please Help.....
my GPS work fine exept it dosn't wake up by any navigation software, all come with "no sat avalible ..please wait" also if i wait for 2h no way ....
if i reset (soft reset) my diamond touch and start any navigation program withen 2 min max it work directly and see the sat's , if i wait after menute or 2 all software don't see sat's at all !!!!!
it looks like my GPS in sleep mode and don't wake up by any navigation software call ??!!!
what i can do to make the GPS wake up by nav. software call ??
any help ??
Ray
ray_sami said:
please Help.....
my GPS work fine exept it dosn't wake up by any navigation software, all come with "no sat avalible ..please wait" also if i wait for 2h no way ....
if i reset (soft reset) my diamond touch and start any navigation program withen 2 min max it work directly and see the sat's , if i wait after menute or 2 all software don't see sat's at all !!!!!
it looks like my GPS in sleep mode and don't wake up by any navigation software call ??!!!
what i can do to make the GPS wake up by nav. software call ??
any help ??
Ray
Click to expand...
Click to collapse
have you try upgrade your radio?
Related
hi ppl, almost everytime i use tomtom on my triinty it seems to freeze, windows is ok when i press the ok button and i can click the little red icon to get tomtom up again but it thn requires a softreset for me to aquire a gps signal again!
ne ideas?
It's a known issue.
Try this, it should work
Hi guys,
I've been reading throught the forums and cant find any posts on this so if I've missed them I do apologise...
1) when in a phone call, after about 30 secs the screen completely switches off, this is very frustrating when speaking to a call centre because I can't choose a number, the only way to wake it up is to press the call answer button again (muting the call) and then pressing it again so that I can hear again, I've checked my settings and changed the backlight and the power off to 3 mins but it still happens after 30 secs approx.... any thoughts?
2) I have iGo Sat Nav 2006 which worked perfectly on my TYTN on a bluetooth gps receiver, now on the TYTN II it can't find the internal GPS receiver, am I supposed to map the receiver to a virtual com port or something?
Thanks for your time guys.
Terry
I think the Kaiser Twaeks utility in the forum sticky ahs an option for this, but if you want the specifics, try searching as I think it is just a registry setting.
I think the GPS is set up to use COM4, but I am not much help bsdies this. Searching should also get you some answers for this.
thanks, I'll take another look.
Actually... I have one other small problem that I've just noticed...
if you choose to lock all buttons except the power button the phone still switches itself on if you nudge the keyboard slider!
is there a way to turn that off?
thanks guys
Terry
As jgermuga said,
Kaiser Tweaks will solve your screen and power issues.
The internal GPS handler is on COM4 4800Bd, you should be able to configure this within your Mapping App.
Hi guys,
I just saw the screen disable function when I downloaded the Kaiser Tweak... sorry for posting guys...
Thanks for the info on the GPS, I'll give it a try later.
Cheers
GPS Problem
Farsquidge said:
As jgermuga said,
Kaiser Tweaks will solve your screen and power issues.
The internal GPS handler is on COM4 4800Bd, you should be able to configure this within your Mapping App.
Click to expand...
Click to collapse
I've just seen what I did wrong... I went into External GPS (thinking that this was a confliction) and changed the COM port to say "None", I have fixed it now.
I cant believe how dumb I've been lately... this phone is now fantastic, shame I was too stupid to realise! lol
Thanks guys for all your help... I'll wake up later
terryd1980 said:
1) when in a phone call, after about 30 secs the screen completely switches off
Click to expand...
Click to collapse
The workaround for this one is to rotate the volume dial...
Does anybody experience a lag when using iGO on the tilt? It seems that it lags to move when you do and when you make a turn, it doesn't make it till a few secs later?
Another way to power the screen back on after the 30 second automatic power-off occurs is to ummm... press the power button
Is there a way to keep the device (Tytn II) from going automaitcaly into standby mode when the GPS is activated regardless of the power setting?
On my older Trinity, whenever I used the GPS, the device would not go into standby mode no matter what the power setting was, and hence GPS will remain working. In other words, even when in power setting i had power off after 1 minute, if the GPS was being used (like Destinator) the Trinity was kept awake until I shut down Destiniator. But this is not the case with the Kaiser. Even if I have Destinator running, the devise will still go to sleep mode.
I use tomtom and when running it won't let the Kaiser go into standby automatically.
I do not know how to do it - but I know it MUST be possible because when TomTom is running on my phone it stays in live bright screen mode.
Bill
omar302 said:
Is there a way to keep the device (Tytn II) from going automaitcaly into standby mode when the GPS is activated regardless of the power setting?
Click to expand...
Click to collapse
I use AE Button plus, which is a button remapping program, but has additional functions that can be assigned to hardware buttons. Check it out. I have set up the PTT button that when I click it twice, it disables the auto-standby function but then the backlight doesn't turn off, so when I click it three times it turns off the backlight to save power. Works like a champ.
I too am wondering the same thing. When using iGo, my phone goes to sleep. Is there a reg setting, or an exception lit I can add iGo to, in order to keep phone awake?
I know it must be possible, since several other programs work that way. For example phone does not go to sleep when using IE, or Core Player etc.
I am also using S2U2, and have added iGo to the exception list there, but that only stopped the phone from locking when it goes to sleep.
Please help.
Thanks!
I solved my problem (actualy workaround) by using MortScript (Keepalive script).
omar302 said:
I solved my problem (actualy workaround) by using MortScript (Keepalive script).
Click to expand...
Click to collapse
Hi:
Thanks so much for your reply.
My screen will be darker after 10 sec.
I can set this again to 5 min. and after a few on and offs it will be back at 10 sec.
This is very annoying!
I thought i had found the problem, but it wasn't.
HKCU/ControlPanel/Backlight/BatteryTimeout setting up to 300. This is 5 minutes. It counts in seconds. But this isn't working.
Please can anyone help me?? A lot more have this problem.
I have the same problem, anyone the solution?
same problem here. I have call the helpdesk of htc they told me to do a hard reset. But it doesn't work for me. They also told me to return the phone when the problem stays afther a hard reset
vipinholland said:
same problem here. I have call the helpdesk of htc they told me to do a hard reset. But it doesn't work for me. They also told me to return the phone when the problem stays after a hard reset
Click to expand...
Click to collapse
i had the same "problem" and indeed, after a hard reset the backlight stays on 2 minutes as my heart wishes. i also use the the option to "auto adjust backlight. i have to admit it is strange...i don't see the connection.
KukurikU said:
i had the same "problem" and indeed, after a hard reset the backlight stays on 2 minutes as my heart wishes. i also use the the option to "auto adjust backlight. i have to admit it is strange...i don't see the connection.
Click to expand...
Click to collapse
yes, my backlight stay's also on for 1 minute(my setting)...hope the sound problem is also gone..
It is a bug in keypad locking
I think the backlight problem only occurs if you are using the keylock feature by pressing the end call button for a couple of seconds.
You can try it out yourself:
1) set your backlight settings to whatever you want and verify it works as intended.
2) Now just normally switch of your phone (not locking the keypad) by pressing the power button, switch back on and verify that the setting is still correct.
3) Then do a soft reset and again verify that the setting is correct.
4) Now lock the keypad by using the end call button (press a couple of seconds until locked).
5) Now unlock the phone and check the backlight settings: they are put back on the default values!! I guess it is a bug in the keypad lock functionality.
Btw, step 2) and 3) are just for verification, you may skip these to reproduce the bug.
Actually, if you use the lock feature of the device (for instance by enabling AutoDeviceLock in the registry, see tweak 18 in the stickied Diamond tweaks thread) the settings are also reset to the default values.
Is this the case for everybody? Or is it just me that it seems the locking feature contains bugs.
FYI...I had this issue from the start when I was running the Asia HK 1.34 ROM image. I flashed it using HardSPL and put the Europe 1.35 image on the device and have not had the problem since. All backlight values work normally as of now....I recommend this if your device is the HK ROM and you're having the issue. Not sure if it'll work for you, but it worked for me....
The solution is simply
You have to change DWORD LockLevel present in HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel\ to 0 (zero)
And now your time of standby don't change anymore
this is the problem:
My Kaiser (Htc Tytn 2) doesn't want sleep! when I try to turn off it (pressing stand-by button for 3 second) it say me the classic things (lose works etc..), i tap "yes" and the screen turn off, also the telephone lose all signals... BUT if I open keyboard the screen turn on!! The same if I press stand-by button one time!
I think the problem sterted after i installed G-Alarm... now I tried uninstall it but i've the same problem...
I've also tried to reset all, and hard reset all... it work fine but when i restore my backup the problem is it!
I think there is something of wrong in the registry... but I don't know what!
please help me...
thanks!