hey.....
i just flashed my Blackstone....and but a cooked ROM....
the problem is every ROM i but...i tried alot of 6.1 and 6.5 ROMS...
and it's doesn't work correctly...
when i start my phone the smart mobility text changes color to blue and the colors are mixed....
i have to turn the back light off then on to get normal colors...
and that's not the only problem....
it takes forever to start....and it's very laggy.....and sometimes i have to remove the battery to shut it down cuz it froze
what should i do...what did i do wrong....?
No biggie, you just need to get your rom version updated...follow Digital Outcast's guide and you should be fine...http://forum.xda-developers.com/showthread.php?t=505377
You have the incorrect SPL version. As Sean3 pointed out, read Digital Outcasts thread and decide whether you want to go the USPL or HSPL routes.
Once you follow guide indicated above your problems should be fixed. If not, post further queries in that thread
Ta
Rick
p.s. thread closed
Related
I flashed my Tilt for the first time lastnight to "Dutty's Official WM6.1 5.2.19199 UC RTM" and for some reason now my external speaker doesn't work at all... That means no clicks or chimes when I am operating my Tilt.... but worst of all that means no ringtones -_- I can't tell when people call me!
Am I missing some newbie setting?
you have to install a windows mobile 6.1. compatible radio ... like the radio rom in this unlocking package . http://forum.xda-developers.com/showthread.php?t=375583
Ugh... I was flashing a new radio file to try to fix my speaker issue, and it locked up at 95%... apon reboot I have the tri colored screen... and I had to use the Whitescreen fix to get it to flash to 95%.... Now that I am stuck at the tri color screen I can't seem to get it to work again (since I can't get in to run the white screen fix program on my Tilt).
Any suggestions?
MOD EDIT: This is a cross post and unrelated to the original thread question. - Cross posting breaches our rules.
You have started a new thread duplicating this post!!
do you have hard spl already installed ?
or is the original bootloader on the phone ?
you have first to install the bootrom to flas another radio or another rom than the original htc .
if your bootrom is already working there would be no problem and you can flash again .
press and hold camera and on button and force a reset with the stylus , press both buttons until the three coloured screen comes up , then you can gave the flas another try .
MOD EDIT: Sorry, the thread creator is confusing us all by posting the same question in two different threads and I have closed this one!!. But thanks for trying to help.
You really must read more. There are warnings posted in the ROM thread about using the correct radio.
There have been several threads posted about why sound has suddenly stopped working.
This thread is now redundant. In fact a quick search would have avoided the need to create it and you would have had your answer sooner
Mike
After flashing miris wm 6.5 rom onto my blackstone the screen has gone multicoloured, mainly blue until i press the top button which turns off the screen. It also freezes really often which then become unresponsive other than when you touch the volume or standby buttons . It also wont connect to my sim card either.
I have tried installing different roms but i get the same thing for all of them.
Can anyone help me.
Much appreciated,
Billy
.
Very common problem, gets asked every few days.
Check your SPL version and read the stickies about how to upgrade to HSPL 1.56 or SPL 1.54, http://forum.xda-developers.com/showthread.php?t=505377
Read forum rules! Search, search, search before posting.
Section in wiki regarding this.
Also read dummies guide link provided by pw120
Thread closed
Hy Guys,
I just hard spld my HTC Touch HD and all the colors of the screen look
oil smudged every time i boot up the device.
The htc logo , the wm6.1 screen have this problem
and after i refresh the screen (sleep button) it comes back to normal.
and everytime i reset the phone its the same thing until I refresh the screen
can anyone help me out ??
thank you
the attached image is a render of how horrible the screen looks.
Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again
from OliNex's post:
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
read more here
You flashed a 1.56+ ROM without having the 1.54 SPL! As suggested, use the Dummies Guide to flash HSPL. Or if you want to use USPL flash an official 1.56+ ROM first! (Then reflash this one.)
TronC said:
Bad flash? Probably no HardSPL installed?
I suggest you read the Dummies Guide to see if you flashed correctly.
Then you can follow the steps to get your Blackstone normal again
Click to expand...
Click to collapse
Common problem, posted countless times before. Try a little research before starting new thread. Any further problems, post in Dummies Guide thread
Thread closed
I used Unsigned_HardSPL_for_Blackstone_OliNex 1.56 then i used
RUU_BlackStone_HTC_TUR_1.56.468.0_Radio_52.62.25.34_1.13.25.24_Ship
to change it to turkish.
It seem to all go well but,
Now when i start the phone the colors are all wrong as if it is running @ a very low resolution.
I have attaced a few pictures to show the situation.
Also if you look @ the last picture you can see that when i power off then power back on the resolution is correct but the screen seems
very unresponsive.
I have tried to Restore_Stock_SPL_113 but not actually sure if it was the same one.
I have also tried USPL GUI v 2.5 (no difference)
I have tried HD_WM65__V63__B23053COM3__D091809
And i have finally tried Miri_WM65_23017_Premium_Manila_2.5_REV7.1
I dont no what else to do i have searched and read various posts regarding what i actually wanted to do and how to retify this problem but i cant find a solution.
If anyone has any answers i would really appriciate it.
If the answer has been looking me in the face and i have miss it im sorry.
Thanks.
just install the newest stock rom from the htc website and then the rom of your choice.
then the colors will look normal again
It looks like your spl is wrong for the rom, the colour problem is typical of this situation.
You mention that you tried hspl - 1.56.Olinex. Are you sure it installed successfully? If you go into bootloader mode, does it show 1.56.Olinex on screen? Any one of the roms you mention should work perfectly with 1.56. Please take any other queries to the Dummies Guide thread as the mods will close this one down.
As above, it looks like your SPL is incorrect and HSPL 1.56 has not been successful. Check your SPL in bootloader and post further queries in the dummies guide thread.
Thread closed
Hi,
I have my HD from march and being interested in WM6.5 and disappointed by HTC because they do not release an upgrade I decided to try some cooked roms.
I used USPL so that I can keep my original SPL.
I tried:
* Duttys WM6.5 Sense 2.1 Holy Grail
* Duttys WM6.5 Leo Holy Grail
* Topix HD
From the first boot I have noisy screen image with 4 colours or something .... but after entering in sleep mode and restore it recovers to normal "true color" until I reset the device. I can live with that but the real issue is that I cannot start my phone using the original radio neither with the latest versions I found for HTC HD. No error there, it simply stays off after I confirm that I want to enable the phone.
Also the device is hanging for very long time now and then and I have exactly the same problem/behaviour with all the above roms. I tried some fixes found in the forum but nothing works and I did not found anybody with the same weird behaviour.
I wand to recover my stock firmware but I found that even I brought mine from Romania it has a Czech S/N and HTC does not provide a stock ROM for this "v1.56.402 - Czech republic - not supported".
What can I do. do you guys know if I can get the original firmware from somewhere?
Thanks.
Obviously you havent bothered to read anything let alone the guidelines of starting new threads.
The answers are in the forum I suggest you take time to read and start by reading the forum guidelines and the sticky threads.
If you dont understand what you're doing then stick to a stock ROM until you do or you might brick your phone.
You say that you used uspl. Are you sure that it was successful as the symptoms you describe are typical when you have the incorrect spl for the rom you are using. After using uspl, what spl is showing in the bootloader screen?
Follow the steps in the Dummies Guide to Flashing and your problems should be sorted out.
If you still have further questions, post them in that thread as the mods will close this one as soon as they come across it (as explained by homer285)
you're ok as long as you can still go to bootloader mode, then go back to the uspl 2.5 guide here, FOLLOW INSTRUCTIONS STEP BY STEP
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file) OR BlackstoneRUUWrapper (whichever the ROM cook presents) copy these TWO files in your formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
I hope I make the above clear to you.
suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to flash 6.5 and it is almost fail-safe.
good luck!
brumbrum said:
suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to do it and it is almost fail-safe.
good luck!
Click to expand...
Click to collapse
dont add to the confusion, he is already using USPL, the SAFEST METHOD as stated by Dutty Throy, he even advocates this in all of his cooked ROMs
all he needs to do is to redo the steps again as i posted above.
Sorry for my panic post
Yes, after 8 hours of trying stuff I did not read post guide-lines but I searched all the internet and xda forums, tried all the dumb fixes for my weird behaviours without any success.
I am sure that my original rom it is not available and I call for help from people that have Czech S/N English version to extract the flash and the radio if it is no so complicated or if they have it as backup.
Actually I read every "flashing for dummies" posts and only when I thought I got everything I started to flash it.
I used the latest 2.5 USPL, the GUI one and also the command line from the cmd prompt so I saw all the output lines and there was no error at all. It is clear that the device was successfully flashed and I respected all the version requirements stated in description of the packages. The problem comes from some sort of incompatibility. The versions at boot is the right one.
The only wrong thing I did was after seeing USPL 2.5 coloured boot loader I go on with the tutorial which said to read on screen RUU instructions which said to connect with activesync and I did as they said and restart the device, cradle and continue flashing in which case the original SPL started and I got a flashing error on the desktop client but after restarting the device everything run normally with the stock firmware and I think I have a good understanding on how it work and I can say that that error does not hurt a bit.
I finally succeed, in the morning, to flash 6.1 vanilla topaz and almost everything works except the GPS module and I am investigating this issue.
It is clear that you cannot help me an my device issue related to WM6.5 roms are unique and I will investigate this on my own.
Sorry to everybody, again, for my wrong located post and have a nice day.