850mhz touch hd - Touch HD Windows Mobile ROM Development

hi all im new here
i got a 850/2100mhz model
is there anyway to change that to
900/2100mhz
or is it hardware
ty
tony

jacko1977 said:
i got a 850/2100mhz model
is there anyway to change that to
900/2100mhz
Click to expand...
Click to collapse
These are the frequencies of the supported networks, not the CPU frequency.
Cellular_Networks: GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100
with friendly greet
starbase64

to elaborate on what was said above, those frequencies pertain to your radio which is hardware dependent. You cannot change them in any way on the HD.

Model T8282 is 900 mhz
Model T8285 is 850 mhz
Unfortunately it is hardware dependent and cannot be changed. You might however find some users who purchased the T8282 by mistake and wish to swap with you... I know many users were upset that 3G wouldn't work on their phones due to the frequency... Just a suggestion...
jacko1977 said:
hi all im new here
i got a 850/2100mhz model
is there anyway to change that to
900/2100mhz
or is it hardware
ty
tony
Click to expand...
Click to collapse

thanks guys
James62370 said:
Model T8282 is 900 mhz
Model T8285 is 850 mhz
Unfortunately it is hardware dependent and cannot be changed. You might however find some users who purchased the T8282 by mistake and wish to swap with you... I know many users were upset that 3G wouldn't work on their phones due to the frequency... Just a suggestion...
Click to expand...
Click to collapse
its werid im looking at the model no its saying T8282 is the 900/2100 model ur saying but it goes on 3g telstra 850mhz but not 3g optus or vodafone 900mhz unless im reading ur post wrong or something i flash it to get rid of telstra junk unless i did something wrong

if you have the telstra version, I agree, my pc recognises the phone as a t8282, but it is the t8285 as the 3g is working in my 850MHz band freq.

oh ok so the info in start/ settings/system/device information/identity in the phone is normal

Related

How To Change From Gsm 900 To Gsm 850?????

inmy Country Only Works Gsm 850, Does Anybody How To Change The Band The Htc Diamond, Cause This Phone Is A Tri Band And Works With 900 Gsm.
Can Anybody Helpme Please????
You can change the band in Comm Manager. There is a tab called Band.
And only assuming you bought the appropriate device, since if you bought the European device, then you do not have the 850 support.
amir77a said:
And only assuming you bought the appropriate device, since if you bought the European device, then you do not have the 850 support.
Click to expand...
Click to collapse
Which country's running 850 mhz ... I thought that band was reserved for GSM-R (GSM Rail private network) - Or at least it is in the UK !.
I believe some countries in south america uses the 850band, and the US. It is wise to read the specs when you buy a phone. the current diamonds (european, asian) do not support 850. It would have been a quad-band band phone, not a tri-band if that was the case. There will probably be a US-version, but afaik it's not available as of now. sorry.
Im from South America, I thuoght that in my country works the 900 mhz, but only works with the 850mhz. I dont know what to do, i suppose i have to sell it on ebay cause nobody has a solution. thansk anyway
Why dont you return it to where you bought it from??...i dont know the laws of your country but if you have only had it a few days then you should be entitled to a refund as the phone is not suitable for you.
ajs007 said:
Which country's running 850 mhz ... I thought that band was reserved for GSM-R (GSM Rail private network) - Or at least it is in the UK !.
Click to expand...
Click to collapse
United States of America.
ajs007 said:
Which country's running 850 mhz ... I thought that band was reserved for GSM-R (GSM Rail private network) - Or at least it is in the UK !.
Click to expand...
Click to collapse
Canada and US
Somebody told me that there is a Software so you can change the GSM, and something abour the hardware, other guy told me about the Radio but i dont think so!!! i need some professional help please!!!
Try to flash the radio 1.00.25.05 or 1.00.25.06. I tested this two radio with VIVO Brazil that transmit on 850MHz and is working well.
http://forum.xda-developers.com/showthread.php?t=407956
Thanks my friend, im going to try it!!! I'll let you know what happens!!!
It didt work my friend, cause my phone is a Tri-Band phone, yours maybe is a Quad-Band phone. that radio is only fot Quad-Band phones.
Thanks anyway.
I need some help!!!!
jmcorral said:
It didt work my friend, cause my phone is a Tri-Band phone, yours maybe is a Quad-Band phone. that radio is only fot Quad-Band phones.
Thanks anyway.
I need some help!!!!
Click to expand...
Click to collapse
You have a touch diamond, right? I have it too and also if on HTC site is wrote that diamond is tri band, with radio 1.00.25.05 and radio 1.00.25.06 is actually working as quad band GSM.
Check this post, the guy tested the quad band rom with a professional communication tester:
http://forum.xda-developers.com/showpost.php?p=2413582&postcount=122
You have flashed the .05 radio? What carrier are you using?
im from colombia
i'm from colombia and i install the radio rom 25.05 and now is working in 850
before i installed the signal sucks with the 25.03... but now is better than never before.
i think that your need to reflash the 25.05 radio rom
Im going to try again my friend!!!!! My carrier is Movistar.
I would let you know what happens!!!!
thank you very much, i appreciatte your concern about my problem, thanks my friend!!!
it works!!!!!!!!!!!!!!!!!!!!!!! thanks my friend i really appreciatte!!!!!!!!!!!!!!!! you rule!!!!
Hello everyone.. I'm also from Colombia and I want to give you all information about what i did in order to solve the issue of the 850mHz.
I flashed HardSPL and ROM for Radio as indicated in:
http://forum.xda-developers.com/showthread.php?t=416211 (As many people I'm using HardSPL 1.40.OliNex
and Radio 1.00.25.05 )
I also flashed a cooked ROM from:
http://forum.xda-developers.com/showpost.php?p=2405336&postcount=1
I did all that yesterday so I havent been able to test signal outside from Bogota, but improvement on the device and the signal reception is obvious. I also did the test of dialing *#*#364#*#* on the key pad of the phone and I saw that the phone was working on the 850mHz frequency.
I have tested the device with two different carriers... Movistar and Comcel withouyt any problem. I was hoping with Comcel to get 3G signal (due to activation of 850mHz frequency) but still does not work. Some say that is imposible due to hardware issues, some other people says that Hardware in Diamond is capable of 3G US standard.... LETS SEE!!! HOPEFULLY SOME OF THE GURUS ARE WORKING ON THIS ISSUE.
It works in Mexico
Hello there.
Hell i bought mine directly from HTC, it was shipped with a spanish ROM 1.93 and radio .05. As soon as I inserted my GSM chip it worked with no problem. We are still waiting that some Dev found the key to allow our first gen diamond to work with 3G. Because imported phone onl ywork with 3.5G at 900mhz

Unbranded X1 3G working in Canada / USA?

My friend has a unbranded X1, but don't know if can be compatible for the 3G network in Canada or USA? Anyone knows? Or North American ROM needs to be flashed on to enable 3G compatibility with the Carriers in North American??
Thanks in advance for any inputs
White_Hair said:
My friend has a unbranded X1, but don't know if can be compatible for the 3G network in Canada or USA? Anyone knows? Or North American ROM needs to be flashed on to enable 3G compatibility with the Carriers in North American??
Thanks in advance for any inputs
Click to expand...
Click to collapse
This is a very vexed issue. Please read the thread on 850Mhz 3G connection.
The short answer is:
1) "unbranded X1" is irrelevant. Use Start>Settings>System>Device ID to find the actual device version, ie. X1i or X1a
2) if your friend is lucky and the Device ID is X1a, then the device is capable of connection to the US/Aus/S America/S Africa 850Mhz 3G band
3) if the Device ID is X1i, then no such luck. This is a hardware issue, not firmware
Both will connect to the 2100Mhz UMTS band which is commonly used in cities, so if your friend never ventures outside cities the X1i should work OK for 3G
I have a question on this, when SE 1st released info about X1, they mentioned that it's Quand band GSM, GPRS, EDGE, UMTS/3G 850, 900, 1900, 2100. Why when they released it, they had to make 2 versions to support different networks? I think that this is stupid, they can do that for branded phones but not for SE unbraded phones, exactly like HTC and the HD, Diamond and Pro. We pay a lot of money for these for so at least give us full functionality... especially that these phones are more of business phones, so it's expected that people travel with these phones....or am i wrong about that?
thanks
I have an X1i in the US an it works flawless on the AT&T network with 3G (inc. HSDPA!!!)
rwholden said:
I have an X1i in the US an it works flawless on the AT&T network with 3G (inc. HSDPA!!!)
Click to expand...
Click to collapse
In what part of the USA are you?
George Knighton said:
In what part of the USA are you?
Click to expand...
Click to collapse
yeah that would be great to know.. Im in LA and i was looking to get one. I know that ATT 3G works both 850 and 1900, but depending on where you are there's one band stronger than the other.
Thanks for the info man.
I really appreciated.
Does anyone know what what band is Rogers 3G running on?
ianl8888 said:
This is a very vexed issue. Please read the thread on 850Mhz 3G connection.
The short answer is:
1) "unbranded X1" is irrelevant. Use Start>Settings>System>Device ID to find the actual device version, ie. X1i or X1a
2) if your friend is lucky and the Device ID is X1a, then the device is capable of connection to the US/Aus/S America/S Africa 850Mhz 3G band
3) if the Device ID is X1i, then no such luck. This is a hardware issue, not firmware
Both will connect to the 2100Mhz UMTS band which is commonly used in cities, so if your friend never ventures outside cities the X1i should work OK for 3G
Click to expand...
Click to collapse
White_Hair said:
Thanks for the info man.
I really appreciated.
Does anyone know what what band is Rogers 3G running on?
Click to expand...
Click to collapse
Please read and search before asking...
You answer is HERE (google search, first link displayed for "wikipedia rogers 3G": the band has always been there waiting for you to read it under "Services": Rogers 3G 850MHz) so you need the X1a, the X1i won't pick that band
Sorry to bother but this has been posted before (read and search before asking)
mrabie said:
yeah that would be great to know.. Im in LA and i was looking to get one. I know that ATT 3G works both 850 and 1900, but depending on where you are there's one band stronger than the other.
Click to expand...
Click to collapse
I'm also on ATT in Colorado (Windsor/Ft. Collins area) and get 3G almost all the time. I've been all over the state and have got 3G service just about everywhere, only rolling over to Edge from time to time.
Oh and I've got an X1i.
40oz2Freedom said:
I'm also on ATT in Colorado (Windsor/Ft. Collins area) and get 3G almost all the time. I've been all over the state and have got 3G service just about everywhere, only rolling over to Edge from time to time.
Oh and I've got an X1i.
Click to expand...
Click to collapse
Gr8 thanks for the info
yeah, I don't get any 3G in canada with my X1i.
I live in Vancouver BC, always in Edge.
I have had an occurence once, but only once! =[
I get HSDPA in the Dallas\Ft. Worth Area, and in Lawton, OK. Everywhere else I go I'm on Edge. And this is with a X1a on ATT.
ianl8888 said:
This is a very vexed issue. Please read the thread on 850Mhz 3G connection.
The short answer is:
1) "unbranded X1" is irrelevant. Use Start>Settings>System>Device ID to find the actual device version, ie. X1i or X1a
2) if your friend is lucky and the Device ID is X1a, then the device is capable of connection to the US/Aus/S America/S Africa 850Mhz 3G band
3) if the Device ID is X1i, then no such luck. This is a hardware issue, not firmware
Both will connect to the 2100Mhz UMTS band which is commonly used in cities, so if your friend never ventures outside cities the X1i should work OK for 3G
Click to expand...
Click to collapse
Nobody in the US uses 2100MHz, AFAIK, and I'm pretty sure Canada follows the same frequencies.
1900, on the other hand, is supported by the X1i, which is used by AT&T, Rogers, and Bell.
The downside is that if you're unfortunate enough to use T-Mobile, the network uses 850MHz only, and you're stuck with EDGE.
man guy this is too simple to find and you open a thread for this??!!??!?! STOP CLOGGING THE FORUMS!!!!!

i9000 has 850/1900 MHz 3g support?

Someone at my workplace is selling me his galaxy s but the model is not i9000 , its i9000l , i really wanted to buy the i9000 because thats the model most roms are build for , my provider uses 850/1900 MHz for 3g , does the original i9000 has support for 850/1900 MHz or do i have to buy the i9000l?
The international version doesn´t support 850 but it does support 1900.
What service provide are you with?
If Telstra you reeeeeeally want 850MHz operation.
jim5055 said:
What service provide are you with?
If Telstra you reeeeeeally want 850MHz operation.
Click to expand...
Click to collapse
movilnet in venezuela, latin america
Oops next time think I will check countries.
Sent from my GT-I9000M using XDA App

[Q] Plz guide me, which one is HD7s ? (T9292, T9295 or T9296) ?

i want to buy a second hand HD7s but cant actually figure out how to differentiate between HD7 and HD7s ....
perhaps the model numbers like t9292, t9295 or t9296 will help...
i have searched internet but there are a lot of contradictions :s
innocentrose said:
i want to buy a second hand HD7s but cant actually figure out how to differentiate between HD7 and HD7s ....
perhaps the model numbers like t9292, t9295 or t9296 will help...
i have searched internet but there are a lot of contradictions :s
Click to expand...
Click to collapse
Hi,
I know that the HTC HD7S is the AT&T version of the HD7 and I believe that it is a T9295.
If you can see a picture of the device it will have the AT&T logo in the top right hand corner of the device and under the kickstand is yellow.
I have the T-Mobile version HD7 and when I flashed a custom rom on the device it became the T9292.
I think the T9296 is the Telstra HD7 model.
There's no such contradictions...
innocentrose said:
i want to buy a second hand HD7s but cant actually figure out how to differentiate between HD7 and HD7s ....
perhaps the model numbers like t9292, t9295 or t9296 will help...
i have searched internet but there are a lot of contradictions :s
Click to expand...
Click to collapse
Ass xdrc45 posted:
Except for the AT&T HD7S or T9295 (Black case)
ALL the HD7 in the world are T9292 (Gray case)
The difference inside is only with the LCD screen:
T9292 is LCD (TFT)
T9295 is SLCD (more power efficient and has slightly more bright)
The rest on the phone is the same.
The HD7S only supports 1900MHz 3G!
That means no 3G outside the USA.
FAIL!!!!
husam666 said:
The HD7S only supports 1900MHz 3G!
That means no 3G outside the USA.
Click to expand...
Click to collapse
All the HD7 and HD7S are the same!!
Can you explain how can I have 3G with a carrier that uses GSM850? if "only support 1900MHz"
What do you think it mean the term "Quad Band"?
Answer:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100, HSDPA 850 / 1900 or HSDPA 850 / 2100
Don't talk about a phone if you don't really know it at all, if the carriers in your country don't support a frequency, that doesn't make it a "world standard" for all carriers...
faustolg said:
All the HD7 and HD7S are the same!!
Can you explain how can I have 3G with a carrier that uses GSM850? if "only support 1900MHz"
What do you think it mean the term "Quad Band"?
Answer:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100, HSDPA 850 / 1900 or HSDPA 850 / 2100
Don't talk about a phone if you don't really know it at all, if the carriers in your country don't support a frequency, that doesn't make it a "world standard" for all carriers...
Click to expand...
Click to collapse
dude seriously? wtf?
I own an HD7S and I'm outside the USA and I can't have 3G
HD7S specs:
2G Network: GSM 850 / 900 / 1800 / 1900
3G Network: HSDPA 850 / 1900
Click to expand...
Click to collapse
HD7 specs:
2G Network: GSM 850 / 900 / 1800 / 1900
3G Network: HSDPA 900 / 2100
HSDPA 850 / 1900 or HSDPA 850 / 2100
Click to expand...
Click to collapse
sources:
http://www.gsmarena.com/htc_hd7-3338.php
http://www.gsmarena.com/htc_hd7s-3887.php
gsmarena? pleeease!
husam666 said:
http://www.gsmarena.com/htc_hd7-3338.php
http://www.gsmarena.com/htc_hd7s-3887.php
Click to expand...
Click to collapse
And you believe gsmarena 100%?
Do you believe this?
Protection: Corning Gorilla Glass
Do you really believe we have Gorilla Glass on our HD7's? do you dare to use a hammer on your HD7?
Alert types: WAV ringtones
Can you use a WAV file as a ringtone? well.. you can't, only WMA and MP3 are allowed.
SIM: Mini-SIM
What kind of SIM do you use? mini-SIM? I use a normal size SIM card... not mini-SIM, nor micro-SIM
when I tell you I use 3G on my 850MHz GSM carrier (Tigo) is because I saw the 3G/H icon in my phones
also tested with 1900MHz GSM carrier (Claro) with "Free Speed Test"
http://www.windowsphone.com/en-us/store/app/free-speed-test/2a65fe94-4ead-e011-a53c-78e7d1fa76f8
The arguing here is, does your carrier support 3G? if so, maybe your phone is faulty... do you have someone known that has this phone on your location to compare? what radio version your phone has? bootloader?
give me more information... so I could help you better!:highfive:
faustolg said:
And you believe gsmarena 100%?
Do you believe this?
Protection: Corning Gorilla Glass
Do you really believe we have Gorilla Glass on our HD7's? do you dare to use a hammer on your HD7?
Alert types: WAV ringtones
Can you use a WAV file as a ringtone? well.. you can't, only WMA and MP3 are allowed.
SIM: Mini-SIM
What kind of SIM do you use? mini-SIM? I use a normal size SIM card... not mini-SIM, nor micro-SIM
when I tell you I use 3G on my 850MHz GSM carrier (Tigo) is because I saw the 3G/H icon in my phones
also tested with 1900MHz GSM carrier (Claro) with "Free Speed Test"
http://www.windowsphone.com/en-us/store/app/free-speed-test/2a65fe94-4ead-e011-a53c-78e7d1fa76f8
The arguing here is, does your carrier support 3G? if so, maybe your phone is faulty... do you have someone known that has this phone on your location to compare? what radio version your phone has? bootloader?
give me more information... so I could help you better!:highfive:
Click to expand...
Click to collapse
or maybe my carrier's 3G is 2100MHz which the HD7S doesn't support due to its hardware
http://www.htc.com/us/smartphones/htc-hd7s-att/#row-tab2
seriously, all I'm saying that most countries don't have 1900/850MHz 3G except the USA and some few others..
2100Mhz? WTF?
husam666 said:
or maybe my carrier's 3G is 2100MHz which the HD7S doesn't support due to its hardware
http://www.htc.com/us/smartphones/htc-hd7s-att/#row-tab2
seriously, all I'm saying that most countries don't have 1900/850MHz 3G except the USA and some few others..
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/GSM_frequency_bands
http://en.wikipedia.org/wiki/UMTS_frequency_bands
what carrier do you have? maybe I can check the info about them too...

Will the LTE work in Canada?

Hey guys!
I want to pre order the HTC one right now, it says it has 4g LTE; but im not sure, does LTE work everywhere now (multiple radios on board) or do the frequencies differ by regions
what I want to know is ; will this:
http://www.handtec.co.uk/htc-one-32gb-silver.html
Work wit LTE in Canada (Rogers, Fido, Bell etc..)
SS2006 said:
Hey guys!
I want to pre order the HTC one right now, it says it has 4g LTE; but im not sure, does LTE work everywhere now (multiple radios on board) or do the frequencies differ by regions
what I want to know is ; will this:
http://www.handtec.co.uk/htc-one-32gb-silver.html
Work wit LTE in Canada (Rogers, Fido, Bell etc..)
Click to expand...
Click to collapse
1.) the LTE Frequencies vary from country to country...
From HTC:
EU: 800/1800/2600 MHz
US (AT&T): 700/850/AWS/1900 MHz
US (TMO): 700/AWS MHz
US (Sprint): 1900 MHz
Asia: 1800/2600 Mhz
Click to expand...
Click to collapse
Now comes the great news.. as far as I know Rogers uses 2600 MHz . so EU Version from the UK WILL work!
99% confident
EDIT:
Maybe this Thread can be moved to Q/A
Rogers should have the phone next Friday....given that is when the pre-order offer ends
the one that available now, only has one band that matches rogers LTE band :2600
as far as i know and read from XperiaZ forum, (c6603 XperiaZ has almost same LTE band as ONE)
no one are able to get LTE.
if you need LTE. get it from your provider.
Montague said:
the one that available now, only has one band that matches rogers LTE band :2600
as far as i know and read from XperiaZ forum, (c6603 XperiaZ has almost same LTE band as ONE)
no one are able to get LTE.
if you need LTE. get it from your provider.
Click to expand...
Click to collapse
I could assume they have the US Model then? If they have the European one, all they need is the correct apns and maybe activate LTE over Settings.. DIAL *#*#INFO#*#* and then phone information ... and see if LTE is activated
voltron2k11 said:
I could assume they have the US Model then? If they have the European one, all they need is the correct apns and maybe activate LTE over Settings.. DIAL *#*#INFO#*#* and then phone information ... and see if LTE is activated
Click to expand...
Click to collapse
as far as i know
we tried everything possible can to test LTE
last hope wehave is flash the baseband when xperia zl came out.
http://forum.xda-developers.com/showthread.php?t=2106818&page=40
anyhow
2600 is still not very realible (although i heard that one verison of Note2 that only got 2600 got LTE)
Alright so I guess I'll hold off. What band I'd missing exactly
So not 100%sure the uk version will work on rogers LTE??
how many version of htc one is there
i checked the htc uk n canada site
all the specs are the same
so ibm kind of confused
should i get that from uk or not
cuz its about 150$$$ different
Montague said:
as far as i know
we tried everything possible can to test LTE
last hope wehave is flash the baseband when xperia zl came out.
http://forum.xda-developers.com/showthread.php?t=2106818&page=40
anyhow
2600 is still not very realible (although i heard that one verison of Note2 that only got 2600 got LTE)
Click to expand...
Click to collapse

Categories

Resources