Radio Update error at 32% on VPA III ! - MDA III, XDA III, PDA2k, 9090 Software Upgrading

My Radio Update sucks at 32% with Error 114 ! Want to Upgrade from 1.06 to 1.15 ! I also tried lower Versions, but always the same ! It goes to 32% fine, and then i will get the Error ! I have read all the Wiki and tried all files from xda ! Downgrade from 6.5 to WM2003 also made, but there are same Problem. Now i get the message no GSM at start ! What can i do ? Please help me !

What OS are you using to flash, because you will experience problems if you use anything but XP.

but in my experience, after trying to upgrade with vista or 7 it aborts once and then never lets you start an upgrade process again because of the new drivers, it wouldn't stop at the same point every time. that's why i didn't ask that question

Thanks for your answers friends ! But i did it all at Win XP ! I can also flash every firmware without probs, but with the radio it stops ever at 32% ! Is there a chance to bring any radio rom to the VPA ??

when you have tried so much, that you are really fed up, maybe you want to try mtty. i am not an expert when it comes to that, but it is like a command prompt or powershell to do about everything with your device, you can format it completely and then re-flash it with a radio rom and a normal rom, that's what i would do next, because there must be something about that 32%, maybe there is still something of a corrupted radio in there, that can't be deleted by the normal flashing because that is a straight forward input process.
if you want to give it a try, look it up in the wiki i really can't say much about it, as i never tried it.

Thanks Tony ! Yes i would take a look at the mtty ! I have found mtty and followed the instructions ! Set 14 0 then task 28 then task 0 ! But always the same, it hang up at 32% ! Here my log from mtty 1.42 !
set 14 0
HTCST عبزHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
USB>
After this i made a reset and tried to flash Radio. Error 114 at 32% !
Someone have a new tip ??

sorry for my english,
4 year i search the solution for error 114 and NO SOLUTION :x
search old post sorry

Related

problems ugrading to wm5

hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan
wiki
pls read wiki
you need to formate the device
camera+recoder button thing
i did exactly that and had usb come up on screen but still no joy.
Cheers
hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............

BA turns off while rom upgrade

i tried to upgrade to wm6 from wm3 on my ba and i got stuck at seria usb v2.07,
now i know i can ugrade the ext rom and radio but im still having problems w the rom, the phone turns off and i dont know why, keep telling me errors,
any help? everything seem to work fine untill stage 3. i tried to do it alone, but nothing,
i even tried the 1.42 radio rom update, the wm6 from heli and others. using ma......noid instead of the ba....
tried mtty, usb, task 14 0, 28 55aa, 0, and nothing. even set...
any idea where to look?
c on, this thing is still alive!!!
sx66 cingular
Model Number PH20B1
Minor Version Number B 1
Language Code WWE
Minor E
Operator code XGULA001
   
Rom Version 1.33.10
Minor 1 0
Extended ROM Version 1.33.110
Radio Version 1.02.10
Minor 02.10
you need to open your ba and check the switch that works with the battery holder natch.
try to flash your ROM in that screen...
that's the BOOTLOADER Screen...
the thing is... that "sometimes" the RUU doesnt recognize that our BA is already in that mode after executing EnterBL.exe(Enter Bootloader), so it hangs or sometimes throw an error that you are disconnected.
and since your BA is already in the "BL" Mode.
try and restart flashing from that screen, it would go smoothly...
P.S.
to be sure...
BEFORE YOU START FLASHING...
make sure you have enough batteries left.
AND
kill all the RUU Processes from the task manager... (Ma...NoID.exe)
thank you for the input
i really apreciate it. a lot. i need ideas.
unfortunately SilverSamurai tried everything u said, and nothing worked. keep telling me error 112. even after i removed the enterBL.exe and after trying diffrerent versions. all with ma...noid.exe.
im ordering the screwdrivers, but im sorry Sandstorm, but i dont know exactly what i have to look for.
im trying to find the switch that works with the battery holder natch in wiki with no luck. ill keep working on this.
thank you in advance. hope i can solve this to close the thread and being helpful in any way.
nice day
pardon me for correcting... it's the battery "Notch" switch...
it's the switch behind the "thingy" that you push to lock the battery in place.
too bad i dont have another camera with me, so all i can do is describe it.
when you remove the back cover...
just look "bottom-center" where an "insy-bitsy" toggle switch reside.
... i'll try to search for a solution too... and post anything i find in here...
ok
thank you for the input again.
i finally open my ba, and i get to the switch that works with the battery holder notch, it seems to work fine, still, dont know if it has to be up or down while working with the ba. i guess down, but im not sure.
do you know?
thanks again
i found this posts from another thread it is titled Error 112 CE ROM Update Error it mentioned requiring a clean pc setup.
i hope that works.
im still on it
thanks
but im giving up. ill keep on it while i can. nothing worked for me.
thanks any way. i love this forum.
now on nike! touch dual Spanish Version....
sniff sniff
ok
i opened it and i taped it w the bettery holder notch.
just in case anyone can help me telling me whether im in the right direction.
thank you for your the help
ill keep fighting
http://www.youtube.com/watch?v=JG4fmly_Fiw
push the notch up...(grrr... i thought it was a switch... press down... you're right)
have you tried a different battery?
i dont recall the Radio having 1.42.00 versions... that's WM2003SE and it has the radio version of 1.13.00....
just start with upgrading the Radio Rom ONLY... upgrade it with the one found in the BA Wikis... Version 1.15.00.
Then if it is successfull try flashing with Xplode's WM6.1 found in stickies...
dont bother with the extrom... just install/flash those two above....
and use XP not Vista/ Remove the SD Card.
post what happens...

HardSPL Update stops at 0%

Hi
I have this problem if i want to update my SPL to HardSPL, i does not flased anything yet, because i get my phone today!
Try another version of HardSPL.
i second that use a differant one.
I tried all Versions of HardSPL but nothing works ...
btw. is it rght to go into the colored screen by turning off the phone, then turn it on with the volume down button?
depends what version diamond rom you have and to wich rom you want to upgrade, its usually mentioned wich spl is best in the rom-thread
rushing into this forum and blindly flashing can lead to a brick aka dead phone so take great care when proceeding
I'm having the same issues and I tried all the HardSPL versions myself.
once the upgrade begins, the phone screen just hangs and the installation is stuck at 0% for a while. After which it gives me either one of the following errors:
Error 202 Connection
Error 260 Connection
Only a restart of the phone will release it from the hang.
Yes I used it, but no luck.
@ some 1
even i got same problem with my diamond i m not able to understand where i went wrong...any help appreciated
same proplem
i have same proplem.. first everything looks just fine but when i try to update it stuck couple of seconds at 0% and then it gives error 202
same problem here..
+1
+1
+1
+1
+1
+1
+1.................

Hang in bootloader

Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500

Help! Problems flashing X1

Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.

Categories

Resources