now almost a month i've been trying to get my D810 live again. i know there are many similar problem, but still don't get idea how i can make it work again.
could someone point me another way to recover my problem?
right now my D810 is stuck at tricolor mode. i can't flash Hard-SPL from computer, always fails, when progress is about to begin suddenly, it's restarted. i did continue the process with recovery but the result is same, could not update.
i have also try miniSD way. i've copy ROM into it and change name to TRINIMG.nbh, it's ask for 'Press power button to update', when i press the button. the process is begin. at some percentage it got stuck again. the error message was:
"Update Terminated
UPDATE FAIL"
also have try to copy HardSPL nbh to pda. using this nbh, still ask for 'Press power button to update', when i press the button, process is begin, and success. But later i restart the phone, result is not good, this time is stuck at White screen with the HTC logo
that my problem, thanks. any suggestion are welcome and great thanks for it
btw at first i use Olipro 1.30 and update at latest radio and use FInixNOver, i did make a successfull Update, but later it got hang at bootloader, so i get reflash with olipro 1.1. got run again. but later got stuck again. for short. i've also try HardSSPL_ZakMcRofl, ROM team Cv93, Marry
success to bring alive
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
johnyq said:
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
Click to expand...
Click to collapse
Why don't you flash back to original rom....than install spl and follow by yor selected rom.
Mine P3600i was down for quite sometime.................I used splxploit ...works.
Good morning valued members,
Hope all is well!!!
I will summarize this as quickly as possible. I am stuck at the tri color stage and can not do anything or flash any roms.
Before I state what I have done, I want to let you know that I have done my research, gone through the wiki, FAQ, the flash posts and all the other threads that retain to this issue.
My steps:
I followed the threat that explains how to flash a rom for noobs. Step by step. Downloaded the required files, etc...
It was ok, it got connected and it started to flash the new rom. Got stuck at 17% and exited out. So I followed the recovery step.
when continuing the flash, it would get stuck at 0%. Tried it several times.
I would get the 260 error. I tried several times, continue to get the same error after performing the recovery successful.
So I went through the thread that explains the steps on how to fix the kaiser if stuck on tri screen.
Downloaded the original ROM and tried to flash it. Wouldnt go past 1%. I tried several different versions, but I continued to get error 294. something about not being the right vendor. tried several other OEM ROMS, nothing.
Followed the error code, and tried to flash the HARDSPL, wouldnt go past 0%. Tried the MYTT boot, wouldnt boot.
I know the USB connects, otherwise it would not goto the progress screen when I try to flash any of the roms.
I continue to remain on the tri color screen.
So I have done everything possible in the threads. I will get the tri screen, i do see SPLD 8.0 on teh tri screen, as well as few other notes, something 1.93 000000 and KAISI 1**
Any suggestions? anything would help right now. I am running into a wall and not sure what to do
What Rom and radio do you have right now, And are you sure you unlocked your device?(CID Lock)
I had this problem to, I didn't unlock the device like I should do. but if you do it right it would be good. Also try reinstalling the newest Hardspl.
-Armazia
Help me please.
I had a HTC Dream I guess, flashed it with wrong ROM, which was made for HTC Hero.
From then on, the phone just doesn't work
1. I tried the recovery mode and reboot mode (Home + Power), (Home + Back) as well as Home + Camera. Nothing Works. It's still stuck at the startup screen <Black background shows white text says G1 T-Mobile.>
2. I tried pulling out the battery and put it back and tried to power it up. I retried the above step. Still the same.
3. I tried pulling out the SD Card as well and tried to power it up and retried the step # 1. Still the same.
I did try searching for similar posts but there are way too many and I have been digging them for the past 4 hours but couldn't find anything useful
Guys, Please share if anyone has any idea.
Thanks in advance
Steven
If home+power and camera+power don't work your phone is bricked.
also, post this in Q&A. this is either gonna get locked or moved.
and yes you are bricked.
You may not be bricked if you did not flash special spl or new radio, however, you will probably need fastboot/adb method.
Try searching, this has been addressed many times. Also try posting in right place next time too, although it will be a while since you've been a member since 2006 but this is your first post.
M..N said:
If home+power and camera+power don't work your phone is bricked.
Click to expand...
Click to collapse
What he said, but flashing a theme shouldnt brick your phone, only flashing an SPL or radio or something along those lines typically.
hi people.
hopefully 1 of you guys can help.
i flashed a dutty rom on my blackstone a while ago, and everything went fine. then a month or so later, for no reason, my fone just shuts off, 5 or 6 times a day. so i decided to flash the original software to see if its a hardware prob and then hopefully get the fone replaced.
the only problem is i managed to sync my fone ONCE since i put dutty's rom on and never since then. even in boot loader the fone only ever says "serial" and never, ever usb. i've tried different leads, different pc's, and these leads and pc's will connect to my old trinity which still flashes a dream!
so i reckon there must be some connection prob in the blackstone itself. any thoughts?
i read somewhere that you can flash from the memory card. so i got a rom, and copied it to the root of the card, then started in bootloader. it flashed up a grey screen with some writing on, then straight to the bootloader screen so fast, i never got chance to read what it said. did i not get something right?
the rom is titled "BLACIMG.nbh" on the card
thx in advance
two_bus said:
hi people.
hopefully 1 of you guys can help.
i flashed a dutty rom on my blackstone a while ago, and everything went fine. then a month or so later, for no reason, my fone just shuts off, 5 or 6 times a day. so i decided to flash the original software to see if its a hardware prob and then hopefully get the fone replaced.
the only problem is i managed to sync my fone ONCE since i put dutty's rom on and never since then. even in boot loader the fone only ever says "serial" and never, ever usb. i've tried different leads, different pc's, and these leads and pc's will connect to my old trinity which still flashes a dream!
so i reckon there must be some connection prob in the blackstone itself. any thoughts?
i read somewhere that you can flash from the memory card. so i got a rom, and copied it to the root of the card, then started in bootloader. it flashed up a grey screen with some writing on, then straight to the bootloader screen so fast, i never got chance to read what it said. did i not get something right?
the rom is titled "BLACIMG.nbh" on the card
thx in advance
Click to expand...
Click to collapse
First off all Flashing queries should be posted in this thread.
To answer your question.......If you are only getting 'serial' at bottom of bootloader I'd recommend flashing original stock rom which came with your device first before trying to flash a cooked rom. This original stock rom can be flashed even if it states 'serial' in bootloader (note - this is the only rom this will work with). Stock roms can be found here. Once you have flashed this stock rom, use this guide to flash rom
For your info, flashing from sd card should be done as follows:
Copy BLACIMG.nbh into the root dir of your Storage Card.
Be sure to have at least 30% of charge.
Turn off your device by using the Power Button
If you use HardSPL: Go to bootloader mode. Push and hold Vol Down + press Power button. The device will display a message and offer you to flash.
If you use USPL: Remove your microSD card first to prevent starting the flash, then go into bootloader mode. When in bootloader mode insert the card and follow the instructions on the USPL page to start USPL. The device will restart into USPL and will now present you the message to flash.
As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Please post further flashing queries in dummies guide thread
Thread closed
Please help, I was uninstalling some applications from my HTC PURE and had to restart the phone, when it was rebooting it hung at the ATT screen and there was small red text in the bottom left screen.
I had previously installed HardSPL 1.83 but relocked it via instructions in 2nd post because I'm still deciding if I wanna keep the phone and didn't wanna do anything for warrenty reasons.
I have the stock ROM and never installed anything except the HardSPL and the revert.
Please help me, I have tried to load the ATT Pure Stock/Shipped ROM I found here but everytime I try to in the bootloader mode it says either "no image file" or hangs at loading depending what I've tried to name the file. Also I've tried to run customruu.exe to install the stock ROM and also tried to install HardSPL 1.83 but it hangs at 0% and eventually wants to do recovery on the PC.
How do I fix this problem, and preferabbly get it back stock. I do have a warrenty, well unless I violated it by installing HardSPL then doing the revert.
Thanks
viper2g1 said:
Please help, I was uninstalling some applications from my HTC PURE and had to restart the phone, when it was rebooting it hung at the ATT screen and there was small red text in the bottom left screen.
I had previously installed HardSPL 1.83 but relocked it via instructions in 2nd post because I'm still deciding if I wanna keep the phone and didn't wanna do anything for warrenty reasons.
I have the stock ROM and never installed anything except the HardSPL and the revert.
Please help me, I have tried to load the ATT Pure Stock/Shipped ROM I found here but everytime I try to in the bootloader mode it says either "no image file" or hangs at loading depending what I've tried to name the file. Also I've tried to run customruu.exe to install the stock ROM and also tried to install HardSPL 1.83 but it hangs at 0% and eventually wants to do recovery on the PC.
How do I fix this problem, and preferabbly get it back stock. I do have a warrenty, well unless I violated it by installing HardSPL then doing the revert.
Thanks
Click to expand...
Click to collapse
Of course you hard reset?
Make sure your SD card is formatted to Fat32 and you may mant to try a different card, 2gb - 4gb.
What does your SPL say now in bootloader mode?
Yes I tried a hard reset. I can try another sd card the one I used was fat32 and 2gb. I believe it says 1.33 can't look now but I know it's not the same as an untouched pure.
Help!
You are not the only one who is having this issue. I am frustrated beyond frustrated. How are other people flashing their out of the box ATT Pures using the same exact steps but I can't? It's making no sense.
1. I turn off firewalls.
2. I've tried both usb and sd card boot, didnt work
3. I installed the enablerapi cab
Nothing works and I am having the same problem you are having...it stays on 0% forever and it doesnt even prompt me saying there is an error it just sits on 0% until I unplug it...
Help!
themasterhook2000 said:
You are not the only one who is having this issue. I am frustrated beyond frustrated. How are other people flashing their out of the box ATT Pures using the same exact steps but I can't? It's making no sense.
1. I turn off firewalls.
2. I've tried both usb and sd card boot, didnt work
3. I installed the enablerapi cab
Nothing works and I am having the same problem you are having...it stays on 0% forever and it doesnt even prompt me saying there is an error it just sits on 0% until I unplug it...
Help!
Click to expand...
Click to collapse
Are you trying to HSPL or flash a ROM?
Well
According to what i've read, you have to do Hard SPL before you flash a rom, so i've been trying to HardSPL and it doesn't work! I even tried to skip the step and just flash the rom and it doesnt work..
Now, I also have an ATT Tilt to and I JUST flashed a rom 30 mins ago, so it has nothing to do with firewalls or anything as far as my computer goes, I think its the phone, so what can I do?
How to flash HSPL.
themasterhook2000 said:
According to what i've read, you have to do Hard SPL before you flash a rom, so i've been trying to HardSPL and it doesn't work! I even tried to skip the step and just flash the rom and it doesnt work..
Now, I also have an ATT Tilt to and I JUST flashed a rom 30 mins ago, so it has nothing to do with firewalls or anything as far as my computer goes, I think its the phone, so what can I do?
Click to expand...
Click to collapse
Its a good thing flashing the ROM didn't work, you'd be bricked.
For flashing HSPL, it seems that newer phones are having an issue.
Something may have been changed that is preventing the unlocker from working.
Do the following;
1. Hard Reset
Instructions:
- Soft reset with stylus
- Hold Vol up & Vol dwn simultaneously until white screen appears
- Following screen prompts, Press Vol up to confirm.
2. Go to bootloader mode.
Instructions:
- Turn off your device using the power button
- When the device is turned off, simultaneously press the Vol dwn + Power button
- Your device will startup in Bootloader mode
Should say SPL: 1.33 or something.
3. Sync your phone to your PC.
4. Install enablerapinew.cab
5. Unzip both Topaz_CustomRUU_v1.1.zip & SPL_183.zip to the same folder
6. Run the CustomRUU.exe
This process should install HSPL and now when you enter bootloader mode you should see something like SPL: 1.83 Olinex.
If so, you're ready to start flashing custom ROMs.
If not, please report all errors to the HSPL thread or PM Olipro.
**I take no responsibility for any loss of data or functionality of your device.**
See, the problem with your instructions are...
1. You cannot soft reset with the stylus, I don't see a button anywhere on the phone ( ATT PURE not Diamond 2 )
2. Holding Vol up & Vol down simultaneously until white screen appears doesn't work. The only thing that works is when I hold Vol Down and the screen with the colors come up, not a white screen.
So i'm still lost. Thanks for your help regardless. I just really want to flash a new rom so I can stop using this stupid slow ATT rom.
So basically you are messing with your Pure and don't know how to soft reset?
Remove the stylus and in the groove for the stylus is a red dot, that is the red reset button. Insert the tip of the stylus in the red dot and push. Now the Pure will soft reset.
Probably should familiarize yourself with the device before you finish turning it into a brick!
Oh wow. That is so hidden.
On my Touch Pro 2 its right there on the side where you can see it, with words.
Anyway, Thank you very much, i'll try that.
Still, what about the Up and Down button volume button function so I can go into bootloader mode?
themasterhook2000 said:
On my Touch Pro 2 its right there on the side where you can see it, with words.
Anyway, Thank you very much, i'll try that.
Still, what about the Up and Down button volume button function so I can go into bootloader mode?
Click to expand...
Click to collapse
Now that you found the soft reset button.... follow my procedures.
Note- you have to hold the keys IMMEDIATELY after soft reset before the boot screen appears.
Ok.
Bruce Inman said:
Now that you found the soft reset button.... follow my procedures.
Note- you have to hold the keys IMMEDIATELY after soft reset before the boot screen appears.
Click to expand...
Click to collapse
Didn't work, I re-did the steps you listed 3 times over to make sure I was correct and the same results. I guess ATT has found a way to stop their phones from being unlocked.
Thank you for your help regardless.
themasterhook2000 said:
Didn't work, I re-did the steps you listed 3 times over to make sure I was correct and the same results. I guess ATT has found a way to stop their phones from being unlocked.
Thank you for your help regardless.
Click to expand...
Click to collapse
You should probably post over in the HSPL thread.
You'll get more help over there. There are many others having similar issues and there may be a fix over there.
FYI, when you get to the tri colored screen, that is where it shows what SPL you have currently.
Updating rom freeze
Hi, I don't post much if at all, normally you guys have it right on the button, this is my 3rd phone to run custom roms on but for some reason it just freezes on the "Updating ROM image on your PDA Phone..." screen and doesn't continue past, on my last 2 phones active sync worked well with updating to custom roms,seems like my Pure produces the same error after the attempt, its a communication error "ERROR [262] : UPDATE ERROR", now recovering from the error is not a issue, we all have familiarity in that area but I was wondering if it could be something as simple as the cable that was sent with my phone or if its possible to flash rom through sd card as opposed to using active sync?
drearystate said:
Hi, I don't post much if at all, normally you guys have it right on the button, this is my 3rd phone to run custom roms on but for some reason it just freezes on the "Updating ROM image on your PDA Phone..." screen and doesn't continue past, on my last 2 phones active sync worked well with updating to custom roms,seems like my Pure produces the same error after the attempt, its a communication error "ERROR [262] : UPDATE ERROR", now recovering from the error is not a issue, we all have familiarity in that area but I was wondering if it could be something as simple as the cable that was sent with my phone or if its possible to flash rom through sd card as opposed to using active sync?
Click to expand...
Click to collapse
Yes, you can flash through storage card, just rename the .nbh to TOPAIMG.nbh, Put in root of storage card and enter bootloader mode.
You have HSPL'd, right?
Bruce Inman said:
Yes, you can flash through storage card, just rename the .nbh to TOPAIMG.nbh, Put in root of storage card and enter bootloader mode.
You have HSPL'd, right?
Click to expand...
Click to collapse
I was just going through the thread. I have the same issue. i have place topaimg.nbh in the root of storage card and entered bootloade mode, it shows loading and is stuck at 0%.
HSPL is 1.83. Went through entire thread of HSPL but unfortunately didn't find any solution.
arun.ramachandra said:
I was just going through the thread. I have the same issue. i have place topaimg.nbh in the root of storage card and entered bootloade mode, it shows loading and is stuck at 0%.
HSPL is 1.83. Went through entire thread of HSPL but unfortunately didn't find any solution.
Click to expand...
Click to collapse
Just to confirm, you have to name it exactly "TOPAIMG.nbh".
With all of the people that have tried all methods and still can't flash, something must have changed in the stock SPL.
Hello people
Hello, did anybody found the way to flash HTC PURE , I have the same problem 0%
Thanks
same problems here
i have same problem with pure to.
coldun187 said:
Hello, did anybody found the way to flash HTC PURE , I have the same problem 0%
Thanks
Click to expand...
Click to collapse
From HTC site (HTC Pure support):
What is a Soft Reset and how is it performed?
A soft reset basically resets the memory structure in the handheld. This recovers the device from memory conflicts, corrupted system service chains (mainly due to attempting hacks), memory leaks, and system lockups due to the “Fatal Exception” program errors. Removing the battery from the device while it is still powered on is NOT a soft reset and can actually damage the device.
A Soft Reset is performed by:
Remove the Battery cover and the Stylus from the device.
Insert the tip of the stylus into the Reset hole located at the entry point of the stylus silo.
The device will reboot.