Related
为什么这里的中文rom这么少，Jack梁能不能做个简中rom？
如题，希望Jack兄可以做个简体中文rom，方便我地大陆机友，多谢先！
alex75721 said:
如题，希望Jack兄可以做个简体中文rom，方便我地大陆机友，多谢先！
Click to expand...
Click to collapse
Please use English language on this forum, you'll get the answer sooner, thank you!
alex75721 said:
如题，希望Jack兄可以做个简体中文rom，方便我地大陆机友，多谢先！
Click to expand...
Click to collapse
这里不是中文的论坛，最好用英文。我觉得你可以发给jack短信问一下你的问题。
其實我鐘意繁體中文多d~~~
there are quite a few chinese sites offer simplified and traditional x1 roms, you cant expect always to see non-english roms in an english forum
Please respect this forum and post in English.
At least give a translation from Google Translate. I don't use Simplified Chinese myself and it's just too time consuming to make another version of rom. Maybe you should try the following:
http://bbs.ivgappc.com/forumdisplay.php?fid=34&page=1&sid=dmZsqO
http://sebbs.it168.com/
http://bbs.pdafans.com/forum-166-1.html
Pls forgive his stupid words
alex75721 said:
如题，希望Jack兄可以做个简体中文rom，方便我地大陆机友，多谢先！
Click to expand...
Click to collapse
我想大陸現在的英文程度不會差到這地步吧..
Windows Mobile 的英文是很淺白宜明的了...
Actully, you can use CE-Star on your Jack's rom or Touch-IT 4.5 rom.
They both support Chinese now.
在Custom rom上用CE-Star會有bug,所以還是學好英文吧!
有需要中文版嗎 ?
目前我就是用Jack的英文ROM, 再配合CE-Star來使用,
而CE-Star支援繁中、簡中, 這樣就很好用囉。
為何一定要Pure Chinese Version ?
这是所有希腊给我。
I thought my computer had gone Pete Tong!
English please
choijensen said:
我想大陸現在的英文程度不會差到這地步吧.. (為免誤會,我不是台灣人)
Windows Mobile 的英文是很淺白宜明的了...
Actully, you can use CE-Star on your Jack's rom or Touch-IT 4.5 rom.
They both support Chinese now.
在Custom rom上用CE-Star會有bug,所以還是學好英文吧!
Click to expand...
Click to collapse
Not too bad, but some of them are too lazy to read English, and some are stupid enough to post a thread in Chinese on an English forum assuming that everyone can read.
jackleung said:
At least give a translation from Google Translate. I don't use Simplified Chinese myself and it's just too time consuming to make another version of rom. Maybe you should try the following:
http://bbs.ivgappc.com/forumdisplay.php?fid=34&page=1&sid=dmZsqO
http://sebbs.it168.com/
http://bbs.pdafans.com/forum-166-1.html
Click to expand...
Click to collapse
English menu inside the machine I be able to understand，BUt the network settings have not "China Mobile". so no internet access
alex75721 said:
English menu inside the machine I be able to understand，BUt the network settings have not "China Mobile". so no internet access
Click to expand...
Click to collapse
access point: cmnet
http://x1roms.jimdo.com/x1-rom全收录/
you can go here to download the chinese ROMs, but i guess it is based on the initial itje ROM which had the "My contact card bug", I've already used 3 versions of the ROM and all have the same contact card bug and also MSN messenger does not work... rest all is good.
I am studying in China so use the chinese ROMs to improve my chinese, only problem is that the X1 is not officially released in the main land so there is no pure simplified chinese edition ROM. and one last thing, only the initial beta 5 and 6 did not have the china mobile connection settings but after that all of itje's ROMs have china mobile settings! so no problem there.
为什么要在这些老外面前丢我们华人的脸？英语会难打吗？
Just try to manually configure the network settings maybe?
superweijie said:
为什么要在这些老外面前丢我们华人的脸？英语会难打吗？
Just try to manually configure the network settings maybe?
Click to expand...
Click to collapse
Actually, the answer is everywhere if he just search. All he need is the provision.zip that included the carriers in China. Many people just getting tired to answer this repeatedly for newbie who don't care to search in this "developers" forum.
Hi my friend...
Here it is an English forum, so one of the rules is not to talk in any another languages other than English...So stop posting in Chinese, please...it is a kind of respect to this community...
If you know little about English, just visit the several popular Chinese PPC forums like pdafan.com ...where there are many warm-hearted guys who transfer the updated new roms from XDA to Chinese forum...like me
I have to admit...There are fewer new roms in Chinese, so are in Other languages...
If you like using google products, you will find more features when you set the language in English and select your region to be the US. English is the world-wide language, most of the software initially come out in English...then Chinese,German, Japanese etc...
If you do like trying new stuffs, learn your English first...
Good luck!
No offense! please....
Please go to bbs.it168.com to find the chinese roms, you can find a lot of good roms there,it is the best place to find every thing in chinese can be used on your X1, if you are looking for something cool and new,here is the right palce!
Hi there,
i searched here in the forum but most of the threads i found for my problem didnt really answer my questions or they where not specific enough.
I got a X1 (bought it in Germany), i want to change the OS language to chinese. I want to give this phone to a chinese friend of mine.
Most important would be:
1. Change the GUI in Chinese
2. Chinese input methods (reading/writing)
3. Stable and fast would be nice^^
Actually i want to change the whole phone like its a x1 bought in China
What i understood is that the Hong Kong x1's comes with integrated CE-Star and a chinese GUI.That sounds as the easiest approach to my goal.
Anyway, what would be the simplest way to get this done?
As i am pretty new to all this..please dont bomb me with too much technical stuff. A brief description or a FAQ or something else would be greatly appreciated.
Thank you for your help and patience.
Deadshotx
deadshotx said:
Hi there,
i searched here in the forum but most of the threads i found for my problem didnt really answer my questions or they where not specific enough.
I got a X1 (bought it in Germany), i want to change the OS language to chinese. I want to give this phone to a chinese friend of mine.
Most important would be:
1. Change the GUI in Chinese
2. Chinese input methods (reading/writing)
3. Stable and fast would be nice^^
Actually i want to change the whole phone like its a x1 bought in China
What i understood is that the Hong Kong x1's comes with integrated CE-Star and a chinese GUI.That sounds as the easiest approach to my goal.
Anyway, what would be the simplest way to get this done?
As i am pretty new to all this..please dont bomb me with too much technical stuff. A brief description or a FAQ or something else would be greatly appreciated.
Thank you for your help and patience.
Deadshotx
Click to expand...
Click to collapse
Look in the ROM section and flash a Chinese (CHT?) rom, like Jack's?
I think (looking at the way you ask the question), you haven't flashed a rom before. I recommend to read the sticky's in the rom section first, so you know what to do. In short:
1. HardSPL (if you don't know what that is, read this)
2. Flash ROM via windows (X1_customRUU), or SD card method
I wil check it out. I shlould be able to do that.
I mean i checked some other threads, but i had no idea where to start.^^
Thx for starters and a fast answer...
Regards
Deadshotx
For the Chinese rom, I recommend hylu's WM6.5 because it is stable and include Chinese input method like Zhuyin and Changjie
http://forum.xda-developers.com/showthread.php?t=501949
About the CE star, X1 selling CHT and ENG version in Hong Kong. The ENG version will include CE star(seem with reg key) but CHT version will not include.
If you flash English rom, you can also install some plug-in then your English rom can display Chinese word and typing Chinese by using Zhuyin and Changjie
Here is the Chinese plug-in
http://www.studiokuma.com/wm/?section=support
Are your friends using simplified Chinese or traditional Chinese?
Hope I can help you.
If you want stock rom, check the rom section for CHS (simplified Chinese) or CHT (Traditional Chinese).
For custom CHT rom, I heard hylu's is quite good. For custom CHS rom, you may want to take a look at it168.
Mine is just English w/ CE start built in.
ngji3e said:
For the Chinese rom, I recommend hylu's WM6.5 because it is stable and include Chinese input method like Zhuyin and Changjie
http://forum.xda-developers.com/showthread.php?t=501949
About the CE star, X1 selling CHT and ENG version in Hong Kong. The ENG version will include CE star(seem with reg key) but CHT version will not include.
If you flash English rom, you can also install some plug-in then your English rom can display Chinese word and typing Chinese by using Zhuyin and Changjie
Here is the Chinese plug-in
http://www.studiokuma.com/wm/?section=support
Are your friends using simplified Chinese or traditional Chinese?
Hope I can help you.
Click to expand...
Click to collapse
Thanks to all for the info. Your answers are very helpful
My friend is using simplified chinese as far as i know.
I guess istart working, if i come up with some problems i post em here
Regards
Deadshotx
Hi there
so i managed to Hard-Spl my phone. I am having a tough time now...i dont know which rom i should use.
Preferably a CHS rom. So i am thinking i should either hylu´s or jackleung´s.
What do you guys think? I am really not sure what features are good or not. There are some where i dont even understand what this features might bring ^^
Anyway, the phone has not to be super highly customizable. Anyway, all i want in the end is a phone running in all chinese (simplified) and some nice features and some customization...
I hope you can help me make my choice. Thx in advance
Greetings
Deadshotx
Hi I am searching for Windows Mobile 6, 6.1 oder 6.5 in Englich the language Pack from helmi didnt translate the os .. The os is not bootable after apply
Need Help
yeah, the only rom the language pack works for, is helmi's own wm6 rom.
since there are no other wm6.X roms in german on this forum or anywhere i looked, i will start development for my own wm6.5 in german. personally, i don't want a german rom, but since i am one of just few german senior members here, and people request those roms, it would be pretty nice to have them floating around, but at the moment i just can't spare the time to translate a rom (plus i've never done it before and have to read a hell lot before i can do it).
so you might wanna stick with one of the good wm6.5 builds, like xplode's, or sun_dream's, or swampy's
wmobile in german to english or spanish
Hi! I´m new in the forum, please i need some help, i have a qtek 9090 bought in germany so it has a windows mobile in German. Can you help me to change the ROM to an english or spanish version.
The info is:
ROM version: 1.40.01 GER
ROM datum:03/10/05
Radio version: 1.12.00
Protocol version 1337.42
Extended ROM version: 1.40.750 GER
Model: PH20B
Platform: PocketPC
Can you explain me step by step or suggest me a page wuere i could find some instructions, i have another problem too, I don´t have a usb cable for it, please help me
hi, welcome to the forum!
1. i wouldn't have posted the imei, if i were you. it does not help is the process and is rather private information. maybe you want to edit that, since it is none of people's concerns, it would be like posting your phone number in clear text.
2. it is no problem at all, "switching" languages. it might not be as easy as flipping them like on a normal mobile phone, since you need to flash a different rom, but it is easily doable. but before i explain that, let's go to #3
3. you problem is, that you don't have a usb cable. you really need a usb cable or cradle to flash another rom, which again is necessary to get another language. so your first task would be to get your hands on a cable or cradle, before that, you can do nothing about that. have a look at ebay or e-shops in your country or region.
i will not go into detail now, because the entire process of flashing the device must seem awfully theoretical for you at the moment, but to give you something to read:
-=here=- you can download the different wm2003 roms in different languages.
-=here=- you can find newer roms, since you are not restricted to wm2003, maybe you also want to concider wm6.5 for nicer optics, finger friendliness and third party app compatibility.
-=here=- you can find information on how the upgrade process works in detail.
and finally -=here=- you find a lot of information for beginners with the device.
please make sure to first get a cable, then please post back, and we will discuss further questions about the actual process of flashing.
with best regards,
Chef_Tony
Thanks!
Thanks a lot !
I couldn't find any help until I arrived here, ok so I'm going to work in the USB cable, and I'm going to read all the articles.
I will post back as soon as i get it, thanks for your help and congratulations for the forum Chef_Tony.
Vanpliego
i try to use the differet rom on my pro 2, beacuse the offical rom is so slow
i hear some method can display chinese and input on the english rom, how can i do or found the information??
help me please~
i have used cd star to input and view chinese (apparently once you install the software, it installs the font so you can read chinese). I used it on WinMo 6.1 and have not yet install in my tilt 2 yet (but will do it soon) so I presume it will work without any issue.
http://www.mobem.com/products/CE-Star.php
当然,看我写的
check this out. i wrote that
http://www.missroc.com/20090715/final-chinese-on-tp2.html
PUTALE said:
i have used cd star to input and view chinese (apparently once you install the software, it installs the font so you can read chinese). I used it on WinMo 6.1 and have not yet install in my tilt 2 yet (but will do it soon) so I presume it will work without any issue.
http://www.mobem.com/products/CE-Star.php
Click to expand...
Click to collapse
i try the suit but many Traditional Chinese can't be display normail
zdp011 said:
当然,看我写的
check this out. i wrote that
http://www.missroc.com/20090715/final-chinese-on-tp2.html
Click to expand...
Click to collapse
i need the Traditional Chinese anyway thanks for your help
use the font from Hong Kong official ROM.
It supports CHT almost perfectly. but remember you have to change your regional settings to Chinese(Taiwan) or Chinese(Hong Kong).
E-Mail me if you want a cab.
For the Chinese input, tell us which IME you use.
anyway
its same
安装那个我提到的雅黑字体
那个支持繁体显示
只要能支持繁体输出显示之后
繁体输入的话,随便安装你喜欢的繁体输入法即可.
in this , http://ricky119.com/chinesesupport/ ,you can find many useful resources , Chinese(Asia Language) support for Non-Chinese ROM
of course it support both CHT and CHS
final jzhyok give me a method to slove problem , it is good method!!!!!
thanks so much all of you!!!!!!^^
This is what I always use....very small and works really well (it adds support for Japanese and Korean characters as well)
http://www.studiokuma.com/wm/?section=support
I dont really need the input method so I just use the Droid.cab only. You can try them out
thank you
I got my Tilt 2 today. i am still learning how to install the softwares on my cell phone. thank you guys for your advices on this forum.
Is is possible to extract the Chinese Font and input method from the Official HKCSL_WWE ROM? (CSL is a phone company in Hong Kong)
I am using the Offcial HKCSL_WWE ROM on my Pure now but I would like to use some nicely customize ROM find here.
The only only problem is I need Chinese. I wish I can put the Chinese font and input method to some cooked ROM.
Thank you for any reply,
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
yup...probably like what you said..
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
OCedHrt said:
From my experience with it so far, not really. The input has not been successfully installed on top of any of the existing cooked roms.
You will have to cook your own rom using HK CSL CHT input. I have not seen any of the cooked roms on here providing the CHT input.
Click to expand...
Click to collapse
So, how do I extract the input method? Do I do that in nbh or the on the phone?
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
Where can I found Ricky's chinese font? Is it a add-on or need to be cooked in?
Thanks every one
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
BumAround said:
agree!
can you help me out? Looks like Ricky's MSYaHei v6.0 cannot be installed on the new Manila 2.5.2011.30300 (Leo 2.54) anymore...any updates, please? I've lost Ricky's website address. thanks.
Click to expand...
Click to collapse
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and uploaded the files i used
http://www.sendspace.com/file/08vu3l
mindofmike said:
These are the cabs I use to get Chinese display on my Topaz. Seems to work fine with the new manila. First, I install the font cab, then without rebooting, install the NLS cab. Then reboot. Sometimes it takes 2 reboots to get working, but so far so good. These cabs only provide support for viewing Chinese, not typing it. You'll need to find something else for that. There are several input methods floating around on xda if u look.
Good Luck
Click to expand...
Click to collapse
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Anybody knows Ricky's website, please?
BumAround said:
Anybody knows Ricky's website, please?
Click to expand...
Click to collapse
http://ricky119.com/chinesefont/?replytocom=983
BumAround said:
Thank you both. I wonder if the file(s) provided will work on the latest/newest Sense 2.5 (Manila 2.5.2011.30300) with Leo 2.54? Because the Ricky's MSYahei6 no longer work. In the meantime I do not need chinese input, only need the chinese display/support.
Click to expand...
Click to collapse
hmm..
im using that same latest Manila [energy rom feb 1st release]
and the cab i provided in the post works for me..
dont know if it will work with Leo 2.54 tho. you can try. it works on my Topaz :]
Chinese input
QQpinyin(QQ手机输入法)
website:http://mobile.qq.com/py/
sougou(搜狗输入法)
http://shouji.sogou.com/
Baidu(百度手机输入法)
http://ishouji.baidu.com/input/
i use QQpinyin, i like the skin of it
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
RayYung said:
Thanks everyone for providing the Chinese support download.
Get back to the original question, can I extract the Chinese font and input method from the ROM?
Thanks,
Click to expand...
Click to collapse
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
queer~dude said:
i've been trying not less 100 time of flashing roms with most chinese font and input...i finally found that the Ricky's made "chinese font" solved my display problem on viewing chinese characters
Click to expand...
Click to collapse
The display problem is very easy to fix. There are many fonts out there that work on Manila. If that's what is being looked for, I think some solutions have already been posted in this thread.
However, if you're trying to get the original HK CSL HTC CHT IME installed, then I am not aware of any solutions yet.
mindofmike said:
What everyone is saying is that even if you successfully extract the files, you couldn't install them into a cooked ROM. You would need to create your own ROM and add the chinese input when you cook it. I have tried some cabs in XDA that claim to let you use the htc chinese input and fonts, but they never worked for me. In fact they totally screwed up my phone and I had to hard reset.
That being said, you could (potentially) dump the rom you are using, then import it into a kitchen and cook your own custom ROM. There are lots of cooking tutorials on this site if you look around, but be prepared to invest considerable time and energy into the learning process. And to be honest, I think the other viewing and input methods listed in this thread are superior.
Just my 2 cents.
Click to expand...
Click to collapse
Actually, that is a good idea ^^. I'm going to try dumping and adding. I do have the extracted inputs.
yunchikan said:
i use ricky 6.5 chinese cab too. [tho i edit the cab and put another font in it, cuz the one ricky had was bold and i didnt want bold ^^;]
heres the procedure i use everytime i flashed a custom [energy] rom::
1. install TF3D2.Chinese.Taiwan_20090917_xmatrix.cab [by xkaiser] to convert most words to chinese. no need to reboot after install. n u will notice most things r displayed as squares now [install this if you want your manila to display in chinese, proceed to #2 if installed, if not installed, no need to do step 2]
2. IMPORTANT copy the files in smsfix.zip to \Windows root folder [this is because the language pack deleted the sms notification files, so if you dont add these files back, you will not receive any sound or vibrate when a new message comes in]
3. install RickyMSYH6.0Full__.cab follow the installation and soft reset when it asks to reset
4. install HTC Rhodium A4 IME V2.8 WVGA.cab [this is a chinese input that im currently using, it was designed for a touchpro2, so the keyboard is pretty much alike as the one we are using. tho... this one doesnt have handwritten input :[ ] this software is in simplifed chinese, but it works fine with typing traditional and hong kong characters
i dont know if installing these cabs will have any side affects though, i have no problem with it. been using them for awhile now, and they work with all the energy roms ive flashed [including the latest topaz 2011 build]
do it on your own risk :]
i zipped and upload the files i used
http://www.mediafire.com/?n2mjzmmzzdz
Click to expand...
Click to collapse
hi can you try to reupload the files as i couldnt download
I have successfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
mindofmike said:
I have sucessfully installed this Chinese IME (official ezinput) on the NhatHoa ROM using 23529 and manila 2011 3030. I did first install Chinese fonts and a NLS cab... (u can look for my post earlier in the thread.)
Seems to be working fine so far. Better backup before you try it though. I have heard it cant be uninstalled very easily.
Click to expand...
Click to collapse
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
damn good!!!
i love the official chinese keyboard interface and this is what i've been looking for since i started to flash english cooked rom!!!
BumAround said:
thanks for the heads up. now, after the install into a WWE ROM, will one still be able to input Chinese or English by switching the keyboard/input method or something?
Click to expand...
Click to collapse
Actually can use both English and Chinese directly with a keyboard button and also by changing sip... working great so far. Also both English and Chinese dictionaries seem to be working ok.