Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.
Related
I've got an annoying problem with Bluetooth on my Kaiser. I'm currently using Motorola S9 headphones, I paired them with Kaiser for the first time and everything was working perfectly but whenever I turn Bluetooth on my phone off or pair the headphones to another device I cannot connect to tytn again. I have to delete partnership with headphones on TYTNII and then pair them again to be able to use the headphones. Everything is all right when I turn off the headphones and then turn them on again...connection is established automatically. The problem occurs only when Bluetooth on tytn was turned off or the headphones were used with another device. Is there a solution to this problem?
I've had some BT connecton problems too. I have the SonyDR-BT21Gs and if I pair them with something else, the only way I can get them to connect again is to initiate a phone call. Not sure why, but once the Hands Free protocol connects, the Wireless Stereo protocol also starts working. May or may not help you, though. FWIW, I also have the S9s and have had no problems with them, but I use them only with the phone while working out, so they may fall suffer under the same scenario as I described for the Sonys
Hey guys, having some problems with my g1 and bluetooth headset device. I'm using the JabraBT530, which connects fine, i can play mp3's and the audio is great, then when it comes to making a call, nothing...people apparently hear me, i can't hear them, the call screen reads bluetooth, i hear the "click" when a call is placed and everything but no audio, ive tried everything (volume of course) and no results. The call audio seems to only still come out of just the phone, it's driving me nuts, i've tried it on a different phone, works fine...any help please, this headset sounds real nice and i'd like to keep it but need to get it to work on the g1, thanks.
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
tOz666 said:
Hi, I have a TyTN II and i'm using a BT handsfree enabled car stereo. I can pair the phone with the radio, make calls and receive them, but I have problems with the microphone/voice sending, that is, when I'm making or receiving a call, shortly after responding, the other party can't hear me, or hears only clicks and distorted sound. I can hear the other party's sound without problems however.
I have made tests, calling to my home's answering machine, and during the call, after a short time the clicks and distort appear again, If I don't hang, sometimes the sound from the phone is fixed, only to be wrong again after a while.
It can't be signal problems, when I use the phone without the handsfree it works OK, and can't be the handsfree itself, it works well with my other phones.
I have tried all that I had read in the forums: pairing/unpairing, installing BT fixes, using KaiserTweak to tune BT settings... nothing worked.
Please help me, I really want to use the phone on my car, and can't use since I've got it...
any ideas? thanks in advance!
Click to expand...
Click to collapse
Here, use BTAUDIO to solve it
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
tOz666 said:
Thanks, but that did not solve the mic problem. I have tested a Motorola HF800 handsfree and strangely it works well with it... but not for my car stereo
Click to expand...
Click to collapse
okay then try to follow these instructions :
1. Install BTAUDIO .cab to your phone
2. Activate your bluetooth headset, and put it in "find" mode
3. Goto your phones comm manager and turn Blueooth on
4. Now pair your headset with your phone
5. Start BTAUDIO
6. Follow the instructions on the screen and BAM, you are done!
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
Hi
I have a P30 Pro, EMUI 9.1 .0.193 and I'm experiencing random disconnect of my BT headset during the call. I had a Voyager Legend and now a Jabra Supreme UC but the problem is still present.
Basically, during a phone call, randomly, the BT headset disconnect and the call is routed to the phone, or to another BT device.
The phone is very close to the headset to I don't think it is a problem of distance.
Does anyone have the same problem?
Thanks
Stefano
Yes, mine does the same with different headsets so I believe it is the phone, not the headset. I have to reboot my phone every week because Bluetooth will connect to my headset but only for calls, not for audio.
Sword Fish said:
Yes, mine does the same with different headsets so I believe it is the phone, not the headset. I have to reboot my phone every week because Bluetooth will connect to my headset but only for calls, not for audio.
Click to expand...
Click to collapse
I'm trying to understand if there is something around that could generate the problem... Random disconnections occur only when I'm at home at my desk, I have a bluetooth keyboard and mouse connected to the PC, probably there is interference. I never had disconnections when I'm outdoor or in the car...
I will try to pay more attention to this fact, maybe you can do the same to see any possible relationship of the problem with the sourrender environment.