Database Develop

T-Mobile Wings WIFI Problum

my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?

maliks said:
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
Click to expand...
Click to collapse
have you tried accessing any other wifi connection outside of your workplace ? does it give you the same problem ?

Wifi problums
yes but i didnt face problum other places but on work place its working befor fine

problem with T MOBLE WING
I have the same problem , I even did try connect to my home Wifi it show connected ,but doesn't open to the website I want to ,can some one help,thanks

I had the same problem, I installed batterystatus, and checked the option to disable gprs when wlan is on, and now it works fine...
You don't need batterystatus to do this (the software just does it automatically for you), you can do it by yourself by disabling "data connection" in the connection manager whenever you turn on the wifi radio
-Hope it helps

t-mobile wing wifi problems
I had a similar problem with my wing. It would connect to unsecured WIFI networks and work flawlessly but when I connect to a secured network it would work for about 1 min then just hang while downloading a web page. If you device is doing this send it back to t-mobile and get a new one. This is what I had to do. hopefully you have a warranty.

I just got my T-Mobile Wing and I think I have the same problem. It just doesn't want to work with my WPA-secured Wi-Fi. When I switch WPA off, it works fine.
Did anyone else had a problem like this?
Called T-Mobile, they have nothing like that in their knowledge base.

I got this problem when i installed HTC 10 Button comm manager. I uninstalled it and WiFi works again.
Hope this helps

i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks

Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.

timace said:
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Click to expand...
Click to collapse
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.

ivanmmj said:
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
Click to expand...
Click to collapse
how exactly do i do this? is it what was explained about in the battery status menu and check marking the box 'disable proxy for wi-fi'...?

You can click on the little E or G on top and click on Disconnect.

ivanmmj said:
You can click on the little E or G on top and click on Disconnect.
Click to expand...
Click to collapse
i dont know how i ever survived without wi-fi....WOW....thank u

Thank Ayodeji13. He answered this in the 5th post. ^_^ But, yea, I've done the same thing before and was lucky to realize where the problem was coming from. Unfortunately, it didn't help me with the crappy wifi signal that my Wizard provided me. The wing, on the other hand, is MUCH better at this.

joking said:
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
Click to expand...
Click to collapse
Thanks mate... I too was having issues connecting to wifi... its kind of strange... it was connecting to my home network for sometime but later it suddenly stopped. It will connect to other networks but not to my secured network. Today I tried the setting you mentioned and surprisingly my phone connected to my home network... I wonder why because this setting should improve the performance and not the connectivity itself... Thanks again

you can add me to the list of people with wifi issues. I can't connect to my wireless router and I'm stand two feet away from it. It shows up but when I try to connect it says unavailable. I've done everything from turning the data off, to setting the power to best performance but it won't connect.

I need help... Whenever I connect it says I'm connected but actually I'm not. Yesterday I could view directions using live search but couldnt browse the web, not i cant do both. it gets stuck on the locating... part of loading the website. sometimes it gets to opening but the KB bar doesnt come up and it gives me some 500 internal error, or page doesn't exist. I cant do the best performance thing because im using touch it 2.3 rom and i dont have wifi status anymore.
WHY DO YOU HAVE TO REMOVE THAT STUF?!! URGH! I dont even have msn!
But anyways, can someone help me connect to the internet?...

TRY THIS
I have the same problem, i i manage to fix my wifi connectivity by editing the registry.....try this at your own risk.....but swear it works for me. i used total commander to edit registry and go to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager >
then you will see folders 0 - 8 or some only have 0 - 7 ,delete folders 6 and up ........ ( I JUST MOVE MINE instead of DELETING IT< I MOVE IT TO STORAGE CARD SO IF SOMETHIN GOFF UP I CAN JUST PUT IT BACK )....
SOFT RESET then try turn your wifi ON , connect to your network.... til me if this works for u guys...
i think the value of those folders are bum hehehehe thats why it wont connect......., after connecting to your wifi secured or not , it will create another folder and add those folders back by default...but this time the good settings lolz its worth a try !

Ok this is realy frustrating. My wing was getting on my secured home network and npw it dose not. I read all the post and have tried some (the ones that I could understand). I dont have the option under battery status to disable gspr or gpsr. And my system is vista 64 so total commder dosen seem to work for reg settings(edits). I can conect to unsecure networks but I cant to my hone (secure) network. I have in the past but it dsent ssem to work now?

Data connection never drops

I was away for a week and upon returning my Tilt is exhibiting some strange behavior that's different from before.
Basically, data connections never drop. So once the first ActiveSync, use of Pocket IE, etc, occurs, the connection stays on forever. For example I just checked my phone and the connection has been active for over 16 hours (the phone sat hibernated for most of that time).
I could have sworn that previously, the connection would drop after some period of inactivity. The little H with the signal strength on the title bar would change back to the triangle antenna. But no more. I tried with HSDPA off too and saw the same problem (except I got a little 3G instead of a little H above the signal bars).
I even hard-reset my Tilt and this did not fix it.
What can explain why my data connections used to drop on their own before but suddenly stopped doing so? Basically, my phone used to behave as if the "disconnect after" KaiserTweak was enabled (even though I never enabled it) but it's now behaving as if "always on" is enabled (even though it is not enabled).

So you know about Kaiser Tweak - have you loaded Kaiser Tweak and set the setting? and it still behaves this way?
I cannot explain it - but if Kaiser Tweak fixes it do you still need an explanation?
Bill

whk said:
So you know about Kaiser Tweak - have you loaded Kaiser Tweak and set the setting? and it still behaves this way?
I cannot explain it - but if Kaiser Tweak fixes it do you still need an explanation?
Bill
Click to expand...
Click to collapse
I agree with Bill... If You have a solution that will work even though you haven't had to use it before, why not fix the problem a new way instead of Dwelling on the problem.
Maybe Check this. In Phone Goto Menu -> Data Tab. Check your Check Box on Disable data connections when device enters Sleep Mode. Soft Reset and see if that will fix it for you.

Thanks for the suggestions guys.
I didn't want to fix this with the KaiserTweak because it comes with a disclaimer that (a) it might not work with all programs and (b) is might prevent simultaneous voice and data calls. The latter seems more problematic; maybe this is not an issue with 3G/HDSPA (and only with the older data technologies)?
I can't find a data tab anywhere. I have a Tilt with stock ROMs... is the menu and data tab available somewhere? I'd like to try that suggestion.

tai4de2 said:
Thanks for the suggestions guys.
I didn't want to fix this with the KaiserTweak because it comes with a disclaimer that (a) it might not work with all programs and (b) is might prevent simultaneous voice and data calls. The latter seems more problematic; maybe this is not an issue with 3G/HDSPA (and only with the older data technologies)?
I can't find a data tab anywhere. I have a Tilt with stock ROMs... is the menu and data tab available somewhere? I'd like to try that suggestion.
Click to expand...
Click to collapse
If you don't have that tab the option has been "hidden" by the ROM Makers. So Though there is a way to get to it, It is One I don't know.
I would suggest then getting Schaps Advanced Config, Is what I use to put my Data Connections to off after three minutes. I haven't had any problems with simultaneous lovin' with Voice and Data.

Well I turned on the KaiserTweak for this and it works. Maybe I had it enabled before and didn't realize.
One thing I notice is that I always get the "connecting to" balloon pop-up when a connection is being established, even if I tell it to hide. So there's one annoyance, but it's better than having my battery drain down due to the constant connection.
Interestingly this never drop behavior coincided with the switch-over from the behavior of the 3G icon that goes to H only when a connection is established, to always showing the H icon. Could these 2 behaviors be connected somehow, and due to a change on AT&T's side?

You can turn off the notification by going to settings -> sounds and notifications -> notifications tab ->event = connection established, uncheck "display message on screen".

I was just experimenting and I found that enabling the "disconnect after" KaiserTweak prevents simultaneous voice and data. If a voice call is going, I cannot establish a data connection and if a call comes in the data connection drops. If the KaiserTweak setting is not enabled, I can get simultaneous voice and data.
My phone always shows the H icon.
It seems I have to choose between the stock setting of "connection never drops, and drains battery" and the KaiserTweak setting of "can't get simultaneous voice and data connections". Ouch!
Does BandSwitch use a different way to handle forcing the disconnections, or is going to boil down to the same registry setting that KaiserTweak uses for this?

Popup can't make gprs connection

Hi
First we had Vodafone which let the gprs connection always on.
Now we switched to KPN which lose connection after some period. That's OK by me, cause we use 2 connections.
1 for work and 1 for internet.
The program in use decides which connection to make.
But big problem is a a popup which state it's not possible to make connection.
In portrait there's a button to ignore it, but in landscape the button is not there.
Is there a registry tweak to turn this popup completely off??
I'm already jusing the kaiser tweak program and i'm jusing mobile 6.1 (collega's who have the 6.0 version of mobile are experiencing the same problem)
tnx in advance.

Found this threat something almost similair
http://forum.xda-developers.com/showthread.php?t=334718
But in WM6.1 (my version) the cennection lost notification check is grayed out. (and not checked) So why do i keep getting connection (GPRS) lost bubble (searched for popop )

gprs/3G disconnects after a while

Hello,
i have the problem that my gprs/3G disconnects after a while when my phone is on standby.
Iam not sure if it is a provide or a Phone problem.
Anyone a hint for me ?

Hi,
Using Advanced Config 3 I stumbeled upon an option in 'Data connections': GPRS disconnect: Enable button and timer. The default option is button disabled. What this exactly does I do not know, but it seems related to your question.
Mine was set to Enable button and timer (I can't remember setting this option but anyway). I think you need to check the register for the length of the timer.

thanks for the anser, ive played with advanced config option already, but it changed nothing But i will give it another chance now
But: if iam the only one who has that problem, i may be a problem of the provider. I have German Eplus and the umts isnt realy good there...

Navigation software opening systematicly GPRS internet connection !?

Hi,
I use iGo8 and TomTom 7 and with both of these applications, everytime I close them I can see that they openend the GPRS connection (internet mobile)... my internet has no limit of use so it's not much of a money issue but the battery is going down pretty fast beacause of this background running data connection ...
Is there something I could do ?

Install nodata.cab from modaco

prdic said:
Install nodata.cab from modaco
Click to expand...
Click to collapse
Thanks for the reply. I tested the software you pointed out. It's a solution except that its pretty boaring to have to lock the internet connection everytime you need to use the GPS (for it's 15 to 20 times a day with a new adress) ...
Any idea on how to disable the connection only for the GPS software ?

EDIT : even with all connections disabled with nodata, the gsp still manages to open the connection !

I had exactly the same problem. I tried the same cab as you and it didn't work... I tired creating a bogus connection and selected it to try and stop the GPRS connection as someone else advised but a GPRS connection kept on opening itself...
Do what I did and flash a stock HTC ROM over your SFR one... It completely solved the problem for me.
You might want to dump the old SFR one first for guarantee reasons.

I use igo8 and it never turns on the GPRS connection.
I don't know if this is the cause, but can you check if assist GPS is ON or OFF?
Mine is OFF which is the default behavior...
If you don't have it, you'll need an app like "Advanced Config" in order to be able to see and change the A-GPS behavior

--Double post--- Ignore

This was the problem ideed. I have direct access to the A-GPS ON/OFF option in the parameters and it was ON. Switched it to OFF and the navigation software don't start the data connection now !
Thanks !