Related
hello i recently tried flashing my cingular 8125 with the crossbow rom and went all good until it stopped at 96% were i got a error and was instructed to recover bla bla. the bootloader was recovered and it still connects to my computer with usb...but ever time i try to restart the rom flasher i get ether a 300 error wrong updater or a 274 error comunications. i have looked and looked but cant find anything on what to do. if you have any info that could be of help it would be GREATLY apreciated. thanks in advance.
ps. sry if i did something wrong....first post...
Is your device a G3 or G4?
You probably need to flash an official rom again (Try the T-Mobile one, if that works then you are CID unlocked. If it doesn't then flash the Cingular one and then do the CID Unlock again _IF_ this is a G3).
If neither of those work, download the Wizard Love ROM (Search on PirateBay for Wizard_Love) and try flashing it, and then downgrading and CID Unlocking from it.
Good luck
8125
umm im pretty sure its a G3, i went by the thing on this website that says if it has xx 2 zeros then its G3 and xxx 3 zeros G4.
umm ive tried the offical HTC 8125 update but it doesnt work ether...is it the same as the cingular one?
im downloading the tmobile one right now ill let you know how it turns out.
thanks again for the help its greatly aprecated
jug6ernaut said:
umm im pretty sure its a G3, i went by the thing on this website that says if it has xx 2 zeros then its G3 and xxx 3 zeros G4.
Click to expand...
Click to collapse
If you don't see .0001 (or something like that) then you are a G3. But it sure helps when people give us full details, otherwise we are just guessing (and guessing can lead to a bricked phone because we don't have the full picture).
umm ive tried the offical HTC 8125 update but it doesnt work ether...is it the same as the cingular one?
Click to expand...
Click to collapse
As long as its this one:
http://www.america.htc.com/support/8125/software-downloads.html
But HOW does it not work? What errors do you get, or what happens? Does your phone boot up into Windows? If so, what is the IPL and SPL now showing?
im downloading the tmobile one right now ill let you know how it turns out.
Click to expand...
Click to collapse
Give it a try, but if you can't get the official Cingular one to install, I doubt the TMobile one will flash either.
8125
ummmm ya....i tried the t-mobile one...and nothing...twice....and i couldnt find the wizard one....so out of desperation(even though it failed like 20 times i tried the HTC one again...)....and it worked!!! idk how...but it did....lol...its now updated.....and i dont think im going to change it any more...
hey thanks for all your help....i seriously was already looking for a 8525 on ebay...lol...but ya thanks!
jug6ernaut said:
ummmm ya....i tried the t-mobile one...and nothing...twice....and i couldnt find the wizard one....so out of desperation(even though it failed like 20 times i tried the HTC one again...)....and it worked!!! idk how...but it did....lol...its now updated.....and i dont think im going to change it any more...
hey thanks for all your help....i seriously was already looking for a 8525 on ebay...lol...but ya thanks!
Click to expand...
Click to collapse
A suggestion is to remove Storage Card when flashing, I've personally had issues with that. And if the flash fails, reboot the PC and try again. Deleting Windows temp files and a CHKDSK are also very helpful.
Hey im new to these forums and just need help unlocking my Cingualr 8125 or put a different Rom liek the xda windows mobile 6.0. Im folowing the steps but like when i open "ROMupdateutility.exe" I follow the steps and when it starts my 8125 goes to like bootmode? It has 3 colors on the screen
red greedn and blue and then on the ROMUPDate utlity i got error 300...i tryed like so many times i need help thnx =[
EDIT : the error says error 300 invalid update tool.... "This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade." where do i get the correct RUU then?...
Also found out that its a G4 because of the Ip number or w/e because it has 3 zeros then a 1 for example .0001
[Help] Unlocking Cingular 8125
Hey im new to these forums and i need help unlocking my Cingular 8125
From what ive seen on these forums my phone is G4 Because it has xxx1 at the end of the ip or w/e that **** is. I would gladly appreciate it if someone would help me unlock my G4.One of my friends has his unlocked it looks like Vista and it has all these sweet programs. Since i just got mine its g4 I guess..and since he got him like 2 months bevfore me maybe his was g3 so it was easy...
This is probably why so many people flame noobs. cause of questions like this. If you have any sort of I.Q in you you would have checked this link out http://forum.xda-developers.com/showthread.php?t=293480 its the very first post. good luck
deviusdragger said:
This is probably why so many people flame noobs. cause of questions like this. If you have any sort of I.Q in you you would have checked this link out http://forum.xda-developers.com/showthread.php?t=293480 its the very first post. good luck
Click to expand...
Click to collapse
Noob, i already checked that one. Its stickied why wouldnt i not check it before posting this thread?
The link's on that Thread are dead. They dont work anymore ***. Lol
Can't we all just get along? Let's keep things nice-nice, okay?
Anyhow, chaos36 it's really important to read up on this site before posting. All the answers are readily available (with some time and patience).
Here's a quick guideline ...
1. Your first stop should be here (the wiki)
All the information and links to get the most out of your device
2. How to SIM unlock your phone, look here.
3. How to flash any ROM other than your carrier's, here
4. Enjoy!
But just a bit of friendly advice for you in the future. Read and search all you can, then if you can't find what you're looking for, read and search some more before posting.
This site is a great place for developers, hobbyists, and enthusiasts. It's not a "helpdesk". But as long as you help yourself first, you'll find a lot of great (nice) people that will help you along your way.
Good luck and have fun!
http://forum.xda-developers.com/showthread.php?t=293480
Thnx..i ****ed up when i turn on my 8125 it stays at cingular raising the bar witht he ipl and spl number -.- please hel and ty.
chaos36 said:
Thnx..i ****ed up when i turn on my 8125 it stays at cingular raising the bar witht he ipl and spl number -.- please hel and ty.
Click to expand...
Click to collapse
Can you still get into the bootloader screen? (the red/blue/green screen)
To get into the bootloader you need to HOLD the camera button and tap the reset button.
Yes im in that screen right now if you mean the screen thtat has 3 stips a red then green then blue?
Now what do i do when im there?
chaos36 said:
Yes im in that screen right now if you mean the screen thtat has 3 stips a red then green then blue
Click to expand...
Click to collapse
Alright, this is a good example (one that we've all seen over and over again here) of how not to jump into flashing your phone without reading everything thoroughly.
Stay in the bootloader screen, keep your USB cord plugged in and reflash your original carrier's ROM. That will get you back to factory specs.
Then, don't try flashing anything else UNTIL you read everything I mentioned in the previous post first, at least a couple times through.
Just some advice
TaurusBullba said:
Alright, this is a good example (one that we've all seen over and over again here) of how not to jump into flashing your phone without reading everything thoroughly.
Stay in the bootloader screen, keep your USB cord plugged in and reflash your original carrier's ROM. That will get you back to factory specs.
Then, don't try flashing anything else UNTIL you read everything I mentioned in the previous post first, at least a couple times through.
Just some advice
Click to expand...
Click to collapse
How do i reflash the original carriers ROM?
And thank you for helping me out.
[Do you got AIM would be much easier and qicker to discuss thiss.]
chaos36 said:
How do i reflash the original carriers ROM?
And thank you for helping me out.
Click to expand...
Click to collapse
Well, glad to help. To reflash your original carriers ROM, you need to download it from their website and execute it.
Ok i got a cingular 8125. So to download it i go to Cingualr.com?...Sorry for being so noob and do you got AIm will be much easier for you to help me there ty.
I'm actually about to hit the sack. But you can get the Cingular ROM here. Just download and install it and you'll be good.
Good luck!
Wow you gave me a direct link. Thank you for all your help! Do you got AIM incase i cant figure out how to do this? maybe u can help me out tomorrow thnx for all your time and help.
Taurus pretty much held your hand and walked you thru it. You should be fine after this point. And if some of the links arent working, just let some of the mods now and they will take care of all that stuff. So good luck with the flashing.
deviusdragger said:
Taurus pretty much held your hand and walked you thru it. You should be fine after this point. And if some of the links arent working, just let some of the mods now and they will take care of all that stuff. So good luck with the flashing.
Click to expand...
Click to collapse
Yes he did and it was nice of him for doing that to me. My 8125 is fine now..but the link you gave me for the flash's are dead the links dont work =[
i use jump spl 1.93
after that,i forgot to flash with hardspl 3.29
instead,i went straight to try to flash a new rom
now it stuck triclor screen...
can anyone help me?
Er, you did what??
Have you done HardSPL at all yet? Even V1?
Is your device security unlocked? If so Franken Kaiser might help you. http://forum.xda-developers.com/showthread.php?t=394584&highlight=frankenkaiser
If not find a Mod called GSLEON3 and buy him a beer.
Sorry GSLEON3, I'm sending another bricked device your way
Dave
i fixed it!!!
sumhow thank god...
first i make a hard reset
then i enabled USB connection(previously when im trying to install hardspl 3.29,i was asked to disabled it)
then i try to run kaiser hard spl 3.29 again
rom updating work continue without being stucked on tri screen color!!!
thank god,im so happy
alhamdulillah
n yeah,i have hardspl v1 before that accident happen
Congrats.
And thanks for sharing your process of fixing it.
Dave
Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila
I actually tried few times yesterday and today, but I am getting "Server is down" message .
i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)
Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.
fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
i did it with the first attempt with v3, no problem and i'm really happy
Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.
for me dont work the hard spl....
I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?
fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you
no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)
the link is dead!!
lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works
keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.
Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model
Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.
it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK
ok i had a hermes and i unlocked and flashed perfect. npw i have a kaiser tilt and i cant do anything. i did put hard spl 3.29 on it but i cant flash any rom. i have a win 6.1 rom on it and im using radio 1.65.21. can someone please help me. Im not a noob but i do need some help lol.
What problem are you having? What error? In order to get help we need more info!
error 260 ima try it on another pc but yeah its error 260
On which step? I mean geez, can you not elaborate to help people help you. You are giving us nothing at all to work with.