I have a sprint touch diamond, just found its lock code thanks to you all and this forum. However when i go to setup screens there is no MDN option, I see the MSID and can change it but no MDN, does anyone know what the problem is.
this screenshot is the "user profile" under setup
http://forum.xda-developers.com/attachment.php?attachmentid=233958&stc=1&d=1254597376
this one is "advanced", where the MSID is
http://forum.xda-developers.com/attachment.php?attachmentid=233957&stc=1&d=1254597376
Related
I know this has been asked before but 20 min with search and google has only come up with half answers so far.
I was wondering if there was a place that had all of the operator configuration settings. Finding the GPRS t-mobile USA settings are eas, but what about MMS, voicemail (seems not to work with generic world english ROMS), etc?
I have been looking through the ROMs but have found no easy way to rip them out for use with another ROM.
sorry for the probebly stupid post.
Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Note: the previous examples assume you've named the connection T-Mobile GPRS
This worked for me once and than I couldn't get it to work for me again. I also have a .cab file which sets this to work perfectly on the Wizard for TMO USA. I've uploaded to me.
Lot's of people complain on this site that people don't read previous posts. I've read for hours and not found what I need. That's why I'm answering you r post
rambo6 said:
Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Note: the previous examples assume you've named the connection T-Mobile GPRS
This worked for me once and than I couldn't get it to work for me again. I also have a .cab file which sets this to work perfectly on the Wizard for TMO USA. I've uploaded to me.
Lot's of people complain on this site that people don't read previous posts. I've read for hours and not found what I need. That's why I'm answering you r post
Click to expand...
Click to collapse
great write up! but unforunately, i tried it on my 8525 and it didn't work. i'm still not able to get MMS.
i assumed this would work on the 8525 as well.
Wizards are funny that way sometimes things work other they don't, at least that's what I have been able to understand from my experience with mines. About MMS settings I've noticed that if I do a hard reset and mess around with the settings a bit, and leave the MMS settings for latter that no matter how many times I put them in they won't work, now if I do a hard reset and the first thing I do before settings anything else up is do my MMS and my GPRS settings using the exact same settings everything works perfectly, and another thing I usually just punch in the settings myself, I haven't had one of those network settings cab work for me yet. In other words if you've tried everything else and no dice, you might think about doing a hard reset and setting up all these things as soon as you can.
masr1979 said:
Wizards are funny that way sometimes things work other they don't, at least that's what I have been able to understand from my experience with mines. About MMS settings I've noticed that if I do a hard reset and mess around with the settings a bit, and leave the MMS settings for latter that no matter how many times I put them in they won't work, now if I do a hard reset and the first thing I do before settings anything else up is do my MMS and my GPRS settings using the exact same settings everything works perfectly, and another thing I usually just punch in the settings myself, I haven't had one of those network settings cab work for me yet. In other words if you've tried everything else and no dice, you might think about doing a hard reset and setting up all these things as soon as you can.
Click to expand...
Click to collapse
yep thats right, i had to hard reset my 8525 and the .cab worked just perfect... that's weird
TMO USA GPRS Configuration stop working after July 23, 2007
rambo6 said:
Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Click to expand...
Click to collapse
I have used the setup above for years in my 8125.
Unfortunately, after July 23rd, TMO USA updated their system and my GPRS settings stop working for some reason...
Does anybody has the new GPRS configuration for TMO USA?
I struggled with this today as well until I tried Gateway "216.155.165.50" not "216.155.165.050". All is well now.
I set my phone (AT&T Tilt) to block all outgoing caller ID and would like to be able to selectively turn this off by adding the usual #code prefix (usually *82 in the US) to the dialed number. Apparently, once you set the tilt to do this, you can not unblock the number without going back into phone settings and changing this setting. I spoke to AT&T who could not offer an answer or solution and they sent me to HTC who said it is a feature of WM and there is no solution unless the carrier provides one. I am never sure if AT&T support really knows the right answer - has anyone else dealt with this - is there any other code/#prefix that works or any other possible solution
Thanks!
Not sure if the codes are network dependent, but on Vodafone in the UK i dial *31# plus the number to dial. This will show my number for this call only.
HTH
Did you read the manual??? NO!!!!
Go to phone, selectect menu, select options, go to services tab, select caller ID, click get network settings, then select the one you want. AT&T does not support *69 & *82 on the Tilt.
Hey - how do you think I set the device to block caller ID Einstein? How about you read the post next time
Hi,
Does somebody know if it is possible to show your outgoing Caller-ID per category?
I know the defaults options for Caller-ID are "all, none, contacts only".
If it is possible to set this per category, has somebody already seen a piece of software which handles this?
I have already looked around in the forum and on Google, but couldn't find something like that.
Some phrase in Google told it could be done with Vito QuickContacts, I downloaded it but did not find such option, maybe it was for other phones only...
Thanks.
I would also like to know this, it would be Veeeery helpful
The "contacts only" option is not working for me, it's the same like "no one". I would like to see at least that option working.
But, Caller ID is a feature from a mobile operator, and honestly I can't see how one can control it via software.
Settings - click on blue Phone icon
select Services tab
select Caller ID
Click Get Settings
wait....
then shows options:-
Everone,
No one,
Only to Contacts
probably the best you can do
You could write your own program to handle contacts for you, and include setting such as these
ok, would somebody provide that program for some of us, not programming saavy.
Is there any software available for TyTn II by which i can change or disable my number to others? Please rep.
settings/ blue phone icon/ services/ caller id/ get settings/ select who you want to see your, some, all, etc... No software required. Hope this helps
Within the UK you can dial 141 before the number.
This way you can set individual contacts as private.
swtaltima said:
settings/ blue phone icon/ services/ caller id/ get settings/ select who you want to see your, some, all, etc... No software required. Hope this helps
Click to expand...
Click to collapse
That would be to easy. Don't you have a more complicated solution, or maybe some over priced software you know of that would work?
My phone doesn't have those settings.
el_plebillo said:
My phone doesn't have those settings.
Click to expand...
Click to collapse
They probably need to be enabled via a reg edit or advanced config
depending on the net work there is a code that you can dial in front of the number that would block your number from showing up on the caller IDs of other phones.
ex
for t mobile is #31#
for att is *67
for sprint its normally blocked by defualt
verizon i believe is *67
but if there was a program that would allow you to change or spoof your caller ID among other people it would be nice to have
ithehappy said:
Is there any software available for TyTn II by which i can change or disable my number to others? Please rep.
Click to expand...
Click to collapse
Software to change your number ...
NO .... but there are services you can use to change how your number appears to others. "It's called Spoofing"
Software to disable your number .... (where are you located?)
No need for software .. chinese chicken's "how to" is correct (if you live in the states.) You also have the option to press the "green dial key" as though you were going to make a call, then "Menu", then "Options", then "Services", select "Caller ID" and hit "Get Settings", and then select either "everyone", "no one" or "only to contacts", and ok. soft reset to ensure the settings will stick. Hope this helps
So on my X this is working fine (still on 4.4.2), but on my fiance's X (4.4.4), it's not remembering her choice as a default number. For instance, as her contact, I have multiple numbers on her favorites list. When she goes to click on my contact box to call me it'll ask her to "choose number", she then clicks "remember this choice" and chooses one of my numbers. You'd think that would be enough to choose my default number and store that into memory, but when she goes to call me again the same dialog to "choose number" pops up again. Any idea for a fix for this? Pretty annoying. Glad I don't have that issue but hoping to be able to fix hers. Any help would be greatly appreciated.
Sent from my Nexus 7
Jersey846 said:
So on my X this is working fine (still on 4.4.2), but on my fiance's X (4.4.4), it's not remembering her choice as a default number. For instance, as her contact, I have multiple numbers on her favorites list. When she goes to click on my contact box to call me it'll ask her to "choose number", she then clicks "remember this choice" and chooses one of my numbers. You'd think that would be enough to choose my default number and store that into memory, but when she goes to call me again the same dialog to "choose number" pops up again. Any idea for a fix for this? Pretty annoying. Glad I don't have that issue but hoping to be able to fix hers. Any help would be greatly appreciated.
Sent from my Nexus 7
Click to expand...
Click to collapse
I don't know of a fix, but I can suggest a work-around. If your name were "Billy", and she has multiple numbers listed under that single contact, a potential work-around is to remove all numbers except the main one she wants to call you on. Then she can create a second contact, for instance "Billy Phone" and store the rest of the numbers there.
On any normal occasion where she will be calling the regular number, she will just select "Billy", but if for some reason she needs to call you at one of the other numbers, she will select "Billy Phone" and choose which number.
Not a solution, but a viable work-around. I'm curious if this behavior is inherent to 4.4.4? I don't know since my carrier is still on 4.4.2.
samwathegreat said:
I don't know of a fix, but I can suggest a work-around. If your name were "Billy", and she has multiple numbers listed under that single contact, a potential work-around is to remove all numbers except the main one she wants to call you on. Then she can create a second contact, for instance "Billy Phone" and store the rest of the numbers there.
On any normal occasion where she will be calling the regular number, she will just select "Billy", but if for some reason she needs to call you at one of the other numbers, she will select "Billy Phone" and choose which number.
Not a solution, but a viable work-around. I'm curious if this behavior is inherent to 4.4.4? I don't know since my carrier is still on 4.4.2.
Click to expand...
Click to collapse
Yeah not sure if it's a 4.4.4 issue or just for her specific device. Hadn't seen anything posted about it before, so not sure. I just know I don't have the issue on 4.4.2.
Sent from my Moto X