How to install Touch Flo 3d from Touch Pro II - Touch Pro, Fuze Themes and Apps

I saw this post about installing the *NEW* Touch Flo 3D from the Touch Pro II onto a pocket PC (link below). Has anyone trid this on a AT&T Fuze (Touch Pro), does it work cleanly? Any problems?
http://pocketpc-live.com/pocket-pc/how-to-install-touch-flo-3d-from-touch-pro-ii.html
Thanks

yes it runs clean(suggest XBMOD TF3D 2.1) if u want just the touchflo, but for me though after flashing EnergyROM with 2.1 Manila TF3D which is VERY similar to the ones on TP2 and Diamond2 it ran soo much better, just expect that manila wont auto rotate, you have to configure it yourself using a change screen software....

http://forum.xda-developers.com/showthread.php?t=542113
Read through the first page.. Thats the newest release V2.1.5
It also explains how to get it to auto rotate.
The cab file for 2.1.5 should be out any day now. 2.1 is released already though. But just wait for the newest one is what I would recommend

Related

XBmod Manila HD on the Touch Pro

OK, here's the thing.
I'm sure most of you have stumbled upon the XBmod Manila HD port for the Diamond: http://forum.xda-developers.com/showthread.php?t=470164
If not, take a look.
Anyhow, I'm using an unbranded HTC Touch Pro with a stock ROM. The installation goes through nicely, and asks for a reboot.
After it reboots, the loading icon shows up for a minute, and then I'm getting an error regarding the Loader.exe. If I press details, it says that some files are missing, but does not mention which files.
My question is: has anyone successfully installed and is using the Manilla HD on a stock ROM Touch Pro?
Any ideas on what may be the difference between the Diamond and Touch Pro that could cause this issue?
Thanks!
the only problem is when you flip to landscape, it still tries to display portrait. this ca n be fixed by opening the program you want in portrait, then slide out keyboard, it will flip to landscape. then when you're done, flip back and exit. if you've got some patience, herg is working on hd manila specifically for tpro. can be found here:
http://forum.xda-developers.com/showpost.php?p=3169896&postcount=825
vader165 said:
if you've got some patience, herg is working on hd manila specifically for tpro. can be found here:
http://forum.xda-developers.com/showpost.php?p=3169896&postcount=825
Click to expand...
Click to collapse
That's good to know! I can wait... the version will probably work better with th TP anyhow.
Thanks for the info!
Spec's
Sprint Touch Pro Jigga's ROM...
HD Manila runs just fine, even installed the extra tab cab XBmod had going...so now got's me 15 tab HD.
Stocks are nice, and he's stretched the weather out a bit...
I did miss Jigga's cooked in Zoom In / Zoom Out Text, so I re-installed that from the customizing TF3D thread, and can report that this does work on HD...
Good Stuff!
I never installed the loader or anything, just make sure your on-screen keyboard is open when you are about to hit ok to activate TF3D as your today screen plugin. Pop's up in about 5-seconds...
l8r
chAz15 said:
Spec's
Sprint Touch Pro Jigga's ROM...
HD Manila runs just fine, even installed the extra tab cab XBmod had going...so now got's me 15 tab HD.
Stocks are nice, and he's stretched the weather out a bit...
I did miss Jigga's cooked in Zoom In / Zoom Out Text, so I re-installed that from the customizing TF3D thread, and can report that this does work on HD...
Good Stuff!
I never installed the loader or anything, just make sure your on-screen keyboard is open when you are about to hit ok to activate TF3D as your today screen plugin. Pop's up in about 5-seconds...
l8r
Click to expand...
Click to collapse
Hi can you post the cab from Jigga, please?
Thx in advance
Why not just run the new TF3D2 on your phone instead...
http://forum.xda-developers.com/showthread.php?t=493531

Is there a Touch Pro section??

I'm trying to find a useable TouchFlo3D as well as ROMs to use. I'm using the factory Verizon WM6.1 with GPS hacked. Everything works fine with this rom except for the TouchFlo app. Changing Themes and such within the TF3D app just doesn't work. I'm assuming because my phone is a Touch Pro and not a Diamond?
try the raphael section..http://forum.xda-developers.com/forumdisplay.php?f=438

Touchkeyboard problem

Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Come on... you can use the microsoft keyboared with your thumbs. I used to for a while on a smaller screen than the D2.
But anyway I have no real help just thought I'd throw that in because it was one of my selling points when selling my Elfin. Look how accurate this screen is. I can type faily accurate and quick on this tiny keyboard..... try that on an iphone. Oh and I have these 3 other keyboards you can use to....
Great stuff.
Touchkeyboard solution
shuflie said:
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Click to expand...
Click to collapse
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
I did the same thing when I had my Touch HD and it took me ages to figure out what the cause was.
why the hell did they remove the compact qwerty? I like the new full-qwerty, but I always found the compact version much better in this form factor for 1-handed use.

[Re-Opened] Touch Flo 3D And 2D QVGA- Apps and Updates

I started up this thread for any Kaiser user who uses, develops or does anything with Touch flo 3d Qvga (I Know there are other threads about these programs, this is to bring it into one place).
Posts on Applications, themes or anything for tf3d-qvga-3 and Touchflo 2d v 2.0 build 1919 is welcome!
Here is the kaiser D3D Driver.
If any Concerns Contact me at: [email protected]
I found a Standby App that shuts down TF3D when you power down:
Youtube App Also:
I thought Touch flo 3d doesn't work on Kaiser? Did someone get it working?
Dukenukemx said:
I thought Touch flo 3d doesn't work on Kaiser? Did someone get it working?
Click to expand...
Click to collapse
It works, it just doesn't work very well. TF3D needs the HTC-Class Action drivers, which are incompatible with all ROMS running the 101MB RAM hack. In addition, even if it does work on your ROM, a bug with the drivers prevents the device from entering standby while TF3D was enabled. A mortscript was made to disable it when the device was suspended or going to suspend, but it still took awhile and sometimes didn't work at all. Then, it would resume TF3D after waking the device, which also took awhile and intermittently worked.
There was a thread awhile back here, which put all the information in one place, so check it out if you're interested. But the way I see it, until fully working ATI Imageon/MSM7200 drivers are released for our devices, TF3D is unusable. If you want something that works well though, try the newest Manila 2d from the HTC Mega, which has the flipping clock and some of the looks of TF3D without the problems, and with this installed, it looks pretty similar.
Last nite i managed to experiment and install TF3D! on my htc tytn II, i used Unholy's Gaming Rom which doesnt have 101 ram and has D3D Drivers built in, i have to say for stuff thats experimental it does work quite well, its responsive and looks fantastic, it does take a bit to initialise once u come out of standby/sleep, but other than that i had a total ram usage of 50% used, 50% free which wasnt too bad, i think a fully working TF3D for our Kaisers is not too far away, as long as development continues, big up to da guys who have made this possible!
The problem seems to be that the drivers are in terrible shape. Doesn't work with roms using 101MB ram hack, and it won't allow the phone to go into standby.
How different is the MSM7200 vs MSM7201A? If devices using the MSM7201A chipset can run Touch Flo 3D just fine, then why can't we just take the drivers from those devices?
If someone has some experience with hacking drivers, I bet you can get those drivers working. I bet someone from Beyond3D could do it.
Some Screenshots Of Manila 2D:
hi bj... thx for the threads...it work just nice on my kaiser...but still have problems with bat power n backlight....seems it auto manage them when bat almost out...
nommy76 said:
hi bj... thx for the threads...it work just nice on my kaiser...but still have problems with bat power n backlight....seems it auto manage them when bat almost out...
Click to expand...
Click to collapse
Is This the standby program? if it is, the program doesnt like the backlight settings in. try turning them off. another way around this is to program one of the hardware keys to <none> then when the backlight turns off, push the button. it should turn the backlight back on.
it took me ages to find how to fix this problem. its painful but its worth it
Hope this Helps
Makes sense
here is a video of the new sense ui for htc touch 2.
http://www.youtube.com/watch?v=cDhnhrdYP0I
Background to all pages
Background for all tabs
I havent tested this yet...but here is the download
BG all pages
thx but after installed it, it doesn't work its ok i'll satisfied with my TF3D v3 now...the stand_by also work very well so now my bat last longer...hope i could post all the cab files n some images of my Kaiser...
TF3D on htc tyTn 11 Kaiser+S2U2+S2P
i take no credit just wanna share...
more images...
a few more images...
and the files...
still i'll take no credit for all these...really wanna share it...
take note these cabs/files are use on my kaiser and i don't know if it runs on others...used at your own risk...pls read the instructions first...cheers..
the files...
1. TF3D-QVGA_v3
2. NFSFAN Opera 9.5
3. htc audio manager by Swtos
4. htc Diamond album
5. TouchResponce v02_2
6. htc CA_Kaiser_Drivers
7. TouchPower & tf3dStandBy
8. M3D Lanscape
9. YoutubeQVGA
10. MortScript
11. Uzeb QVGA tf3d font patch (makes ur font a bit clearer)
12. No Curtains and Transparent bottom bar
13. Pamas Transparent Slider
14. MobileMatt CrystalClockWhite
15. S2U2-2.04QVGA
16. S2P-0.73betaQVGA
17. S2V-0.42QVGA (actually not working on my Kaiser, my bad to include this)
18. tPRO for S2P QVGA (theme that goes with TF3D)
Download the zip files at RapidShare from here..
and attached is standby in mortscript. (just extract all the files to your storage card)
...added fire charging phase; extract batteryg.png copy/paste and overwrites the png files to s2us folder in device/programfiles/S2U2
Screenshots!
Mate! love the screenshots it looks great! thanks for the links some there i didnt have.
re
doesn't work on my device..
One thing i know about Manilla... be it 2D or 3D... is that it's never the same instaling it, or having it cooked in a rom.
You'll never have the same stabillity... functionality even.
We could, of course, have a cook try and give us one very simple 6.1 rom with manilla3D cooked in.... it would be nice... just as a proof of concept.
Laurentius26...think that was is nick, once attempted it...
Now... that developments which i'm NOT aware now, like KaiserGL, VG and such...
stability...
i guess its how you choose the right files to flash and how you flash it because i did noticed different owner with same device, manilas and ROM but getting different results...
Hi.
Which Rom are using??
i'm using stock ROM 3.29

Clean RTM build?

hey guys,
is there a rom like the one from the touch pro2, with WM6.5 and HTC Sence that is stock like?
which build has the RTM?
i want that my touch hd runs as smooth as the touch pro 2 from a friend of me. its with original 6.5 firmware and the speed is really very impressive, like on the old XDAs with 320x240...
greetings,
apo
http://forum.xda-developers.com/showthread.php?t=578338
i've seen this release already, but this is manila, not sense.
touchflo was called manila till 2.1, since 2.5 its sense, isn't it?
i'll miss the programm shortcuts on the mail screen.
a few minutes ago i saw a post, where someone mentioned that WM 6.1 with sense 2.5 would be very performant like the touch pro 2. is anyone in here who could confirm that?
i want to flash a hd2 or touchpro2 stock rom :-D
sorry if i got you wrong; however, there actually IS a manila version called sense 2.1. it's the one with the weather displayed on the clock.
the touchpro2 stock rom has this version of htc sense (and kwbr released it for HD)
sense 2.5 (shortcuts on home) is meant for 1ghz cpu and thus it will never, ever, be as fast as in a HD2.
win6.1 + sense2.5 = no go as many features of sense 2.5 are heavily dependant on some wm6.5-specific updates
Yes, the Manila 2.1 version in the official Rhodium update is called HTC Sense. The closest to this Miri V30, Dutty R15, Dutty Holy Grail Man 2.1, and KBWR Topix 3.0.2
thank you guys, now i'am actually trying the topix 3.1.2...
runs very very fast and stable! thats like our mobiles have to work!
but i miss the weather and the program shortcuts on the main screen :-(
^Apo^ said:
thank you guys, now i'am actually trying the topix 3.1.2...
runs very very fast and stable! thats like our mobiles have to work!
but i miss the weather and the program shortcuts on the main screen :-(
Click to expand...
Click to collapse
yes, Im kinda in this situation as well.
while enjoying the speed of sense 2.1, missing the weather and river flow pic album. Wonder why they don't put the weather animations in the weather tab. If they can display fine in homepage, surely they can show ok in the weather tab.
jldiablo said:
yes, Im kinda in this situation as well.
while enjoying the speed of sense 2.1, missing the weather and river flow pic album. Wonder why they don't put the weather animations in the weather tab. If they can display fine in homepage, surely they can show ok in the weather tab.
Click to expand...
Click to collapse
why dont vw put a v12 engine in a polo if they can put in a veyron? lol short answer, if they made every manila the same no1 would have any reason to buy a new and more expensive device
I know this is a loong shot but can't manila or sense be modified ?? like we take out some cabs from a ROM and make a new ROM, can't similar thing be done with manila/sense? take out the tabs we like and put in a new manila!!

Categories

Resources