Ok, I'm a complete newbie at phone modding... I have read numerous websites and tutorials and posts on how to upgrade my Touch Diamond to Windows 6.5 but i fail. I fail miserably.
My Touch Diamond is an Orange UK Handset with Windows 6.1, about a month ago i upgraded my phone with an official Orange HTC ROM, so I'm currently at version 1.93.405.1 WWE...
Ok so my problem...
I used Olinex HardSPL version 1.38 and I can access the bootloader screen. Easy.
I then try install the Radio, Currently installed is 1.00.25.05 as standard, so I try install the same one again... The connection to my device is active and the screen goes black as the RUU does its thing, then.... nothing! the percentage bar on my PC stays at 0% and my phone is black.
So i think damn it ill try installing the ROM anyways as I already have the Radio version i want, and when the RUU starts the percentage thingy again... its stopped again at 0% and my phone now also says 0% and i check device centre for the connection and its not there... NO CONNECTION! so...
please... tell me where Im going wrong, do i need to CID the phone?
any help would be appreciated, Thanks in advance.
Related
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hi guys,.. i have been trying to upgrade my P3600 over 2-3 weeks now but i reach the same problem always, and that is simply.... I have managed the RADIO Rom to 1.41.00.111, but when i try to update the operating system.. with... Lvsw 2.0.1.1 / Mary 2.0 / PDAVIET 3.00.07.09 ... everything goes far with the updating.. i can see the progress bar, it reaches 100%, the screen on my mobile goes black... and it says on my computer to follow the info on my mobile and close the update application.
Now at this time my mobile is totally black (shut off i guess)... i have waited for more than 5 minutes but since nothing happens, i have restarted the mobile with a soft rest... but after the rest i still have my OLD operating system....
What am i doing wrong?.... I have read through bunch of threads on the forum, but haven't seen anyone else whom have had this problem.. or is it simply that i should wait even longer time and the mobile should start up by itself?....
Appreciate any help & suggestion...
can anyone help me?...
I've tried to update my HTC3600, by using the "WM6 Official - Any Device" from http://trinityguide.info, and it just doesn't work... I have updated Hard-SPL, and then tried to apply "Official Dopod ROM" ... the only thing it did was to revert my Radio-ROM back to 1.46.xxx (from 1.50.xxx i had before)...
But the OS was never updated to WM6... I have tried a bunch of different WM6 ROMs now during the weekend, nothing has helped... even tried some application to unlock CID (what is it actually ???).
The only thing I've managed is to update my own OS using the official swedish ROM (I've bought my HTC in sweden). And i've been able to update my Radio ROM to 1.46.xxx, 1.50.xxx.. as well as installing different HARD-SPL.
But i've so far not been able to install ANY WM6, or WM5 cooked ROM's .. so pleaaaaaaase help my guides... I'm starting to go nuts over this...
Appreciate any advise & help.. thanks in advance !
Hi All
Owning a Vario III and using Hardspl I upgraded to the latest incarnation of HTC's ROM (WM6.1). Having been caughtout with the freezing issue and after reading some posts about removing Hardspl I began to do so.
After reading the Idiots guide which stated :
'2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)'
I couldnt locate a proper T-mobile Wm6.0 ROM so thought as I'm just getting rid of the Hardspl I'd use the standard HTC ROM WM6.0 which went on fine.
This allowed to rid my phone of the HARDSPL.
I was then getting the Vender ID error when trying to load the new WM6.1 HTC ROM (which of course I would get as HARDSPL had been removed).
I then thought sod it and Ran SSPL-KAIS.exe and then began to run the latest HTC ROM. It started fine but bombed out at 15% and then I was left with a Tri-color screen and the message below :
In the Upper right hand corner it says RUUNBH
On the left side a little lower it says
KAIS1*0
SPL-1.56.0000
CPLD-8
At the bottom of the screen if I have USB plugged in it says USB, if nothing is plugged in it says Serial.
I cant seem to run MTTY 1.16 or 1.42 as I'm using Vista and the processes are slightly different (though I stopped what I thought were the relating ones to no affect)
Anyone on this awesome forum got any bright ideas as to how I can resurrect this one ?
btw : if I/we do manage to fix this one, do you think it will be possible to a) have a copy of the OEM T-mobile ROM ?? b) still upgrade to latest Wm6.1 ROM without the need for Hardspl ??
Cheers all
Steve
RUUNBH errors are from incomplete flag clearing after a flash. All that is needed is MTTY, 1.42 is best, & a few commands.
The first command is:
cmd>set 16 0
The second based on what SPL you now have (1.56) is:
cmd>boot
For use with Vista, you'll need to follow the dirsections used to flash via vista, & roll back the USB drivers. Do a search for Flashing with mtty and vista in google.
FANTASTIC !!!
Many many thanks for your prompt help !. Magic.
Im back up and running thanks to you brilliant help .
Do you think its worth trying again to Flash the phone using SSPL-KAIS and the latest HTC ROM ? or do u think I should quit whilst I'm back up and running ?
Alternatively, is there a way for me to sidestep the T-mobile lock without using HardSPL ?
Apologies for the questions, but after reading the many many posts on this, my brain is deffo boggled !!
Big thanks
Steve
Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx
Read the stickies in the ROM Development section.
Just download and install HardSPL then the ROM of your choice.
faz786 said:
Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx
Click to expand...
Click to collapse
once unlocked flashing it won't lock the phone.....once its open its open
look at my signiture and try what i use
but please read the all the info given before you start
if you do...all is well...if you don't...you could brink the phone...
good luck!
thnx i give it a go
thanks for all of your input i give it go see how it goes if i brick my phone then guess i'll be stuffed. lol
no luck error 260 and 202
Hi, i did the same as u told me i downloaded the HardSpl developers edition 1.40 and tried to run it but in the 3 stage it says diamond not connected with active sync but it is connected. don't know what the problem is i even tried different versions of hard Spl etc
regards
I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.