Hello
first an foremost i would say im an idiot. i tried to "Micro SD method" my spl back to stock...( i dont not know why i would do such a thing). Now i have stock spl... but no rom. if anyone could please help me i would be forever grateful. i have no clue why i would do something stupid like this. if anyone could please help thatd be great.
it says the following
RUUNBH
Kovs100
SPL-0.72.0000
Microp1-787
microp2- 707
Continue to Upgrade ROM
Please wait...
had the same problem, you still have a rom but your phone keeps hanging in the SPL Screen.
Please search fot mTTy i think i wrote a short instruction in the hard spl thread.
it was something with the : set 14 and set 16 command...
Got it fixed easily with this way...
regards
Try putting a stock rom as kovsimg.nbh on your ms and boot in the spl. Maybe it will recognise the update and flash for you
i tried doing the Micro SD, Official rom. and it all says its loading.
im trying to do this mtty thing but i cant seem to get it working.
meska i cant seem to get the same screen you got, if you could elaborate a little bit more.
so far i have mtty isntalled on windows xp...and a potentially bricked phone. any further steps, please?
Related
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
hello!
I am new here and i got one big problem.
So please help me!
I tried to flash my tytn II with this rom(ENDED- 28/V/2009 Anryl WM⑥.⑤ 21725 FINAL ULTIMATE(101RAM) -ENDED- ), but when i finished the flash, my phone want to boot. It stops on black screen and show "HTC"
If someon know how to fix it, please help me!!
R 1.27.16.21
G 22.52.88.13h
D 3.34.00.00
did you flash jumpspl and hardspl first?
Yes i did.
I did everything like it said in http://forum.xda-developers.com/showthread.php?t=433835 and my phone is stuck in bootloader. So how can i reflash it? i tried to flash it again with sd card but when i use power + camera + stilus to get bootloader, in a second there is a white screen where is written that there is no image, and it go back to three color screen mode, and in the bottom is a white screen where is written "serial"
When i try to flash it with activesync there is an error 262. I spend a lot of time reading many posts here, but i did not find enything what help me.
Any sugestions?
Thanks!
Bro, did you solve it? please let me know. Same issue and as described in the faq's tried using MTTY but that one also does not connect.
A few days ago I could not boot my X1 after flashing to a new rom. It came up with "Loading" and no image found. I was able to recover it with MTTY using a windows XP machine. I am now trying to flash to the newest version of CHristian's rom but I can't even hard SPL without getting stuck at the "loading page" again. I am able to pull the battery out and place it back in to boot back up to the OS. I also tried to do the SD card method and that didnt work.
I think something is wonky as last time I hard SPL'd it was a "success" but it just reloaded an old version of Christians Rom.
Please help. I have searched high and low on the forums and all i can find is people with the problem but no answers.
Thank you!
hey im nt no expert but have you tryied hard reseting the device to default settings, then formatting your memory card and then trying to port the rom across? i wonder if that would help!
confusedtadpole said:
hey im nt no expert but have you tryied hard reseting the device to default settings, then formatting your memory card and then trying to port the rom across? i wonder if that would help!
Click to expand...
Click to collapse
I did and it loads to Christians rom...
Please help...not sure if a moderator should move this to another thread or not
Shameless bump here. I still have not been able to resolve this. I can not seem to Hard SPL.
Answer:
I used the SSPL method from http://forum.xda-developers.com/showthread.php?t=431218 to finally get Hard SPL to work.
Hope this helps other people
Hi.
today i bricked my kaiser when i tried to install a dutty's rom
been trying to get this fixxed for over 5 hours. nothing worked out.
used kaisdiag.nbh from h ttp://forum.xda-developers.com/showthread.php?t=420683
in both suggested solutions my kaiser wont go further then the Loading page. ( waited atleast 10 mins twice without any success)
used some other RUU installs while in the tricolour screen:
ahmedfikry wm6.5 23549 Tilt UC light rom
KAISER_WM65_OS23547_PP12MB_Sonblack05
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
RUU_Kaiser_HTC_WWE_3.02.405.0_radio_sign_25.70.30.05_1.58.26.20
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2_ <== the one wich bricked my phone
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
RUU_Kaiser_TMO_UK_3.31.110.3_radio_sign_25.83.40.02_1.70.18.02_Ship
some other topic sugested to use MTTY.
but that probram says: usb port cannot open.
long story short: im desperate.
can any of u please help me fix my phone ?
its an MDA vario II. model Kais130 P/N 99hcy063-00
thanks in advance.
i'm no expert at recovering bricked phones...
but what i understand is that IF you have a hard SPL (which hard SPL do you have?), then you should be able to recover your device from nearly any situation.
try this...if RUU is not working well, try to flash using the SD card method.
also, try to flash a stock ROM (using RUU as well as using the SD card method). let us know what happens.
Try putting your phone into bootloader, ( press and hold power and camera buttons while doing a soft reset ) once it is in the " tri-color " screen, let us know what it says on the screen.
thanks for your time and the fast response, to both of you.
@#1
i used Pofs hard spl.
and as mentioned above i tried both the RUU way and with my micro SD card.
the SD way only shows me the 'Loading' screen. over and over.
and with the RUU i get several errors. connection errors at 0% and connection errors some later.
some roms just say they wont work on my phone.
and others just reboot my phone.
@#2
i think my phone gets to the bootloader all the time. cause i c no difference when resetting with camera and power button on.
its the tri color screen with the folowing information that shows up:
RUUNBH
Kais130
SPL-1.56.0000
CPLD-8
serial/USB
______________________
the serial shows up when the phone is not connected.. and the USB shows up when its attached to my pc with usb.
Any other suggestions ?
Thanks in advance .
You don't have hard-spl you still have a stock, flash the stock ROM of your carrier from bootloader.
Then follow the noobs guide to flashing.
Thx guys my phone is working like it used to be.
downoaded the original rom from t-mobile again. and again.
now got one wich is working.
thanks for your help.
i was about to throw the brick trough the window.
Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?