Related
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
try downgrade your RADIO to 1.13
I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse
Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?
i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps
At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then
here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207
Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse
Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse
OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?
hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi
OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)
No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
I just got my Moto s9's and the sound is great. One problem i have though is that i hear a LOT of static when the sound is high. How can i fix this? Second thing is what are the best registry edits combos that work for the loudest and clearest sound for listening to audio and talking through them?
I also realized that when i press the right button, it pops up the speech recognition thing and i want it to pop up voice command, is it possible? Thanks a lot.
edit: there is also a lot of skipping.
????
I here that sound too.......now that you said something I'm not crazy....I wish there is a fix .....my S9 are awsome
skipping chang the bit pool to a lower setting...
Great, thank you. now i have another problem, i can't get it to reconnect after it's idle! the only thing that works is the voice thingy and that's it. no music, no calls, no nothing. this happened after i installed the a2dp fix.
Nvm, i got the skipping worked (thanks mike!) now i have the static sound on my TIlt and it's horrible, on my 8525 it's PERFECT. i also can't get voice command to come on instead of the voice recognition thingy. so any help would be great, thanks.
also, i can't get them to work on my pc, i have the widcomm drivers but they would connect and then disconnect, any ideas?
hello
ok.....the noise that you get from the headset can be fixed try to 1) delete your H9's from device and repair them to your phone...pretend you just got them and your pairing them for the first time...see if that works....2) uninstall your AD2P fix......sometimes putting a fix cab or a zip file and unzipping it and applying it to your phone screws up yor phone's ability to run properly 3) how long ago did you get your H9's.....if you can return them or exchange them do so.
just a thought ....I put many rom's on my phone and they are awsome..BUT.....I've come to a understanding ...I had to replace my tilt once because I THINK it couldn't take the flashing.....You know what I did .....everything looks the same, like I flashed my rom ...but I didn't, all I installed we're cab file NO FLASHING OF ROM and my phone has run fine since then...I mean everything.....I'm not saying not to change your rom ...you can, but everything now latey, things come in cab format.....also uninstall and reinstall voice command.....then soft reset....my voice command over rides voice dial .........private msg me and if you want we can talk over these phone problems by e-mail or live person to person over our cell phones that's is fine with me
peace
mike
mike19722 said:
ok.....the noise that you get from the headset can be fixed try to 1) delete your H9's from device and repair them to your phone...pretend you just got them and your pairing them for the first time...see if that works....2) uninstall your AD2P fix......sometimes putting a fix cab or a zip file and unzipping it and applying it to your phone screws up yor phone's ability to run properly 3) how long ago did you get your H9's.....if you can return them or exchange them do so.
just a thought ....I put many rom's on my phone and they are awsome..BUT.....I've come to a understanding ...I had to replace my tilt once because I THINK it couldn't take the flashing.....You know what I did .....everything looks the same, like I flashed my rom ...but I didn't, all I installed we're cab file NO FLASHING OF ROM and my phone has run fine since then...I mean everything.....I'm not saying not to change your rom ...you can, but everything now latey, things come in cab format.....also uninstall and reinstall voice command.....then soft reset....my voice command over rides voice dial .........private msg me and if you want we can talk over these phone problems by e-mail or live person to person over our cell phones that's is fine with me
peace
mike
Click to expand...
Click to collapse
Great, thanks a lot. I got the s9's a few days ago and love them. I'm trying to get voice command now to work on them through the mic but i can't for some reason. I also want them to work on my PC and have the widcomm stack, any ideas on that? If you have AIM, then i can talk there or msn or yahoo. If none, email's fine.
HI all,
I have setup MS Voice command on my Fuze to announce the name or phone number of the person calling on in coming calls. On my Tilt, it would announce the name either thru the speaker or my BT headset. With the Fuze, it will not. Is anyone else having this problem.
Also, with my Tilt, my ring tones would play thru my BT Headset and it will not on the Fuze. I don't know if this are related. I am using the BT headset on both.
Thanks
billf.
Yes, I'm having this same problem, and it is making me consider returning my Fuze and sticking with my tilt. Unless HTC or someone comes up with a fix within the next 2 weeks, my Fuze is going back. The only other bug I have noticed is that auto-correct does NOT work for the keyboard. It's supposed to automatically add in apostrophes for words, such as "can't, don't, won't" etc. Also, the word suggestion never shows up when I type, like it did on my Tilt. Of course it gives you suggestions with T9 turned on, but that's not the same as word suggestion. It would provide suggestions based on previous typing habits, and even predict entire phrases it thought I was going to type. Anyway....if someone figures out how to fix these problems, please let me know ASAP! Thanks.
I just noticed this tread. I too am having the same problem with it not announcing. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
starstreak said:
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
Click to expand...
Click to collapse
That is the way I have it set up. No go. What is weird is that my ring tone plays over the bluetooth headset, but the computer generated voice doesn't speak.
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
venelar said:
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
Click to expand...
Click to collapse
I'm glad that you decided to be a "guinea pig!" Because I was going to try this today! I was going to re-install the .CAB that came from my Tilt. But I'm glad to see if that doesn't work. In order to find a solution, do you think I should call AT&T or HTC? Which one would give me the solution? Because I only have 25 days left before my Fuze is non-returnable.
Hmm I never tried it yet on the fuze with my BT. I'll try it and report back.
Ok crap. Yeah. It doesnt "voice" announce. I never noticed it because I can dial from headset and even number dial from headset and it'll work. I can hear it repeating the number back.
BUT its not like its not working... If I remove the announce incommming calls, it makes my phone ring, but in my earpiece I hear a tone to tell me I have a phonecall. When I enable announce incomming calls, my phone vibrates and I hear my ringtone in my ear, and faintly I can hear that "tone" I heard before. So it sounds like the voice side of things isnt working.
Ok tried one last thing before my BT headset died. Doh!
When it died, my phone announced the caller. So it does work. Its just not working from the BT headset, you hear a bell sound or something.
Also, I just noticed my cars BT doesn't show battery of the phone. When my Tilt was on the car BT, it would show the battery remaining.
MS Voice Command
Check out the MS Voice Command guide on WinMo-Experts. There might be an answer to your problems in there.
http://www.winmo-experts.com/viewtopic.php?f=11&t=2
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
starstreak said:
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
Click to expand...
Click to collapse
Guess I didn't notice, but dose not work for me either. I do enjoy that on the Tilt, but I more like the Tilt for the message and email voice notification.
Beahcboyde/JON
PS. I'm simply not keeping the Fuze. I'll stick with my Tilt and TF2. love the whole setup and the speed of the touchflo usingHyperDragon Raphael
Signal is average compaired to my Tilt, when testing out T-Mobile connection. On 3G, I'm constantly around 2 bars(but it spurts to full so I know its working) So I think Hawaii is still bad with 3G is some areas.
I use VC ALOT. So I'm amazed I never noticed this issue where it wont say the caller in my ear.
I'm not sure if I'll keep the phone/drop ATT/both.
Please someone fix this! I dunno if it helps, but all you hear is a bell sound in the background of your normal phone ringtone. I know thats from the MSVC. The only thing not working is the announcement of whos calling. I think everything else is working. I can voice dial,recieve calender announcements and appoinments,etc from my BT headset.
Oh, not just BT headset. It won't announce it from the phone either.
I even did a "bloat free" installation.
the fix is on pdaphonehome.com i had the same problem with my sprint touch pro. weird since the diamond doesn't have this problem. you have to edit the registry to use the wav file instead of the default. only side effect with the fix is the phone will ring once and VC will announce the rest of the duration.
sid
Eww,junk fix. I'll check it out tho. While not a problem when I have my headset, it would be if i had my phone sitting on a table.
Reg hack
I copied this from pdaphonehome.com....kuddos to the person that figured this
out. Kind of a hacky way to get it to work though. Perhaps the brains around
here can figure it out.
--------------------------------paste-------------------------------
This isn't a complete solution - but it's an improvement.
With this fix - the ring tone will play for a second and then be cut off by the call announcement. The announcement will be at a lower volume. The announcement will repeat - the ring tone will not be played again.
NOTE THAT YOU SHOULD ATTEMPT THIS FIX ONLY IF YOU ARE COMFORTABLE IN UPDATING YOUR REGISTRY.
Change the following registry keys:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
change from VoiceCommand1 to Ring
HKCU\ControlPanel\Sounds\TTSAnnounce\Script
change from as5p to v0p (that's v-zero-p) - for vibrate & ring, or p (ring only)
The above fix seems to get the announcements reliably, and doesn't break the set vibrate/set ringer features in the TF3D interface.
Hopefully we can find a better solution - that will restore the full functionality of Voice Command incoming call announcements - and not need this hack.
Another option is to manually overwrite the ringtone file name:
HKCU\ControlPanel\Sounds\RingTone0\Sound
change to \Application Data\Volatile\TTSCallerID.wav
This fix replaces the ringtone with the call announcement - and at full volume.
BUT this solution has several problems, including breaking the set vibrate/set ringer feature in TF3D.
From reading that, if I DON'T use the TF3D ring/vibrate, but use the windows mobile one, I should be fine by doing the second hack listed above? I think I could live with that as I eventually will kill the TF3D just so I can get the calender of my Pocket Informant to show instead. Only thing I like was the Weather and clock of the TF3D anyways and ATT crippled the clock by removing the animation.
Doe anybody know how to do the 2nd option? Not sure if I'm supposed to delete the whole registry line or somehow add to that line?
Hi
When in a call i am not able to hear any sound. Then when i switch it to speakerphone it works fine.
I thought my speaker are not working i changed my speakers. But the problem still there.
lookig for a solution
Thanx in advance
I'm having the same problem
Ringtone is fine, speakerphone is fine.
I have the same issue, it happened suddenly when i was in a call when i stopped listening to te call, so i had to switch to speaker.I did hard reset , changed rom nothing happened.When i call myself i can hear the busy tone, but when i call someone nothing happens!!!Any ideas???
Hello
I have the same problem as you.
you have tried to use a usb handsfree?
I'm too make a hard reset, but work only a few hours.
I try to use android, but the same result, in audio calls i'm not listen nothing.
i'm a fuze with wm 6.5 and energy rom
more information
os version 5.2.23080
manila version 2.1.38680.0 vga
rom version 25.oct.2009
same problem here
can anyone give me a solution because I am out of warantee. repair it? if yes how to repair it? or to buy any other mobile is best?
i am out of warantee too...the only solution i found is by using speaker and reduce the volume so that i don't get deaf...
you have tried to change the rom??
and the radio?
Hello
excuse me for my bad english first, i probe to change my rom from energy rom to romeo2 3.0.1, and change the radio for 1.11.25.01, and that works in my case. I have one day half with the new change and i don't any trouble with the call phones. I change too the AudioPara3csv for the better sound in the mobile and all the stuffs works fine.
Regards
anyone found any solution?i tried many roms but nothing happened, maybe hardware issue?
where can i find this romeo rom;i used search but nothing was found...
Have u tried a different radio for your diamond? When i had that prob with my Kaiser that solved the problem
In Raphael Roms, you should found it
ttherapon said:
where can i find this romeo rom;i used search but nothing was found...
Click to expand...
Click to collapse
sry, but i cant find the roms, have the same Problem and i dont know wich is the right rom ?