Related
Is charging our Kaisers from the PC ok? How much power does the USB provide to the Kaiser? Same as the standard adapter? I am asking this because I found no answer on the forum and I would prefer to load it directly from the PC every time rather than keep using the standard charger and putting it in the power outlet.
my advice for you to stop this option
because normaly we keep the phone connected to the pc for a long time and it makes the phone in charging mode all the time and iam sure that will make the battery dies fast
stop this option by disabling it from the battery options you can see it by clicking on the battery icon on the start bar
greetings
My phone has been plugged in to the USB at work all day, 5 days a week, for 5 months now. I can still get about 2 days out of the battery when I need to - for instance, after unplugging it each Friday at 5 I usually won't have to charge it until the same time on Sunday, the only time it generally does get plugged into the wall charger. I'm pretty sure my battery performance is still on a par with most people's - ie, not amazing, but quite livable with. It's certainly not showing any signs of harm from overcharging.
Boinng said:
My phone has been plugged in to the USB at work all day, 5 days a week, for 5 months now. I can still get about 2 days out of the battery when I need to - for instance, after unplugging it each Friday at 5 I usually won't have to charge it until the same time on Sunday, the only time it generally does get plugged into the wall charger. I'm pretty sure my battery performance is still on a par with most people's - ie, not amazing, but quite livable with. It's certainly not showing any signs of harm from overcharging.
Click to expand...
Click to collapse
Same here.. no problems. I don't even know where my charger is.
I charge mine from the PC all day too, and it stops charging when its at 100%. The bottom line is this: a USB port delivers a minimum of 500ma at 5v, the wall charger is probably very close if not more than that. The charging circuit in the phone does all the work of converting the 5dc into a charging voltage/current required by the battery, usually ramping up and down. Theres no difference other than maximum current between a USB port and ANY 5vdc adapter.
Wall wart gives 5V/1A. USB at 5V/500mA will not harm your battery. If you're using the standard battery, USB charging is appropriate to keep it topped up.
RMD
Isn't the constant charging of the batter bad for it?
I mean you charge it use it for a while then hook it up again and so on, isnt it better for the battery if you wait until it says that you have to recharge it?
According to my BatteryStatus, my wall charger gives me around +500-600mA (depending on programs running) and USB 2.0 charging from the front port on my computer gives about +100-300mA (depending on what's plugged into the computer and program usage).
Insaneboy said:
Isn't the constant charging of the batter bad for it?
I mean you charge it use it for a while then hook it up again and so on, isnt it better for the battery if you wait until it says that you have to recharge it?
Click to expand...
Click to collapse
That was a nicad battery issue lithium batteries do not have that issue.
-McMex
i think the point here is not if you charge it by usb or charger
for many people as they said it goes as well ok but it's an old advice used to be known that it's not good for your battery health to be on the charger all the time
also the same fact that it's always better to let the battery goes empty before you recharge it again some people have the sickness of recharging batteries when it's just gets 5 percent less , then they immaditaly start to recharge it again and this is a big mistake because in the long period the first levels of the battery start to die because they have never been used
mcmexican said:
That was a nicad battery issue lithium batteries do not have that issue.
-McMex
Click to expand...
Click to collapse
Didn't know that.
Thanks.
haam1978 said:
the same fact that it's always better to let the battery goes empty before you recharge it again some people have the sickness of recharging batteries when it's just gets 5 percent less , then they immaditaly start to recharge it again and this is a big mistake because in the long period the first levels of the battery start to die because they have never been used
Click to expand...
Click to collapse
Actually, its quite the opposite of what you say. If you let Lithium batteries discharge all the way, they will loose their capacity faster.
The following link will back up my claim:
http://batteryuniversity.com/parttwo-34.htm
Relevant quote: "Avoid frequent full discharges because this puts additional strain on the battery. Several partial discharges with frequent recharges are better for lithium-ion than one deep one. Recharging a partially charged lithium-ion does not cause harm because there is no memory. (In this respect, lithium-ion differs from nickel-based batteries.) Short battery life in a laptop is mainly cause by heat rather than charge / discharge patterns."
usb v wall charger
My kaiser
wall charger charges battery from flat (1%) in 1 hour
USB on PC takes 4 hours to go from 15 to 80%, only over night did it get to 100%.
I use wall charger everyday now.
axonn said:
Is charging our Kaisers from the PC ok? How much power does the USB provide to the Kaiser? Same as the standard adapter? I am asking this because I found no answer on the forum and I would prefer to load it directly from the PC every time rather than keep using the standard charger and putting it in the power outlet.
Click to expand...
Click to collapse
i use the pc option especially when i am traveling and only have my portable. When using my portable, i plug my phone in to get a charge... i like this option as it saves me from having to lug around another adaptor as well as being able to charge my phone just off the batteries of my portable at any time,,,, good option
posted twice --- as usual being a post hog
It's fine. It just takes longer to charge, especially if you're transferring a lot of data.
With the lithium ion chemistry, it is very detrimental to the battery if you let it run down to empty all the time. The batteries do not like this at all and will exhaust much quicker this way. If you were to store the batteries, you should store them at 40% in a cool place as that would only lose 2% of life per year I believe. At 100% storage, you can lost 20% a year of life. A little reading at that battery university website goes a long way
johnny13oi said:
With the lithium ion chemistry, it is very detrimental to the battery if you let it run down to empty all the time. The batteries do not like this at all and will exhaust much quicker this way. If you were to store the batteries, you should store them at 40% in a cool place as that would only lose 2% of life per year I believe. At 100% storage, you can lost 20% a year of life. A little reading at that battery university website goes a long way
Click to expand...
Click to collapse
So what happens when your battery that you leave stored at 100% loses 20% a year and a few years later it hits 40%?
Battery
haam1978: You are surely right for NiMh. But I don't know about Li-Ion. Time will tell. For now, I prefer to do it your way: discharge almost completely, BUT NOT TO 0%. Mostly to 5 - 10%. But the problem is that my stupid Windows doesn't report the life of the battery accurately ::- (. I got a Mugen 3000 Mah batt...
rotohammer & johnny13oi: Interesting website indeed. Unfortunately as I told haam, I can't get an accurate battery reading for this huge battery I got. Anyway, I'm still reviewing it ::- D.
rotohammer said:
Actually, its quite the opposite of what you say. If you let Lithium batteries discharge all the way, they will loose their capacity faster.
The following link will back up my claim:
http://batteryuniversity.com/parttwo-34.htm
Relevant quote: "Avoid frequent full discharges because this puts additional strain on the battery. Several partial discharges with frequent recharges are better for lithium-ion than one deep one. Recharging a partially charged lithium-ion does not cause harm because there is no memory. (In this respect, lithium-ion differs from nickel-based batteries.) Short battery life in a laptop is mainly cause by heat rather than charge / discharge patterns."
Click to expand...
Click to collapse
100% correct.
On a side note, my kaiser will get fully charged way faster when connected to the wall as opposed to USB. (always connected to a desktop with a real big UPS).
I just got a brand new SGS, and one question puzzles me. On the old phones, you would need to format the battery. Is this still needed ?
we have mixed opinions in this forum.
personally i don't really care which one is truth, because i cycle through 3 ~ 5 battery packs
and i use them all until they are dry (when the phone POP up and warns you 10% left)
Li-Ion battery does not suffer the same problem as the old nickel-metal hydride and nickel-cadmium (the old ones requires training)
http://en.wikipedia.org/wiki/Lithium-ion_battery
however there are members of this board that believes Li-Ion & Li-Po batteries still requires to be trained
The only truth behind either case, is that the more you leave the USB connected to the phone
the more your battery will get WASTED, that reduces the life cycle of your battery
it can easily be proven, if you leave a phone connected all the time to a power source, and you disconect it after a few months
the life of the battery gets shortened due it's contant charge & recharge cycles
that's why Android OS put a cap on battery full dectection, so that when the battery is fully charge, it WARNS you to disconect the phone, to prevent battery damage.
Android OS actually regulates the battery charge, by stooping further charges until it detects it's less than 99%, the only problem with this is that if your phone is dead (bricked) it will not charge the battery even if you leave it plugged as the OS is not running.
that's why using a wall charger to charge the phone is better
i'm using this kit here
http://forum.xda-developers.com/showthread.php?t=733705
Thanks for the detailed reply.
One more thing to add. A battery can be formed, not formated.
Got it. Thanks.
( meaning how many months before the battery loses storage capability, as opposed to "battery life" - how many hours until you run out of juice )
There are a lot of battery/charger threads, and some bright person actually looked up the TI charger circuit documentation, but I don't see anyone who has looked up what a li-ion battery needs to have a long lifetime.
So, I found information at:
http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries
Interesting tidbits:
- Charging to 100% means that you can use the device longer the next day, but is not necessarily best for the battery itself. Frequent partial charges are just fine, and are actually better for the battery.
- It seems to be particularly important for Li-ion battery charging to be turned off when you get to 100%. The LED turning green in the NC cable shows that the system is taking care of this (so you can safely charge overnight without damaging the battery).
Connecting the NC to another system that does not stop applying current at 100% charged seems to definitely be a bad idea. So, don't use any system overnight, that the NC does not recognize as "charging".
This indicates that charging from a laptop USB may "work" but may be bad long-term for the battery. Here it depends on whether the TI charging circuit is sophisticated enough to adapt to the non-standard condition. Since the charging indicators do not indicate "charging" then the answer may be "no", and while you are getting the battery charged up, it may not be in the best way. (This seems to be an area for more research about the actual NC charging system.)
- The critical part is to not use a USB cable or other charging system that is not recognized by the NC, when the NC is close to 100% charge, to make sure that it doesn't overcharge the battery. As the article states:
Li-ion cannot absorb overcharge, and when fully charged the charge current must be cut off. A continuous trickle charge would cause plating of metallic lithium, and this could compromise safety. To minimize stress, keep the lithium-ion battery at the 4.20V/cell peak voltage as short a time as possible.
Click to expand...
Click to collapse
- So, in summary, I think that a different brand of charger is okay as long as the NC recognizes it as "charging", and one should avoid charging in situations where you are "fooling" the NC by charging the battery when the NC is not noticing.
I honestly had no clue about this lol, thanks!
This might save a lot of headaches with "bad batteries" in the long run.
Thanks for this! Very interesting.
Well said, ADude. I'm so used to having to go onto forums and set people straight on the "myth's" of battery charging, but you hit it right on. The most important thing to remember is that overcharging drains your battery life (but most modern tech has auto off, in which it goes into a low power mode that allows for a stable current to just keep it around 99%), there is no benefit to letting your nook (or any other device) die completely before charging again, as there is not benefit to charging fully (or not charging fully) in the long run.
Thanks again!
LiIon likes being charged early and often... Don't run it down to 20-30% every time, it'll only shorten the overall battery. If it's down to 40-50% at the end of the night, put it on the charger.
Mine lasts 3 or so days before it gets near 40%.
Limiting the battery charge to a fraction (70%-80%) of it's full capacity is a well known way to greatly extend the battery's charge capacity lifetime. There are several (root) apps created to automate this, that stop the phone from charging once a selected charge level is reached. Battery Charge Limit is one (https://forum.xda-developers.com/android/apps-games/root-battery-charge-limit-t3557002), ACCA is another (https://github.com/MatteCarra/AccA/). So far I have not been successful getting either of those to work with the ROG2. I was wondering if anybody has had any success with those apps or any other way to limit the battery charge on the ROG2?
The Rog phone 2 has its own function that lets you automatically stop charging.
But keep in mind this function is only useful if you are planing to keep the phone connected to a charger 24/7 then it's useful. Otherwise it's worthless if you disconnect your phone once it's 100% charged.
Battery also needs to discharge and recharge to keep it's capacity and function going. If you don't do this it can wear the battery out even if you stop charging at 70-80%.
Jake.S said:
The Rog phone 2 has its own function that lets you automatically stop charging.
But keep in mind this function is only useful if you are planing to keep the phone connected to a charger 24/7 then it's useful. Otherwise it's worthless if you disconnect your phone once it's 100% charged.
Battery also needs to discharge and recharge to keep it's capacity and function going. If you don't do this it can wear the battery out even if you stop charging at 70-80%.
Click to expand...
Click to collapse
Most of what you said is wrong.
The ASUS Power Master Battery Care feature slows and delays the charging but still charges to 100%. The feature is only useful if you have a regular charge schedule (which I don't, and DO mostly leave the phone on the charger) and even then, it's still charging to 100%. Repeatably charging a LiPo battery to 100% WILL decrease it's capacity significantly faster than if only partially charged. All phones already slow charging at high charge levels. There is no advantage to discharging the battery.
Read and learn: https://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
If you can reference any authority to support your position, I'd love to see it.
MyronAz said:
Most of what you said is wrong.
The ASUS Power Master Battery Care feature slows and delays the charging but still charges to 100%. The feature is only useful if you have a regular charge schedule (which I don't, and DO mostly leave the phone on the charger) and even then, it's still charging to 100%. Repeatably charging a LiPo battery to 100% WILL decrease it's capacity significantly faster than if only partially charged. All phones already slow charging at high charge levels. There is no advantage to discharging the battery.
Read and learn: https://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
If you can reference any authority to support your position, I'd love to see it.
Click to expand...
Click to collapse
Did you ever know that even authority can be wrong in facts as well? I can confirm that battery feels alot better with discharge and charge than what it is with 100% all time or 70-80%.
How I can confirm is that I have a Microsoft surface Pro 4 and when I kept it on charger at 100% for a day or two the wear level jumped from 0% to 3% but when I discharged it and recharged it after some time then tear level on battery went back to 0% and capacity was back to its full capacity again. So discharge and recharge does not always wear the battery out. It actually makes battery feel better too.
So please don't always believe what internet and what authority States. Since on internet there is alot of false facts and authority gives alot of nonsense facts alot of times too.
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
dennis96411 said:
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
Click to expand...
Click to collapse
Wise? Absolutely. Is it the perfect solution for everyone? No
dennis96411 said:
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
Click to expand...
Click to collapse
Yes, heat is a factor, but keeping the battery at 100% will degrade the battery faster regardless. If you simply do not need the additional 20% than there is no advantage to charging to 100%. My usage scenario is that the phone is plugged in a lot of the time and I very rarely need the full battery capacity. I've had several phone batteries bloat up under this scenario (and not using any fast charging).
When batteries degrade they don't stop at 80%. They generally keep degrading fairly rapidly. And you don't just lose capacity, as the battery degrades the internal resistance increases, which results in throttling and/or crashing.
BTW on some phones, ACCA will stop charging the battery when it reaches the desired charge level and run the phone entirely from external power.
willhemmens said:
Wise? Absolutely. Is it the perfect solution for everyone? No
Click to expand...
Click to collapse
Agreed. If manufacturers still offered replaceable batteries in their flagships, this would be somewhat of a moot point. When dealing with a sealed battery that is expensive and time consuming to replace, it's wise to do everything reasonable to protect the overall lifespan of it.
As for keeping it charged at 100%, I did that once and killed a battery in about 6 months. Not doing that one again.
Guys, it's so nice you are debating over the battery charging metaphysics but it does not help us solve the issue: our rooted phone can not be charged in a smart way using magisk+acc, ACCA or Battery Charge Limit.
Any ideas?
I'm facing issue with my Rog 2, my phone is not charging fast
1. I'm using 18w charger come with the phone to charge
2. I have used Xiaomi 2i power bank with 18w output to charge my phone (still not working)
3. I restart the phone on charging it goes down 36% to 29%
4. On charging when i restart the phone it goes 8% to 13%
5. I'm facing this problem from the yesterday
6. Double plus sign on battery icon as well as fast charging text on home screen is also not showing while charging
What is the issue please help anyone
Submit a bug report to acca and maybe at least someone starts caring for the ROG Phone. The reason why it doesnt work is simply because ASUS does its own stupid thing while charging (thats what happens when 100 OEMs cook their own soup, a mess).
About the battery health:
A battery keeps its best health when its charged between 25-75%, is kept below 30°C and charged as slow as possible. Thats why its wise to stop charging at 80% with a slow charger, especially when you have a big battery anyway that lasts for a day with 80% charge.
Himan99 said:
I'm facing issue with my Rog 2, my phone is not charging fast
1. I'm using 18w charger come with the phone to charge
2. I have used Xiaomi 2i power bank with 18w output to charge my phone (still not working)
3. I restart the phone on charging it goes down 36% to 29%
4. On charging when i restart the phone it goes 8% to 13%
5. I'm facing this problem from the yesterday
6. Double plus sign on battery icon as well as fast charging text on home screen is also not showing while charging
What is the issue please help anyone
Click to expand...
Click to collapse
currently facing the same issue and this is the first time in 2 week time. though on the lock screen, it shows fast charging.. but it isnt working smh
apollo3x said:
currently facing the same issue and this is the first time in 2 week time. though on the lock screen, it shows fast charging.. but it isnt working smh
Click to expand...
Click to collapse
Change the cable and try also try with different fast charging adapters or fast charging powerbank(mi power bank)
My problem solve by changing the cable
---------- Post added at 03:55 AM ---------- Previous post was at 03:54 AM ----------
MyronAz said:
Limiting the battery charge to a fraction (70%-80%) of it's full capacity is a well known way to greatly extend the battery's charge capacity lifetime. There are several (root) apps created to automate this, that stop the phone from charging once a selected charge level is reached. Battery Charge Limit is one (https://forum.xda-developers.com/android/apps-games/root-battery-charge-limit-t3557002), ACCA is another (https://github.com/MatteCarra/AccA/). So far I have not been successful getting either of those to work with the ROG2. I was wondering if anybody has had any success with those apps or any other way to limit the battery charge on the ROG2?
Click to expand...
Click to collapse
Without root any chances
Because i don't want to root my phone
Himan99 said:
Without root any chances
Because i don't want to root my phone
Click to expand...
Click to collapse
There is no programmatic way to internally control the charging process without root, however there are some (not as good) alternatives.
First there is an app Accubattery that will give you a notification when the battery reaches a given level, you have to then disconnect the charger manually.
A second way to do this would be to use a smart plug and control it with Tasker. Don't know if anyone has done this but it should be possible.
Another possibility that is not vailable yet would be a kickstarter project called BatteryPal. This is a charging cable that had a bluetooth interface built in to it that would control charging using an app on the phone.They arr saying it will be available March 2020, but who knows.
I'm facing the same situation here. I'm next to a charger most of the time, so I like to use slow charging and not going above 80%. I was used to have battery charge limit installed in all my devices, but found this is not working with the rog phone.
My rog Phone 2 global edition over heats while charging
has anyone found a way even with root? I've tried ACC and some other app but they all done work.
I've also just tried ACC and Battery Charge Limit, but neither worked. It looks like there is something that keeps overwriting the charge control file all the time and allows the battery to charge anyway. Battery Care was disabled while doing this.
I am rooted, so I am able to test any potential solution.
Someone posted on r/rogphone2 a solution for this:
https://www.reddit.com/r/ROGphone2/comments/ev0put/hows_this_it_never_reaches_100/
I've just tested it and it works for me.
Does anyone know of a legit charging adapter that isnt fastcharge and doesnt damage the phone or gets damaged itself after a while? I want to charge my phone without fastcharge but cant find a good charger
My old htc m8 charger got damaged after just a few times of using! Seems like the phone drained it dry
While at work, I leave my phone plugged in and charged at all times.
I don't have exact temperatures but I've noticed that it is warm the whole time. Anyone else notice this?
blazinazn said:
While at work, I leave my phone plugged in and charged at all times.
I don't have exact temperatures but I've noticed that it is warm the whole time. Anyone else notice this?
Click to expand...
Click to collapse
Are you using the official charger?
Some aftermarket USB C cables can damage your phone or even fry it completely.
If you are using a standard charger, I'm more inclined to say your phone is getting warm because the battery has been charging. If you have hotspot on, that can warm your phone up quite alot too... Basically the more your phone is doing the hotter it can get (Bluetooth/wifi/hotspot etc)
FYI: charging to 80/90% will make your battery last alot longer too, if you plan on keeping it a few years. Charging to 100% is the fastest way to degrade your li-ion battery.
If you are rooted you can limit your charge to 90% but depends if you don't have access to a charger all day you might need that 100%.
Hope that helps.
Demolition49 said:
Are you using the official charger?
Some aftermarket USB C cables can damage your phone or even fry it completely.
If you are using a standard charger, I'm more inclined to say your phone is getting warm because the battery has been charging. If you have hotspot on, that can warm your phone up quite alot too... Basically the more your phone is doing the hotter it can get (Bluetooth/wifi/hotspot etc)
FYI: charging to 80/90% will make your battery last alot longer too, if you plan on keeping it a few years. Charging to 100% is the fastest way to degrade your li-ion battery.
If you are rooted you can limit your charge to 90% but depends if you don't have access to a charger all day you might need that 100%.
Hope that helps.
Click to expand...
Click to collapse
Yes, using the official charger. I also failed to mention that I have a case on my phone. Not sure if that is contributing to it.
Is it because charging to 100% counts as a full cycle? I will admit that I'm not up to snuff on battery tech and what the best way to preserve the battery long term. From my past understanding, if you take your battery all the way down and then charge it to 100%, then that was a full cycle. More cycles = degraded battery over time.
Not sure if this still holds true for li-ion batteries today.
Edit: My thought here is to leave it on the charger whenever I can, thus minimizing the cycles I put on the battery.
blazinazn said:
While at work, I leave my phone plugged in and charged at all times.
I don't have exact temperatures but I've noticed that it is warm the whole time. Anyone else notice this?
Click to expand...
Click to collapse
blazinazn said:
Yes, using the official charger. I also failed to mention that I have a case on my phone. Not sure if that is contributing to it.
Is it because charging to 100% counts as a full cycle? I will admit that I'm not up to snuff on battery tech and what the best way to preserve the battery long term. From my past understanding, if you take your battery all the way down and then charge it to 100%, then that was a full cycle. More cycles = degraded battery over time.
Not sure if this still holds true for li-ion batteries today.
Edit: My thought here is to leave it on the charger whenever I can, thus minimizing the cycles I put on the battery.
Click to expand...
Click to collapse
My suggestion is download accubattery, it will tell you your battery temperature and also it calculates the degredation and health of your battery. It will also explain how many cycles of wear you are adding to the phone.
Back in the old days with nickel cadimium batteries you needed to do the whole 0-100 thing, that was good for battery memory... But modern day lithium batteries actually are better being topped off and kept between 20-80% in an ideal world. So deep discharges and high % charges wear out your battery significantly faster... This is why electric cars often limit charge, by doing this they can extend the life of the battery cells quite dramatically.... but if you are upgrading yearly, don't worry about it.
Here is an article that will help you.
EDIT: try charging with and without the case and see if it gets hot, definitely cases can be an insulator. You can monitor temp in accubattery.
https://www.wired.co.uk/article/how-to-improve-battery-life-tips-myths-smartphones
The idea that there is a set number of charging cycles for a particular battery, and every time you charge the phone you use up one of those cycles regardless of how much it charges (ie a 10% charge and a 100% charge both use one charging cycle) isn't how modern cell phone batteries work.
As noted, it is best to not charge your phone to 100%, nor do you want to discharge your battery to 0%. It is best to charge it more frequently for a smaller amount of charge each time as well. So charging a phone 10% ten times is better for the better than charging the battery once for 100%.
Heat is also a huge problem with batteries and the hotter a battery gets, the shorter life expectancy it will have. So definitely look into the issue.
If rooted, there are a couple of Magisk modules that control charging. They usually will automatically pause charging if the battery gets too high of a temp. Once a preset time has passed, it will restore charging again. The idea being that the pause in charging will allow the battery temps to drop. You can also limit the battery max charge to another value other than 100% if you want. 80% max charge is suppose to be the sweet spot for battery longevity, but anything less than 100% is going to add life to your battery.
Just so you know the phone does not charge to 100% or allow you to discharge the battery completely. Your phone just shows that you are at 100% when charged as much as allowed and discharged as much as allowed when you reach 0% charge. The partial charge thing no longer has much of any effect since the phone is doing it for you already but the internet hasn't' caught up to that yet. These chargers do stop charging at full and your phone should not be warm if it's charged but unused. So... are you using while on the charger? That's not a great idea because it's going to kick it into charge over and over. The fellow above was correct about using proper cables, I'm not sure that's much of a problem anymore but there still may be some ringers on Amazon and elsewhere. You could also have something discharging the battery enough to get it to charge continuously or close enough to it to warm the phone up over time, a wake lock can do it for example. Those can keep the phone on charge enough to warm it up.
In general with charging it's going to be best to keep your charging and total cycles down because capacity loss during charging is a real issue due to physical deterioration and transfer of materials in the battery caused during the charge. You would be better served by allowing it to discharge at least somewhat and only charging as needed rather than keeping it plugged in. Since you're at work it should be fairly easy to plan your charging so that you'll be able to get through the day without the constant charge. Not saying wait until it dies and then charge, that would be inconvenient, just that you would get more life if you reduced your charge cycles.
No matter what your phone is getting warm something needs to be addressed if it's doing so when not used but plugged in. The charger should stop for long periods and the phone should be cool after the charge completes.