Related
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
sounds like a corrupted partition try repair ext file systems if that dosent work youve got to format partition and reinstall all apps.
btw does youre fat32 partition work?
te5ter said:
Sorry if this has been adressed before, but i did use the search and i cannot quite figure out what to do next. I might have dropped my phone the other day, and since then none of my apps run from the SD becase it thinks that it was ejected. So, i wiped and installed a clean JackXrom again, and it was fine for about 20 min, then phone locked up, and when i restarted, i get the same problem. Should i format the partitions on the card perhaps? I was trying to avoid that, so any work around would be helpfull.
Latest radio, spl. Class 6 8 gig SD card.
Thanks.
Click to expand...
Click to collapse
If it only happened once it shouldn't be an issue, but if it does it wouldn't hurt to format your ext.
In recovery
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -r /system/sd/*
I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory
te5ter said:
I tried repairing my ext, no luck.
Whenever i try to mount in recovery console i get error : No such file or directory
Click to expand...
Click to collapse
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?
AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
if you can remember the start and end of youre ext partition i think you can do this in parted by typing print then note down the start and end then type mkpartfs primary ext2 start - end
te5ter said:
I cant recall which tutorial i fallowed, but it was all done through the terminal or recovery. Could you possibly point me to the right thread?
Click to expand...
Click to collapse
Here you go, follow the second section.
http://android-simplicity.blogspot.com/2009/08/how-to-6-how-to-partition-your-sdcard.html
Everytime i try to mount in recovery i get "mount: mounting /dev/block/mmcblk0p1 on /sdcard failed: device or resource busy"
I'm lost.
pull your battery our for 30 seconds or so. remove your sd card then reinsert it and then try again. if that doesnt work then do what the others guys have said and try to reformat your sd card and start from scratch.
AdrianK said:
Sounds like you need to delete the partition and make a new one, as it can't be read. If you're going to use parted from you're phone then you'll probably have to start over and recreate fat (and linux-swap if you had one) too. If you're using paragon or Gparted you should be able to recreate just your ext.
Click to expand...
Click to collapse
Actually, with Parted you can just rm and mkpartfs any partition you want without affecting the other partitions.
I bit the bullet and just formated all the partitions.
Thanks anyways guys.
My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.
Lordsmiff said:
My advice for next time or any body else reading would be to download a live CD for ubuntu or fedora or similar and boot your PC off that - it's graphical and v. easy.
Or just dump windows altogether and go for linux ;-)
Smiffy.
Click to expand...
Click to collapse
Yeah Gparted is amazing problem is then you have to walk the person through downloading, burning the image...which can be painful.
This is still happening, fresh format on sd card partitios and a wipe and clean install of Jacxrom.
Bad sd card? Or the phone?
JACxROM [v1.3]
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??
sorry
Sorry I posted this in the wrong place, I will move it.
rberger13 said:
I am attempting to flash to this ROM. Everything seems to go as describen in other posts, but when I power up the phone, I never make it past the splash screen. Any thoughts??
Click to expand...
Click to collapse
Bump, dead SD card?
partition corrupted anyway to recover?
I need help please!
I was running cyanogen 4.0.3.1 just installed today morning then changed theme to enoch 1.12 the newest one that worked fine. Updated the browser to loccys Then installed the HTC music and when finally rebooted the phone it was working fine until I noticed I had none of my apps on the sdcard.
All I have is syste/app folder which runs internally I think everything else does not work. It's like my sdcard is not in.
I shutdown rebooted and waited. Then removed sdcard rebooted and inserted the card one fully powered on and it is saying it wants to format it.
I get home turn my ubuntu system on and it detects it as a ext3 partition yet nothing inside. and now no fat32 partition or linux-swap.
anyways to recover or am I SOL?
hey everyone, im not usually quick to ask for help but i am absolutely frustrated and stuck.
trust me ive searched and read everything i need to and its just not working for me
i have a 8gb micro sd class 6 card.... everything was fine and working perfect until i did a nandroid backup
then my card started having errors when repairing ext filesystems
so i put the card in my computer and formatted it.
then i deleted and repartitioned the card
then i did the command in the recovery console to fix the filesystem error
reflashed the radio image
none of that is working for me
i have another 4gb class 4 card and its working perfect for me
but ever since my 8gb did a nandroid backup, the roms wont load at all and i get stuck in a boot loop with the second htc splash screen
PLEASE HELP THIS IS DRIVING ME MAD!!!! thanks a bunch in advance!!
im using jacxhero v2.1
and i use cyan 1.4 recovery img
After you partition in Recovery, you don't need to fix filesystems... just exit Parted and type upgrade_fs in recovery console to upgrade to ext3.
deanna619 said:
hey everyone, im not usually quick to ask for help but i am absolutely frustrated and stuck.
trust me ive searched and read everything i need to and its just not working for me
i have a 8gb micro sd class 6 card.... everything was fine and working perfect until i did a nandroid backup
then my card started having errors when repairing ext filesystems
so i put the card in my computer and formatted it.
then i deleted and repartitioned the card
then i did the command in the recovery console to fix the filesystem error
reflashed the radio image
none of that is working for me
i have another 4gb class 4 card and its working perfect for me
but ever since my 8gb did a nandroid backup, the roms wont load at all and i get stuck in a boot loop with the second htc splash screen
PLEASE HELP THIS IS DRIVING ME MAD!!!! thanks a bunch in advance!!
im using jacxhero v2.1
and i use cyan 1.4 recovery img
Click to expand...
Click to collapse
this is a fault with the rom, the nandroid backup shouldnt cause a bootloop.
did you make sure the partitions are in this order?: FAT32, ext, linux swap?
can you see the card on your pc?
yes i did those 3 in order, ive done it several different times
i make sure that i do the upgrade_fs to convert to ext3
everything goes well when i partition and i can see the sd card in my computer. but for some reason i cant get past the splash screen with this memory card... my other one is working perfect, and so was this one until i did the backup thing
when i flash, it finishes and i reboot and get stuck after the HERO splash screen, the first time it shows the little android guy and then the screen goes black and i see the same spash screen again but with no android
what happens if i repair filesystems after i repartitioned??
deanna619 said:
yes i did those 3 in order, ive done it several different times
when i flash, it finishes and i reboot and get stuck after the HERO splash screen, the first time it shows the little android guy and then the screen goes black and i see the same spash screen again but with no android
what happens if i repair filesystems after i repartitioned??
Click to expand...
Click to collapse
it wont hurt to repair it, but it seems that the problem is more likely the hero rom. something is causing the rom to bootloop. did you wipe before you flashed? try that if you havent.
also, set up adb using the stickys in this thread, then use
Code:
adb logcat
when it starts to boot. that way i can see whats happening thats causing it to bootloop
yes i definately wipe before flashing. i still think its the sd card since my other sd card works with the same rom
ill try out the abd thing... ive seen posts about it but never really read into it.
thanks for the advice! ill be right back with the results
right now that i tried again, i cant get passed the tmobile g1 screen... seems to be stuck =[
the card was formatted and partitioned and then i booted (the rom is already flashed on here, i just took out my 4gb card and switched it out for this one so i shouldnt need to reflash should i?
now i deleted all partitions in recovery mode and rebooted....
i got both splash screens hero with android and then the htc splash... now it went to a black screen and has been like this for about 5 or 6 minutes
with my 4gb card it shows the two splash screens and then the black screen comes on for no more than 30 seconds and then the phone loads
deanna619 said:
yes i definately wipe before flashing. i still think its the sd card since my other sd card works with the same rom
ill try out the abd thing... ive seen posts about it but never really read into it.
thanks for the advice! ill be right back with the results
right now that i tried again, i cant get passed the tmobile g1 screen... seems to be stuck =[
the card was formatted and partitioned and then i booted (the rom is already flashed on here, i just took out my 4gb card and switched it out for this one so i shouldnt need to reflash should i?
Click to expand...
Click to collapse
well the hero builds put some apps and configuration files on the ext partition. if your 4gb card has those on it, then you probably wont have to.
Can you see the partitions on your computer?
no i dont know how to see partitions on my computer
deanna619 said:
no i dont know how to see partitions on my computer
Click to expand...
Click to collapse
if your using windows, format the whole card to FAT32 and put it in your card reader to see if it shows up as a removable drive.
what are you using to partition the card? Try flashing another rom that doesnt need extra partitions (such as cyanogen) and see if that rom can see your card as well.
if it doesnt detect it, then your card may have gone bad
=[ looks like i got a bad card....
i appreciate you two helping me out! wish it could have worked... i guess im just gonna pick up a new card
this rom wont even load when i dont have an SD card in it... and when the phone is loaded with my 4gb card, if i take it out, the phone freezes
weird....
deanna619 said:
this rom wont even load when i dont have an SD card in it... and when the phone is loaded with my 4gb card, if i take it out, the phone freezes
weird....
Click to expand...
Click to collapse
like i said, important system files are on the sd card. you cant remove the sd card without crashing it. if you want a rom that you can use without an sd card, use JF or Cyanogen's rom. The hero roms have too much stuff to fit it all in the internal memory of the phone
what are those important files on the sd card?
are you talking about the partitions or something else?
if its something else like hidden files or something, then maybe thats what i need to fix my 8gb
deanna619 said:
what are those important files on the sd card?
are you talking about the partitions or something else?
if its something else like hidden files or something, then maybe thats what i need to fix my 8gb
Click to expand...
Click to collapse
they arent hidden, but thats what i was trying to say. after youve formatted your card, wipe and reflash the update. it will put those files on your card automatically.
they are located on your ext partition.
if you use adb, you can see them in
/system/sd/app_s
to get it to work, put the freshly partitioned sdcard into the phone.
press home+power to get to recovery. wipe the phone. flash the update (jachero2.1)
when it installs, it will find the ext partition and do it manually
So, I got a 4GB sdcard the other day. It came out of a blackberry a friend of mine was using. I formatted the card to FAT32 with the utility in windows 7, and everything seemed to be fine. I downloaded ext2fsd to be able to copy my ext partition to my new card. I followed the directions from the website about mounting the ext partition.
After I performed the steps above, my sdcard became unusable. I tried to take it out, and put it back in my card reader, and I get an error saying windows needs to format the drive, if I try to format it, it doesn't work. I've tried in gparted as well, and also get an error. I even tried from Amon's revorery, and sdparted in the console. I don't get errors with the latter two, but my card reader still says it's RAW.
I know that was lengthy, but I'm trying to figure out anymore steps to take, or if I should just throw the card away.
Thanks
ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?
crypysmoker said:
ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?
Click to expand...
Click to collapse
Yeah, I know you're not trying to be rude, but I know I need 3 partitions. I'm pretty aware of the way a sd card needs to be partitioned. I've tried everything mentioned. I think it's about time to call it quits. It's a class 2 card, so I don't think that's the issue, and I can't format in Ubuntu, or Windows. Oh well I suppose. Thanks.
You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
cholito said:
You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Click to expand...
Click to collapse
I forgot to include this in the original list of things I tried, but I did give it a go. It is telling me the card is write-protected even though the switch on the adapter is set to the unlocked position. I've also tried it with a different adapter. I appreciate everybody's input.
well try using parted commands to write from block 0 to the last block and partition the whole thing as fat32
is that not working?
did you tried partitioning with RA 1.2.3 recovery?
@B-man007
I haven't tried writing the whole thing to FAT32 with parted. I'll give that a try tonight (don't have the card with me).
@cholito
I'm using RA 1.2.2, I think the script is the same, so I don't know that it would make a difference if I was using that or 1.2.3
I just bought a new SD card, 4 GB, class 4. And my old one was only 2 GB, not sure what class. And i'm not sure what steps i need to do to get everything i had on my old one and get everything to be the same as before without any problems.
My sd card is partitioned and has linux swap with ext 2 converted to ext 3.
Phone is rooted and running MLIGN-Hero 2.5.5 and i think my apps are on my sd card, but not 100% sure.
And also i'm using Amon Ra's Custom Recovery v1.2.2 and used that to partition my sd card.
Do a nandroid back-up. After you do that, on your PC, copy the nandroid folder from your SD to your desktop. Then, format and partition your new 4 gig SD. I would make the ext3 and linux-swap partition the same size as you had them on the 2 gig SD. Finally, copy the nandroid folder on your PC desktop to the 4 gig SD, put it in the phone, boot into recovery, and run a nandroid restore. Everything should be good.
Just incase you need it...
Code:
parted /dev/block/mmcblk0
mkpartfs primary fat32 0 xxxx
mkpartfs primary ext3 xxxx yyyy
mkpartfs primary linux-swap yyyy zzzz
quit
upgrade_fs
reboot (or) reboot recovery
thanks, i really appreciate it. i'll try it out now. i'll make another quick reply when i'm done to say if everything worked out fine.
BlackElvis79 said:
Do a nandroid back-up. After you do that, on your PC, copy the nandroid folder from your SD to your desktop. Then, format and partition your new 4 gig SD. I would make the ext3 and linux-swap partition the same size as you had them on the 2 gig SD. Finally, copy the nandroid folder on your PC desktop to the 4 gig SD, put it in the phone, boot into recovery, and run a nandroid restore. Everything should be good.
Just incase you need it...
Code:
parted /dev/block/mmcblk0
mkpartfs primary fat32 0 xxxx
mkpartfs primary ext3 xxxx yyyy
mkpartfs primary linux-swap yyyy zzzz
quit
upgrade_fs
reboot (or) reboot recovery
Click to expand...
Click to collapse
ok this is weird, when i go to to the nandroid backup it says "Error : Backup not performed!"
EDIT: nvm i fixed it. i just had to reboot.
EDIT: nvm again, it worked for a little while then the same error message showed up again.
didnt work, i got stuck in a boot loop at the hero loading screen, im just gonna use my old one for now then ill have to go back to the store and trade in the 4 gb sdcard for a new one and try again.
wtf?!?! now none of my apps work! as soon as i open it and then try to click on something inside the app i get a force close (the one where it doesnt have the option to "wait")
nvm i just did a nandroid restore from my old sdcard.
sumtime nandroid can't finish if there is not enough room left on the card
maek_it_happen said:
sumtime nandroid can't finish if there is not enough room left on the card
Click to expand...
Click to collapse
hmm... makes sense. i'll try and remove some stuff from my old sd card then backup again.
I don't believe nandroid backs up your SD also. Just internal flash. So you'll need to find another way, I believe you can do this through adb
Basket Lotioner said:
I don't believe nandroid backs up your SD also. Just internal flash. So you'll need to find another way, I believe you can do this through adb
Click to expand...
Click to collapse
sorry for being a noob here but what is adb again? i completely forgot.
Here
Basket Lotioner said:
Here
Click to expand...
Click to collapse
thanks but umm... i think i'll just stick to my 2 GB sdcard, lol. way too confusing stuff and way too much to read and understand. i'm a major noob when it comes to android and i know i would screw alot of stuff up with that, i always do. thanks for the help anyways though.
AnThNeE said:
thanks but umm... i think i'll just stick to my 2 GB sdcard, lol. way too confusing stuff and way too much to read and understand. i'm a major noob when it comes to android and i know i would screw alot of stuff up with that, i always do. thanks for the help anyways though.
Click to expand...
Click to collapse
u could jus use nandroid and back up for root users , format and partition ur new card using amon then just restore the nandroid and back up !
maek_it_happen said:
u could jus use nandroid and back up for root users , format and partition ur new card using amon then just restore the nandroid and back up !
Click to expand...
Click to collapse
well, i wish it was that easy. i think my new sdcard is broken anyways, when i did it the first time, i got stuck in a boot loop. then i went back to recovery, got rid of my ext 3 i think or something like that, and then i put it in my computer and formatted it, and then did it all over again, and then this time my apps didnt work, actually, wait i think i know what you mean... hmmm.... brb i'm gonna try what you basically said. sorry for all the typing, i have a habit of over typing things, lol.
well, ran in to a major problem. now everytime i try to do anything i get an error saying to run _________ (<--whatever it says) via console. so is my sdcard broken? cause i really dont feel like going out and buying a anew one.
maek_it_happen said:
sumtime nandroid can't finish if there is not enough room left on the card
Click to expand...
Click to collapse
how much room does nandroid need?
Hello.. as the title states im having issues.
ok, so i recently rooted my g1when i saw Gnav was live (w00t) and all was well until i decided to partition my pqi class6 4gb partitioned as listed below.
ok heres the kicker.. every thing is fine until i start installing apps then it will just lock up then when i try to restart i get a black screen after the cm loading screen and thats it.. only way to get it back to life is to delete then repartition the card...... i reflashed, repartitioned and factory reset about 10 times and finally gave up and wiped card back to full fat32 and no swap or ext3 then reflashed cm 4.2.5 and have been running flawless for a week now so i have narrowed it down to my sdcard... any ideas on WTF could be going on here?? are pqi cards no good maybe?? it was real cheap i caught a deal on it about a year ago.. something like 2x4gb for 15 bucks shipped. I have never had any file loss when using it just for storage or anything.
heres how i had the partitions layed out
0 3459
3459 3971
3971 4003
i also tried ext4 aaaand out of desperation cm 4.2.4 with no luck
any insight greatly appreciated, I didnt know if i should post this here,in development or accessories but its a Q and im lookin for a A
Thanx
-Bop
Well I had the same issue with my phone, but I switched over to Amon-RA recovery and it does SdCard partition for you, You just have to enter the number's you want and it does the rest in recovery mode. This is how to flash it on this page. http://forum.xda-developers.com/showthread.php?t=566669.
errrm i dont think the recovery is the issue, i really like cm 1.4 for the fact that it has a console
thanx.
Next
Amon_RA has a console too....
if you dont want to use that, then format it through parted with 1.4
Amon_RA's does the same thing but its much easier (he basically added automated scripts to the 1.4 recovery, since it is actually based off 1.4)
Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.
BopChie said:
Thanx.....but that's not my issue, please thouroghly read my opening post.
Thanx again
Also I should probably add one note here....it don't lock up as soon as I install a app.... I can get 3 to 5 apps in be4 what's explained in my OP happens.
Click to expand...
Click to collapse
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue
B-man007 said:
Well get us a logcat of when that crash happens. It seems like bad partitioning but get us a logcat and we can narrow down the issue
Click to expand...
Click to collapse
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again
BopChie said:
ok, i dont know how to do so and is this something i can fetch after the os is crashed via recovery console and dump to sd??
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
also.. take a look below, am i not doing something right here???
i did all the partitioning in parted as below
after removing all partitions i have a 4003MB chunk
mkpartfs primary fat32 0 3459
mkpartfs primary ext2 3459 3971
mkpartfs primary linux-swap 3971 4003 <---maybe i should try 4000 and not goto the end of the sd??
then after i'm out of parted
upgrade_fs to get ext3
tahnx again
Click to expand...
Click to collapse
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com
BopChie said:
and as i said i am a root newb here.. so i have to ask... if i do a nandroid backup and save the backup to my pc be4 i go through and recreate my issue... will i beable to restore back to how i am now after i wipe and format back to full fat32 (if needed)
Click to expand...
Click to collapse
..........
B-man007 said:
that seems right..
if you have ADB setup, type in
adb logcat
just before installing apps. When it crashes, it should give error messages which we will be able to help you with. Post it here in code tags or post it on pastebin.com
Click to expand...
Click to collapse
currently i dont but i can get it setup again and give a try.. see my nandroid Q please
BopChie said:
..........
currently i dont but i can get it setup again and give a try.. see my nandroid Q please
Click to expand...
Click to collapse
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton
B-man007 said:
Yes to the nandroid but your EXT will not be backed up. make sure you grab the right nandroid folder
if you want ext backup, you will need a BART or SwitchROM backup with the EXT backup
Click to expand...
Click to collapse
ok think i got it solved here... using logcat on a boot after partitioning the card i could see it was hitting a infinite loop and had todo with some prop's i had swapped out for Gnav.. but since that is official on 1.6+ now i was able to reflash cm and sofar so good, installed 10 apps with apps2sd live and notta prob
Thanx a ton
haha ok well its good to know you got it working
yeah so far so good.. 1last q...i have read mixed angles on enabling swap on sd.. i saw some1 say if its there cm4.2.5 will use it.. but i have saw ppl say it needs to be enabled.
I have never saw my mem get lower than 20MB should i even bother with swap?
its not enabled by default, you have to do it yourself. You shouldnt really need it on a cyan ROM.