Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
tOz666 said:
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
Click to expand...
Click to collapse
Here, use BTAUDIO to solve it
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
tOz666 said:
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
Click to expand...
Click to collapse
okay then try to follow these instructions :
1. Install BTAUDIO .cab to your phone
2. Activate your bluetooth headset, and put it in "find" mode
3. Goto your phones comm manager and turn Blueooth on
4. Now pair your headset with your phone
5. Start BTAUDIO
6. Follow the instructions on the screen and BAM, you are done!
Related
Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
Not having experience of this unit this may be down to the individual headset and I hope some others will come in with experience of this.
Does the headset support both Headset and Wireless Stereo profile?
If it does not, the function may not be supported. I use a Promate PM-2600 and it supports both and when I have selected Wireless Stereo (this has to be done manually!) it works without problem when answering a call and passing back to music or video play.
Hope someone with information on this particular unit gets back to you.
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Click to expand...
Click to collapse
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
jazzman-t said:
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
Click to expand...
Click to collapse
I'm facing the same issue as well! Tried numerous hard resets and fixes you would have thought imaginable! Unfortunately the problem is still existent and it is freaking irritating when you have to press the play button to repair the headset. Worst still - when the music starts playing through the speaker after a call, everyone starts to look at you like you are some moron.
I do really hope there is a way to resolve the problem. Any new fixes i can try???
Senior members? Any help?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
I have this exact same problem on my Sony Ericsson HBH-DS220.
The bluetooth will disconnect after hanging up a phone call. I don't press anything on the headset, I wait for the other person to hang up. When it hangs up, it immediately disconnects the bluetooth headset.
Annoying!
Probably a problem with the bluetooth stack then. The stack is already known to be very buggy and have problems with lots of Bluetooth devices. Luckily, unlike the graphics card, it looks like HTC will be releasing a fixed Bluetooth stack at some point in the future. In the mean time, you are probably out of luck.
Bluetooth connection problem also with Tilt
I have a Plantronics 510 BT earpiece that for no discernible reason is connected one minute and gone the next too. I haven't been able to determine any combination of actions, such as ending a call as the culprit. I always have to make the connection manually between the earpiece and the Tilt also - it never links automatically when I turn the earpiece on like it did with my Treo 650. I've had this Tilt for 3 days and this is probably going to be a show stopper and make me return it to at&t before the eval period in spite of everything else good about the phone. I also have a Plantronics Pulsar 590 stereo headset that I haven't experimented enough with yet to know if the connection is as flaky. But the bottom line is - I'll be damned if I'm going to try to fiddle with establishing a connection and all the steps it can take while I'm driving down the road!
HTC CLUB
I FOUND THIS FILE AT HTC CLUB... Dont know if it will fix your problem or not .. but its for some BLUETOOTH BUG ... This File is For TYTN2...
Description From HTC CLUB:
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Hope This Helps
I was wondering if anyone has experienced the same problem I've been having. When I'm on a call using a "WIRED" headset (I know I need to get a BT headset) the call would be placed on hold without me touching the phone. Sometimes it would even place a call on its own. Whenever it would do this the Voice Speed Dial Screen would come on & beep too once in awhile. I don't have anything programmed in the Voice Speed Dial.
I believe the problem is coming from the plug from the wired headset that's connected to the phone. The headset that I am using is a HTC EMC220 Stereo Hands-Free Headset OEM. I tried wiggling the connector & it would either make a call or place the call on hold.
It's really annoying! Any fixes or suggestions?
Are you able to try a different wired headset? This would further help to identify the problem.
acboydston said:
Are you able to try a different wired headset? This would further help to identify the problem.
Click to expand...
Click to collapse
I only have 1 headset.
rdr408 said:
I only have 1 headset.
Click to expand...
Click to collapse
That is too bad b/c it sounds to me like it might the headset itself. Sorry I can not be more helpful.
Hey guys, having some problems with my g1 and bluetooth headset device. I'm using the JabraBT530, which connects fine, i can play mp3's and the audio is great, then when it comes to making a call, nothing...people apparently hear me, i can't hear them, the call screen reads bluetooth, i hear the "click" when a call is placed and everything but no audio, ive tried everything (volume of course) and no results. The call audio seems to only still come out of just the phone, it's driving me nuts, i've tried it on a different phone, works fine...any help please, this headset sounds real nice and i'd like to keep it but need to get it to work on the g1, thanks.
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.