BLuetooth Internet Sharing not working - Tilt, TyTN II, MDA Vario III General

hey guys, I'm running the ultimate-X2 rom pack from here and I can't seem to get the configuration of my blue tooth working with my EEE. I've tried BT DUN and it keeps reporting back that the modem is out of order, any ideas?

Do you have active sync on the computer? I don't remember if it needs it or not for BT.

yea AS is on there and everything works as it shoudl through a usb cable, just can't get DUN to work or PAN

Are you using WM5 or WM6.1? I know that with 6.1 you need to use the Internet Sharing app.
Also, which Bluetooth stack are you using? I got it to work on a Toshiba BT stack, but once I figured out how to AS over BT, it stopped the net sharing from working. I think you can only have one pair at a time. I'm not sure though. I'd also like to know how to get both working without interfering with one another.​

WM 6.5 and i'm using the built in bluetooth adapter on my EEE, no idea what stack its using

I got it, didn't have my pair set up right and PAN was the proper way to do it and use IS on WM. the modem trick was a no-go and worthless IMO

Good. Glad to hear you got it working. I got my internet sharing to work once, but once I set it up to ActiveSync over Bluetooth it stopped working. I guess when it's paired once it won't let it be paired again. Anyone have any support for this? I'm using a Toshiba Bluetooth stack (sadly... thinking of switching to MS stack) and a Tilt ROM.

Related

BroadComm Bluteooth Stack

For any who wants to upgrade their existing PPC's Bluetooth stack to BroadComm stack...download from here : http://rapidshare.com/files/67820520/WidcommBluetooth.rar
ather90 said:
For any who wants to upgrade their existing PPC's Bluetooth stack to WIDCOMM stack...download from here : http://rapidshare.com/files/67820520/WidcommBluetooth.rar
Click to expand...
Click to collapse
That's great...
But - have you try it on your Hima? If so... then it's fantastic
sorry i ahvent because my chraging block is broken..and i dnt have a card reader..will sold tomorrow
OK then... I'll try to check it tonight. Plus, I'll recombine this with a patch to a single cab.
gud and thnxx
BT
...for me working corectly great work. thx
Sweet! Finally, i can get rid of that crappy MS stack in my ROM.
Thanks ather & Helmi
EDIT: Stack works perfectly! File transfer is back to what it should be and everything's sweet!
2 questions tho.
1: Does this stack have A2DP? I've put off buying BT headphones cos the MS stack didn't support it, if this one does i'll probs go pick up a pair.
2: Know of any good bluetooth IM clients? A few mates of mine have XDAs and it'd be pretty sweet to chat to each other over bluetooth instead of using GPRS (we all work in the same vicinity (diff rooms) and at times, it'd be handy to send a quick bluetooth IM). I'm thinking if we were all on the same bluetooth personal / public network, the client'd be able to communicate with another client. In which case, it wouldn't need to be a specific bluetooth client (as the stack should, theoretically, transmit inet data over the bluetooth network), just a network client.
NxJay said:
Does this stack have A2DP? I've put off buying BT headphones cos the MS stack didn't support it
Click to expand...
Click to collapse
MS BT stack under WM 5.0 and 6.0 supports A2DP without any modification.
Works great on my Himalayas.
Sascha
NxJay said:
2: Know of any good bluetooth IM clients? A few mates of mine have XDAs and it'd be pretty sweet to chat to each other ...
Click to expand...
Click to collapse
Do you mean voice chat or txt chat? (I'm not an IM expert)
It sounds to me like we could theoretically use our devices more or less like good old walkie talkies
u can get it here : http://www.mulliner.org/bluetooth/btchat/
ather90 said:
u can get it here : http://www.mulliner.org/bluetooth/btchat/
Click to expand...
Click to collapse
that website tells me it's only for Linux. It looks like it's only txt based?
Found this link
http://www.eurescom.de/~pub-deliverables/P1100-series/P1118/D3/VoiceOverBluetooth.html
Only readable in MSIE, horror in Firefox
Maggy said:
Do you mean voice chat or txt chat? (I'm not an IM expert)
It sounds to me like we could theoretically use our devices more or less like good old walkie talkies
Click to expand...
Click to collapse
I was reading something last night about a user who'd hacked MS portrait to run as a PTT (push-to-talk) app over a bluetooth network, looked interesting. [url='http://www.pocketpcthoughts.com/forums/viewtopic.php?p=371262]Blog article[/url] | [url='http://winmobiletech.com/portrait/]MS portrait hacking link[/url]
Another app (currently in beta) is one from hipvoice.com. Apparently it's designed entirely for PTT over any network (bluetooth, wifi, gprs-etc)
TBH either text or voice IM would be good. It'd certainly be a helluva lot cheaper than SMSing friends in different rooms at work/college.
Lastly, anyone know why BT shuts off the second the device goes into standby? I used to have a widcomm stack on WM5 (a long LONG time ago) that didn't have this problem. I used to be able to start BT transfers and leave the device in my pocket (they'd still transfer even if the device standbyed). Now, the second the device turns off, all file transfers are instantly cut.
[url='http://forum.xda-developers.com/showpost.php?p=1072976&postcount=9]Here[/url]'s an old forum post i dug up showing that widcomm used to work in the background on WM5. Any reason why it won't do the same on WM6?
did u try the Broadcomm stack
8Mb of program my god!!! that too resting inside the \windows . the Hima shall crawl and sleep..
ather90 said:
did u try the Broadcomm stack
Click to expand...
Click to collapse
Same difference. Widcomm got taken over by broadcomm, so it's basically the same stack.
Yeah i'm using the stack on page 1 of this thread, works like a charm (apart from turning off during device standby).
Problems..
Hi there!
Tried and works great on my hima WM6..
Except 1 thing: i can not connect to my gps... I tried 1000 ways and no solution... It seams the com port part of the stack is wrong...
BTW i wanna uninstall... i tried and it doesnt worked... after uninstall the original bluetooth progs says there is a problem with ure hardware...
How to get back the "old" crappy MS bluetooth??
Thx..
I get this error:
The Bluetooth Radio failed to turn ON due to insufficient driver memory available.
You must perform a normal reset before you can turn ON the Bluetooth Radio.
First i install the stack, then the install do a soft reset and then i install the patch.
I've just switched for the PAN. everything is working fine, except for the SerialPort. I Think this stack need's some tweaking/hacking.
When I tested with my BT GPS, the GPS LED stopt blinking = it means the GPS is connected.
But for some reason the software/application can't find the BT GPS.
BTW does anyone know if it's possible to keep booth stack's on the device? I Love PAN, but still need SerialPort.
Thanks.
I am too stupid to use your software. With your WM6 ROM active sync not working and with other ROMs i get this error using this BT stack:
Error

Bluetooth Stack problem on Kaiser - automatically re-establishing pair

Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
adamcullen said:
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
Click to expand...
Click to collapse
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
There is a know problem with the Parrot kit and you will find a thread in this forum where a member has contacted Parrrot who replied that they are addressing the issue.
This one my be usefull.
http://forum.xda-developers.com/showthread.php?t=340908&highlight=parrot
NuShrike said:
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
Click to expand...
Click to collapse
Hi, thanks for that pointer ... most of what is described in that MSDN library isn't in my registry.
Im going to manually insert them all and see what happens.
A
Still no luck
I tried updating the Reg with the tweeks as suggest ... but still no luck. All i get is still the initial pair, but on disconnection, no automatic re-pairing of the device to the car kit.
Im doomed at this stage.
You're not alone. I have the same problem with my Motorola S9 headphones and Microsoft SYNC in my 2008 Ford Edge. Sometimes I have to turn BT on and off a couple of times for it to connect.
agreed
Turning the BT on and off a few times has also be part of my "solution" package.
This really isn't acceptable though. This device should automatically pair up, just like every other BT device does. BT is a protocol that should be adhered to and just work.
I have also tried this on my other WM device. It pairs a little better, but is not great. I've tried compairing the registry values of that device to my Kaiser, but I just dont understand the functionality of the reg settings enough to work out what to change.
Is there some developer out there who can help? This type of problem was experienced by us all back in the early days of the Hermes and this community sorted it out.
Can any developer out there help, like working out a port of the Widcomm BT stack for Kaiser?
a
Interesting. I have a Nokia CK-7W bluetooth car kit and the Tyn II has re-connected/connected to the kit every time. Actually more reliable than my SE K800i. Sorry that it doesn't help you.
Hey Juzzman,
nah, that doesnt help ... but does increase the frustration level!
Seems like you need to have a Nokia component in there somewhere for it to work ;-)
Anyhow, Im still convinced it is a bluetooth stack problem in the Kaiser. I'm going to try flashing one of the AT&T based roms and the other radio version and see what happens.
Cheers
Adam
I've had BT issues with all of my HTC devices, it's very frustrating.
Currently I've got a Kaiser (Orange), E650 (Orange) and a new S730, none of which work on my Pioneer headunit without Jetware.
The Kaiser with Jetware pairs up ok, but the sound is really tinny.
The E650 with Jetware sounds fine, but I can only send 150 contacts to the headunit.
The S730 doesn't pair, haven't put Jetware on it yet.
In the past I've had BT issues with M3100, C600, C500 etc etc.
Why the hell doesn't MS sort out their bloody BT stack!!!
Bluetooth problems
I am having the same problem with my JVC bluetooth unit BT1000. It will pair ok first time, allows me to make 2 calls. Will not the reestablish a connection/pairing. JVC worked fine with my sony erricson and nokia phones. Anyone found a cure to this?
Same problem with the stock AT&T rom (1.27.12.11) with the H700 headset.
Turn bluetooth on it normally sees the headset. If not turn it off and on again to get it to work. Once working it normal looses the connection after an hour or so.
Could it be a BT 2.0 Compliant issue?
I have posted this same problem earlier in xda-deveopers, on htc wiki and aximsite. Many people have viewed and are experiencing this same problem, but no one has posted any solution specific to my problem either. I hope a developer can solve this one for us. Is it a BT stack problem, or a BT 2.0 compliant problem, or a need for an updated ATT ROM to solve this issue? (I currently am using the stock ATT ROM 1.57.. that shipped with my Tilt.)
When I use my Motorola H700 with the Tilt the BT works fine, UNTIL, I use the voice speed dialing from the Tilt. Once I use the voice speed dialing directly on the Tilt, the Motorola H700 will no longer connect. I have to do a soft reset or go through the pairing process again. Once I re-establish pairing again, the H700 will continue to work fine, UNTIL, I use the voice speed dialing on the Tilt. Then we're back to having to do a soft reset to again establish H700 connection with the Tilt.
NOW, I just received a call back from an HTC tech who told me the problem is likely due to the Motorola H700 being only BT 1.2 compliant. He recommended that I try the Motorola H12, which is BT 2.0 compliant, but he could not absolutely guarantee this would solve my problem.
Does anyone know for SURE that the Motorola H12, being BT 2.0 compliant, will solve my problem? Or is there another solution?
Note: I have tried MS Voice Command 1.6 (full version), but the above problem still occurs. I have also tried Jetware, but again, no go. I am not sure that there is going to be an updated AT&T ROM to solve this issue either.
Additional Note: I have also tried other BT devices, such as the Jawbone, and the Plantronics Voyager. All do exactly the same thing as above.
Anyone have any solution? If the Motorola H12 is the solution, that would be great...
Thanks in advance.
I'm having the same problem with my new carkit. Did anyone ever find a solution to this??

HTC TYTN2 ad a Bluetooth GPS?

Hi
Is there any software for the tytn2 which will allow me to use it as a bluetooth gps?
Thanks
i have installed a program named GPSgate. You can try this... but i never tested it. You can link your gps to bleutooth virtual com port and trough USB i thougt.
Good Luck
GPS2Blue, work perfect with my Kaiser and my UMPC via bluetooth
Looks like GPS2Blue will do the trick - what settings did you use on the TYTN2 ?
Thanks
I had the same question this morning Downloadd GPSGate end it worked perfect as a GPS via BlueTooth.
How did you do that doemaarwat
lol die naam ook
assangflexx said:
How did you do that doemaarwat
lol die naam ook
Click to expand...
Click to collapse
Ach ik Doemaarwat
No just kidding. I installed the software on my TyTN II. Then started the program and it came with a wizard. I checked Active Sync and BlueTooth. After that you have a new row at the bottom of your screen. There you can see that it is active. I turned on the BT on my device. Then browsed BT devices on my computer and there a got a SPP port and it was mapped to COM18. In my program (which we wrote ourselves at our company) I connect to COM18 and all works fine.
Yes Blue2GPS is small, simple, light and it worked with NO FUSS and no bull.
I can use the GPS on my phone to track my position using Google, Microsoft's Live search and Delorme all the while sending a GPS signal to my laptop where I can also track my position - Lots of fun!
GPS2BLUE is but simple - It works.
Beautiful. Had exactly the same question and this has flatly answered it I spent hours this morning trying to get my Tytn2 to work as a standalone GPS receiver that my old brick of a Ipaq h6340 could use for it's SatNav software.
Thank you to all
Yep, try GPSGate.....
This is going to sound silly, but is it possible to share a bluetooth GPS via Bluetooth on the Tilt?
I have an unused smartphone with Tom Tom on it which I'd like to use as a car nav so my Tilt isn't tied up doing it. But I want the Tilt having use of the GPS for TrackMe and other things.
I will not use the Tilt's GPS for many reasons, so I use a Bluetooth GPS, and share it out to multiple programs on the Tilt via GPSGate. All that works well. But it'd be nice to be able to share the bluetooth GPS with the other smartphone as well.
AFAIK the GPS won't connect to multiple devices, and I tried to set up a bluetooth output in GPSGate which didn't seem to work. I know the Tilt can connect to multiple devices on Bluetooth, but perhaps GPS data is too much to share. But figure it's worth asking.

how to get a2dp working

i cant find how to get this working on my kaiser.
ive got s2p i heard thats supported
jayjay8585 said:
i cant find how to get this working on my kaiser.
ive got s2p i heard thats supported
Click to expand...
Click to collapse
Yes, s2p will work ok with wireless stereo bt devices. I use motorola s705 and t505 a2dp devices. I don't think that the apps need to specifically support a2dp since every multimedia app I have used has worked.
Sometimes the a2dp connection is not established when I want it. Note that both devices also work in modes other than a2dp.
BatteryStatus includes optional tray icons for phone, wifi and BT. The BT icon menu includes an a2dp indicator/on-off switch. Sometimes i use this for the T505 to force the a2dp connection.
A2DPToggle also works. It is a Today plug-in. I read that it is a battery hog but haven't confirmed. If you can't get a2dp working using A2DPToggle then you might want to dig deeper into your phone/rom.
I am using stock WM 6.1 roms from HTC or at&t (official - test) generally without problems but have to muck around sometimes to get a2dp working by either toggling BT on/off on either the handset or BT device.
i want to kno how to use it tho there doesnt seem to be an app for it i tried finding my mates stereo with my bluetooth stock app and it didnt work how do you initiallise a2dp on the stock roms.

Bluetooth problems

Hey guys,
I installed rom of wm 6.1. Now I commute a lot and I used to hook up my phone with the bluetooth enabled sterio in my car, after installing this new rom I'm having problems using the bluetooth. I'd manage to pair it with my sterio but if I end a call it would drop the bluetooth connectivity with the sterio. Sometimes it wont even connect to the sterio/ not detect it. The rom already has bluetooth explorer(which I'm not familiar with). Any ideas suggestions will be appreciated.
Thanks.

Categories

Resources