Database Develop

Help me with this camera thing...Tilt...

Ok i have done all the following steps from jocky forum guide and now i unlocked the CID whichever you call it. now i went thru all to test it out its still the same but i do see the word... inex which mean its already flashed anyways i press the camera buttons and the camera showns plain black screen and can i asked why? or its not done developing yet till i put in the cooking rom? i dont know how this work but to tell you that the camera is showing just plain black screen of course the album and others are there but when trying to take a picture its just plain black i even moved around toward the light and still black.... so any idea of helping me out here? and also is there a way to reset the tilt back to normal instead of doing the clear storage setting... please help and i would greatly appericated it.

Hard to understand what you're trying to say, but... If you flashed a custom ROM, you might not have the correct radio version for it. Each ROM will require certain radio versions to work properly, and the radio isn't always included with it so you need to read, find what radio version is needed, and flash it yourself.

Sounds like you have the wrong Radio.
Radio's need to be matched to the ROM you are running. Some of the unlockers flash special patch radio's. You need to re-flash a normal one.
Have a look at this thread and select a more appropriate one: http://forum.xda-developers.com/showthread.php?t=393182
Thanks
Dave

Screen Colors

Hy Guys,
I just hard spld my HTC Touch HD and all the colors of the screen look
oil smudged every time i boot up the device.
The htc logo , the wm6.1 screen have this problem
and after i refresh the screen (sleep button) it comes back to normal.
and everytime i reset the phone its the same thing until I refresh the screen
can anyone help me out ??
thank you
the attached image is a render of how horrible the screen looks.

Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again

from OliNex's post:
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
read more here

You flashed a 1.56+ ROM without having the 1.54 SPL! As suggested, use the Dummies Guide to flash HSPL. Or if you want to use USPL flash an official 1.56+ ROM first! (Then reflash this one.)
TronC said:
Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again
Click to expand...
Click to collapse

Common problem, posted countless times before. Try a little research before starting new thread. Any further problems, post in Dummies Guide thread
Thread closed

LAGGY

hey.....
i just flashed my Blackstone....and but a cooked ROM....
the problem is every ROM i but...i tried alot of 6.1 and 6.5 ROMS...
and it's doesn't work correctly...
when i start my phone the smart mobility text changes color to blue and the colors are mixed....
i have to turn the back light off then on to get normal colors...
and that's not the only problem....
it takes forever to start....and it's very laggy.....and sometimes i have to remove the battery to shut it down cuz it froze
what should i do...what did i do wrong....?

No biggie, you just need to get your rom version updated...follow Digital Outcast's guide and you should be fine...http://forum.xda-developers.com/showthread.php?t=505377

You have the incorrect SPL version. As Sean3 pointed out, read Digital Outcasts thread and decide whether you want to go the USPL or HSPL routes.

Once you follow guide indicated above your problems should be fixed. If not, post further queries in that thread
Ta
Rick
p.s. thread closed

Unable to install rom

Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?

i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.

jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.

RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.

Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.

Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.

If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along

RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed

Returning to Stock for repair! URGENT

Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody

To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?

I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong

I do but also need to make sure I do an original spl and radio as well

first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished

This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe

Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?

J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.

Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off

anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....

Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...

imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?

Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards

+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...

J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed