..the corrected error message is " Invalid Vendor ID"
Any news from Olipro?
keen to try out the roms in development here as well.
I have a CHT9110 and I have just failed to upgrade it with Official English ROM downloaded from Dopod's website....need to convert Traditional Chinese Version to WWE version.....
Me too. Can you please share the official WWE Rom, I can't download it. Is this the "Wrong device ID" issue ?
OK guys, I'll sort this all out for you.
Firstly I need a volunteer (capeli perhaps?) your device won't be harmed as part of my testing by the way.
I'll need someone so I can run through soft-loading the SPL and flashing it on etc.
now, unfortunately, my ISP has royally ****ed up my ADSL line, so currently I'm running via my PDA, which is costing me £1 per megabyte, which is rather unpleasant, so please do bear with me guys.
capeli: I'll get the SPL patched shortly for testing, cheers mate.
Waiting Also. I am inAusralia with a new 3600i and would like one of the cookeed ROMs I have been reading about. I will keep close to theis thread for an outcome.
Perhpas I could bother you all with some questions:
Will a new ROM affect what is on my device currently?
Will it affect my 3G settings to my service provider Telstra?
Will it affect third party apps I have instaklled; TomTom, Task Manager, TouchPal?\
Can I go BACK if needed?
tchoklat
Pretty new to this, had smart phones before but never flashed them.... I like the look of Duttys work but was wondering where I could get a backup HTC Factory UK ROM? so I can flash it back if I dont like the new ROM?
ps its an Orange Touch HD!
mine is also an Orange Uk Touch HD, I restored it the other day using the Orange ROM at the bottom of this page on Dutty's website
http://www.duttythroy.net/download-area.html?func=select&id=35&orderby=2&page=2
Ahhhhh thanks very much! appreciate the pointers!
Why did you flash it back to factory? I've read that cooked roms are faster and more responsive?
Also did you have to unlock it first? mine is still locked to Orange
Sorry about all the questions.
The roms posted on duttys website for orange are well, not the latest 1s from orange i compared it when i ran the setup, i have rom version 1.19.61.1, which is also shown in system > device informatin
iky10 said:
The roms posted on duttys website for orange are well, not the latest 1s from orange i compared it when i ran the setup, i have rom version 1.19.61.1, which is also shown in system > device informatin
Click to expand...
Click to collapse
Is this the WWE version of Orange ROM. If yes can you post for us
iky10 said:
The roms posted on duttys website for orange are well, not the latest 1s from orange i compared it when i ran the setup, i have rom version 1.19.61.1, which is also shown in system > device informatin
Click to expand...
Click to collapse
Can you please post a link to this rom, its what on my device as well, but would like to have a backup before flashing begins.
i can post it, i will back up it bck and using the backup utility which is somwhere in there forum...some time 2day, i will post it up
EDIT: Backing up done , creating nbh file, just hope i'm doing it right i'm following this guide ( http://forum.xda-developers.com/showthread.php?t=463035&highlight=itsutils&page=2 and http://forum.xda-developers.com/showthread.php?t=427507 )
iky10 said:
i can post it, i will back up it bck and using the backup utility which is somwhere in there forum...some time 2day, i will post it up
Click to expand...
Click to collapse
Please dump the ROM following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=427507 or this thread http://forum.xda-developers.com/showpost.php?p=3078601&postcount=4.
You can rebuild it using the nbh from the official HTC 1.19 WWE ROM.
After that please upload it and post the link, so it can be added to the wiki.
Thanks,
K_Hismoom
Orangised?
Hi. This Orange 1.19 ROM, has it been butchered by Orange with them changing icons and removing changing programs etc, or is it a cleaner HTC ROM?
Just to know how excited I should be
i'm having trouble creating the nbh, followed instructions it says unable to find "nb OS", i have the 4 raw files, i upload them to somwhere any1 kno any good places
FIXED: jus need some place to upload.
i have the rom now, i use the setup utility and the rom version its showing is just "1" i dont kno if thats right and its only 125mb
iky10 said:
i'm having trouble creating the nbh, followed instructions it says unable to find "nb OS", i have the 4 raw files, i upload them to somwhere any1 kno any good places
FIXED: jus need some place to upload
Click to expand...
Click to collapse
Please do on Rapidshare
my orange rom dumped and turned into usable rom hopefully
http://rapidshare.com/files/191585731/ruu_signed.rar.html
Thanks for that.
Has anyone tested this
iky10 said:
my orange rom dumped and turned into usable rom hopefully
http://rapidshare.com/files/191585731/ruu_signed.rar.html
Click to expand...
Click to collapse
Thanks!
K_Hismoom
chand4u76 said:
Has anyone tested this
Click to expand...
Click to collapse
Flashes ok with the custom RUU wrapper and from the storage card in the the hard spl
Rom version is 1.19.61.1 WWE (says D 1.14.22273 on the boot up?) and it has an orange animation on startup, OS is 5.2.20757 (Build 20764.1.4.3)
Thanks for the rom!
Thnx for testing it for me, i was in abit of a doubt, any chance you can give more feedback wat your opinion is on that rom which i uploaded
pw120 said:
Flashes ok with the custom RUU wrapper and from the storage card in the the hard spl
Rom version is 1.19.61.1 WWE (says D 1.14.22273 on the boot up?) and it has an orange animation on startup, OS is 5.2.20757 (Build 20764.1.4.3)
Thanks for the rom!
Click to expand...
Click to collapse
iky10 said:
my orange rom dumped and turned into usable rom hopefully
http://rapidshare.com/files/191585731/ruu_signed.rar.html
Click to expand...
Click to collapse
Thanks, I'm thinking of flashing duttys rom at some point on my new HD can I use this to get back to stock orange in case i have to send it back? or will I have to extract my rom and rebuild that? (My HD is showing the same rom version 1.19.61.1 although slightly higher OS version of 5.2.20764)
iky10 said:
Thnx for testing it for me, i was in abit of a doubt, any chance you can give more feedback wat your opinion is on that rom which i uploaded
Click to expand...
Click to collapse
Only includes the OS, no radio. ROM seemed stable and quick once it was running but took ages for it to shut down - probably to do with it having to show the orange animation on shutdown.
radio can be downloaded from duttys website, and use that radio if u ever wanted to return the phone, make sure u download the correct 1
pw120 said:
Only includes the OS, no radio. ROM seemed stable and quick once it was running but took ages for it to shut down - probably to do with it having to show the orange animation on shutdown.
Click to expand...
Click to collapse
I have new uk orange htc touch 3g and it says JADE110 (not JADE100).
not sure of difference. hardsplv3 seems to work.
rom version is 1.71.61.12
rom date is 24/02/09
radio is 0.29.30.u23
protocol is 12.36.30.29.UMAH
os is 20765.1.4.4
Uploaded to rapidshare:
http://rapidshare.com/files/216675241/Part00.raw
http://rapidshare.com/files/216677855/Part01.raw
http://rapidshare.com/files/216686034/Part02.raw
http://rapidshare.com/files/216698855/Part03.raw
rgds
can u upload the radio?. thanks.
also part01.raw and part02.raw dumps.
thanks.
ironeagle said:
can u upload the radio?. thanks.
Click to expand...
Click to collapse
ironeagle said:
also part01.raw and part02.raw dumps.
thanks.
Click to expand...
Click to collapse
I don't know how to extract radio. However I have dumped part00 to part04.raw
Any suggestion on how to extract the radio from these
(see files for downloading below)
cheers
Uploaded to rapidshare:
http://rapidshare.com/files/216675241/Part00.raw
http://rapidshare.com/files/216677855/Part01.raw
http://rapidshare.com/files/216686034/Part02.raw
http://rapidshare.com/files/216698855/Part03.raw
i found this,may this can help you~
http://forum.xda-developers.com/showthread.php?t=359015
3G performance is improved for me.. . If you can dump the RADIO.. then its very good..
Will upload the ROM with this OEM build..
ivenhu4859 said:
i found this,may this can help you~
http://forum.xda-developers.com/showthread.php?t=359015
Click to expand...
Click to collapse
interesting thanks. looks like I have lots of reading to do this weekend ....
Added the ROM to http://forum.xda-developers.com/showthread.php?p=3336585#post3336585
Feel free to dump the radio into a new thread
Thanks
Dave
DaveShaw said:
Added the ROM to http://forum.xda-developers.com/showthread.php?p=3336585#post3336585
Feel free to dump the radio into a new thread
Thanks
Dave
Click to expand...
Click to collapse
great. Hopefully you can add a link to ironeagles more useful thread where he has made an nbh of the raw.
unfortunately, when I first got the Jade, after dumping the ROM, I tried out lots of the roms in this forum. The Asia WWE 721 release over-wrote my radio ROM (my stupidity). Unless we can get it back from the raw files, it is lost forever. Hopefully another person with the orange Jade could try and dump. They have recently been introduced in the UK but hopefully will sell well, so there should be lots around.
colonel said:
great. Hopefully you can add a link to ironeagles more useful thread where he has made an nbh of the raw.
unfortunately, when I first got the Jade, after dumping the ROM, I tried out lots of the roms in this forum. The Asia WWE 721 release over-wrote my radio ROM (my stupidity). Unless we can get it back from the raw files, it is lost forever. Hopefully another person with the orange Jade could try and dump. They have recently been introduced in the UK but hopefully will sell well, so there should be lots around.
Click to expand...
Click to collapse
oops.. the 3G was doing good for me in this build.. am i going to miss the radio?.. ( hopefully can get back the radio using raw , will create NBH.. )
do u managed to get the stock exe. thanks.
colonel said:
great. Hopefully you can add a link to ironeagles more useful thread where he has made an nbh of the raw.
unfortunately, when I first got the Jade, after dumping the ROM, I tried out lots of the roms in this forum. The Asia WWE 721 release over-wrote my radio ROM (my stupidity). Unless we can get it back from the raw files, it is lost forever. Hopefully another person with the orange Jade could try and dump. They have recently been introduced in the UK but hopefully will sell well, so there should be lots around.
Click to expand...
Click to collapse
I'd do it but I cant get hard SPL to work (dosnt seem to support Jade110).
sorry but how can i flash the raw files to my uk orange jade?
FR Radio Dump ?
colonel said:
great. Hopefully you can add a link to ironeagles more useful thread where he has made an nbh of the raw.
unfortunately, when I first got the Jade, after dumping the ROM, I tried out lots of the roms in this forum. The Asia WWE 721 release over-wrote my radio ROM (my stupidity). Unless we can get it back from the raw files, it is lost forever. Hopefully another person with the orange Jade could try and dump. They have recently been introduced in the UK but hopefully will sell well, so there should be lots around.
Click to expand...
Click to collapse
if you tell me how to do, and whrere to find the tools to... maybe i can find the french orange radio...
whats the difference jade 110 & jade 100
hi
i bought my jade around 15 days back in my country ie India it is called touch 3G yes it says jade 100 now i see many people from Europe on orange network talk of jade 110 can any one tell me whats the difference is it just the number or is their a real difference this is just for my knowledge
Thanks in advance
welshbloke70 said:
I'd do it but I cant get hard SPL to work (dosnt seem to support Jade110).
Click to expand...
Click to collapse
I had a problem with the HardSPL on a Jade110 too, untill i turned off Enable Faster data synchronization in Settings>Connections>USB to PC, and than flashed without issue
haree said:
hi
i bought my jade around 15 days back in my country ie India it is called touch 3G yes it says jade 100 now i see many people from Europe on orange network talk of jade 110 can any one tell me whats the difference is it just the number or is their a real difference this is just for my knowledge
Thanks in advance
Click to expand...
Click to collapse
Jade110 dosent appear to be any diffrent to a Jade100 except that the Jade110 Is the name orange gave it, bit like when they had nokia 5510's and called them nk405's or somthing like that lol
Also, id dump my radio rom but i was too eagar to flash it with a stock Jade rom to debrand all the orange rubbishnes on it
Could you please re upload the raw files... i could only download Part00.raw and Part01.raw
Thanks In Advance,
Etienne ....
DaveShaw said:
Added the ROM to http://forum.xda-developers.com/showthread.php?p=3336585#post3336585
Feel free to dump the radio into a new thread
Thanks
Dave
Click to expand...
Click to collapse
Post delelted!?!
Does anyone have Orange Touch 3G oficial 1.40 ROm?
Can you please reupload?
And would be nice to have nbh file, because raw is too complicated ((
This rom is from the Orange uk site rom is dated aug 09
http://www.business.orange.co.uk/se...=Phone&pagename=Business&t=SMEDeviceDownloads
Mod EDIT HDuser
Added to wiki
OrangeUK_HTCTouchHD_1.59.61.2_Radio_52.64.25.34_1.14.25.24_Ship_phone_software
End Mod Edit
zathrus1976 said:
This rom is from the Orange uk site rom is dated aug 09
http://www.business.orange.co.uk/se...geUK_HTCTouchHD_1.59.61.1_phone_software.exe"
Click to expand...
Click to collapse
i had no idea orange even release updates for Touch HD, i wouldnt even try it
Any one tried this yet?
I'm downloading it, its worth a look, can always flash back to 1.56
Just flashed, strange... The splash screen says:
Smart Mobility
Test Only
Not For Sale
ROM verion 1.59.61.1 (48753)
uses radio 1.14
wm6.1 build 20769.1.4.5
Opera Version 9.5.16703
AGPS is enabled by default.
seems ok for a stock rom
youtube player is pretty decent, didn't stop once during a 4 min video
no activesync popup like the old ones
I'm just away to try blackberry connect on it to see how it goes
thank you for the ROM
Thank you for the ROM! It says on boot (just under the smart mobility part)something like "test version, not for sale". Obviously, it's made out of very old "components" (TouchFlo 1.3, etc) but, to be honest, this ROM is quite fast, and more important (for me) there's no lag on input keyboard, I almost forgot how good it is, without lag when typing
I think I may keep this for a week or two and see how's going. Right now I think it's the fastest ROM that I ever saw on Blackstone.
pw120 said:
I'm downloading it, its worth a look, can always flash back to 1.56
Just flashed, strange... The splash screen says:
Smart Mobility
Test Only
Not For Sale
Click to expand...
Click to collapse
How do I get rid of the "Test Only".... I flashed this ROM, didn't like it and then flashed Dutty's R12 but the Test Only is still there.
I saw someone mentioned something about an nbh file elsewhere but not how to get it.
Thanks
This is Touch Flo 3D Version 1.3.37395.3_1630.38 from Windows 6.1 Professional CE OS 5.2.20769 and ROM version 1.59.61.1 (48753) WWE dated 06/10/09. Its is a very old rom but my word is it quick!
Seriously this is quick.
H
It does however come with a program called "video player" which is version 05.20.25.01 and possibly quite old, however its is excellent at playing judder free video recorded on the HD!.
Maxwell Smart said:
How do I get rid of the "Test Only".... I flashed this ROM, didn't like it and then flashed Dutty's R12 but the Test Only is still there.
I saw someone mentioned something about an nbh file elsewhere but not how to get it.
Thanks
Click to expand...
Click to collapse
do a couple hard resets
Maxwell Smart said:
How do I get rid of the "Test Only".... I flashed this ROM, didn't like it and then flashed Dutty's R12 but the Test Only is still there.
I saw someone mentioned something about an nbh file elsewhere but not how to get it.
Thanks
Click to expand...
Click to collapse
flash new splash screen.
or just flash stock rom, then flash any rom you want.
DRTigerlilly said:
do a couple hard resets
Click to expand...
Click to collapse
6 resets still haven't cleared it
you shouldn't flash new rom if you don't know exactly about it
I'm taking a guess here (just a user, not a chef), but perhap's Dutty's Rom doesn't change the splash screen, but other ROMs might?
maybe, try miri rom 6.5 with orange splash screen
tried tricolour blue 6.1 and miri 6.5 26.3 and no joy
reinstalled HSPL 1.56 and no joy!
damn you orange, its the latest official rom for my phone (bought on UK Orange originally)
Of all the possible problems that can happen during the countless roms I've tried eg sd card missing, bricking etc, I can't believe that its an official rom thats giving me problems ! unbelievable
Why would they put this crap on it.
Try an official 1.56 rom.
I don't know if this would help?
http://forum.xda-developers.com/showthread.php?t=469146
SOLVED
Just flashed HTC Europe 1.56.401.0 and its fixed
Thanks for all help
Nice find, just need my replacement HD to hurry up and arrive today from Orange and I can start flashing again. Is there any proven way to get rid of the Test message? Thanks to the original poster
Hello, I need an original TMO ROM NLD for return. I already reconstructed the orignal raw files for the os.nb now I only need the splash and radio. If someone can provide me a TMO splash preffered from the NLD rom and radio information so I can return to origin.
Thnx in advanced
There must be somebody with a TMO splash! Or provide a link to an TMO TP2 original rom from any kind of country or knows withs TMO rom has the same splash.
And to the dutch user maybe some can provide the radio version (I don't need a specific link for the radi, I think I can find this somewhere on the board)
Dumping Splash screens isn't easy (I've nver figured it out )
Can't you extract it from the shipped ROM here instead : http://forum.xda-developers.com/showthread.php?t=550975
Dave
Thnx for the reply, I'm downloading now, I let you know
Too bad no splash included, still need a original splash
Sorry, took a few reads to figure out it's not a shipped ROM, it's a reconstructed Dump.
Try looking at the T-Mobile websites for a Ship EXE, I'll see if I can figure out how to dump .
Or try another WVGA device. Here's the Germal T-Mobile Ship Exe for the Topaz - http://rapidshare.com/files/2564964...Signed_Topaz_61.20t.25.10_3.43.25.19_Ship.exe. No one should notice, unless the splash says what device it's from .
Dave
Hahaha I already thought and did the same thing, it is finisched and it works.
I'm uploading now so that if someone needs to return their Dutch MDA V can use it.
Hi
Were you ever able to get the original T-Mobile splash screen? I need to send my phone in and was unable to get my splash screen back to the stock T-Mobile one. I have a T-Mobile US Rhodium and I have been looking around but was unable to find the one for my phone.
http://forum.xda-developers.com/showpost.php?p=4404372&postcount=58
Thank you
You are a better searcher than I. But hey, at least I didn't create a new thread, right? Thank you.
joshkoss said:
http://forum.xda-developers.com/showpost.php?p=4404372&postcount=58
Click to expand...
Click to collapse
Thanks.........
T-Mobile (NL) Mda Vario V 6.5 update
T-Mobile Dutch released a 6.5 Update a while back...
Original XDA Thread HERE
T-Mobile (NL) Mda Vario V 6.5 update - DOWNLOAD HERE