Related
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Does voice command come with WM6 or is it something you have to add to the Kaiser yourself? Anyone have any opinions, good or bad, about its functionality?
You have to purchase and install it yourself...
And then you have to make some minor tweaks.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=333260
Is voice dialing working?
e.g., are commands/prompts routed to/from the headset (rather than thru the Kaiser's speakers like on the Hermes)?
Would love to know if the hacks can be avoided and if the product finally works as advertised...
My experience is that yes - the commands and prompts are indeed routed to my BT headset... However, I think a few folks have had other experiences for some reason..
It works for me though - without registry hacks.
goestoeleven said:
e.g., are commands/prompts routed to/from the headset (rather than thru the Kaiser's speakers like on the Hermes)?
Would love to know if the hacks can be avoided and if the product finally works as advertised...
Click to expand...
Click to collapse
It works if you have the Microsoft Bluetooth stack (most HTC devices, if not all). Doesn't work if you dont (Blackjack, for example).
i installed MS VC 1.6...and it will give name over headset.....
gnafin said:
i installed MS VC 1.6...and it will give name over headset.....
Click to expand...
Click to collapse
which version are you using mines doesnt announce over headset
duttythroy said:
which version are you using mines doesnt announce over headset
Click to expand...
Click to collapse
Same question here. Had to do this tweak to get it going.
did not work for me.....
anybody knows how to adjust the speed to the notification being read. female voice is just too fast when reading sms messages.
i just installed ms voice command on my att tilt and the sms and emails do not readout. i have all the settings set like my friends dash and it still does not work like his. his dash has WM6.
Mine works... so far.
I am not having any problems with the Tilt and original rom. But I am also using a BT stereo headset. I wonder how much that makes a difference. I will test some more and try and post the results.
i can use voice commands to access programs and make calls. it wont read out my sms or email. i tried using my wired headset and nothing. my BT is charging. i'll try it later.
sqadan said:
You have to purchase and install it yourself...
And then you have to make some minor tweaks.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=333260
Click to expand...
Click to collapse
OK, this is really getting me frustrated. I had VC working fine on my 8525, but can't seem to get it to work on the Tilt. I don't have that registry key in the registry. All I have is: HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand and it's empty.
What is really driving me crazy is that I had used VC1.6BTFix.CAB fix when I first got my Tilt and could have sworn it worked, but a few days latter, it no longer worked and nothing (not even a hard reset) will fix it. When I do install that fix, I do get a path setting under the above key, but it's to a different app. Changing it to Voicecmd.exe doesn't fix it either.
Does anyone have any ideas?
Thanks,
jglev said:
OK, this is really getting me frustrated. I had VC working fine on my 8525, but can't seem to get it to work on the Tilt. I don't have that registry key in the registry. All I have is: HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand and it's empty.
What is really driving me crazy is that I had used VC1.6BTFix.CAB fix when I first got my Tilt and could have sworn it worked, but a few days latter, it no longer worked and nothing (not even a hard reset) will fix it. When I do install that fix, I do get a path setting under the above key, but it's to a different app. Changing it to Voicecmd.exe doesn't fix it either.
Does anyone have any ideas?
Thanks,
Click to expand...
Click to collapse
Jeff,
This is what I have done in the past with my 8525 and that registry key and it might work for you. Change the path to end with "VoiceCommand.exe" instead of "Voicecmd.exe." If I remember correctly, both programs are in that directory.
Give that a shot.
Brad
Park City said:
Jeff,
This is what I have done in the past with my 8525 and that registry key and it might work for you. Change the path to end with "VoiceCommand.exe" instead of "Voicecmd.exe." If I remember correctly, both programs are in that directory.
Give that a shot.
Brad
Click to expand...
Click to collapse
Thanks Brad. I read here that people have gotten it to work just by installing it on the Tilt with no hacks or registry edits, so I disabled the BTfix program, uninstalled it, rebooted and the darn thing works! I never tried it right out of the box since it was known that it didn't work on the 8525. I just assumed that it wouldn't work unaltered on the Tilt, but it does.
This relates to the problem of the speakerphone being virtually unusable on the ATT tilt. I was having the problem that seems to be very common with the speakerphone cutting in and out almost as if it were half duplex. The other party could only hear every other word and it was virtually unusable. Additionally, I could not get the speakerphone to work with Skype at all. All of my searches led to a dead end with nobody able to figure out how to fix this. There was one poster that said the problem was fixed by installing MS Voice Command, though no one else was able to repeat that.
Anyways, I decided to try MS Voice Command. I installed it and really did not like it. It was less accurate than Cyberon Voice speed dial. The digitized voice was very difficult to understand. I also had difficulty getting it to work with my BT headset. Other than that it was pretty nice not to have to work through voice tags. But I really did prefer CVSD so I went about uninstalling MSVC and resetting all the registry changes I had made. Unfortunately, this did not revive CVSD. I then found the cab to reinstall it. It still didn't work. I uninstalled and reinstalled CVSD. No go. I then found a patch cab to restore the registry settings. That sort of worked and I was able to use CVSD but it did not have the usual beep sound to let you know when to speak the command. Anyways, I did some further research and was directed to the Cyberon web site, where there was a patch to upgrade to the latest version. Finally got it all back to working status! That was two days ago.
Today, I was messing around with Skype and did a test call to the echo number and sure enough it heard me through the speakerphone! It repeated my test message very clearly. I then made a Skype call and the other party heard me loud and clear. This was a good sign... Lastly, I made a regular phone call and put the call on speaker. Unbelievably, the speakerphone was now fully operational! I could be heard loud and clear, no breaking up as before. The quality, I was told was not the greatest, sounding like I was on a speakerphone, but was coming in perfectly clear and no half duplex like behavior! Problem fixed!
So, although I can't tell you exactly what fixed the problem, this episode points to some sort of conflict with CVSD. Or to the older version of it. I would think that anyone with the speakerphone problem should first try upgrading to the latest version of CVSD with this patch located on the Cyberon site.
http://www.cyberon.com.tw/Technical3.php
If that doesn't fix it, then you might want to uninstall CVSD altogether, then reinstall and apply then apply the patch. As I said, I'm not sure exactly where the problem got corrected, but this is clearly what fixed it for me! It would be interesting to know if others have the same results...
Here is the cab to re-install CVSD (Voice_Tri.cab) and the registry patch (CVSD_Patch.cab) should you decide to do a complete uninstall/reinstall. The last update cab you can get directly from Cyberon site mentioned in post #1.
I hope this helps...
bigboyhf said:
Here is the cab to re-install CVSD (Voice_Tri.cab) and the registry patch (CVSD_Patch.cab) should you decide to do a complete uninstall/reinstall. The last update cab you can get directly from Cyberon site mentioned in post #1.
I hope this helps...
Click to expand...
Click to collapse
Has someone else tried this with any success yet?
loudspeaker mic problem
I tried installing the applications from cyberone and then installing the patch.
SAME PROBLEM......
Help please........
Did you delete CVSD first then reinstall?? Or did you just install the new version over the old? As I said originally, I'm not sure what actually got fixed, only that it did get fixed after doing this... I was hoping that it could be replicated by someone else or that we could figure out just what it was that was causing the problem in the first place!
kick....bump
Imperium said:
kick....bump
Click to expand...
Click to collapse
huh, for what reason??????????
thesire said:
huh, for what reason??????????
Click to expand...
Click to collapse
So that it doesnt get flooded and lost with the new threads being made every day. therefore i assume that someone will see it, and has the same problem and installs the above remedy and the reads Moddin's post: Has someone else tried this with any success yet?
then he remembers that it worked for him therefore posting back and confirming that it actually works.
hence why imperium wrote: kick.....bump.
then imperium sees there is a new comment and seeing that it worked for the other guy, he decides to take the plunge and maybe it works for him too.
he then goes and talks on the phone happily ever after.
hope this answered your question.
hi,
You can call me noob, how to delete CVSD?
I am pretty sure I installed it first from the cab and then it was in the uninstall list. I had removed/changed a bunch of settings in the registry when I tried to get Voice Command working so I did the install. When it didn't work I uninstalled then reinstalled and then did the patch which got me pretty close to being fully operational. The last thing I did was update directly from the Cyberon web site.
I'm using a TyTN II but I find that my unit has Cyberon Voice Commander instead of Cyberon Voice Speed Dial. Does this patch work with the CVC?
CVSD is only uninstalled if you have it installed to begin with. Go to start, settings, system tab, remove programs. It should be on that list. I'm going to try this right now. My girlfriend hangs up on me whenever I talk on speaker phone because she can't hear what I'm saying and gets frustrated. This could potentially ruin relationships and marriages!!
so this fix is only for TyTN II's which has CVSD installed? Does not apply to mine then. I thought all bundled software is standard. Anyways, do update us when you're done! Yesterday I tried disabling the Microphone AGC and it sort of improved the speaker phone a lot.
Hi:
The only link which will work for me on the Cyberon page is:
Cyberon Voice Speed Dial bluetooth headset connection problem
Q : The Bluetooth recognition performance is poor on HTC P3300. What can I do to solve this problem?
A : This problem could be fixed by the update Cyberon Voice Speed Dial Patch. Please following the instruction in the Readme file and install the Patch.
Download update patch <----------------------
Is this the correct patch that was mentioned?
If not, could someone please attach it here?
Also, I have Voice Speed Dial on my Tilt, but it is not listed on the remove programs list. Can I simply install the newer version without having first uninstalled the older version?
Thanks!
If you are trying to fix your speakerphone I recommend following the instructions in the first two posts. The patch is in post 2...
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
holding....
holding....
you write with brilliance
I'm happy somebody made this thread good work.
Fantastic Article Bengalih!
One added request. It would be great to include, perhaps in a text attachment, ms voice command's list of progam files and registry entries.
Seperate by the two primary versions for 1.6.
The information would invaluable for cooks to go back into a clean rom and clean out left over files and registry entries or allow them to strip the full version out if they wish to upgrade it or leave it out entirely.
Left over files/reg entries may as you know cause issues when adding or upgrading the ms voice.
Tayton said:
Fantastic Article Bengalih!
....
Click to expand...
Click to collapse
Added to guide.
List of File and Registry Entries for Voice Command
place holder
Cancel VC announcement while In progress?
Bengalih, Great write up!
Is there a way that you know of to cancel VC's announcement mid stream? That is to say, there are times when VC will start to announce an email, or read SMS while I am on a call and I would like a way to shut it up quickly. It is terrible when you are on the phone with client A and your phone starts to announce a call from client B, or even worse sitting quietly on a conference call and it starts reading an SMS... Some how this always bleeds through my BT headset so the person I am on the phone with hears it.
Thanks!
crussell
crussell said:
Bengalih, Great write up!
Is there a way that you know of to cancel VC's announcement mid stream? That is to say, there are times when VC will start to announce an email, or read SMS while I am on a call and I would like a way to shut it up quickly. It is terrible when you are on the phone with client A and your phone starts to announce a call from client B, or even worse sitting quietly on a conference call and it starts reading an SMS... Some how this always bleeds through my BT headset so the person I am on the phone with hears it.
Click to expand...
Click to collapse
crussell. Thanks for the vote of support. Unfortunately the issue you describe plagues me as well. I don't think there is anything wrong with the software and by this I mean it isn't a bug, just something the developers didn't think through very well.
There are only two ways to stop the incoming announcements:
Turn them off
Check the box in Notifications that says "Only during free time"
What this box means is that if you have an appointment in your calendar that sets your free/busy disposition to "busy" then announcements will not come through.
However, if you get an incoming call you will still get the call waiting beeps which can be just as distracting (if anyone knows how to turn these off please let me know...they are unrelated to MSVC).
So, if you know you are going to be on an important call you can first go into your calendar and make an appointment and set your time to busy.
The only solution I can see, short of a new version which takes these things into account is if someone can figure out how to fool the system into thinking your time is "busy". I don't know if MSVC looks for a registry flag or if there is a free/busy connector (API) that it taps into. If someone could make a little app that would toggle free/busy time that would be fantastic. Unfortunately I cannot code for WM to this degree.
AHA!
I take back what I said...at least the part of me not knowing how to fix it
There does indeed appear to be a registry location that records your current free/busy status.
I have written another script tool which will perform a toggle of your free/busy status effectively turning off any incoming announcements when toggled off.
Check it out here
ROM: 1.62.502.0 (ATT Tilt Shipped ROM)
MSVC Version: 1.6.17913
Bluetooth Headset: Motorola 89199N
Description:
Sorry if this is the wrong place to post this, but I've stopped using MSVC on my Tilt via Bluetooth because 3 of 3 times I've messed with this (getting battery status, call person, etc type commands) I've found later that the phone won't dial out or receive calls anymore! First two times it happened I was a bit puzzled, but the third time it clicked that it only happened sometime after initiating a call or such via MSVC with Bluetooth.
Anyone else noticed this? I find it odd that it'd freeze up the phone portion of the Tilt, but it does 100% of the time for me. IIRC, hitting the Green button shows the Phone titlebar and menus but the screen itself never draws. I can hit the OK button to get back to the Today screen, and the Phone app is listed in the list of applications running I believe, but it won't die and won't work until I do a reset.
I installed MSVC from a CAB here on this forum, and it generally works but this problem with bluetooth is pretty annoying as the main reason I wanted to get the program is to do bluetooth commands for dialing.
The more I think about it, it's possible that using the bluetooth commands then doing "run command suspend" (I think that's the syntax, it's been a few weeks since I tried it last) to turn off the Tilt immediately might also cause it problems. I was doing that because otherwise it stays on for quite a while, when it seems to me it should turn itself off fairly quickly.
I'll try your new version and edit-back
I have never experienced this issue with MSVC. I have tried it out successfully on at least half a dozen ROMS.
Although I am not intimately familiar with the inner working of code in either MSVC or WM in general, I don't know really know how this could interfere.
Other reported issues with MSVC involve:
Audio gateway being left open
Radio going dead
I'm also not sure how MSVC could interfere with the radio....
My first thought is Don't Blame MSVC!
I say this since I (and many other's) haven't had problems with it...it obviously is a program that CAN function properly.
If you are using a cooked ROM that has MSVC built-in or you are installing it from scratch, read through this whole guide and make sure you understand and update/tweak your copy.
I would recommend installing the latest version I have posted 1.6.19290 as I have already had reports of this clearing up some people's issue.
When posting problems regarding MSVC in the future, please refer to the main thread posts, where I will detail the information you should provide.
Let me know what you come up with!
I've got an issue I can't find an answer to. I have MSVC installed on my Tilt and it worked fine up until about a week ago. Since then I can initiate MSVC via my bluetooth headset but get no audio for the prompts (i.e. the ding to tell me it's ready for input, the audio confirmation for who to call).
Also, notifications stopped working via bluetooth. I've checked all the settings and everything is fine, they're exactly as they were when VC was working properly. I've tried uninstalling and reinstalling and deleting and repairing my headset. Nothing seems to work.
Any input on this would be greatly appreciated.
HI all,
I have setup MS Voice command on my Fuze to announce the name or phone number of the person calling on in coming calls. On my Tilt, it would announce the name either thru the speaker or my BT headset. With the Fuze, it will not. Is anyone else having this problem.
Also, with my Tilt, my ring tones would play thru my BT Headset and it will not on the Fuze. I don't know if this are related. I am using the BT headset on both.
Thanks
billf.
Yes, I'm having this same problem, and it is making me consider returning my Fuze and sticking with my tilt. Unless HTC or someone comes up with a fix within the next 2 weeks, my Fuze is going back. The only other bug I have noticed is that auto-correct does NOT work for the keyboard. It's supposed to automatically add in apostrophes for words, such as "can't, don't, won't" etc. Also, the word suggestion never shows up when I type, like it did on my Tilt. Of course it gives you suggestions with T9 turned on, but that's not the same as word suggestion. It would provide suggestions based on previous typing habits, and even predict entire phrases it thought I was going to type. Anyway....if someone figures out how to fix these problems, please let me know ASAP! Thanks.
I just noticed this tread. I too am having the same problem with it not announcing. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
starstreak said:
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
Click to expand...
Click to collapse
That is the way I have it set up. No go. What is weird is that my ring tone plays over the bluetooth headset, but the computer generated voice doesn't speak.
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
venelar said:
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
Click to expand...
Click to collapse
I'm glad that you decided to be a "guinea pig!" Because I was going to try this today! I was going to re-install the .CAB that came from my Tilt. But I'm glad to see if that doesn't work. In order to find a solution, do you think I should call AT&T or HTC? Which one would give me the solution? Because I only have 25 days left before my Fuze is non-returnable.
Hmm I never tried it yet on the fuze with my BT. I'll try it and report back.
Ok crap. Yeah. It doesnt "voice" announce. I never noticed it because I can dial from headset and even number dial from headset and it'll work. I can hear it repeating the number back.
BUT its not like its not working... If I remove the announce incommming calls, it makes my phone ring, but in my earpiece I hear a tone to tell me I have a phonecall. When I enable announce incomming calls, my phone vibrates and I hear my ringtone in my ear, and faintly I can hear that "tone" I heard before. So it sounds like the voice side of things isnt working.
Ok tried one last thing before my BT headset died. Doh!
When it died, my phone announced the caller. So it does work. Its just not working from the BT headset, you hear a bell sound or something.
Also, I just noticed my cars BT doesn't show battery of the phone. When my Tilt was on the car BT, it would show the battery remaining.
MS Voice Command
Check out the MS Voice Command guide on WinMo-Experts. There might be an answer to your problems in there.
http://www.winmo-experts.com/viewtopic.php?f=11&t=2
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
starstreak said:
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
Click to expand...
Click to collapse
Guess I didn't notice, but dose not work for me either. I do enjoy that on the Tilt, but I more like the Tilt for the message and email voice notification.
Beahcboyde/JON
PS. I'm simply not keeping the Fuze. I'll stick with my Tilt and TF2. love the whole setup and the speed of the touchflo usingHyperDragon Raphael
Signal is average compaired to my Tilt, when testing out T-Mobile connection. On 3G, I'm constantly around 2 bars(but it spurts to full so I know its working) So I think Hawaii is still bad with 3G is some areas.
I use VC ALOT. So I'm amazed I never noticed this issue where it wont say the caller in my ear.
I'm not sure if I'll keep the phone/drop ATT/both.
Please someone fix this! I dunno if it helps, but all you hear is a bell sound in the background of your normal phone ringtone. I know thats from the MSVC. The only thing not working is the announcement of whos calling. I think everything else is working. I can voice dial,recieve calender announcements and appoinments,etc from my BT headset.
Oh, not just BT headset. It won't announce it from the phone either.
I even did a "bloat free" installation.
the fix is on pdaphonehome.com i had the same problem with my sprint touch pro. weird since the diamond doesn't have this problem. you have to edit the registry to use the wav file instead of the default. only side effect with the fix is the phone will ring once and VC will announce the rest of the duration.
sid
Eww,junk fix. I'll check it out tho. While not a problem when I have my headset, it would be if i had my phone sitting on a table.
Reg hack
I copied this from pdaphonehome.com....kuddos to the person that figured this
out. Kind of a hacky way to get it to work though. Perhaps the brains around
here can figure it out.
--------------------------------paste-------------------------------
This isn't a complete solution - but it's an improvement.
With this fix - the ring tone will play for a second and then be cut off by the call announcement. The announcement will be at a lower volume. The announcement will repeat - the ring tone will not be played again.
NOTE THAT YOU SHOULD ATTEMPT THIS FIX ONLY IF YOU ARE COMFORTABLE IN UPDATING YOUR REGISTRY.
Change the following registry keys:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
change from VoiceCommand1 to Ring
HKCU\ControlPanel\Sounds\TTSAnnounce\Script
change from as5p to v0p (that's v-zero-p) - for vibrate & ring, or p (ring only)
The above fix seems to get the announcements reliably, and doesn't break the set vibrate/set ringer features in the TF3D interface.
Hopefully we can find a better solution - that will restore the full functionality of Voice Command incoming call announcements - and not need this hack.
Another option is to manually overwrite the ringtone file name:
HKCU\ControlPanel\Sounds\RingTone0\Sound
change to \Application Data\Volatile\TTSCallerID.wav
This fix replaces the ringtone with the call announcement - and at full volume.
BUT this solution has several problems, including breaking the set vibrate/set ringer feature in TF3D.
From reading that, if I DON'T use the TF3D ring/vibrate, but use the windows mobile one, I should be fine by doing the second hack listed above? I think I could live with that as I eventually will kill the TF3D just so I can get the calender of my Pocket Informant to show instead. Only thing I like was the Weather and clock of the TF3D anyways and ATT crippled the clock by removing the animation.
Doe anybody know how to do the 2nd option? Not sure if I'm supposed to delete the whole registry line or somehow add to that line?