Hey guys, having some problems with my g1 and bluetooth headset device. I'm using the JabraBT530, which connects fine, i can play mp3's and the audio is great, then when it comes to making a call, nothing...people apparently hear me, i can't hear them, the call screen reads bluetooth, i hear the "click" when a call is placed and everything but no audio, ive tried everything (volume of course) and no results. The call audio seems to only still come out of just the phone, it's driving me nuts, i've tried it on a different phone, works fine...any help please, this headset sounds real nice and i'd like to keep it but need to get it to work on the g1, thanks.
Related
Hey all,
I just picked up a shiny new set of Sony DR-BT10CX A2DP headphones, because I was sick of the huge Diamond headphone adapter.
I was hoping that the clever folks of xda-developers could clear up a few things for me, though.
Does A2DP support calling (microphone, etc), or should the phone switch the HFP/HSP when a call is made (or comes in)?
I ask because I'm getting bizarre behaviour...
If I'm listening to music and I make a call, the music mutes and I get my friend's voice through the headphones, but I have to speak through the phone.
If I'm listening to music and I receive a call, the music still mutes, but I have to use the phone to hear and speak.
Also, voice commands don't work through the microphone.
If the phone is supposed to switch into HFP from A2DP to deal with calling, this all makes sense (sort of...), but it doesn't explain why the profile switching doesn't happen.
I know there are already a bunch of topics about the Diamond and A2DP, but nothing that fits my situation. Since I'm using the Telus CDMA Diamond, I imagine that the other problems with A2DP were fixed (since I never have the problem of the phone playing music through the speaker instead of the headphones after a call), but it's still not perfect.
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
tOz666 said:
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
Click to expand...
Click to collapse
Here, use BTAUDIO to solve it
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
tOz666 said:
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
Click to expand...
Click to collapse
okay then try to follow these instructions :
1. Install BTAUDIO .cab to your phone
2. Activate your bluetooth headset, and put it in "find" mode
3. Goto your phones comm manager and turn Blueooth on
4. Now pair your headset with your phone
5. Start BTAUDIO
6. Follow the instructions on the screen and BAM, you are done!
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
I'm having an interesting issue, and none of the things I've found on forum search seem similar. I recently replaced my XT1053 Dev Edition due to a cracked screen. I have an Apple Earpod headset the used to work fine for calls...that is, I never really bothered getting the buttons to work, but the headphones output audio just fine, and the mic worked in calls so I could leave my phone in my pocket.
However, recently with the new phone, I'm having an issue with the headset. Now the mic doesn't work on phone calls. Phone audio and music output fine. The other weird thing is that, if I'm listening to music and someone calls, and I pick up the call with the headset in (then find the mic doesn't work), I'll unplug the headset to use the phone regularly...but when I do, the phone defaults to speaker mode for some reason.
Not sure if this is (hopefully) an easy software fix, but if anyone has insights, I'd love to hear them. I don't think it is the headphones, as they work in my wife's iPhone just fine.
Not compatible with the X. Sorry. ?
According to this reddit thread the mic will work if you hold down the center button while plugging in.
http://www.reddit.com/r/MotoX/comments/1x31i1/headphones_with_mic_that_work/
Actually, the iPhone headset DID work fine on my last Moto X before I had to replace it. I was able to listen to music and make calls with it, and the mic worked. I'm wondering why it doesn't work anymore, if there's some software fix to it not working.
Well, a while back there was a lot of posts saying it didn't work. If it did or does, great.
Bottom line tho, if you plug it in and it works, awesome. If it doesn't, then it won't.
No software will help. ?
adamkaye said:
I'm having an interesting issue, and none of the things I've found on forum search seem similar. I recently replaced my XT1053 Dev Edition due to a cracked screen. I have an Apple Earpod headset the used to work fine for calls...that is, I never really bothered getting the buttons to work, but the headphones output audio just fine, and the mic worked in calls so I could leave my phone in my pocket.
However, recently with the new phone, I'm having an issue with the headset. Now the mic doesn't work on phone calls. Phone audio and music output fine. The other weird thing is that, if I'm listening to music and someone calls, and I pick up the call with the headset in (then find the mic doesn't work), I'll unplug the headset to use the phone regularly...but when I do, the phone defaults to speaker mode for some reason.
Not sure if this is (hopefully) an easy software fix, but if anyone has insights, I'd love to hear them. I don't think it is the headphones, as they work in my wife's iPhone just fine.
Click to expand...
Click to collapse
Hi,
I'm using a blackberry headset and having no issues with audio/mic. But I'm having the issue where the phone defaults to speakerphone mode when unplugging the headset in the middle of a call. This issue didn't go away with wipe cache partition, factory data restore and a warranty replacement!
BTW, i'm on stock XT1053...