Have no idea what your doing? Read this! - Wing, P4350 Herald Upgrading

Now I'll begin by stating that I know very little about flashing and as much as the great people have tried to explain things. Its all a bit cryptic! especically when you see/read updates here and there. I did try to use the tutorial at the start of this thread (seemed easy enough) but hit a wall when I couldn't work out what I was supported to run RUU? Anyway I did find what I'd have to say is the perfect (read easiest) way to do these flashes. Its all based on the stuff the very smart people here have put together but is presented in a more 'user friendly' manner.
Visit: http://thewingster.com/roms.aspx
Choose your ROM (Wing or Touch Pro), I have a Wing and went with the following which allows you to choose what you want. I found choosing everything wasn't a good choice! So I went with the base, then I can install what extras I need afterwards.
http://thewingster.com/choic3s_1.aspx
Then follow the very easy instructions here:
http://thewingster.com/howtoflashnbhuspl.aspx
Note you dont have to worry about doing HardSPL and the like (it must do that as part of the manger software - and you can run it multiple times!! I did as I write I'm on my 3rd ROM!!)
Then you're good to go! I wish I'd found this and 'understood' how easy this was. Kudos to the wingster for doing this, just wish he'd make it even more obvious how easy it is to do! (remember we're all paranoid about bricking our phones!)
Well I hope this helps those who like me was clueless - I might still be clueless but I'm now running WinMob 6.5!
Oh I should also point out that the requirement for SPL 4.XXX still applies (see first post for how to work this out) and I have no affliliation with wingster - just greatful!!

Flashing custom ROMs without first being HardSPL is not advisable or safe for your device. Certain ROMs do not require it, but it is highly recommended as it virtually brick-proofs your phone, and it is fully reversible if you ever need to go back to shipped condition.
Also, this is not posted in the correct forum. This is the Herald Mobile 6 forum, not 6.5, and should be posted in the Herald forum.

They're right!
They're right; the Wingster website is fantastic and I've downloaded just about everything that is on the site and backed it up on a partition. Just do exactly what these instructions tell you to do and once your phone is HardSPL; it literally takes an act of God to brick your phone.

Related

Spicing up my AT&T Tilt

I am waiting until the end of the summer to do some phone shopping but in the mean time I want to "spice" up my Tilt.
I am pretty inexperienced to doing anything to my phone but I want to do a full overhaul. Clean everything out and make it as smooth as possible before re downloading some programs(Skyfire, Palringo, Opera Mini, etc)
Any suggestions on what to do? Also is there any way to make Windows Mobile more finger friendly(still running whatever came with the phone, with the exception of running HTC Home)
Thanks in advance.
Jebus Chrit said:
I am waiting until the end of the summer to do some phone shopping but in the mean time I want to "spice" up my Tilt.
I am pretty inexperienced to doing anything to my phone but I want to do a full overhaul. Clean everything out and make it as smooth as possible before re downloading some programs(Skyfire, Palringo, Opera Mini, etc)
Any suggestions on what to do? Also is there any way to make Windows Mobile more finger friendly(still running whatever came with the phone, with the exception of running HTC Home)
Thanks in advance.
Click to expand...
Click to collapse
Check out the rom forum. I think you will be impressed. Read through all the posts first. ( I know alot of reading but it is worth it)
I've looks and it's pretty confusing. There seem to be so many choices and a lot keep running into things that work but sometimes everything isn't 100%
Would you recommend a specific ROM and that leaves all the phones capabilities/hardware intact?
They all pretty much do.
Jebus Chrit said:
I've looks and it's pretty confusing. There seem to be so many choices and a lot keep running into things that work but sometimes everything isn't 100%
Would you recommend a specific ROM and that leaves all the phones capabilities/hardware intact?
Click to expand...
Click to collapse
It can be pretty confusing! And it can be very intimidating! If you're still running a stock ROM (never flashed anything before) go ahead and read the thread about flashing your first ROM. It contains just about everything you need to know! Read it a couple of times, really.
As for what ROM is best, personally, I like TPC's ROM. Try it out, if you want something different, go with something different.
Just remember a few things:
Follow the first link I gave you. Follow the instructions, step by step! Even if you think taking out the batter doesn't make a difference, do it anyway! Follow the instructions to the letter and you'll be fine.
Once you get it unlocked, flash a stock HTC ROM. Go to HTC.com, support, select AT&T Tilt, download the ROM upgrade, and run it.
From there, if you're going to flash TPC's Elite 3.1Full (second link I gave you), update your SPL. Follow the instructions in the first thread on updating the SPL, and go with 3.29 (if you choose a different ROM, read the thread to find the recommended SPL). One you have the right SPL, flash the ROM. If you have problems with your sound or camera, flash a new radio.
I know it can seem a bit much. But just read everything a few times, and follow all the instructions carefully. These phones are damn near indestructible, so even if some **** goes wrong, the guys here can help you fix it.
SoberGuy posted some very good advice. The instructions he posted are easy to follow and very detailed. As far as the TPC rom, I use on of his roms also. I've only flashed one rom and I'm very happy with the rom that I'm running. Once you get a new rom its like having a new phone all over again.
wheelierider said:
SoberGuy posted some very good advice. The instructions he posted are easy to follow and very detailed. As far as the TPC rom, I use on of his roms also. I've only flashed one rom and I'm very happy with the rom that I'm running. Once you get a new rom its like having a new phone all over again.
Click to expand...
Click to collapse
You can say that again! I've been dying to upgrade, but trying to hold out for the TP2. I ran Leo's ROM for the longest time. After flashing to TPC's ROM, it's like a brand new phone again! Now I don't worry about having to wait for the TP2, my Kaiser is like a new toy!

Help The Noobs

Will someone be kind enough for all the noobs out there and post a complete video of how to get from a completely stock firmware to (well in this case) this hero build, or the newest, latest, or best working hero build. While showing the order to flash radios, spls, and such using the ADB. It will help out a lot of people trust me. And from the looks of all the noobs right now youll have so many views, subscribers, followers or whatever your motive is. Please help noobs out.
If you need it you can find some free desktop recorders to enhance your video here: http://download.cnet.com/windows/vid...ftware/?tag=bc
Completey safe downloads from cnet.
Remember stock to hero!
I would do this myself but i myself do not know how and am on my second g1.
Thank you!
i will have a go at making that over the weekend.
milestone.it said:
i will have a go at making that over the weekend.
Click to expand...
Click to collapse
Thanks a billion. You dont know how much this will help people. Post a link here when your finished please
Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??
OutstandingO said:
Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??
Click to expand...
Click to collapse
Honestly idk but maybe someone will see this thread and answer that for you or you can start a new thread
There are quite a few videos out there already that show you how its done. Maybe not directly toHero but the whole process is the same - http://www.youtube.com/watch?v=DDPFhJ9noLA
So instead of using JF 1.31, simply use the Hero ROM of your choice, rename it as "update.zip" and put it on the root of your SD card. Turn off your G1, hold the HOME button and press POWER to get into the Recovery image. Press ALT+W (to wipe) then ALT+S (to flash the ROM).
EDIT: I forgot some very crucial information >_< IF you are going to Hero from Stock you do require a few other things. Namely the new Radio and the new SPL (depending on which Hero ROM you pick). Make sure though that whatever you do, you upgrade the radio first to avoid bricking your G1. Look at my signature for links to what you need, like the Radio, SPL etc.
Wait patiently and all should be well...
@OutstandingO
Hero is basically Cupcake (1.5) but with a different interface created by HTC using custom code. So you just flash the Hero ROM of choice and that's it.
root video
OutstandingO said:
Since this thread is for the "noobs", I have a couple of questions to ask.
Excuse my not using the search fully. There are just so many threads and so many responses and none of them are completely clear.
If I were to root my phone with the latest Hero ROM that has flash playet 10, will I still need to upgrade the firmware to 1.5 or is this particular ROM built on 1.5 or what??
Also, does this latest Hero ROM have the famed HTC virtual keyboard or no??
Click to expand...
Click to collapse
YouTube has plenty of view on rooting that's where I learned how to do it, they also have the files u need to root it right there for u to download. Just search it and u will find it. The guy who's vid I followed is tony moreno look for his bids. I don't recommend jumping from 1.1 to hero. Go from 1.0 to 1.1 then jump to 1.5. Also hero is built from 1.5. I myself have tried it but even with all the optimizing its not fast enough for me. It also has the famed HTC IME keyboard. I myself use JF 1.5 APD. With the Hero theme in the themes section with the HTC keyboard. Flash would be nice but it still has issues with speed and force closings. Like I said YouTube the rooting process and search around the thread for other stuff like and and how to use fastboot.
I forgot some crucial information, namely to upgrade the Radio first and that you might need to upgrade the SPL. Have edited my post.
That is in part something that threw me for a loop.
I've seen multiple vids for rooting but none of them seem to address this whole "Radio" issue that you brought up and the steps surrounding that. From what I have been reading this is the most important part.
I love this site but the type of people that post here are guys that already know what their doing in most cases and they speak and post as such.
So have I ever developed an app for the G1, no, but I'm not Danny Dunderhead either. I can read a set of instructions if laid out for me.
So I ask you more experienced gentlemen, can someone either post a link or give me step by step help in checking my "radio", upgrading my "radio" and then installing the ROM??
I would greatly appreciate it.
I did it! I bricked my G1!
Yeah, well...what can you do. I read over the posts here, watched youtube videos, and searched the web as well. Read and viewed everything I could until I couldn't take it anymore. Then...I tried. Tried and failed? No, tried and died.
MAN, I WANT HERO! I am more jealous with every video I see. I don't care if it's a little slow. It is pure Android beauty. But...
There is so much information out there, not just at this forum, but all over the net. And although there are many similarities between the instructions (I use that term loosely for some), many have different steps so it's hard to tell which to follow. Apparently taking what you feel are the best from each is not the way to go. Really, I'm not stupid about these things...well...
So, here is where I started; a T-Mobile G1 running the latest OTA 1.5 update and the 2.22.19.26I radio software. Used Parted Magic to create a 5GB FAT32 and a 1GB EXT2 partition on the SD card. I downloaded everything I though I would need or could find. The original boot and recovery img's along with RC29, RC30, and Cupcake zips. Then I got HardSPL and a bunch of files from Hayruko. I got JeseusFreke, CyanogenMod, and JACHero stuff. Hell, someone said to download the Telnet.apk and put it on the SD card as well. Did that. I found a great thread for installing the JACHero, but it did not go into rooting your phone first. Did that need to be done? I guessed it did. So I started there. Downgraded nicely to RC29. That was easy. Then even went through the telnet and terminal emulator steps. Then trouble. Which recovery.img to use? Some instructions reference the testkeys and some don't when rooting. Figured I would do it that way. So I went through those steps. Loaded CyanogenMods 1.3.1 and 1.33.2005 SPL on the SD card. Flashed (I thought) the recovery.img. Rebooted to get ready to install the SPL. Stuck at t-Mobile G1 now! They really do call it a brick for a reason.
So now that I got that off my chest, a few questions. First, I want to run HERO. I want it! However, I would like to make a request this time. Could someone please post step by step instructions for taking a stock G1 to the JACHero 2.3.4 release. Not just "flash the recovery and SPL" files. I would like more detailed directions. If you know of a good link to send me, please tell me. I thank you in advance for your time. I know it's a real pain in the ---, but I promise I will pass your knowledge along to another such as I!
A few questions first. I believe the steps are something like this:
1. Downgrade to RC29.
2. Copy recovery_teskeys.img and some recovery.img along with some SPL update.zip file to the SD card and "load" them properly. Which files should you use (does it matter), which order should you do it and how?
3. How do I do a Nandroid backup at this point? Do I need/want to?
4. Do I wipe now? Need to ever? Doesn't the image overwrite everything anyway?
4. Copy update.zip (the renamed JACHero 2.3.4 zip file) to the SD card and load it. Do you need to load any other image first other than JACHero 2.3.4.?
5. Enjoy HTC Hero goodness!
I know I am asking a lot, but I need the steps so I can replicate this easily. I am going to want to do this a lot based on what I see out there. Always something new to try and a lot of great developers out there. Thank you in advance for all of your time and effort. I promise to pass it along.

a little nervous to rrot

First of all I'd like to apologize because I'm sure this has been covered already but I just feel more comfortable asking myself.
I have had my g1 for a couple of months now and I'm starting to get all itchy for root for all the obvious reasons. I hoping someone can answer some questions or point me in the right direction.
I have ota CRB43 build on my phone. I see LOTS of different instructions for rooting.. I'm wondering what one I should go by. I also notice some people say to take out the SD card instead of mounting to prevent possibly bricking your phone... should I do that or is it better to mount with the usb? And after following whatever instructions is there anything else necessary to do?
I was also interested in what themes people are using. Can I jump right into that after rooting or is there something else I will need to do. Any links for themes you are using would be great also.
Thanks so much… I really appreciate it.. Thought I had more questions.. If I remember anything else I’ll update.
I used Gizmodo's guide - very simple and clear.
http://gizmodo.com/5146797/how-to-hack-android-for-multitouch-web-browsing-on-the-t+mobile-g1
If you follow it step-by-step you'll wind up with an old build, but you'll have root and be ready to step up to any new build. New builds are easy once you've rooted - rename to update.zip and flash using recovery (explained in the guide above).
You'll also want to get the newest radio (after rooting per directions above) - Download the ota-radio-2_22_19_26I.zip file from http://www.htc.com/www/support/android/adp.html#s3 -- Rename to update.zip and flash as usual.
And I had absolutely no problems mounting the SD Card via the phone itself. Just make sure you cleanly eject the card from your PC every time, to avoid corruption.
And let me suggest CyanogenMod for your build.. Simply the fastest and most stable Android build out there - "official" firmware included.
Thanks a lot for your response! It was helpful and I checked out your link.. I was looking at -
http://androidsocialmedia.com/root-access/android-g1-root-access-why-how
originally, but I think they look similar. Thanks for the radio info as well.. anything else besides that I'll need to update?
let me ask one more thing- what's the difference between CyanogenMod and the others available?
thanks again for your help!
sole3s said:
Thanks for the radio info as well.. anything else besides that I'll need to update?
Click to expand...
Click to collapse
Well, I did skip the SPL - Some ROMS require a different SPL (Secondary Program Loader/Launcher, I think..) to free up additional space on the device. Mostly the Hero based ROMs. I haven't touched any of those, need someone else to help there.
sole3s said:
let me ask one more thing- what's the difference between CyanogenMod and the others available?
Click to expand...
Click to collapse
Cyanogen is tweaking the heck out of Android - endlessly enhancing it for performance and stability. Cyanogen has a few visual tweaks but mostly it looks like stock Android with all the improvements under the hood.
The other builds.. Mostly visual, in my opinion. They all have fans though, check out the threads under Development for more details. Also, the Android ROM Database - http://www.simonwalkerphotos.com/android/android_build_information.asp
Dude, thanks so much for all this info.. http://www.simonwalkerphotos.com/and...nformation.asp was really helpful.
last question I'm gonna ask.. if i hard reset do is it going to unroot my phone?
Again.. you were really helpful! I appreciate it so much!
Nope it will not unroot you're phone
No, you'll just go back to a fresh version of whatever ROM you have installed. However, some ROMs (Like Cyanogen) put some apps in the /data folder, so a wipe could break the ROM. Typically it is better to flash after a wipe. But you won't loose root either way.
Only way I know how to loose root is to flash a none rooted ROM.
The only thing I would do is avoid the DangerSPL until you either need it or know what you are doing. Otherwise its pretty much hard to brick your phone unless your trying to with a low battery.
I'd just like to take a second to thank everyone for their help, especially Saiboogu. Like I said in the first post, I'm sure this stuff was covered somewhere but this really made me feel a bit more confident. Thanks for not flaming me... I'm actually a bit surprised at the friendly responses... again thanks everyone.
Most likely I'll be able to get around to rooting on monday or tuesday.. I'll post updates just for the fun of it.
Take it easy guys
Lol well you posted it in the right section. Of course you are going to get help
What alritewhadeva said .. You ask in the right place, we'll help. You're off to a good start.

FOR NEW CAPTIVATE USERS - READ HERE FIRST - FAQs | HELPFUL LINKS

Strange we have many FAQ's WIKI's, Great topics on <x> subject - but not one place for the suffering new user to go to. After even myself duplicating topics that have been posted multiple times it is my hope to create this topic to help guide the newly wayward Captivate user to the correct topic and keep the repeated topics down a bit.
I AM IN NO WAY RESPONSIBLE IF SOMETHING HAPPENS TO YOUR DEVICE - YOU THE OWNER OF YOUR CAPTIVATE TAKE 100% RESPONSIBILITY.
This is going to be a long long post - so make sure you use your CTRL-F in your Browser
Special Credits go to the following for putting together the information. I'm just the one gathering it up. So if something you read here helps - make sure to DONATE to them. Also if I have forgot to list you and you wish to be credited? PM me and I'll be happy to add you.
Mikey1022
CLShortFuse
Design Gears
bobbylx
nbs11
BEFORE EVEN READING THIS POST IT WOULD BE WISE TO READ THE WIKI FIRST!
Also some tips before Posting your Question!
Use the SEARCH FEATURE on the Forum and keep your search simple. (ex. GPS, Bricked, Shutdown etc..) Odds are your issue has been posted and answered a few times.
Follow the Rules: Failure to do so could get you banned or worse ridiculed!
Be Courteous and Patient! - If your posted is filled with expletives and I hate this phone, and you come off as being overall rude? Don't expect an answer and expect your post to get removed and you possibly banned.
1) What USB Drivers should I get for my computer to recognize my Captivate? These are the drivers I have used on both a Windows XP 32-bit and Windows 7 64-bit machines - so I know they work.
For Windows 64bit Click here.
For Windows 32-bit Click here.
2) How do I Root my Captivate?
By far the easiest method that I've been able to use is CLShortFuse's One-Click Root and Allow Non-Market Apps. It is a VERY SIMPLE application to use.: Click HERE to go to the post to read about it and download the application.
There is a new tool out there that is a "do-it-all-in-one" called AIO - I would check out the post here and check out the youtube video. This tool appears to do it all.
And users have asked what do I lose if I root my phone. The short answer is nothing! You will not lose any settings, pictures, media, application data etc. But you do gain a lot! I would suggest reading about rooting your device here to learn more about the benefits to rooting your phone.
3) Oh crap I have "bricked" my device!
Um no you didn't. Unless you are unable to get the phone to power on, or it will not be recognized by your computer it is not bricked. "Most" (as in 99.99999%) of the time you can get the phone back into download mode and then ODIN 1-Click back to stock. I would highly recommend going to the links posted before reading the methods I have below them.
Go to DesignGears Odin3 One-Click back to Stock thread and do what it says there.
You should also go to bobbylx's READ ME BEFORE FLASHING!!!! Thread as well by clicking here.
If your phone is still able to get to CWM You can download the stock OTA JH7 from this thread here! I would still recommend the Odin 1-Click method as it will definitely wipe all the gremlins from your phone.
You can watch this tutorial on youtube here if you wish. Credit to BlinkPhaseVideos for the tutorial.
If for some strange reason you absolutely cannot get the phone into download mode you can try one of two things:
The first method - It will take a few tries to get the timing just right so be patient:
Unplug your Device
Pull out the SIM, External SD Card, and Battery
Plug in the mini-USB Cable back into your phone.
While holding down BOTH Up/Down Volume Buttons re-insert the battery.
If you get the "grey battery charging" screen. Then you will need to try and re-attempt it as it didn't work. You should get the download screen and be ready to go back to stock.
Build a Jig to force the phone to go into download mode by reading this thread here.
Mind you this is not for the feint at heart and AT&T warranty centers might be a better option then completely frying your phone.
4) My Phone is Randomly Rebooting or Shutting down after I do <insert whatever action it was doing when it did it here.>
I was informed of two separate posts here and here and now here.
If you have a build 1008 phone and the IMEI # matches what is in this thread here then you might get a replacement device.
Feel free to try what they are posting on there and who knows? You might get lucky. But the overall consensus from what I've read is that if your phone is shutting down and it's not related to some errant application, a custom ROM, or you dipped it in water then it is hardware related and you will want to do a warranty replacement. (No warranty - OUCH! That $4.99 a mo seems pretty trivial now eh?)
5) My GPS is not working because of <insert your random thought/idea here>?
There are two awesome posts on the developer forums on thought, ideas, potential fixes that will at least help if not completely fix your GPS. Keep in mind a lot of this is speculation, personal user experiences, and some folks just madly mashing buttons and getting lucky and having no clue as to how they fixed it.
If your not having GPS issues GREAT! You don't need this then!
My personal favorite thread as it has a lot of information about how GPS works is the [GPS/AGPS] REAL solution analysis thread (Jupiter Tweaks) thread. ***Note: This is most likely only for Froyo 2.2 ROM's.
Another one that has a lot of information and might possibly work for your is:
GPS Flawless/I am requesting XDA Community and Developers to please read!!
6) So.. You think your ready to Install that Awesome <insert Name of ROM here> ROM that will CHANGE YOUR LIFE?
Uh-uh... not until you have read here first. This is that sticky topic that says "Read BEFORE flashing!!". This is probably THE MOST IMPORTANT reading you can do before you start flashing as it shows you how to backup and restore your device.
Then you need to read up on nbs11's guide on his [GUIDE] How to Install a Custom ROM by going here. This guide is VERY easy to read and can apply to most of the custom ROMs that utilize a *.zip to install. ***edit - now includes a video(s) on youtube on how to install that custom ROM.
And failing to follow the developer/cooker's instructions to the "T" could cause catastrophic issues with your phone and yes... possibly bricking your device. Make sure when you go to the ROM you wish to install that you read their install instructions as it could slightly differ from other ROMs out there.
7) So your Battery is Going Down to 0% faster than your USB can Charge Your Phone?
This - by far is probably the best thread I have read about the subject. Although some of it might be speculation - it does seem to be pretty solid work. I would suggest reading this post:How to isolate and fix battery drain (and maybe lag, too) and then see if your battery performance improves.
I hope this guide helps you out. I wish I had known this information before I started flashing ROMs.
Important Links with Additional Information about your Captivate
I have found all of these quite helpful. If you think your post should be added please PM me!
Wiki's and How-TO Basics!
The XDA Samsung Captivate Wiki
XDA and Android Terms and Acronyms Thanks to jmtheiss for creating this. Basic guide to XDA and your Captivate
AIO Captivate Toolbox: This is the all in one tool that allows you to do everything from install drivers, root your phone, and install custom ROM's. If your new this might be the tool for you to use.
Samsung HOW-TO Wiki (3rd Party Link)
The Main XDA Wiki: Lists all the phones that XDA has in their forums. Also has additional information there.
ADB for Dummies! - ADB is probably one of my best tools for tweaking my phone (and restoring stuff I break). If your going to be changing your phone around at all - READ THIS THREAD
Theming Your Phone
Captivate Theme Sticky: Go here to see all of the different themes/tweaks/mods for your Captivate phone.
MetaMorph Home Page on XDA - This is a 3rd party application that will modify the look of your phone without you having to modify any type of *.apk files yourself.
Circle Battery Mods - How to change your default Battery Icon on your status bar.
Transparent Widgets - Just what it says. But please be careful and understand what you are doing before attempting these mods.
Common Sense Before Posting Your Question - PLEASE PLEASE PLEASE READ
Before you post a question on XDA - Please make sure you have utilized the SEARCH Feature - as your issue has probably been answered at least once.
If your going to post a question, make sure it makes sense! i.e. a bad example is ZOMFGBBQSAUCE WTF DO I DO!!!1111!!!!111!!!!!! vs. Phone is Soft Bricked After Attempting to Odin 1 Click. Which one do you think people are going to know how to answer by looking at the topic? Just saying..
In the body of your text it will be very helpful if you do the following:
State clearly the issue - bricked my phone etc.
What ROM are you currently using?
What is the EXACT ERROR of the issue you are reporting?
Is your phone rooted?
Did you have USB Debugging turned on?
If you fail to put pertinent information such as the above - there is no way for anyone to answer your question.
And.. this shouldn't need to be said but I'm adding it anyways...
Be patient. Be polite. Just because you cannot understand something does not mean u can show your frustration at folks here.
Of course this does not encompass all questions - mainly this is useful for when something goes wrong with your phone.
Good resource to put everything together.
w00t Sitckied! Thanks!
JF6 to JF7 Kies Mini Update. Is it necessarily?
Question guys. After using Odin to obtain JF6, do I need to use Kies mini to get to JF7 to be able to use another ROM or I can just master clear everything and from JF6 install a new ROM? Asking because I bricked my phone trying to do OTA to JF7. Got a replacement phone. The boot loader is shot probably so its safe to say my Captivate is bricked. It won't power on at all. I think upgrading to JF7 is pointless but need your expert advice. Thanks.
I have never upgraded from jf6 to jf7 before I flashed another rom, never had any issues. Think it would be an unnecessary step if you are planning to flash over out anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App
Mr.Pirate said:
Question guys. After using Odin to obtain JF6, do I need to use Kies mini to get to JF7 to be able to use another ROM or I can just master clear everything and from JF6 install a new ROM? Asking because I bricked my phone trying to do OTA to JF7. Got a replacement phone. The boot loader is shot probably so its safe to say my Captivate is bricked. It won't power on at all. I think upgrading to JF7 is pointless but need your expert advice. Thanks.
Click to expand...
Click to collapse
After you use ODIN back to JF6 - you can then upgrade back up to any ROM the Dev Forums have available.
The only caveat to this - is READ THEIR INSTRUCTIONS! Some are highly experimental and require you to install them different from the standard CWM install method. (i.e. Cyanogen and the Gingerbread port going around).
i wish this thread was around when i first started out a while back. good job on this one guys.
Can someone post something that shows how to install a theme? I have flashed a custom rom and see a theme I wanna install on it. (Already downloaded the .zip file for it, not sure what to do next)
Thanks.
nice stuff
I find that installing PDAnet as my drivers for my Captivate works well for rooting.
Nice thread. I wish I had seen this before I started flashing.
I think the OP needs to be updated with the line "Be patient. Be polite. Just because u cannot understand something does not mean u can show ur frustration at folks here."
A couple of questions. I've rooted my phone installed a custom rom (serendipity 5.5) and installed that steam. What does jpy and all those others mean? and where would I find out what mine is?
Deadclown said:
A couple of questions. I've rooted my phone installed a custom rom (serendipity 5.5) and installed that steam. What does jpy and all those others mean? and where would I find out what mine is?
Click to expand...
Click to collapse
I think all of that is listed in the WIKI with definitions.
When you see JPY - it is the last 3 letters of the Baseband Version typically - but could be the Modem or Kernel being utilized in the ROM your running. You can see what baseband you are currently running by going under Settings -> About Phone and you will see under Baseband Settings something like: "I9000UGJK4"
But... you would be better off going to the Dev's forum and looking at their release notes. 99% of the time tell you what build the kernel is based off of and the modem they are using.
LOL and yes being patient and courteous is kind of a given. If you guys have any updates, ideas, etc.... to add to the post please let me know.
diablo009 said:
I think the OP needs to be updated with the line "Be patient. Be polite. Just because u cannot understand something does not mean u can show ur frustration at folks here."
Click to expand...
Click to collapse
lol Added it!
Thanks This is helpful
thanks for posting this.
How do you upgrade a ROM?
I just flashed Super Nova 2.0.2 last night. It was updated to 2.0.6 since I flashed. How do I update? Do I have flash back to factory?

Why Complexities

First off, Thank you to all the dev's who've put out all the great roms (too many to mention)....
But, as I was reading through some of the most recent releases of roms, I found myself more and more frustrated with confusion. It wasn't the screenshots (thanks, it helps), it wasn't the list of changes/additions/subtractions (that really helps), it was more the complex install info.
I'm not trying to hurt anyone's feelings, but why would you go off on a tangent to left field while your writing down how to install something? Can we get a universal install procedure?
Most roms are released within hours and in some cases days of one another. Lets assume that rom a has what newest rom b needs and create something from that. Then if you need to express random thought for the new guy, that could be post #2. I guarentee that most of the people here have flashed and re-flashed and soft bricked and flashed again.
Guess what I'm trying to say is, rom dev's are releasing things that probably no one will use cause they aren't clear and concise on the install procedure.
FroztIkon said:
First off, Thank you to all the dev's who've put out all the great roms (too many to mention)....
But, as I was reading through some of the most recent releases of roms, I found myself more and more frustrated with confusion. It wasn't the screenshots (thanks, it helps), it wasn't the list of changes/additions/subtractions (that really helps), it was more the complex install info.
I'm not trying to hurt anyone's feelings, but why would you go off on a tangent to left field while your writing down how to install something? Can we get a universal install procedure?
Most roms are released within hours and in some cases days of one another. Lets assume that rom a has what newest rom b needs and create something from that. Then if you need to express random thought for the new guy, that could be post #2. I guarentee that most of the people here have flashed and re-flashed and soft bricked and flashed again.
Guess what I'm trying to say is, rom dev's are releasing things that probably no one will use cause they aren't clear and concise on the install procedure.
Click to expand...
Click to collapse
I see your on super nova. Have you looked at Mosaic. I tried to make the directions as simple as i could
right now with the recent port of the i9000 2.3.3 things have changed.
and changed very recently.
soon enough there will be an easier, more standard way to upgrade.
but keep this in mind....
what we are doing here is programming a phone. the devs AND YOU!
programming an electronic device is not a simple thing, and is not childs play.
the devs have YEARS of experience in programming to bring us the software,
we need to understand what we are doing in order to do it.
so we need to understand programming.
this cannot be done in 10 minutes by just reading instructions.
and this SHOULD NOT be able to be done in 10 minutes by reading instructions.
there are real risks in doing this, that is why it voids your warranty.
you need to understand what you are doing to be able to do it.
thats why you must LEARN in order to do this.
nobody ever learns with brain-dead instructions.
the more you LEARN first, before flashing, the better your chances at success.
the easier the instructions the easier noobs run into problems! Brick their device or get scared and confused about very simple things that they should have understood first!
so the complexity has a dual purpose, it forces you to go out and LEARN before you do anything AND also provides you with alot of information to start learning
<<Captivate Post of the Week>>
TRusselo said:
right now with the recent port of the i9000 2.3.3 things have changed.
and changed very recently.
soon enough there will be an easier, more standard way to upgrade.
but keep this in mind....
what we are doing here is programming a phone. the devs AND YOU!
programming an electronic device is not a simple thing, and is not childs play.
the devs have YEARS of experience in programming to bring us the software,
we need to understand what we are doing in order to do it.
so we need to understand programming.
this cannot be done in 10 minutes by just reading instructions.
and this SHOULD NOT be able to be done in 10 minutes by reading instructions.
there are real risks in doing this, that is why it voids your warranty.
you need to understand what you are doing to be able to do it.
thats why you must LEARN in order to do this.
nobody ever learns with brain-dead instructions.
the more you LEARN first, before flashing, the better your chances at success.
the easier the instructions the easier noobs run into problems! Brick their device or get scared and confused about very simple things that they should have understood first!
so the complexity has a dual purpose, it forces you to go out and LEARN before you do anything AND also provides you with alot of information to start learning
<<Captivate Post of the Week>>
Click to expand...
Click to collapse
Nice long post. Although alot of rambling Tru but I like your last line
As for a standard set of installation instructions, I dont think we will ever see it. Each rom is as unique as the person that developed it, and with that individuality comes an individual requirement for implementation.
ATM some ginger roms are wipes, some arent, this used to be true for all froyo/eclair roms.
that is why we USED TO have to flash to stock each time. same now. (for non wipe roms)
that changed! it can again!
as for getting the bootloaders, if you are installing a WIPE rom you dont need to flash the whole i9000 package. Just the bootloaders alone and ONLY ONCE. some roms currently use this method.
other roms that arent wipe roms depend on apps and framework to be there, or might not like other stuff left over that may still be there. so it is necessary to flash back to i9000 stock, this can be done with or without bootloaders if you already have them. but most of the non bootloaders packages have been taken down. once again you only need to get the bootloaders once.
once again all this can change and standardize again. with the following intructions:
from eclair or froyo
1. odin flash GB bootloader and CMW3 kernel in a single package. (small 4 MB package!)
2. boot into CWM3 and flash a WIPE ROM.
done and upgraded.
my fastest upgrade was one extra step. the bootloader package had re-orient kernel with no cwm3 so i had to reboot and odin flash talon between step 1 and 2.
still pretty easy with a wipe rom.
we grow up so quickly...

Categories

Resources