Good morning valued members,
Hope all is well!!!
I will summarize this as quickly as possible. I am stuck at the tri color stage and can not do anything or flash any roms.
Before I state what I have done, I want to let you know that I have done my research, gone through the wiki, FAQ, the flash posts and all the other threads that retain to this issue.
My steps:
I followed the threat that explains how to flash a rom for noobs. Step by step. Downloaded the required files, etc...
It was ok, it got connected and it started to flash the new rom. Got stuck at 17% and exited out. So I followed the recovery step.
when continuing the flash, it would get stuck at 0%. Tried it several times.
I would get the 260 error. I tried several times, continue to get the same error after performing the recovery successful.
So I went through the thread that explains the steps on how to fix the kaiser if stuck on tri screen.
Downloaded the original ROM and tried to flash it. Wouldnt go past 1%. I tried several different versions, but I continued to get error 294. something about not being the right vendor. tried several other OEM ROMS, nothing.
Followed the error code, and tried to flash the HARDSPL, wouldnt go past 0%. Tried the MYTT boot, wouldnt boot.
I know the USB connects, otherwise it would not goto the progress screen when I try to flash any of the roms.
I continue to remain on the tri color screen.
So I have done everything possible in the threads. I will get the tri screen, i do see SPLD 8.0 on teh tri screen, as well as few other notes, something 1.93 000000 and KAISI 1**
Any suggestions? anything would help right now. I am running into a wall and not sure what to do
What Rom and radio do you have right now, And are you sure you unlocked your device?(CID Lock)
I had this problem to, I didn't unlock the device like I should do. but if you do it right it would be good. Also try reinstalling the newest Hardspl.
-Armazia
Related
Hi,
I am trying to flash my first rom, but failing at the first hurdle. I try and enter bootloader mode (vol & power down) but the phone shows the tricolor with the white band at bottom, then, before I can get the usb cable in, proceeds to show a completely white screen with the word "Loading..." - and it just stays there doing absolutely nothing.
Any ideas what is going wrong?
Cheers
Rich
Have you flashed HSPL before flashing the rom??
If not, flash HSPL then try to flash the rom, all will go fine.
Cheers for getting back to me, this is before I even get that far. I am following the instructions to use USPL, but getting the mentioned problem. I don't see how I can be doing anything wrong, but I must be, or there is some difference in my phone against others.
Cheers
Rich
Hi Rich, If you are having problems with USPL, can you please post in that thread rather than starting a new one.
Thread closed as per forum guidelines.
Dave
now almost a month i've been trying to get my D810 live again. i know there are many similar problem, but still don't get idea how i can make it work again.
could someone point me another way to recover my problem?
right now my D810 is stuck at tricolor mode. i can't flash Hard-SPL from computer, always fails, when progress is about to begin suddenly, it's restarted. i did continue the process with recovery but the result is same, could not update.
i have also try miniSD way. i've copy ROM into it and change name to TRINIMG.nbh, it's ask for 'Press power button to update', when i press the button. the process is begin. at some percentage it got stuck again. the error message was:
"Update Terminated
UPDATE FAIL"
also have try to copy HardSPL nbh to pda. using this nbh, still ask for 'Press power button to update', when i press the button, process is begin, and success. But later i restart the phone, result is not good, this time is stuck at White screen with the HTC logo
that my problem, thanks. any suggestion are welcome and great thanks for it
btw at first i use Olipro 1.30 and update at latest radio and use FInixNOver, i did make a successfull Update, but later it got hang at bootloader, so i get reflash with olipro 1.1. got run again. but later got stuck again. for short. i've also try HardSSPL_ZakMcRofl, ROM team Cv93, Marry
success to bring alive
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
johnyq said:
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
Click to expand...
Click to collapse
Why don't you flash back to original rom....than install spl and follow by yor selected rom.
Mine P3600i was down for quite sometime.................I used splxploit ...works.
I hope someone knows the answer or could help me out, I have been battling this issue for some time now.
It all started when I upgaded to cyanogen 4.2.6, there would be times when I would reboot the phone due to weird issues (unable to scroll in browser, slowness). Upon reboot I would be surprised with the tri color screen. I figured out that by holding down the VOL down button, it would work. (Like i said, WEIRD).
This method no longer works and the last update I ran was 4.2.8.
Here are the following steps I have tried to date: (to no avail)
1. Ran nandroid recovery
2. re-installed 4.2.8
3. Wiped, then re-installed 4.2.8
4. Tried installing 'signed-dream_devphone_userdebug-ota-14721'
5. tried installing Tmobile g1 DREAIMG.nbh (RC29)
At this point Im almost certain it is Bricked, unless one of you witty fellows can help me out!
Any help is appreciated!
Wrong place to ask questions bud, you should try Dream Q&A.
But, while I'm here, isn't the Tri-colored screen the SPL screen?
Not sure, I assume it has something to do with the radio. I will post this in Dream Q&A....
Thats the bootloader screen. Have you tried to flash thru fastboot.
Lol That's the bootloader, dude.
Anyways, I really doubt you're bricked. If you can get into recovery(power + home) you're not bricked.
Just go through the process of installing cyanogen's rom again- the htc recovery then the rom, etc.
Also, about the problems you had with cyanogen's rom. Obviously they're not problems with the rom, seeing how it works fine for the majority. You just need to figure out what you're doing wrong.
Move this thread already.
I say do a fresh install. Wipe everything, install the HTC recovery image first, then install Cyan's latest.
I did get my phone working again. thanks to everyone who helped out!
I ended up re-installing 'dreaimg.nbh', reverting back to the original OS from tmobile. during this process,I assume re-wrote the radio firmware, thus fixing my problem. (correct me if I am wrong)
And of course, I went back to cyanogen 4.2.9 in the end!
Hello everyone. In my attempt to experiment with custom ROMS yesterday, I seem to have sort of soft bricked my phone. When I install the stock OS, it installs fine, and I can start the phone. However, after it boots up, there are no apps. Just the clock at the top, the background, and the menu button in the bottom center (but pressing this button doesn't do anything). I can pull down the top menu and go to settings, but I don’t have access to anything else. Furthermore, after a couple minutes, the phone restarts itself. After this first restart, when its gets done booting, there is simply an empty black screen. The only way to get to the state mentioned before is to boot into bootloader, turn the phone off, and then turn it back on.
I’m wholly lost and out of ideas on how to go about troubleshooting this. Here is what I did yesterday to get to this point:
1. Unlocked the bootloader.
2. Flashed the latest Viper rom. It didn’t work; after booting up the phone was forever stuck on the Viper splash screen.
3. Flashed the stock Sprint HTC One rom. Again, after booting up the phone was forever stuck on the HTC splash screen.
4. Used TWRP to format all the data.
5. Flashed the stock Sprint HTC One rom again. This time it worked just fine. At this point, I thought I had discovered a valid method for fixing my soft bricked phone, so I decided to experiment with Viper and Android Revolutions roms to see if I could get them to work. I followed the process of installing a custom rom, getting stuck on the splash screen, formatting the data, then reinstalling the stock rom 3 times. On all three times the stock rom worked when I installed it. However, on the 4th iteration of this cycle, I reached the state I described above.
I tried using the RUU utility, but it doesn’t work (I get a signature verification error). I can enter bootloader and recovery without issue.
I've had this happen to me, Make sure that you re-lock your bootloader before the RUU
fastboot oem lock
I believe this will allow the RUU to start up right and repair. Lemme know how that goes.
jclark11 said:
I've had this happen to me, Make sure that you re-lock your bootloader before the RUU
fastboot oem lock
I believe this will allow the RUU to start up right and repair. Lemme know how that goes.
Click to expand...
Click to collapse
Do you mean you have had the same blank screen problam as well? Or RUU wouldn't work for you?
I'm pretty sure i relocked the bootloader when I tried doing the RUU, but I will definitely try again. Unfortunately, I'm on a trip at the moment, so I'm not sure when I'll be able to look at it again (hopefully Saturday or Tuesday).
Everything was going fine, I had it rooted, and was going to try putting a custom ROM on it, except I didn't actually have any Recovery software installed yet.
Now, after I rooted the phone, I power cycled it a few times to make sure, and I was sure. I tried a few SU needed programs, and they were able to obtain SU rights just fine.
The problem is when I followed this guide.
Apparently I can't link to anything, so.
I followed it, installed TWRP just fine I believe, seeing as it installed something anyways.
And then I turned off my phone to actually go into recovery.
Only to find that it wouldn't go into recovery. No, it just went to a black screen after the logo, with the soft key lights flashing and then...rebooted itself and did the same thing. Over, and over, and over.
So, right now I've pulled the battery out and it's just sitting there.
Is there anything I can do at this point to fix the phone?
I think i can help!
Your phone's bricked now all you need to do is to reflash the stock firmware and start over.
follow these steps carefully and you're good to go. If you have any probs i'm here to help out
http://forum.xda-developers.com/showthread.php?t=1448803