Hi,
im cant find on xda-developers solution for my problem :-(
my WM "X2H_WM6.5_v4.8" cant start. sometimes wizard show number for typing PIN and light off...
so i followed this http://forum.xda-developers.com/showthread.php?t=298613, but no working :-(
i get to bootloader screen IPL and SPL 2.26 , when a connect USB (in bootloader) is displayed USB on screen. i downloaded wizard_love rom (as in tutorial) a i tryed to upload to wizard, but romupdateutility say me, that device is not connect :-((
i have windows 7, flash by VMware workstation, where i have installed XP
can anybody help me pls?
(sorry for my English )
Related
Hi,
Windows vista will no longer recognise my XDA Mini-s which is stuck at the three colour screen.
Activesync doesn't work with Vista - I have installed Windows Mobile device centre but it cannot recognise my device?
Can anyone help please?
If your phone is stuck at the boot loader (rainbow screen) then yes, active sync and what Vista uses will not recognize your phone. Just make sure that with the USB cable plugged in it reads USB in the bottom left. You should be able to run a ROM update utility on it now and flash T-Mobile 2.26 Ship onto it (I'm assuming this is a G3 device and CID unlocked. If you aren't CID unlocked then flash whatever official carrier ROM for your phone. The key is to get the IPL/SPL to a 2.x version (with 2.26 from T-Mobile being the preferred).)
BTW: You may need to turn off your phone, then plug in the USB cable and then get back to the boot loader (by holding the camera key when turning it on).
Hope that helps, and good luck.
You should not flash your device from Windows Vista. Vista and Active sync have be working weird I have heard. Which Vista Edition are you using because I have found Ultimate has no problem for me.
I would suggest flashing it in WinXP or Win2k for better results.
hi, just wanted a confirmation...is it possible to flash up to a wm6 on the wizard (noticed faria just came out with one) using windows vista ultimate? I'm reading that people are having problems here and there, but for some it's working, for others it's not.
windows vista mobile center is working fine syncing information with my current rom (faria 3.3)...
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
Hi,
i have a problem, everytime i try to flash, i get a question on my phone"do you want to allow unrecognized programms to...." if i press yes the tri-color display appears, but the programm on my Laptop doesnt progress (stand at 0%)and there isnt any progressbar on the trinity , i can just see the tri-color display, after about 30 sec i get a notification on my laptop that the connection is lost?!
what do i wrong or what can i do bether ?
Run the app your running twice.
First time it triggers the tri-color screen and failes.
Next time it patches the device.
should i run it again when im allready in the tri coulor screen ?
i habe tried im think but than it cant even connect to my trinity ?
could vista be a problem ?
what about this cid unlock thing ? is this nececcary for a vpa compact gps ?
Hi,
i solved the Problem, so i just can report that all these Programs like, rom update, radio update ... dont work with vista (on my laptop )
but i took my other laptop with win xp and everything worked fine, know i have the Lalle win 6.1 rom an my trinity everything works fine
the trinityguides faq is the best thing i know !
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5
Hello,
so my T-Mobile MDA III (german) = HTC Blue Angel ist not working any more. I tried to apply the latest update form T-Mobile but it failed.
Now I am stuck in the bootloader. It says: "Serial" above and "v2. 08" below. When I insert it into the cradle "Serial" changes to "USB".
I cannot hard or softreset the phone. It stays in the bootloader. When I connect the MDA III to Windows 2000 or Windows XP it is not recognized anymore by the device manager. In windows 2000 no driver is being installed and under windows XP (with SP3) "unknown device" is being installed. No chance to manually change to any other driver. Also tried new windows installation.
Tried with Active Sync 3.7 (original from t-mobile), 4.2 and 4.5.
Flash via SD Card is not possible, if I understood the posts correct. Further mtty does not detect anything at the usb port. BaUpgradeUt.exe and MaUpgradeUt_noID.exe fail.
Any help greatly appreciated.
Fixed mine....
Exactly the same problem with mine Thought I had blown it up. Left it for 5 mins then connected my USB(still no activesync connection and no lights or nuthin) but selected the MaUpgradeUt_noID.exe again and it just worked.
Hope yours works too.
No it doesn't help.
Hi! I know that it was long time ago, but how did you manage to solve the boot-loader problem?
I didn't.
Same problem with 2.06
Restart
It really helps. Restart and try again:good:
Had the same problem right now.
Reflashed MultilangROM - didn't help.
Reflashed Radio ROM - all's fine now