Database Develop

Constant Soft Bricking on all but JF Builds (Solved)

I just got my phone back from HTC (wifi wnt on it and a battery leak tons of fun). I've been able to root the phone and get the new radio, SPL, and latest JF build on the phone but for some reason I can't get any other build on there that works. All the Hero builds seem to be force closingg during the HTC setup wizard right before it starts to sync so I can't get into the build, and all non hero builds freeze at the G1 T-Mobile screen.
I've tried formatting and reformatting my phone but nothing seems to work. I was going to test out the swapper builds so I just created a swapper partition (tried Paragon, Gparted, and the built in G parted for my ext2/3 and swapper partitions). Then I tried removing the swap partition and I still can't get any builds other than the JF builds to work. Does anyone have any ideas as to what is going on or having similar issues?
Update:
Solved the problem by using ADB to push the /system/framework and /system/lib from the latest Cyanogen build. Immediately afterwards I updated to that same version of Cyan's and it finally went past the T-Mobile Screen and after taking a fairly long time it booted. Initially I got this weird error where the screen was clearly on (could turn volume up and down) but the screen was black. From there I did a wipe and ran the update one more time and it went through perfectly and now I'm running cyan's latest build.
Thank you everyone for your suggestions and assistance. The builds were all hanging because it couldn't overwrite certain files in system and framework but its functioning now so thats all that matters. Thanks again!

Did you wipe before you update? You should have a fresh ext2/3 before flashing.

Yes I've tried wiping and doing non-wiped installs both land me in the same spot though. I've also formatted my ext 2 tried using ext 3 and removing and keeping the swap partition. I am using the stock sdcard too btw.

have you tried going through the htc setup wizard without turning on wifi because turning on wifi whhen the pop-up appears is said to sometimes fc the process?

I believe this is not a development forum question. I think you should read over everything carefully. If you did indeed root your phone right and have some basic idea of what you are doing then you should NOT have too many problems. If you are going from one build to another I would suggest doing a wipe. Other than that everything you said is kinda vague.

NYSteeler98 said:
have you tried going through the htc setup wizard without turning on wifi because turning on wifi whhen the pop-up appears is said to sometimes fc the process?
Click to expand...
Click to collapse
I had a similar problem but only with Hero builds and not letting it turn on Wifi stopped the forceclose/reboot.
That it won't let you use other google based builds is very peculiar.

have you tried going through the htc setup wizard without turning on wifi because turning on wifi whhen the pop-up appears is said to sometimes fc the process?
Click to expand...
Click to collapse
I never turn on the wifi during the setup it doesn't usually ask me either. I'm in a constant 3G surrounding so I never use the wi-fi to be honest.
I believe this is not a development forum question. I think you should read over everything carefully. If you did indeed root your phone right and have some basic idea of what you are doing then you should NOT have too many problems. If you are going from one build to another I would suggest doing a wipe. Other than that everything you said is kinda vague.
Click to expand...
Click to collapse
I'm sorry if I'm posting in the wrong forum but I figured this is where I am most of the time and I see a lot of questions answered here. Anyway I used to be a flash junkie and I've used every build on the forums until my phone broke and I had to send it in for repairs. Unfortunately since I had my board replaced I've been running into problems. I have a PVT board for the record not a DVT which has been a problem in the past with the new SPL. I never had issues until I got my phone repaired but I didn't want to rule out the new partitoning of my card. Since my last post I've tried removing all the partitions and just going to single FAT32 partition and I still can't seem to get any builds (more specifically I've been trying latest Dudes, Cyanogen, JACHero, and JACHeroski builds.) As for being vague the problem to me is kind of vague. I'm tried so many different avenues trying to narrow the problem down to the card or the builds but it starting to lean toward the board being the problem here. I'll give any specifics just tell me what you wanna know.

try flashing the rom, then remove the sd before restarting, put it back in once the phone has completed setup wizard.

I believe that new board = new (to you) radio and SPL. ie, the old (stock) SPL, and possibly the old radio. boot it into the SPL and check ur versions.
personally if i got a new board i would start from square one. flash to RC29, root hack, radio/SPL update then ROM update. the works. if that doesnt fix your issue, well then i dunno.
EDIT: I believe this would explain why you're able to flash JF, but not others. JF doesn't require the custom SPL (pretty sure), whereas most others do.
Metatronx said:
I never turn on the wifi during the setup it doesn't usually ask me either. I'm in a constant 3G surrounding so I never use the wi-fi to be honest.
I'm sorry if I'm posting in the wrong forum but I figured this is where I am most of the time and I see a lot of questions answered here. Anyway I used to be a flash junkie and I've used every build on the forums until my phone broke and I had to send it in for repairs. Unfortunately since I had my board replaced I've been running into problems. I have a PVT board for the record not a DVT which has been a problem in the past with the new SPL. I never had issues until I got my phone repaired but I didn't want to rule out the new partitoning of my card. Since my last post I've tried removing all the partitions and just going to single FAT32 partition and I still can't seem to get any builds (more specifically I've been trying latest Dudes, Cyanogen, JACHero, and JACHeroski builds.) As for being vague the problem to me is kind of vague. I'm tried so many different avenues trying to narrow the problem down to the card or the builds but it starting to lean toward the board being the problem here. I'll give any specifics just tell me what you wanna know.
Click to expand...
Click to collapse

Metatronx said:
Yes I've tried wiping and doing non-wiped installs both land me in the same spot though. I've also formatted my ext 2 tried using ext 3 and removing and keeping the swap partition. I am using the stock sdcard too btw.
Click to expand...
Click to collapse
stock sd card may be the problem. some of the ones that shipped with the phone were not of highest quality (mine sucked, and after a couple of weeks died completely)

phantasm714 said:
I believe that new board = new (to you) radio and SPL. ie, the old (stock) SPL, and possibly the old radio. boot it into the SPL and check ur versions.
personally if i got a new board i would start from square one. flash to RC29, root hack, radio/SPL update then ROM update. the works. if that doesnt fix your issue, well then i dunno.
Click to expand...
Click to collapse
I agree with this.

personally if i got a new board i would start from square one. flash to RC29, root hack, radio/SPL update then ROM update. the works. if that doesnt fix your issue, well then i dunno.
Click to expand...
Click to collapse
Thats exactly what I did as soon as I got back that was the only way to get root on the phone that I knew of. I did it a few times but I still kept getting stuck on the Tmobile G1 screen when upgrading to any of the differnet mods.
try flashing the rom, then remove the sd before restarting, put it back in once the phone has completed setup wizard.
Click to expand...
Click to collapse
Tried this and unfortunately it didn't work. as for my Phone type, SPL and Radio I have the following :
I'm using DREAM PVT 32b Eng S-OFf
Hboot-1.33.2005 (DREA100000)
Radio-2.22.19.26I
I grabbed the log from my phone for anyone that knows what this stuff means (btw this is right after updating to the newest cyanogen build 3.6.6.
D/AndroidRuntime( 127): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 127): CheckJNI is OFF
D/AndroidRuntime( 127): --- registering native functions ---
I/Zygote ( 127): Preloading classes...
D/dalvikvm( 127): GC freed 763 objects / 42176 bytes in 6ms
D/dalvikvm( 127): GC freed 279 objects / 17272 bytes in 6ms
D/dalvikvm( 127): GC freed 207 objects / 12368 bytes in 7ms
D/dalvikvm( 127): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 127): Added shared lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 127): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 127): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 127): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 127): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 127): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 127): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 127): GC freed 453 objects / 28496 bytes in 9ms
D/dalvikvm( 127): GC freed 3700 objects / 182672 bytes in 21ms
D/dalvikvm( 127): GC freed 11157 objects / 394176 bytes in 35ms
D/dalvikvm( 127): GC freed 10092 objects / 420776 bytes in 43ms
D/dalvikvm( 127): GC freed 10993 objects / 461000 bytes in 48ms
D/dalvikvm( 127): GC freed 563 objects / 23888 bytes in 27ms
D/dalvikvm( 127): GC freed 15400 objects / 556824 bytes in 53ms
D/dalvikvm( 127): GC freed 10428 objects / 444024 bytes in 48ms
D/dalvikvm( 127): GC freed 6023 objects / 251432 bytes in 41ms
W/zipro ( 127): Zip inflate failed, zerr=-3 (nIn=0x423b5863 aIn=204260 nOut=0
x42631a79 aOut=1291603)
W/zipro ( 127): Zip inflate failed, zerr=-3 (nIn=0x423b5863 aIn=204260 nOut=0
x42631a79 aOut=1291603)
W/ResourceType( 127): Unable to get buffer of resource asset file
W/dalvikvm( 127): Exception Landroid/content/res/Resources$NotFoundException; t
hrown during Landroid/text/AutoText;.<clinit>
D/AndroidRuntime( 127): Shutting down VM
W/dalvikvm( 127): threadid=3: thread exiting with uncaught exception (group=0x4
000fe70)
D/dalvikvm( 127): DestroyJavaVM waiting for non-daemon threads to exit
D/dalvikvm( 127): DestroyJavaVM shutting VM down
D/dalvikvm( 127): VM cleaning up
D/dalvikvm( 127): LinearAlloc 0x0 used 1172572 of 4194304 (27%)
D/skia ( 127): purging 6K from font cache [1 entries]
D/AndroidRuntime( 128):
D/AndroidRuntime( 128): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 128): CheckJNI is OFF
D/AndroidRuntime( 128): --- registering native functions ---
I/Zygote ( 128): Preloading classes...
D/dalvikvm( 128): GC freed 763 objects / 42176 bytes in 6ms
D/dalvikvm( 128): GC freed 279 objects / 17272 bytes in 5ms
D/dalvikvm( 128): GC freed 207 objects / 12368 bytes in 7ms
D/dalvikvm( 128): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 128): Added shared lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 128): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 128): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 128): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 128): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 128): Trying to load lib /system/lib/libmedia_jni.so 0x0
D/dalvikvm( 128): Shared lib '/system/lib/libmedia_jni.so' already loaded in sa
me CL 0x0
D/dalvikvm( 128): GC freed 453 objects / 28496 bytes in 9ms
D/dalvikvm( 128): GC freed 3700 objects / 182672 bytes in 21ms
D/dalvikvm( 128): GC freed 11157 objects / 394176 bytes in 38ms
D/dalvikvm( 128): GC freed 10092 objects / 420776 bytes in 47ms
D/dalvikvm( 128): GC freed 10993 objects / 461000 bytes in 48ms
D/dalvikvm( 128): GC freed 563 objects / 23888 bytes in 27ms
D/dalvikvm( 128): GC freed 15400 objects / 556824 bytes in 54ms
D/dalvikvm( 128): GC freed 10428 objects / 444024 bytes in 49ms
D/dalvikvm( 128): GC freed 6023 objects / 251432 bytes in 41ms
W/zipro ( 128): Zip inflate failed, zerr=-3 (nIn=0x423b5863 aIn=204260 nOut=0
x42631a79 aOut=1291603)
W/zipro ( 128): Zip inflate failed, zerr=-3 (nIn=0x423b5863 aIn=204260 nOut=0
x42631a79 aOut=1291603)
W/ResourceType( 128): Unable to get buffer of resource asset file
W/dalvikvm( 128): Exception Landroid/content/res/Resources$NotFoundException; t
hrown during Landroid/text/AutoText;.<clinit>
D/AndroidRuntime( 128): Shutting down VM
W/dalvikvm( 128): threadid=3: thread exiting with uncaught exception (group=0x4
000fe70)
D/dalvikvm( 128): DestroyJavaVM waiting for non-daemon threads to exit
D/dalvikvm( 128): DestroyJavaVM shutting VM down
D/dalvikvm( 128): VM cleaning up
D/dalvikvm( 128): LinearAlloc 0x0 used 1172572 of 4194304 (27%)
D/skia ( 128): purging 6K from font cache [1 entries]
D/AndroidRuntime( 129):
Thank you everyone for your help so far.

It may be an odd suggestion, but try flashing JF RC-33. Ive had a somewhat similar problems with versions of TheDude's cupcake where it would one day just suddenly bootloop, and would keep doing it even if I wiped and flashed it 1000 times, but oddly enough, flashing RC-33 and then flashing another rom (Dude's in this case) would work. It may be worth a shot.

I tried flashing down but its still the same situation where I can only use JF builds now everything is giving me dalvik-vm errors in logcat as well as core.jar in the /system/framework errors. I'm trying to get there.

Everytime I reboot, phone sticks, and have to reinstall Cyanogen 4.

good day, I installed Cyanogen v4.0.2 a couple of days ago. I have restarted the phone 3 times and each time I restart the phone, it gets stuck on the android logo screen and I end up having to wipe and reinstall.
I searched and have found a couple of people with the same problem but no solution. Does anybody have a solution to this problem? thanks a lot.

A8000 said:
good day, I installed Cyanogen v4.0.2 a couple of days ago. I have restarted the phone 3 times and each time I restart the phone, it gets stuck on the android logo screen and I end up having to wipe and reinstall.
I searched and have found a couple of people with the same problem but no solution. Does anybody have a solution to this problem? thanks a lot.
Click to expand...
Click to collapse
Are you running a2ssd? if so then try fixing permissions, if that fails format your sd card (at least ext partition).
Easiest way to tell if your card is corrupted is to try booting without it.
Good luck.

borodin1 said:
Are you running a2ssd? if so then try fixing permissions, if that fails format your sd card (at least ext partition).
Easiest way to tell if your card is corrupted is to try booting without it.
Good luck.
Click to expand...
Click to collapse
thanks for your response. I haven't dl'd a2ssd because I thought with Cyanogen 4 it automatically saves apps to sd?
I tried restarting my phone with and without the sd card in it.
Also before I rooted I did fat32 with my 2gb sd card. thanks for any help.

A8000 said:
thanks for your response. I haven't dl'd a2ssd because I thought with Cyanogen 4 it automatically saves apps to sd?
I tried restarting my phone with and without the sd card in it.
Also before I rooted I did fat32 with my 2gb sd card. thanks for any help.
Click to expand...
Click to collapse
CM roms (and any roms) will do apps to sd only if you have secondary partition (ext2, ext3 or ext4). If you did not partition your card then you don't have apps on sd and they are all in your internal memory.
Run logcat and post it here... hard to say what's causing it without seeing a log. Most of the time it will loop because of corrupt partition on sd card but it's clearly not the case here.
One more thing that you can try is restart in recovery and run these commands
mount data
rm -r data/dalvik-cache
mkdir data/dalvik-cache
reboot
This will clear out all odex files and force android to re-optimize all apps. It may or may not sort things out.

i ran logcat and it's several pages of logs, i saved it, but can't find it when i mount sd to post it, do I post the entire log, it's pretty long. I'm going to work so it may be 10 hours before I can respond, but I'll try to check on lunch, thanks.

A8000 said:
i ran logcat and it's several pages of logs, i saved it, but can't find it when i mount sd to post it, do I post the entire log, it's pretty long. I'm going to work so it may be 10 hours before I can respond, but I'll try to check on lunch, thanks.
Click to expand...
Click to collapse
how long is it stuck for because on first boot mine is stuck for 10 - 15 mins

JJbdoggg said:
how long is it stuck for because on first boot mine is stuck for 10 - 15 mins
Click to expand...
Click to collapse
hmmm even that sounds too long... I've never had it booting for longer then 2 min on CM roms and longer then 4-5 min for Hero roms but everyone's mileage may vary.
As for the log.... once you find it - post it on pastebin.com or something like that or even here (just attach it instead of pasting it due to the size)

borodin1 said:
hmmm even that sounds too long... I've never had it booting for longer then 2 min on CM roms and longer then 4-5 min for Hero roms but everyone's mileage may vary.
As for the log.... once you find it - post it on pastebin.com or something like that or even here (just attach it instead of pasting it due to the size)
Click to expand...
Click to collapse
thanks for all the responses, my when i have restarted the phone it hangs on the android logo for over 20 minutes, i restart and it does the same so i end up wiping and reinstalling Cyanogen 4.
Borodin, i run logcat, then I save the log, but can't find the log on my phone. thanks

not sure... I usually just email it to myself if I run log app.

08-25 18:21:13.728 V/QualcommCameraHardware( 5332): receiveJpegPictureFragment: (index 0 status 7 size 16384)
08-25 18:21:13.728 V/QualcommCameraHardware( 5332): STATE CAMERA_FUNC_ENCODE_PICTURE // STATUS 11
08-25 18:21:13.728 V/QualcommCameraHardware( 5332): receiveJpegPictureFragment: (index 0 status 7 size 16384)
08-25 18:21:13.738 V/QualcommCameraHardware( 5332): STATE onClick content://media/external/images/media/36
08-25 18:21:16.468 D/CameraActionScreen( 9846): >>>>>>actionScreenSend<<<<<<
08-25 18:21:16.468 V/ImageManager( 9846): allImages EXTERNAL true + v=false
08-25 18:21:16.468 V/ImageManager( 9846): state is mounted
08-25 18:21:16.468 V/ImageManager( 9846): initializing ... haveSdCard == true; inclusion is 1
08-25 18:21:16.488 V/ImageManager( 9846): createCursor got cursor with count 36
08-25 18:21:16.488 V/ImageManager( 9846): for content://media/external/images/media got cursor [email protected] with length 36
08-25 18:21:16.528 V/ImageManager( 9846): MyDataSetObserver.onInvalidated: true
08-25 18:21:16.548 I/ActivityManager( 106): Starting activity: Intent { comp={com.android.camera/com.android.camera.IntentChooser} (has extras) }
08-25 18:21:16.578 D/CameraActionScreen( 9846): >>>>>>exitActionScreen<<<<<<
08-25 18:21:16.578 D/ResolutionSize( 9846): getSize
08-25 18:21:16.588 D/camera ( 9846): getResolutionSize THREE_MEGA_3_2 _super 850000.0
08-25 18:21:16.588 V/ImageManager( 9846): state is mounted
08-25 18:21:16.618 V/ImageManager( 9846): writable is true
08-25 19:06:38.402 D/Sensors ( 106): sensors=00000001, real=00000001
08-25 19:06:38.402 D/AKMD ( 89): Compass OPEN
08-25 19:06:38.492 D/SurfaceFlinger( 106): Screen about to return, flinger = 0x17b8f8
08-25 19:06:39.402 I/WindowManager( 106): onOrientationChanged, rotation changed to 0
08-25 19:06:42.002 D/KeyguardViewMediator( 106): pokeWakelock(10000)
08-25 19:06:42.002 D/KeyguardViewMediator( 106): Statusbar unlocked
08-25 19:06:42.052 W/InputManagerService( 106): Window already focused, ignoring focus gain of: [email protected]
08-25 19:06:43.592 D/dalvikvm( 9980): GC freed 4160 objects / 242392 bytes in 197ms
08-25 19:06:43.602 I/dalvikvm( 9980): Uncaught exception thrown by finalizer (will be discarded):
08-25 19:06:43.602 I/dalvikvm( 9980): Ljava/lang/IllegalStateException;: Binder has been finalized!
08-25 19:06:43.602 I/dalvikvm( 9980): at android.os.BinderProxy.transact(Native Method)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.database.BulkCursorProxy.close(BulkCursorNative.java:312)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.database.BulkCursorToCursorAdaptor.close(BulkCursorToCursorAdaptor.java:125)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.database.CursorWrapper.close(CursorWrapper.java:45)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.content.ContentResolver$CursorWrapperInner.close(ContentResolver.java:738)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.content.ContentQueryMap.close(ContentQueryMap.java:163)
08-25 19:06:43.602 I/dalvikvm( 9980): at android.content.ContentQueryMap.finalize(ContentQueryMap.java:169)
08-25 19:06:43.602 I/dalvikvm( 9980): at dalvik.system.NativeStart.run(Native Method)
08-25 19:06:44.072 D/dalvikvm( 9980): GC freed 472 objects / 27248 bytes in 169ms
08-25 19:06:48.782 I/ActivityManager( 106): Starting activity: Intent { action=android.intent.action.MAIN categories={android.intent.category.LAUNCHER} flags=0x10200000 comp={com.xtralogic.android.logcollector/com.xtralogic.android.logcollector.SendLogActivity} }
08-25 19:06:49.232 I/ActivityManager( 106): Start proc com.xtralogic.android.logcollector for activity com.xtralogic.android.logcollector/.SendLogActivity: pid=10049 uid=10037 gids={1007}
08-25 19:06:49.752 I/ActivityManager( 106): Process com.appspot.swisscodemonkeys.camera (pid 10031) has died.
08-25 19:07:00.632 I/ActivityManager( 106): Displayed activity com.xtralogic.android.logcollector/.SendLogActivity: 11852 ms
08-25 19:07:00.812 I/global (10049): Default buffer size used in BufferedReader constructor. It would be better to be explicit if an 8k-char buffer is required.

Anybody have any solutions? thanks

i just restarted for the 4th time and its stuck on the android logo for the past 30 minutes, one time it got past the android and went to a black screen and it stayed there for 15minutes before i took the battery out.

What's the state of your SD? (what partitions do you have)
If your ext is clean and you're wiping before each flash then there should be no looping.

DexOpt: incorrect opt magic number/Size mismatch on inflated file/ Unable to extract+

Hey guys,
Been beating my head against this for weeks. (see the history of my lament here http://forum.xda-developers.com/showthread.php?t=597987)
This all happened after I installed Android 2.0 EOSP and death SPL.
I'm unable flash new roms, I get the below error loop (see code) whenever I try and install cyanogen mod (yes I'm doing it properly as I've done it 30 times before).
I've tried a goldcard.
I've tried all the perfected SPL tricks outlined here to no avail (http://forum.xda-developers.com/showthread.php?t=570659 &
http://forum.xda-developers.com/showthread.php?t=529019)
I've tried:
Engineering SPL 1.33.2010
Engineering SPL 1.33.2009
Engineering SPL 1.33.2005
Engineering SPL 1.33.2004
Engineering SPL 1.33.2004 by Crios
The only two things I can do are restore 1 single nandroid (I have like 6, only one works) or sappimg.nbh.
My phone is a MT3G, it IS rooted.
Amon RA recovery image 1.5.2G
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2004 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
Code:
D/AndroidRuntime( 145): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 145): CheckJNI is OFF
D/dalvikvm( 145): DexOpt: incorrect opt magic number (0xff ff ff ff)
D/dalvikvm( 145): Stale deps in cache file; removing and retrying
W/dalvikvm( 145): Size mismatch on inflated file (5592188 vs 5595128)
E/dalvikvm( 145): Unable to extract+optimize DEX from '/system/framework/framework.jar'
D/dalvikvm( 145): Unable to process classpath element '/system/framework/framework.jar'
D/AndroidRuntime( 145): --- registering native functions ---
E/JNIHelp ( 145): Native registration unable to find class 'android/debug/JNITest'
E/AndroidRuntime( 145): Unable to register all android natives

Any ideas?

wow im impressed you tried every SPL in the book and havent bricked your phone lol.
anyway the best SPL for mytouch 3g is 1.33.2005, make sure its the engineering SPL (This one)
then try flashing a rom again.
also it would help to post the info on your bootloader menu ( all the stuff on top)

melterx12 said:
wow im impressed you tried every SPL in the book and havent bricked your phone lol.
anyway the best SPL for mytouch 3g is 1.33.2005, make sure its the engineering SPL (This one)
then try flashing a rom again.
also it would help to post the info on your bootloader menu ( all the stuff on top)
Click to expand...
Click to collapse
I've tried that SPL as well, also I did post the stuff on top although it'll vary from SPL to SPL
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2004 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
So far EVERYTHING I've tried other than sappimg.nbh Or one of my nandroid restores, I get the boot error loop that I listed above.

well install the 2005 spl to be sure, go into recovery, wipe data, format sd card, and flash a fresh rom.

I did that after your post. Still get the same error.
Any other ideas?

I also tried this with a brand new SD card.

Potato potato

i get the same problem, kingskilck 2.1 works but not much else besides, If anyone has any ideas please help!!!
D/dalvikvm( 620): DexOpt: incorrect opt magic number (0xff ff ff ff)
D/dalvikvm( 620): Stale deps in cache file; removing and retrying
W/dalvikvm( 620): Size mismatch on inflated file (6099448 vs 6103980)
E/dalvikvm( 620): Unable to extract+optimize DEX from '/system/framework/framew
ork.jar'
D/dalvikvm( 620): Unable to process classpath element '/system/framework/framew
ork.jar'
D/AndroidRuntime( 620): --- registering native functions ---
E/JNIHelp ( 620): Native registration unable to find class 'android/debug/JNITe
st'
E/AndroidRuntime( 620): Unable to register all android natives
I/ServiceManager( 164): service 'media.audio_flinger' died
I/ServiceManager( 164): service 'media.player' died
I/ServiceManager( 164): service 'media.camera' died
I/ServiceManager( 164): service 'media.audio_policy' died

Forget it....

no idea if this will work, but it won't do any harm to clear cache
( I see no mention of it above )
if you haven't already use the wipe dalvik-cache option in RA-1.5.2 ( or current version ) and reboot ( back button and choose option )
if you have tried this then try manually
drop to recovery console
Code:
mount /cache
rm /cache/dalvik-cache/*
if you get errors post them here
if not reboot
Code:
reboot
if that doesn't work...
go back into recovery
use all of the wipe options ( data/factory, dalvik-cache, sd:ext )
reflash, reboot
if that doesn't work I tried my best, but no harm in posting any observations you may have made while trying

"When the DEX file is created, the file header is first filled with
0xff. Then the rest of the file is written, and finally the header is
written. So, the "incorrect opt magic number" message just means that
a previous run of dexopt failed before the file was completely
written.
What you need to be looking at is the segmentation fault in dexopt.
You've broken something in the VM"
Just got this on google groups, does anyone know what this means?

Was a solution to this problem ever found?

I get this problem nearly every time I flash a ROM, and the way that I fix it is to unzip the ROM, find the "broken" jar file and re-upload it to the phone using adb as per this post by firerat:
Code:
forum.cyanogenmod.com/topic/2132-need-serious-help-cant-flash-any-cm-build-but-cm-6-nightly-tests/page__view__findpost__p__21040
I hope this helps...

Navigon on CM7

Because I saw often a question about navigon on CM7.
It works!
Found it in CM7 forum:
www.darav.de/android/
Have fun.

Thanks for the tip. Unfortunate I still can't get navigon to work.

What version to you use? Navigon 3.5.3? CM7 build from which day?
Could you post logcat output when starting navigon?

berndEEEE said:
What version to you use? Navigon 3.5.3? CM7 build from which day?
Could you post logcat output when starting navigon?
Click to expand...
Click to collapse
CM7 version 03022011. Navigon 3.5.3. Thanks for your help. Logcat output below. I also have tried Navigon Select 3.5.4 but no go as well.
When I applied the above fix phone wouldn't boot up. Did a system restore and all fixed in 5 minutes.
com.navigon.navigator_select_samsung_pac.provider.naviprovider: com.navigon.navigator_select_samsung_pac.provider.NaviProvider
D/NaviApp ( 2619): pn: com.navigon.navigator_select_samsung_pac
D/dalvikvm( 2619): GC_EXTERNAL_ALLOC freed 117K, 52% free 2658K/5447K, external 0K/0K, paused 24ms
D/NaviApp ( 2619): NaviKernel hasn't been started yet, ignore...
I/ActivityManager( 148): Displayed com.navigon.navigator_select_samsung_pac/.hmi.StartScreenActivity: +250ms (total +5s516ms)
D/dalvikvm( 2619): Trying to load lib /data/data/com.navigon.navigator_select_samsung_pac/lib/libNavinative.so 0x40513cb8
I/System.out( 2619): Cannot load library: reloc_library[1311]: 79 cannot locate '_ZN7android10AudioTrackC2EijiiijPFviPvS1_ES1_i'...
I/System.out( 2619): Trying NavinativeD...
I/System.out( 2619): Couldn't load NavinativeD: findLibrary returned null
D/NaviKernelConnector( 2619): NaviKernelConf.ini pkg_version = ANDROID_INI_VERSION = 1.5.8
D/NaviKernelConnector( 2619): NaviKernelConf.ini ins_version = ANDROID_INI_VERSION = 1.5.8
D/NaviKernelConnector( 2619): NaviKernelConf.ini is up-to-date
W/dalvikvm( 2619): threadid=9: thread exiting with uncaught exception (group=0x40015560)
I/Process ( 2619):

Before investigating further - please try to update to the new navigon version released today.

Ok. I downloaded 3.5.4 from the internet. Couldn't find it on the market. After it download the additional data it only has German and Austrian maps availabe to use. In the maps folder on my phone I have the Australian maps that I need. Is there a way I can get it to work on the Australian maps?
My phone product code is XEU but original is OPS. If I change that will it help so that it downloads the map I need?
In the app it does have an option to download more maps but I think all that will do is download more EU maps which are useless for me.
Well at least I now know it works, but currently maps are for a different country.

[NAND][CM9][ICS]testbuild for X1

I bored GB with theme ICS , i want TRUE ICS
Anddddd here testbuild for our X1
Testbuild 0 (ICS 4.0.1) : http://www.mediafire.com/?5l6ksjtlo2sq581
Testbuild 1 (ICS 4.0.4) : http://www.mediafire.com/?1g5ortcnorddfmm
Minor update: Testbuild 1.1 (back to ICS 4.0.3) : http://www.mediafire.com/?1e5ll41idxuda0y
+ remove apps not need
+ little speed up system
+ camera work but preview windows is not (you will see black screen but capture image is normal)
Click to expand...
Click to collapse
(or Mirror any host you like)
This is not my work, Our testbuild from HTC rhodium and Htc hero
Testbuild 0 (HTC rhodium ) : http://forum.xda-developers.com/showthread.php?t=1466357
Testbuild 1 (Glassmacka 1.4 ) : http://forum.xda-developers.com/showthread.php?t=1352149
Testbuild 1.1 (Evervolv_CM9_Heroc-port ) : http://forum.xda-developers.com/showthread.php?t=1620617
I'm is only a NOOB not a DEVELOPER
All credit to :Alex (kernel,lk), zargloub (kernel) , randomblame (rom ICS for rhodium) , TeamHeroICS , stritfajt (Glassmacka rom) , jordfaz (Evervolv_CM9_Heroc-port)
---------------------------------------------------------------------------------------------------------------------------------------------------
Install :
Testbuild0 :
1 - full wipe: data + cache + dalvik cache
*optional : flash Recovery 5.5.0.4
2 - flash the ROM zip
3 - the first boot will take awhile
Testbuild1 (Testbuild 1.1) :
lk bootloader of Alex is partition: System 114mb , Data 320mb ,it not enough for ics full install so i asked my friend (knowledge linux) to compile lk with change partition : System 200mb , Data 234mb
So if you want flash this rom ,first you must reflash lk (200mb System) :
http://www.mediafire.com/download.php?mim6vqlthxaz9vi
After flash lk, flash recovery again
1 - full wipe: data + cache + dalvik cache
2 - flash the ROM zip
3 - the first boot will take awhile
---------------------------------------------------------------------------------------------------------------------------------------------------
Bug (Testbuild 1.1) :
1) touchscreen need patch (fixed)
2) GSM (fixed)
3) screen rotate 180 (i mistake,not ro.sf.rotation that is ro.sf.hwrotation)
4) camera work (but preview windows is not )
5) Not Wifi
6) Not sound
7) Keypad need map

first thanks for your effort!
is recovery only for ics? cause with cm7 it's not working...

Elibl said:
first thanks for your effort!
is recovery only for ics? cause with cm7 it's not working...
Click to expand...
Click to collapse
no, recovery for all ,i tested (backup,restore) with cm7

Brickpsp said:
no, recovery for all ,i tested (backup,restore) with cm7
Click to expand...
Click to collapse
maybe upload is corrupted tried it several times via fastboot also with redownloading...

Elibl said:
maybe upload is corrupted tried it several times via fastboot also with redownloading...
Click to expand...
Click to collapse
i uploaded to mediafire
http://www.mediafire.com/?44yzf0027lmyfel

Brickpsp said:
i uploaded to mediafire
http://www.mediafire.com/?44yzf0027lmyfel
Click to expand...
Click to collapse
strange it just really doesn't work for me after flashing it via fastboot...
rom also doesn't boot...

Elibl said:
strange it just really doesn't work for me after flashing it via fastboot...
rom also doesn't boot...
Click to expand...
Click to collapse
you flash correct partiton 'recovery' ?
"fastboot flash recovery PATH/TO/RECOVERY"

Brickpsp said:
you flash correct partiton 'recovery' ?
"fastboot flash recovery PATH/TO/RECOVERY"
Click to expand...
Click to collapse
sure: fastboot flash recovery recovery.img

Elibl said:
sure: fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Weird , i flashed recovery again and it work ok
But recovery not important, you can use old recovery to flash ICS_test rom

just for informing i can boot now into ics but flashing and corrupted screen... but i saw it ;-)
for recovery it's really weird cause your last version you posted in zargloub's thread was working flawless for me don't know what could be the problem...

i will post testbuild1 after check a few functions to certain work
P/S : updated #1

hhmm with the kernel in zip i never got past your boot screen 'x1 forever' either i get stuck in there or in white lines during different driver inits or it reboots somewhere there
i tried a kernel i built from a combination of zargloub's and hackun's repo with this i got to the pin request but screen was corrupted and flashing between terminal lines and boot animation / ics pin request...
so far my experiences
EDIT: oh forgot here are keymaps: http://forum.xda-developers.com/showpost.php?p=21956852&postcount=52

Elibl said:
hhmm with the kernel in zip i never got past your boot screen 'x1 forever' either i get stuck in there or in white lines during different driver inits or it reboots somewhere there
i tried a kernel i built from a combination of zargloub's and hackun's repo with this i got to the pin request but screen was corrupted and flashing between terminal lines and boot animation / ics pin request...
so far my experiences
EDIT: oh forgot here are keymaps: http://forum.xda-developers.com/showpost.php?p=21956852&postcount=52
Click to expand...
Click to collapse
It will load very slow in first time, if you want know what's android loading, use command "adb logcat"
P/S: i tried your keymaps, it not working ,maybe ics mapping difference gb or system not load

Brickpsp said:
It will load very slow in first time, if you want know what's android loading, use command "adb logcat"
P/S: i tried your keymaps, it not working ,maybe ics mapping difference gb or system not load
Click to expand...
Click to collapse
you are right .kcm.bin is now .kcm and in java code i will make the maps for you but give me some time it's a hell of work
one time i got a connection via adb and it rebooted after:
Code:
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
afterwards i never got a connection via adb no matter if stuck before boot screen or in it also after fresh installation
and for you it boots every time fine into the rom?

Elibl said:
you are right .kcm.bin is now .kcm and in java code i will make the maps for you but give me some time it's a hell of work
one time i got a connection via adb and it rebooted after:
Code:
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
afterwards i never got a connection via adb no matter if stuck before boot screen or in it also after fresh installation
and for you it boots every time fine into the rom?
Click to expand...
Click to collapse
yes ,boot with no fail
When boot screen load ,you must wait a little ,after that type "adb logcat"
you can check partition system by commands "adb shell" after that "df -h system" ,it equal 200mb?
P/S :can you upload your logcat ?

Brickpsp said:
yes ,boot with no fail
When boot screen load ,you must wait a little ,after that type "adb logcat"
you can check partition system by commands "adb shell" after that "df -h system" ,it equal 200mb?
P/S :can you upload your logcat ?
Click to expand...
Click to collapse
can i check it in fastboot or recovery somehow? cause i get no adb connection...
but your lk must be presented cause i had cyan text before and now green
EDIT:
Code:
--------- beginning of /dev/log/main
E/logwrapper( 64): executing /system/xbin/run-parts failed: No such file or di
rectory
I/logwrapper( 63): /system/xbin/run-parts terminated by exit(255)
I/DEBUG ( 68): debuggerd: Feb 12 2012 22:51:15
--------- beginning of /dev/log/system
I/Vold ( 66): Vold 2.1 (the revenge) firing up
I/Netd ( 67): Netd 1.0 starting
D/Vold ( 66): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media
)
E/Netd ( 67): Unable to create netlink socket: Protocol not supported
E/Netd ( 67): Unable to open quota2 logging socket
D/Vold ( 66): Volume sdcard state changing 0 (No-Media) -> 1 (Idle-Unmounte
d)
D/AndroidRuntime( 70):
D/AndroidRuntime( 70): >>>>>> AndroidRuntime START com.android.internal.os.Zyg
oteInit <<<<<<
D/AndroidRuntime( 70): CheckJNI is ON
I/ ( 71): ServiceManager: 0xf958
I/AudioFlinger( 71): Loaded primary audio interface from Default audio HW HAL
(audio)
I/AudioFlinger( 71): Using 'Default audio HW HAL' (audio.primary) as the prima
ry audio interface
I/AudioFlinger( 71): Loaded a2dp audio interface from A2DP Audio HW HAL (audio
)
I/CameraService( 71): CameraService started (pid=71)
E/HAL ( 71): load: module=/system/lib/hw/camera.msm7k.so
E/HAL ( 71): Cannot load library: link_image[1936]: 71 could not load n
eeded library 'libcamera.so' for 'camera.msm7k.so' (load_library[1091]: Library
'libcamera.so' not found)
E/CameraService( 71): Could not load camera HAL module
I/AudioFlinger( 71): AudioFlinger's thread 0x10448 ready to run
W/AudioFlinger( 71): Thread AudioOut_1 cannot connect to the power manager ser
vice
W/AudioFlinger( 71): Thread AudioOut_1 cannot connect to the power manager ser
vice
I/AudioPolicyService( 71): Loaded audio policy from LEGACY Audio Policy HAL (a
udio_policy)
D/dalvikvm( 70): DexOpt: --- BEGIN 'core.jar' (bootstrap=1) ---
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/Object;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/Class;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Reference
;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Reference
Queue;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Finalizer
Reference;
D/dalvikvm( 98): DexOpt: load 480ms, verify+opt 6418ms
D/dalvikvm( 70): DexOpt: --- END 'core.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/core.jar': unzip in 1963ms, rewri
te 8280ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'bouncycastle.jar' (bootstrap=1) ---
D/dalvikvm( 114): DexOpt: load 146ms, verify+opt 2201ms
D/dalvikvm( 70): DexOpt: --- END 'bouncycastle.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/bouncycastle.jar': unzip in 475ms
, rewrite 2853ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'ext.jar' (bootstrap=1) ---
D/dalvikvm( 115): DexOpt: load 244ms, verify+opt 3580ms
D/dalvikvm( 70): DexOpt: --- END 'ext.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/ext.jar': unzip in 771ms, rewrite
4489ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'framework.jar' (bootstrap=1) ---
D/dalvikvm( 116): Note: class Landroid/opengl/GLWrapperBase; has 250 unimplemen
ted (abstract) methods
D/dalvikvm( 116): DexOpt: load 2427ms, verify+opt 23013ms
D/dalvikvm( 70): DexOpt: --- END 'framework.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/framework.jar': unzip in 5994ms,
rewrite 29450ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
after that reboot
and the strange is with my boot.img it boots up even in normal speed
here are the changes i merged with zargloubs kernel: https://gitorious.org/~hackun/linux-on-qualcomm-s-msm/hackun-linux-xperia

Elibl said:
can i check it in fastboot or recovery somehow? cause i get no adb connection...
but your lk must be presented cause i had cyan text before and now green
EDIT:
Code:
--------- beginning of /dev/log/main
E/logwrapper( 64): executing /system/xbin/run-parts failed: No such file or di
rectory
I/logwrapper( 63): /system/xbin/run-parts terminated by exit(255)
I/DEBUG ( 68): debuggerd: Feb 12 2012 22:51:15
--------- beginning of /dev/log/system
I/Vold ( 66): Vold 2.1 (the revenge) firing up
I/Netd ( 67): Netd 1.0 starting
D/Vold ( 66): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media
)
E/Netd ( 67): Unable to create netlink socket: Protocol not supported
E/Netd ( 67): Unable to open quota2 logging socket
D/Vold ( 66): Volume sdcard state changing 0 (No-Media) -> 1 (Idle-Unmounte
d)
D/AndroidRuntime( 70):
D/AndroidRuntime( 70): >>>>>> AndroidRuntime START com.android.internal.os.Zyg
oteInit <<<<<<
D/AndroidRuntime( 70): CheckJNI is ON
I/ ( 71): ServiceManager: 0xf958
I/AudioFlinger( 71): Loaded primary audio interface from Default audio HW HAL
(audio)
I/AudioFlinger( 71): Using 'Default audio HW HAL' (audio.primary) as the prima
ry audio interface
I/AudioFlinger( 71): Loaded a2dp audio interface from A2DP Audio HW HAL (audio
)
I/CameraService( 71): CameraService started (pid=71)
E/HAL ( 71): load: module=/system/lib/hw/camera.msm7k.so
E/HAL ( 71): Cannot load library: link_image[1936]: 71 could not load n
eeded library 'libcamera.so' for 'camera.msm7k.so' (load_library[1091]: Library
'libcamera.so' not found)
E/CameraService( 71): Could not load camera HAL module
I/AudioFlinger( 71): AudioFlinger's thread 0x10448 ready to run
W/AudioFlinger( 71): Thread AudioOut_1 cannot connect to the power manager ser
vice
W/AudioFlinger( 71): Thread AudioOut_1 cannot connect to the power manager ser
vice
I/AudioPolicyService( 71): Loaded audio policy from LEGACY Audio Policy HAL (a
udio_policy)
D/dalvikvm( 70): DexOpt: --- BEGIN 'core.jar' (bootstrap=1) ---
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/Object;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/Class;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Reference
;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Reference
Queue;
D/dalvikvm( 98): Ignoring duplicate verify attempt on Ljava/lang/ref/Finalizer
Reference;
D/dalvikvm( 98): DexOpt: load 480ms, verify+opt 6418ms
D/dalvikvm( 70): DexOpt: --- END 'core.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/core.jar': unzip in 1963ms, rewri
te 8280ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'bouncycastle.jar' (bootstrap=1) ---
D/dalvikvm( 114): DexOpt: load 146ms, verify+opt 2201ms
D/dalvikvm( 70): DexOpt: --- END 'bouncycastle.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/bouncycastle.jar': unzip in 475ms
, rewrite 2853ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'ext.jar' (bootstrap=1) ---
D/dalvikvm( 115): DexOpt: load 244ms, verify+opt 3580ms
D/dalvikvm( 70): DexOpt: --- END 'ext.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/ext.jar': unzip in 771ms, rewrite
4489ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'framework.jar' (bootstrap=1) ---
D/dalvikvm( 116): Note: class Landroid/opengl/GLWrapperBase; has 250 unimplemen
ted (abstract) methods
D/dalvikvm( 116): DexOpt: load 2427ms, verify+opt 23013ms
D/dalvikvm( 70): DexOpt: --- END 'framework.jar' (success) ---
D/dalvikvm( 70): DEX prep '/system/framework/framework.jar': unzip in 5994ms,
rewrite 29450ms
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
after that reboot
and the strange is with my boot.img it boots up even in normal speed
here are the changes i merged with zargloubs kernel: https://gitorious.org/~hackun/linux-on-qualcomm-s-msm/hackun-linux-xperia
Click to expand...
Click to collapse
yes ,my friend compile lk in https://www.gitorious.org/lk-msm7200a-htc-wince/lk-msm7200a-htc-wince ,maybe it old version
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
This is just start unzip framework, if error happen, system will show error and loop , i don't know why your device is reboot
your boot.img reboot,too ?

Brickpsp said:
yes ,my friend compile lk in https://www.gitorious.org/lk-msm7200a-htc-wince/lk-msm7200a-htc-wince ,maybe it old version
D/dalvikvm( 70): DexOpt: --- BEGIN 'android.policy.jar' (bootstrap=1) ---
This is just start unzip framework, if error happen, system will show error and loop , i don't know why your device is reboot
your boot.img reboot,too ?
Click to expand...
Click to collapse
no

Elibl said:
no
Click to expand...
Click to collapse
so you booted into android?

Elibl said:
i tried a kernel i built from a combination of zargloub's and hackun's repo with this i got to the pin request but screen was corrupted and flashing between terminal lines and boot animation / ics pin request...
Click to expand...
Click to collapse
but the screen is nearly unreadable... touch worked also i looked a bit around in ics and after some time reboot to boot animation (no full reboot)